Polypropylene: Sub-Group Description Applications Process

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

Polypropylene TI4007G

Sub-group
Impact Copolymer

Description
Extra high izod impact, superior low temperature drop impact

Applications
Suggested uses include profiles, tubing, squeeze bottles

Process
UL temperature index of 100°C

Control Properties: ASTM Method Units Values


Nominal Melt Flow Rate (230°C/2.16kg) D-1238 g/10 min 0.7

Typical Properties: ASTM Method Units Values


Tensile Strength at Yield (2 in/min, 50 mm/min) D-638 psi(MPa) 4,200(29)
Elongation at Yield (2 in/min, 50 mm/min) D-638 % 12.5
Flexural Modulus (0.05 in/min, 1.3 mm/min, 1% D-790A psi(MPa) 175,000(1,207)
secant)
Notched Izod Impact Strength at 23°C D-256A No Break
Instrumented Impact Strength at -29°C D-3763 ft-lbs(J) 22(30)
Rockwell Hardness D-785 R 78

Final Remarks
1. This resin meets the requirements for olefin polymers as defined in 21 CFR, section 177.1520 issued by the Food and Drug Administration. The
additives present meet the applicable regulations.
2. This information reflects typical values obtained in our laboratories, but should not be considered as absolute or as warranted values. Only the
properties and values mentioned on the Certificate of Quality are considered as guarantee of the product.
3. In some applications, Braskem has developed tailor-made resins to reach specific requirements.
4. In case of doubt regarding utilization, or for other applications, please contact Technical Service.
5. The values in this report can be modified without prior communication from Braskem.
6. Braskem polyolefin products do not have additives with heavy metals or organotin-based materials.

Revision Date:
6/20/2013
www.braskem.com

You might also like