NEC Corporation (Thailand) Ltd. Contact us : Tel. 0-2526-2460~5 Fax.

0-2529-2133, 0-2529-2466
Laboratory's Scopes of Calibration

Field of Properties of Measured Range Calibration Methods

Calibration
Electrical Voltage / Current / Power Calibrations Group
DC Volt Meters / Panel Meters DCV: 0-1100V Direct measurement
AC Volt Meters / Panel Meters DCA: 0-100A
DC Current Meters / Panel Meters ACV: Up-1100V (10Hz-1MHz)
AC Current Meters / Panel Meters ACA: Up-50A (10Hz-30kHz)
DC Volt/Current Meters
AC Volt/Current Meters
Digital Panel Meters
Circuit Testers / Analog Testers DCV: 0-1100V Direct measurement / Direct comparison
Electrometers / Pico Ammeters DCA: 0-100A
Digital Multimeters (Not over 4 digit) ACV: Up-1100V (10Hz-30MHz)
Digital Multimeters (Not over 5 digit) ACA: Up-50A (10Hz-30kHz)
Digital Multimeters (Not over 6 digit) DCR: 0-1TΩ
Digital Multimeters (Not over 7 digit) Frequency: 1Hz-40GHz
Digital Multimeters (Not over 8 digit) Capacitance: Up-100mF
Digital Multimeters (Over 8 digit) Inductance: 100µH-1H
(Equivalent to 3458A or Fluke 8508A)
AC Measurement Standard ACV: Up-1100V (10Hz-30MHz) AC-DC Difference Transfer
(Fluke 5790A)
AC Measurement Standard + Wideband
(Fluke 5790A+WB Option)
DC Voltage Reference Standard Cell DCV: 1V, 1.018V, 10V Comparison / Differential
(Fluke 732A)
DC Voltage Reference Standard Cell DCV: 1.018V, 10V
(Fluke 732B)
DC Volt/Current Generators (Low accuracy) DCV: 0-1000V Manufacturer's performance verification tests
DC Volt/Current Generators (High accuracy) DCA: 0-100A
AC Volt/Current Generators (Low accuracy) ACV: Up-3V (10Hz-30MHz)
AC Volt/Current Generators (High accuracy) >3-220V (10Hz-1MHz)
Multi-Calibrators >220-1100V (10Hz-100kHz)

Page 1 of 22
 NEC Corporation (Thailand) Ltd. Contact us : Tel. 0-2526-2460~5 Fax. 0-2529-2133, 0-2529-2466
Laboratory's Scopes of Calibration

Field of Properties of Measured Range Calibration Methods

Calibration
Electrical Multi-Product Calibrators ACA: Up-50A (10Hz-10kHz) Manufacturer's performance verification tests
(Fluke 5500A, Wavetek 9100) DCR: 0-1GΩ
Multi-Product Calibrators + Scope Option Capacitance:
(Fluke 5500A, Wavetek 9100) 1pF-100mF (20Hz-13MHz)
Multi-Product Calibrators Temperature Indicator:
(Fluke 5520A) All types
Multi-Product Calibrators + Scope Option Phase: 0-360 Deg.
(Fluke 5520A) Freq: 1Hz-40GHz
Multi-Function Calibrators RF Power: +20dBm to -100dBm
(Fluke 5700A, 5720A, Wavetek 4800A) RF Impedance: 50Ω, 75Ω,
Multi-Function Calibrators + Wideband Option 600Ω, 1MΩ
(Fluke 5700A, 5720A, Wavetek 4800A)
Amplifier (Fluke 5725A)
Oscilloscope Calibrators
(Fluke 5800A, Wavetek 9500)
Oscilloscope Calibrators
(Fluke 5820A)
Regulated DC Power Supply (Single O/P) DCV: 0-1000V Direct measurement / Ohm's Law
Regulated DC Power Supply (Multi O/P) DCA: 0-100A
AC Power Supply (Single O/P) ACV: Up-10kV (10Hz-100kHz)
AC Power Supply (Multi O/P) ACA: Up-50A (10Hz-1kHz)
Electronic Load
Digital High Volt Meters DCV: 0-10kV Direct measurement / Direct comparison to high
Analog High Volt Meters ACV: Up-10kV (50Hz-60Hz) voltage standard
Electrostatic Volt Meters (Digital / Analog)
High Voltage Dividers
High Voltage Probe
Withstanding Voltage Testers
Withstanding Voltage / Insulation Testers
Curr. Calibrator for W. Testers

Page 2 of 22
 NEC Corporation (Thailand) Ltd. Contact us : Tel. 0-2526-2460~5 Fax. 0-2529-2133, 0-2529-2466
Laboratory's Scopes of Calibration

Field of Properties of Measured Range Calibration Methods

Calibration
Electrical Portable Noise Checkers and Monitors DCV: 0-10kV Direct measurement / Direct comparison to high
Impulse Noise Voltmeters ACV: Up-10kV (50Hz-60Hz) voltage standard
Damped-Oscillatory Wave Simulators
Fast Transient Noise Simulators
Electrostatic Discharge Simulators
Voltage Dip and Up Simulator
Lightning Surge Simulator
Electronic Volt-Meters (< 10MHz) (Single O/P) ACV: Up-3V (10Hz-30MHz) Direct measurement / Direct comparison
Electronic Volt-Meters (< 10MHz) (Multi O/P) >3-220V (10Hz-1MHz)
Wideband Electronic Volt-Meters (>10MHz) >220-1100V (10Hz-100kHz)
AC/DC Clamp Meters (Clamp only) DCA: 0-1000A Direct measurement
AC/DC Clamp Meters (Include multi-meter) ACA: Up-1000A (10Hz-1kHz)
Portable AC/DC Watt Meters (Analog Type) DCW: 0-36kW Direct measurement
Digital DC Watt Meters (DCV: 0-1000V, DCA: 0-36A)
Digital AC Watt Meters ACW: Up-50kW
Digital AC/DC Watt Meters (ACV: Up-1000V, ACA: Up-50A,
45Hz-65Hz, PF 0.3-1)
DC Potentiometers DCV: 0-1000V Direct measurement
Electronic Galvanomiters DCA: 0-36A
Transducers & Volt / Current Transformers
Pen Recorders (Less than 4 pens) DCV: 0-1000V Direct measurement
Pen Recorders (More than 4 pens) DCA: 0-36A
X-Y Recorders
Data Loggers (only V/A/R and Temp)
Oscillographic Recorders
Beamcorders / Photocorders
Industrial Recorders

Page 3 of 22
 NEC Corporation (Thailand) Ltd. Contact us : Tel. 0-2526-2460~5 Fax. 0-2529-2133, 0-2529-2466
Laboratory's Scopes of Calibration

Field of Properties of Measured Range Calibration Methods

Calibration
Electrical Oscilloscope and Waveform Analysis Equipment Calibrations Group
Analog Oscilloscopes Freq. Standard: Direct measurement / Direct comparison
Synchroscopes / Memoryscopes 0.5MHz, 1MHz, 5MHz, 10MHz
Digitizing Oscilloscopes Freq. Bandwidth:
Sampling Oscilloscopes DC-26.5GHz
X-Y Scopes / X-Y Monitor Scopes Period Range: 2ns-5s
Oscilloscopes to (High) Voltage Probe DCV: 0-10kV
Oscilloscopes to Voltage Isolators ACV: Up-7kV
Oscilloscopes to Current Probes Impedance:
Oscilloscopes to Differential Probes 50Ω, 75Ω, 600Ω, 1MΩ
Oscilloscopes to Active Probes
Spectrum Analyzers
Digital Spectrum Analyzers
Tracking Genenrators
Dynamic Signal Analyzers
FFT Analyzers
Servo Analyzers
RF Field Analyzers
Component Calibration Group (Resistance / Capacitance / Inductance)
Eart Testers (Analog Type) DCR: 0-1TΩ Direct measurement / Direct comparison
Eart Testers (Digital Type)
Low Ohm Testers
Ohm Meters (Analog Type)
Ohm Meters (Digital Type)
Insulation Meters (Analog Type)
Insulation Meters (Digital Type)
Super Megaohm Meters
Wrist Strap Footwere System Testers
Wheatstone Bridge
Double Bridge

Page 4 of 22
 NEC Corporation (Thailand) Ltd. Contact us : Tel. 0-2526-2460~5 Fax. 0-2529-2133, 0-2529-2466
Laboratory's Scopes of Calibration

Field of Properties of Measured Range Calibration Methods

Calibration
Electrical Resistance Deviation Meters DCR: 0-1TΩ Direct measurement / Direct comparison
Resistance Ratio Testers
Current Shunts DCA: 0-100A As choose of
Standard Resistors (Single Value) DCR: 0-1TΩ - Volt. inter-comparison
Standard Resistors (Multi Values) DCV: 0-1000V - Volt ratio-comparison
Decade Resistance Box - Sub-stitution
Fixed Value Resistors (Low accuracy) - Direct measurement
- Ohm's law
AC Current Shunt ACA: Up-20A (10Hz-30kHz) Comparison with AC-DC difference transfer.

Fixed Value Capacitors (Low accuracy) Capacitance: Direct measurement / Direct comparison.
Standard Capacitor (Single Value) 1pF-100mF (20Hz-13MHz)
Standard Capacitor (Multi Values) AC Resistance:
Decade Capacitors 1mΩ-100kΩ (DC-13MHz)
4-T Standard Air Capacitors Set (HP 16380A)

4-T Standard Air Capacitors Set (HP 16380C)

Calibration L-R Standard

(HP 16074A)
4-T Pair Standard Resistors Set
(HP 42030A)
Fixed Value Inductors (Low accuracy) Inductance: Direct measurement / Direct comparison
Standard Inductors (Single Value) 100µH-10H (100Hz-10kHz)
Standard Inductors (Multi Values)
Decade Inductors
Capacitance Meters (Low accuracy) Capacitance: Direct measurement / Direct comparison
Capacitance Meters (High accuracy) 1pF-100mF (20Hz-13MHz)
Impedance Meters / Vector Impedance Meters Inductance:
Impedance Analyzers 100µH-10H (100Hz-10kHz)

Page 5 of 22
 NEC Corporation (Thailand) Ltd. Contact us : Tel. 0-2526-2460~5 Fax. 0-2529-2133, 0-2529-2466
Laboratory's Scopes of Calibration

Field of Properties of Measured Range Calibration Methods

Calibration
Electrical Impedance Gain / Phase Analyzers AC Resistance: Direct measurement / Direct comparison
Impedance Deviation Meters / Comparators 1mΩ-1MΩ (DC-13MHz)
Crystal Impedance Meters
Capacitance Bridge
Inductance Meters
Inductance Bridge
LCR Deviation Meters / Comparators Capacitance: Direct measurement / Direct comparison
LCR Meters / LCZ Meters 1pF-100mF (20Hz-13MHz)
LCR Meters (Pocket Type) Inductance:
Universal Bridge 100µH-10H (100Hz-10kHz)
AC Resistance:
1mΩ-1MΩ (DC-13MHz)

Diode Curve Tracers DCV: 0-1000V Direct measurement / Direct comparison

Transistor Curve Tracers DCA: 0-36A
Semiconductor Testers Capacitance:
Semiconductor Parameter Analyzers 1pF-100mF (20Hz-13MHz)
Modular DC Sources / Monitors Inductance:
Ratio Testers 100µH-10H (100Hz-10kHz)
Fo & Ze Meters AC Resistance:
1mΩ-1MΩ (DC-13MHz)

Page 6 of 22
 NEC Corporation (Thailand) Ltd. Contact us : Tel. 0-2526-2460~5 Fax. 0-2529-2133, 0-2529-2466
Laboratory's Scopes of Calibration

Field of Properties of Measured Range Calibration Methods

Calibration
Frequency Frequency and Time Calibrations Group
& Quartz Oscillators (TCXO Class, < 5E-7) Freq. Standard: Direct measurement and direct comparison
RF Power Quartz Oscillators (MCXO Class, < 5E-8) 0.5MHz, 1MHz, 5MHz, 10MHz to Frequency Standard from Rubidium Freq.
Quartz Oscillators (OCXO Class, < 5E-9) Freq. Range: Standard and GPS Freq. Ref. Receiver
Rubidium Frequency Standards ( < 2E-10) 1Hz-40GHz
GPS Frequency Ref. Receivers
Freq./Universal Counters ( < 5E-6)
Freq./Universal Counters ( < 5E-7)
Freq./Universal Counters ( < 5E-8)
Freq./Universal Counters ( < 5E-9)
Freq./Universal Counters ( > 5E-9)
Microwave Frequency Meters
Frequency Converters
Frequency Multipliers
Frequency Comparators
Modulation Domain/Time Interval Analyzer
Tachometers
Stroboscopes
Revolutionmeters
Digital Timers
Timers
Stopwatches
Watches & Clocks
Phase Meters
Vector Voltmeters / Gain-Phase Meters
Delay Line / Phase Shifters

Page 7 of 22
 NEC Corporation (Thailand) Ltd. Contact us : Tel. 0-2526-2460~5 Fax. 0-2529-2133, 0-2529-2466
Laboratory's Scopes of Calibration

Field of Properties of Measured Range Calibration Methods

Calibration
Frequency Communications Equipment Calibration Group
& Signal Generators Freq. Standard: As choose of
RF Power Digital Modulation Signal Generators 0.5MHz, 1MHz, 5MHz, 10MHz - In-house methods of laboratory or
Microwave Signal Generators Freq. Range: - Maker's performance verification tests
Function Generators 1Hz-40GHz
Frequency Synthesizers (Low accuracy) AC Level: Up-10V (1Hz-10MHz)
Frequency Synthesizers (High accuracy) RF Level:
Sweep Oscillators Up-10V (10MHz-18.6GHz)
Synthesized Sweep Oscillator RF Attenuator:
Pulse Generators Up-100dB (DC-40GHz)
Universal Sources RF Impedance:
Clock Generators 50Ω, 75Ω, 600Ω (DC-40GHz)
Pulse Pattern Generators
Data Generators / Word Generators
Speaker Test Oscillators
Time Synthesizers
Phase Generators
Noise Generators (White/Pink)
IF/RF Noise Generators
FM Linear Detectors
FM/AM Modulation Meters
Modulation Analyzers
Modulation Analyzer With Power Sensors
Measuring Receivers
Measuring Receiver With Power Sensors
Receiver / Test Receivers
Interference / Field Strength Meters
TV Field Intensity Meters / CN Checkers
Radio Communication Analyzers
Radio Test Set

Page 8 of 22
 NEC Corporation (Thailand) Ltd. Contact us : Tel. 0-2526-2460~5 Fax. 0-2529-2133, 0-2529-2466
Laboratory's Scopes of Calibration

Field of Properties of Measured Range Calibration Methods

Calibration
Frequency Cellular Testers / MCA Testers Freq. Standard: As choose of
& Personal Checkers / Output Testers 0.5MHz, 1MHz, 5MHz, 10MHz - In-house methods of laboratory or
RF Power Digital Modulation Radio Communication Analyzers Freq. Range: - Maker's performance verification tests
Digital Mobile Radio Transmitter Testers 1Hz-40GHz
Modulation Spectrum Analyzers AC Level: Up-10V (1Hz-10MHz)
Signalling Testers RF Level:
PDC/PHS Testers Up-10V (10MHz-18.6GHz)
Digital Modulators RF Attenuator:
Standard Level Meters Up-100dB (DC-40GHz)
Level Meters RF Impedance:
Selective Level Meters 50Ω, 75Ω, 600Ω (DC-40GHz)
Psophometers / Noise Meters
Noise Loading Test Set
Attenuators (600Ω, 75Ω Balance, f < 1.3GHz)
Attenuators (75Ω, 50Ω Un-balance, f < 1.3GHz)
Filters (LP / HP / BP)
Universal Filters
Key Box / Level Comparators
Switching Unit / Key Box With Attennuator
Distortion Meters
Distortion Calibrators
Distortion Meters With Oscillators
Audio Analyzers
Error Rate Testers
Error Detectors
Error Analyzers
Repeater Testers
Jitter Generator Receivers
PCM Line Test Set
PCM Multiplex Testers

Page 9 of 22
 NEC Corporation (Thailand) Ltd. Contact us : Tel. 0-2526-2460~5 Fax. 0-2529-2133, 0-2529-2466
Laboratory's Scopes of Calibration

Field of Properties of Measured Range Calibration Methods

Calibration
Frequency DSU Testers Freq. Standard: As choose of
& Digital Transmission Analyzers 0.5MHz, 1MHz, 5MHz, 10MHz - In-house methods of laboratory or
RF Power Superdigital Line Analyzers Freq. Range: - Maker's performance verification tests
PCM Terminal Test Set / PCM Channel Test Set 1Hz-40GHz
Multimedia MUX Analyzers AC Level: Up-10V (1Hz-10MHz)
PCM Codec Analyzers RF Level:
NNI Analyzers Up-10V (10MHz-18.6GHz)
ATM Analyzers RF Attenuator:
SMD Analyzers Up-100dB (DC-40GHz)
PCM/FDM/TDM Analyzers RF Impedance:
Encoders 50Ω, 75Ω, 600Ω (DC-40GHz)
Interface Testers
Code Generators / Code Distortion Generators
Telecom / Datacom Analyzers
Television Test Generators
Modular TV Test Generators
NTSC / PAL Generators
Television Test Digital Generators
Television Color Bar / Pattern Generators
Video Sweep Generators
Related Television Test Generators
Television Monochrome / Color Monitors
Television Waveform Monitors
Television Vector Waveforms Monitors
Video Analyzers
Multiplex Video Analyzers
Video Noise Meters
Stereo Modulators
Telephone Unit Testers
Telephone Dial Testers

Page 10 of 22
 NEC Corporation (Thailand) Ltd. Contact us : Tel. 0-2526-2460~5 Fax. 0-2529-2133, 0-2529-2466
Laboratory's Scopes of Calibration

Field of Properties of Measured Range Calibration Methods

Calibration
Frequency MF-DP Dial Memory Testers Freq. Standard: As choose of
& Telephone Impedance Testers 0.5MHz, 1MHz, 5MHz, 10MHz - In-house methods of laboratory or
RF Power PBX Testers Freq. Range: - Maker's performance verification tests
Transmitter Sensitivity Testers 1Hz-40GHz
Bell Ringer Generators AC Level: Up-10V (1Hz-10MHz)
Impulse Senders RF Level:
Bon.DSU/OCU Testers Up-10V (10MHz-18.6GHz)
Wow Flutter Meters RF Attenuator:
CD Jitter Meters Up-100dB (DC-40GHz)
Logic Analyzers RF Impedance:
Logic Analyzer Systems 50Ω, 75Ω, 600Ω (DC-40GHz)
Microwave Equipment and RF Component Calibrations Group
Termination Power Meters Freq. Standard: As choose of
(50Ω, 1Hz-1GHz, Max. 50W) 0.5MHz, 1MHz, 5MHz, 10MHz - In-house methods of laboratory or
Through Line Power Meters Freq. Range: - Maker's performance verification tests
(50Ω, 1Hz-1GHz, Max. 50W) 1Hz-40GHz
Microwave Power Meters + Power Sensors AC Level: Up-10V (1Hz-10MHz)
Power Meters (Indicator only) RF Level:
Power Sensors (Thermocouple and Diod Type) Up-10V (10MHz-18.6GHz)
Thermistor Mounts RF Attenuator:
Peak Power Meters Up-100dB (DC-40GHz)
Modulation Power Meters RF Impedance:
Power Meter Calibrators (Range Calibrator) 50Ω, 75Ω, 600Ω (DC-40GHz)
Network Analyzers
Network Analyzers + S-Parameter Test Sets
Network / Spectrum Analyzers
RF Analyzers
Scalar Network Analyzers
Transmission / Reflection Test Sets
VSWR Bridge / Reflection Bridge

Page 11 of 22
 NEC Corporation (Thailand) Ltd. Contact us : Tel. 0-2526-2460~5 Fax. 0-2529-2133, 0-2529-2466
Laboratory's Scopes of Calibration

Field of Properties of Measured Range Calibration Methods

Calibration
Frequency Return Loss Testers Freq. Standard: As choose of
& SWR Meters 0.5MHz, 1MHz, 5MHz, 10MHz - In-house methods of laboratory or
RF Power Fixed Attenuators Freq. Range: - Maker's performance verification tests
Three / Four Port Junction Pad 1Hz-40GHz
Step Attenuator (50Ω, DC-1.3GHz) AC Level: Up-10V (1Hz-10MHz)
Terminations / Calibration Kit RF Level:
Directional Couplers Up-10V (10MHz-18.6GHz)
Directional Detectors RF Attenuator:
RF Detectors, RF Filters Up-100dB (DC-40GHz)
Power Splitters RF Impedance:
Power Dividers 50Ω, 75Ω, 600Ω (DC-40GHz)
Hybrids
Matching Pad and Impedance Adapters
RF Amplifiers

Page 12 of 22
 NEC Corporation (Thailand) Ltd. Contact us : Tel. 0-2526-2460~5 Fax. 0-2529-2133, 0-2529-2466
Laboratory's Scopes of Calibration

Field of Properties of Measured Range Calibration Methods

Calibration
Optical Optical Calibrations Group
Optical Attenuator Wavelength: Direct measurement
Wavelength Meter (per Module) 1310, 1550nm to Optical Power Sensor
Lightwave Meter (per module) Level: and Optical Wavelength
Optical Head 0 to -60dBm
Optical Power Meter (Measuring only)
Optical Power Meter (Measuring & Source)
Infiniium Digital Communication Analyzer (per module)
Optical Spectrum Analyzer
SONET Transmission Test Set
Communications Performance Analyzer
Communication Signal Analyzer (CSA Series)
OTDR
Nettek OTDR
Bit Error Rate Tester

Page 13 of 22
 NEC Corporation (Thailand) Ltd. Contact us : Tel. 0-2526-2460~5 Fax. 0-2529-2133, 0-2529-2466
Laboratory's Scopes of Calibration

Field of Properties of Measured Range Calibration Methods

Calibration
Gauge Block Gauge Blocks [Steel, Ceramic, Carbide] 0.1 mm-100 mm - JIS B 7506-1997
Grade: 0, 1, 2 Cal. central deviation only and variation in length

Gauge Blocks [Steel, Ceramic, Carbide] 0.1 mm-100 mm - JIS B 7506-1997

Grade: 0, 1, 2 Cal. central deviation and variation in length

Long Gauge Blocks [Steel, Ceramic, Carbide] > 100 mm-300 mm Comparison method Cal. central deviation only.
Grade: 0, 1, 2

Long Gauge Blocks [Steel, Ceramic, Carbide] > 100 mm-300 mm Comparison method Cal. central deviation only.
Grade: 0, 1, 2

Dimensional Dial Gauges / Digital Indicators Up - 25 mm JIS B 7503-1997

Up - 50 mm
Up - 75 mm
Up - 100 mm
Dial Test Indicators Up - 1 mm JIS B 7533-1990
Microindicators Up - 0.5 mm JIS B 7519-1976
Cylinder Gauges / Bore Gauges 6 mm - 300 mm JIS B 7515-1982

Outside / Inside Micrometers Up - 25 mm JIS B 7502-1994

25 mm - 200 mm
200 mm -1000 mm
Indicating Micrometer Up - 25 mm JIS B 7520-1981
25 mm - 100 mm
100 mm -1000 mm
Depth Micrometer Up - 300 mm JIS B 7544-1994

Page 14 of 22
 NEC Corporation (Thailand) Ltd. Contact us : Tel. 0-2526-2460~5 Fax. 0-2529-2133, 0-2529-2466
Laboratory's Scopes of Calibration

Field of Properties of Measured Range Calibration Methods

Calibration
Dimensional Vernier Caliper (Vernier, Dial, Digital Types) Up - 300 mm JIS B 7507-1993
Up - 600 mm
Up - 1000 mm
Up - 1500 mm
Gear Tooth Vernier Calipers Up - 100 mm JIS B 7531-1982
Height Gauges (Vernier, Dial, Digital Types) Up - 300 mm JIS B 7517-1993
Up - 600 mm
Up - 1000 mm
Up - 1500 mm
Depth Gauges (Vernier, Dial, Digital Types) Up - 500 mm JIS B 7518-1993
Feeler Gauges 0.01 mm - 20 mm JIS B 7524-1992

Thickness Gauges (Dial, Digital Types) Up - 100 mm Direct measurement to gauge block

Coating Thickness Plates (Film/Copper) Up - 10 mm Direct measurement to Laser Hologauge

Coating Thickness Gauges 17 µm - 251 µm Direct comparison to Laser Hologauge

(without customer thickness plate)
Holtests 2 mm - 100 mm Direct measurement to Standard Ring Gauge

Electrical Comparators / Mu-Checkers Up - 500 mm JIS B 7536-1982

(include: Probe and Display Unit)
Universal Length Machines (ULM) Up - 500 mm Comparison to Gauge Blocks
Electric Levels Full range JIS B 7510-1993
Spirit Levels Full range JIS B 7510-1993
Precision Squares (up to 100mm) Grade 1, 2 JIS B 7526-1977
Precision Squares (up to 1,000mm) Grade 1, 2 JIS B 7526-1977
o
Bevel Protactors (Analog / Digital) 0-360 Direct measurement by angle gauge standard
Combination Sets (Analog / Digital) Full range Direct measurement by angle gauge standard
Setting Rod for Micrometers Up - 1000 mm Comparison to Gauge Blocks

Page 15 of 22
 NEC Corporation (Thailand) Ltd. Contact us : Tel. 0-2526-2460~5 Fax. 0-2529-2133, 0-2529-2466
Laboratory's Scopes of Calibration

Field of Properties of Measured Range Calibration Methods

Calibration
Dimensional Micrometer Heads Up - 50 mm JIS B 7502-1994
Calibration Testers (Analog / Digital) Up - 50 mm Direct measurement by Laser Hologauge

Measuring Microscopes Up - 300 mm JIS B 7153-1995 by standard scale

Micrometer Microscopes Up - 10 mm JIS B 7150-1977 by Objective Micrometer

Profile Projectors Up - 300 mm JIS B 7153-1995 and JIS B 7184-1972

Scale Lubes Up - 100 mm Comparison to Standard Scale
Digimatic Scale Units Up - 1000 mm Comparison to Standard Gauge Block
Metal Rules Up - 1000 mm JIS B 7516-1987
Up - 2000 mm
Up - 5000 mm (above)
Steel Tape Measures Up - 1000 mm JIS B 7512-1993
Up - 2000 mm
Up - 5000 mm (above)
Textile Tape Measures Up - 1000 mm JIS B 7522-1993
Up - 2000 mm
Up - 5000 mm (above)
Height Masters (Analog / Digital) Up - 300 mm ISO 7863-1984
Up - 600 mm comparison gauge block
Riser Blocks Up - 150 mm ISO 7863-1984
Up - 300 mm comparison gauge block
Up - 600 mm
Caliper Checkers Up - 300 mm ISO 7863-1984
Up - 600 mm comparison gauge block
Depth Micro Checkers Up - 300 mm ISO 7863-1984
comparison gauge block

Page 16 of 22
 NEC Corporation (Thailand) Ltd. Contact us : Tel. 0-2526-2460~5 Fax. 0-2529-2133, 0-2529-2466
Laboratory's Scopes of Calibration

Field of Properties of Measured Range Calibration Methods

Calibration
Dimensional Surface Plates < 300 mm x 300 mm JIS B 7513-1992
[Site calibration avialable] < 500 mm x 500 mm by Electric Level
[Excluded on-site expenses] > 500 mm x 500 mm
(above)
Steel Straightedges as JIS B 7514-1977 JIS B 7514-1977
Go-No Go Plain Plug Gauges Up - 100 mm JIS B 7420-1997
Go-No Go Thread Plug Gauges as JIS B 0261-1978 JIS B 0261-1978
by 3-wire
3-Wires as JIS B 0271-1992 JIS B 0271-1992
Pin Gauges Up - 100 mm JIS B 0261-1978

Laser Scan Micrometers 0.1 mm - 25 mm Comparison to Standard pin gauge

Flatness Testers Up - 600 mm Comparison to Surface Straightedge
CMMs [Site calibration only] 10 mm - 610 mm ISO 10360-2

Page 17 of 22
 NEC Corporation (Thailand) Ltd. Contact us : Tel. 0-2526-2460~5 Fax. 0-2529-2133, 0-2529-2466
Laboratory's Scopes of Calibration

Field of Properties of Measured Range Calibration Methods

Calibration
Torque Mechanical Calibrations Group
Torque Drivers Up-200 kgf.cm ISO 6789-1992
Torque Wrenches Up-2000kgf.cm
Torque Gauges Up-400kgf.cm Direct measurement to weight + arm
Torque Testers / Torque Meters Up - 1000kgf.cm
Force Push-Pull Scales / Force Gauges Up-200kgf Direct measurement by standard weight
Handy Force Gauges (With load cell sensor) (or equivalent unit)
Tension Gauges
Dial Tension Gauges
Tensile Machines [Compress and tension modes] Up-100kN Direct comparison with standard force transducer
(Site Calibration) (or equivalent unit)

Page 18 of 22
 NEC Corporation (Thailand) Ltd. Contact us : Tel. 0-2526-2460~5 Fax. 0-2529-2133, 0-2529-2466
Laboratory's Scopes of Calibration

Field of Properties of Measured Range Calibration Methods

Calibration
Mass Mechanical Calibrations Group
Weight Class OIML F1 [Range: 1g-20kg] 1mg-200kg OIML R-111-2
Weight Class OIML F1 [Range: <1g, >20kg]
Weight Class OIML F2 [Range: 1mg-20kg]
Weight Class OIML F2 [Range: >20kg]
Weight Class OIML M1-2-3 [Range: 1mg-20kg]
Weight Class OIML M1-2-3 [Range: > 20kg]
Electronic Balances [Resolution: < 0.1mg] Up-100g UKAS LAB 14-2001
Electronic Balances [Resolution: > 0.1mg] Up-200kg
Spring Balances
Trip Balances (2 Pan Balances) Up-200kg Direct measurement by standard weight
Suspension Spring Balances
Beam Balances

Page 19 of 22
 NEC Corporation (Thailand) Ltd. Contact us : Tel. 0-2526-2460~5 Fax. 0-2529-2133, 0-2529-2466
Laboratory's Scopes of Calibration

Field of Properties of Measured Range Calibration Methods

Calibration
Pressure Pnuematic Pressure Gauges Up-50kgf.cm-2 BSEN 837-1 : 1998
Hydralic Pressure Gauges (or equivalent unit)
Pressure Calibrators Up-500PSI Comparison method
Dead Weight Testers
Hardness Rubber Hardness Testers [JIS, ASTM] 0-100o In-house: MC-0084-01-05
Duro Meter Testers
Vicker Hardness Machines (Site calibration) HMV 700 JIS B 7725-1997
Rockwell Hardness Macines HRC 30, 45, 60 JIS B 7726-1997
(Site calibration) HRB 30, 90
pH pH Meter (Indicator type) All pH ASTM E70-97 and BS 1647-1984 by
DCV standard and
pH Meters + Sensors pH 4, 7, 10 pH solution

Others Conductivity Meters + Probes 0.1nS - 1S Standard solution and S = 1/Resistance

Viscosity Meters (Max. 3 Spindle) 610.8-147877mPa.s Standard viscosity solution

Roughness Testing Machines 4.5µRa JIS B 0651-1996 by standard specimen

Roundness Testing Machines JIS B 7451-1997 by master ball

Page 20 of 22
 NEC Corporation (Thailand) Ltd. Contact us : Tel. 0-2526-2460~5 Fax. 0-2529-2133, 0-2529-2466
Laboratory's Scopes of Calibration

Field of Properties of Measured Range Calibration Methods

Calibration
Temperature Temperature Indicator / Simulator Calibrations Group
Soldering Iron Testers TC: All types EA-10/11
Dip Testers RTD: All types
Reflow Checkers (Without sensor)
Temperature Recorders
Hybrid Recorders
Temperature Controllers
RTD Indicators
RTD Simulators
Thermocouple Simulators (No cold junction)
Thermocouple Simulators (With cold junction)
Thermometers Calibrations Group
Digital/Analog Thermometers + Sensors Temp: -20oC-1200oC Comparison with SPRT
Surface Thermometers + Sensors
RTD Sensors (High accuracy type) ASTM E644-98 by
o
(Best uncertainty: 0.05 C) comparison with SPRT
RTD Sensors (Low accuracy type)
(Uncertainty: >0.15oC)
Thermocouple Sensors [Range: -20 oC-660oC] ASTM E220-86 by
o
(Uncertainty: < 0.3-0.4 C) comparison with SPRT
o o
Thermocouple Sensors [Range: -20 C-660 C]
(Uncertainty: > 0.4oC)
Thermocouple Sensors [Range: > 660 oC] by sub-contract
Liquid-in-glass Thermometers ASTM E77-92 by
o o
(Total immersion type: -20 C - 150 C) comparison with SPRT
Liquid-in-glass Thermometers by sub-contract
o
(Total immersion type: > 150 C)
Liquid-in-glass Thermometers (Partial immersion type) by sub-contract
o
Thermo-Hygrographes [0-98 C - 30-90%RH] Comparison method
o
Thermo-Hygrometers [0-98 C - 30-90%RH]

Page 21 of 22
 NEC Corporation (Thailand) Ltd. Contact us : Tel. 0-2526-2460~5 Fax. 0-2529-2133, 0-2529-2466
Laboratory's Scopes of Calibration

Field of Properties of Measured Range Calibration Methods

Calibration
Temperature Temperature Source Calibrations Group
Dry Block / Dry-Well Calibrators Temp: -20oC-1200oC EA-10/13
o o
[Range: -20 C-660 C]
Dry Block / Dry-Well Calibrators by sub-contract
o
[Range: > 660 C]
Liquid Calibration Bath ASTM E715-80
o o
[Range: -20 C-140 C]
Liquid Calibration Bath by sub-contract
o
[Range: > 140 C]
Chambers / Ovens (Site calibration) ASTM E145-94 and
o o
[Range: -20 C-200 C] AS2853-1986
Chambers / Ovens (Site calibration) by sub-contract
[Range: > 200-400oC]

Page 22 of 22