Madhav Institute of Technology & Science,

Gwalior – 474 005

Ref. No. ELEX/SSB/ Date: 9/01/2019

Comparative Statement for the purchase of Basic Electronics lab Items

Sub: Purchase of basic electronics lab items

Ref: No. ELEX/SSB/1 dated 04.03.2015

Open tender were invited for procurement of Basic electronics lab items. A meeting was held
on 9/01/2019 to open the offers and prepare the recommendations. Following persons were
present in the meeting:
1. Dr. P.K.Singhal
2. Dr. Laxmi Shrivastava
3. Dr. R.P. Narwaria
4. Prof. Pooja Sahoo

Following vendors submitted their offers:

1. M/s Scientech Technologies Pvt. Ltd. 94, Electronic Complex, Pardesipura, Indore.
2. M/s J.P. Enterprises Daulat Ganj Rd, Dahi Mandi, Sarafa Bazar, Daulat Ganj,
Gwalior.
3. M/s Mars EDPAL Instruments Pvt. Ltd. 3575 timber market Ambala Cantt.
4. M/s Shriji Scientific Works F-1 Shri Sai Niwas Appartment Kanti Nagar near Kushal
Hospital, Gwalior
5. M/s Technical Systems 238, Zone-II, M.P.Nagar,Bhopal.

Sr. Items and specification Rates Quoted by

No J.P. Mars Shriji Scientech Technical
. Enterprises EdPal Scientific Systems
Pvt.Ltd. Works
1. Electronics Workstation 6,96,000/- 7,54,000/- 13,90,00/ 8,37,180/- 5,80,000/-
-
Structural specification of Workstation
should be as follows:
 The basic structure should be made
of 38x38x1.5mm CRC powder
coated pipes for sturdiness.
 The overall dimension of
workstation should not be less than
W = 1220mm, D= 770mm, H=100
mm and thickness 1.2 mm with
handle & separate lock on each
drawer should be provided.
 MS Drawers 03 numbers W = 275
mm, D375 mm, H=1360mm.
  For the panel section, raised back
height of 1200 mm from floor with
matching height support from the
side at a depth 500 mm for
instrument housing with a MS
panelstrip below it for housing
electrical sockets and switches for
external use.
 Two pole MCB (32A-
Havell/Siemens) to be provided for
safety of workstation.
 Workbench should work on Mains
supply: 230V AC, 50Hz.

Technical features of instruments and

facility to be installed on the Workbench
should be as under:
 70MHz 4 analog Channel Digital
Storage Oscilloscope
 25MHz Arbitrary Function
Generator
 Triple Channel Power Supply
 Digital Multimeter
 Temperature controlled Soldering
and De soldering station with SMD
Iron.
 Single unit PC loaded with
interactive teaching, and learning
material and Electronic circuit
design and simulation software.
i) Single user teaching, learning
material with animations and
user interactive simulations
ii) Electronic Circuits Simulation
Software

2. Voltage Stabilizer 14,500/- 25,000/- 16,000/- 15,100/- 22,000/-

 Rating:5 KVA Servo Stabilizer: 2
KVA to 50 KVA (Single Phase)
 Input Voltage Range: (a) 180V
-280V (b) 160V-280V (c) 140V -
280V
 Nominal Output Voltage: 230V
 Output Voltage Accuracy: ±1%
 Line Frequency Variation: 47-53 Hz
 Control: Digital/Analog
 Response Time: 10 mS
 Voltage Correction Rate, (a) Air
Cooled (b) Oil Cooled: 25V /
 Sec.15V/ Sec
 LCD Display (20 x 2 matrix): Date
& Time, Input Voltage, Output
Voltage & Current
 Programmable Features (Through 2-
parallel way resettable passwords):
HV cut-off set.LV cut-off set .O/L
trip set. Time delay set Operating
mode (auto/manual)
 Efficiency: 97%
 Protection: Automatic Switch-Off
against:· Under / Over-Voltage·
Over-Load & Short – Circuit· Single
Phasing
 Surge Protection: Class C Type
Secondary surge Protection
3. SCHMITT Trigger 6,000/- 6,500/- 36,000/- 6,200/- 5,750/-
 In built DC power supply: 12V @
500 mA.
 On panel circuit-diagram.
 Various test point
 Connecting Patch Cords
4. RC-Coupled Amplifier 6,000/- 6,500/- 4800/- 7,360/- 5,750/-
 In built DC power supply: 12V @
500 mA.
 On panel circuit-diagram.
 Various test point
 Connecting Patch Cord
5. Class C Tuned Amplifier Experiment 6,000/- 6,500/- 6400/- 6400/- 5,750/-
Board
 In built DC power supply: 12V @
500 mA.
 On panel circuit-diagram.
 Various test point
 Connecting Patch Cords
 Online Product Tutorial
6. Transistor 12,000/- 13,000/- 11,000/- 11,200/- 11,500/-
Characteristics (CB,CE,CC)
Trainer
 Digital Voltmeter and Ammeter
Ammeter : 1 μA to 200 mA
Voltmeter : 1 mV to 200 V
 Fixed DC power supply : +12,-
12,+5,-5 V DC
 Transister : BC548,2N3906
 Potentiometer : 02 No's
 Various test point
 Connecting Patch Cords

7. Understanding 12,000/- 13,000/- 7800/- 24,800/- 11,500/-

 Characteristics of
MOSFET, FET
 Inbuilt fixed and variable power
supply
 Toggle switch for selection of
variable power supply
 Inbuilt Ammeter and Voltmeter
 Bread board
 Resistance bank
 10 turn potentiometer

8. Hartely and 7,200/- 7,800/- 5800/- 8,550/- 6,900/-

Colpitt Oscillator trainer
 Biasing Voltage : +12 V DC
 Design of Oscillators : Passive
Elements with
 NPN Transistors
 Various test point
 Connecting Patch Cords
9. Wien Bridge 4,800/- 5,200/- 4400/- 13,700/- 4,600/-
Oscillator Trainer
 Power supply : ±12 V DC
 Potentiometer : 470 K, 1W
 Passive elements and Op-amp as
amplifier
 Various test point
 Connecting Patch Cords
10 Phase Shift 4,800/- 5,200/- 4400/- 6,200/- 4,600/-
Oscillator
 DC power supply: 12V @ 500 mA.
 On panel circuit-diagram.
 Various test point
 Connecting Patch Cords

11. Clapp Oscillator 4,800/- 5,200/- 4400/- 7,100/- 4,600/-

 DC power supply: 12V @ 500 mA.
 On panel circuit-diagram.
 Various test point
 Connecting Patch Cords
12 Crystal Oscillator  4,800/- 5,200/- 4800/- 7,360/- 4,600/-
 DC power supply: 12V @ 500 mA.
 On panel circuit-diagram.
 Various test point
 Connecting Patch Cords
13 Multivibrators using IC-555 12,000/- 13,000/- 7800/- 9,600/- 11,500/-
 DC power supply: 12V @ 500 mA.
 On panel three circuits for
Monostable, Astable and
BistableMultivibrators.
  Various test point
 Connecting Patch Cords
14 Function Generator 90,000/- 97,500/- 41,700/- 27,900/- 83,700/-
 1Hz-10 MHz frequency
 Sine, Square, Triangular, Ramp,
pulse, TTL and Serial data output
 20 Vpp output and DC offset.
 40 MHz frequency counter
 50Ω impedence
 20/40/60 dB attenuation
 Rise and Fall time ≤ 50 nsec
 RS232 interface
15 Regulated Variable Dual Power 48,000/- 52,000/- 56,000/- 48,400/- 43,600/-
Supply
 Three floating, independent DC
supply voltages
 DC outputs 0 - 30 V, 0 ± 15 V (dual
tracking) and 5 V, 1 A each
 Constant Voltage and Constant
Current operation
 Digital display for voltage and
current
 Adjustable current limiter
16 Digital Multimeter 7,200/- 7,800/- 9,600/- 5,700/- 6,000/-
 DC Voltage:
200mV/2V/20V/200V/600V
o Accuracy: ±(0.5% +3)
 AC Voltage: 200V/600V
o Accuracy: ±(1.2% +10)
 DC Current: 20µA/200 µA
/2mA/20mA/200mA. ±(1.0% +3)
 AC Current: 200 mA /2mA /
20mA/200mA/10A ±(1.0% +3)
 Resistance: 200Ω/2k Ω/20k Ω/200k
Ω/2M Ω
 Temperature: -20 to 1000oC.
Total Cost 9,36,100IN 10,23,400I 15,75,50 10,42,750I 8,12,350I
R+168,498/- NR+1,84,2 0INR+2, NR+1,87, NR+1,46,
GST 12/-GST 83,590/- 695/-GST 223/-GST
GST

According to the comparative, the rates quoted by M/s Technical Systems238, Zone-II, M.P.
Nagar, Bhopal are the lowest. The lowest rates are made bold and underline. Hence, it is
recommended that the order may be placed with M/s Technical Systems238, Zone-II, M.P.
Nagar, Bhopal.

(Dr. P.K Singhal) (Dr. Laxmi Shrivastava)

 (Prof. Pooja Sahu) (Dr. R.P. Narwaria)

Submitted for approval to:

Dr. R. K. Pandit
Director

Madhav Institute of Technology & Science, Gwalior – 474 005

Ref. No. ELEX/SSB/ Date: 27/4/2015

NOTE-SHEET

Sub: Purchase of projector/computer and related items

Ref: No. ELEX/SSB/1 dated 04.03.2015 and comparative statement dated 27/04/2015

The rate and vendor for required items are approved by the process of open tender. Following
is the requirement:
S No Item with specification Rate Qty Amount
1. Electronics Workstation 2,90,000/- 02 5,80,000/-
Structural specification of Workstation should be
as follows:
 The basic structure should be made of
38x38x1.5mm CRC powder coated pipes for
sturdiness.
 The overall dimension of workstation should
not be less than W = 1220mm, D= 770mm,
H=100 mm and thickness 1.2 mm with handle
& separate lock on each drawer should be
provided.
 MS Drawers 03 numbers W = 275 mm, D375
mm, H=1360mm.
 For the panel section, raised back height of
1200 mm from floor with matching height
support from the side at a depth 500 mm for
instrument housing with a MS panel strip
below it for housing electrical sockets and
 switches for external use.
 Two pole MCB (32A-Havell/Siemens) to be
provided for safety of workstation.
 Workbench should work on Mains supply:
230V AC, 50Hz.

Technical features of instruments and facility to

be installed on the Workbench should be as under:
 70MHz 4 analog Channel Digital Storage
Oscilloscope
 25MHz Arbitrary Function Generator
 Triple Channel Power Supply
 Digital Multimeter
 Temperature controlled Soldering and De
soldering station with SMD Iron.
 Single unit PC loaded with interactive
teaching, and learning material and Electronic
circuit design and simulation software.
iii)Single user teaching, learning material
with animations and user interactive
simulations
iv)Electronic Circuits Simulation Software

2. Voltage Stabilizer 22,000/- 01 22,000/-

 Rating:5 KVA Servo Stabilizer: 2 KVA to 50
KVA (Single Phase)
 Input Voltage Range: (a) 180V -280V (b)
160V-280V (c) 140V - 280V
 Nominal Output Voltage: 230V
 Output Voltage Accuracy: ±1%
 Line Frequency Variation: 47-53 Hz
 Control: Digital/Analog
 Response Time: 10 mS
 Voltage Correction Rate, (a) Air Cooled (b)
Oil Cooled: 25V / Sec.15V/ Sec
 LCD Display (20 x 2 matrix): Date & Time,
Input Voltage, Output Voltage & Current
 Programmable Features (Through 2-parallel
way resettable passwords): HV cut-off set.LV
cut-off set .O/L trip set. Time delay set
Operating mode (auto/manual)
 Efficiency: 97%
 Protection: Automatic Switch-Off against:·
Under / Over-Voltage· Over-Load & Short –
Circuit· Single Phasing
 Surge Protection: Class C Type Secondary
surge Protection
3. SCHMITT Trigger 2,875/- 02 5,750/-
 In built DC power supply: 12V @ 500 mA.
  On panel circuit-diagram.
 Various test point
 Connecting Patch Cords
4. RC-Coupled Amplifier 2,875/- 02 5,750/-
 In built DC power supply: 12V @ 500 mA.
 On panel circuit-diagram.
 Various test point
 Connecting Patch Cord
5. Class C Tuned Amplifier Experiment Board 2,875/- 02 5,750/-
 In built DC power supply: 12V @ 500 mA.
 On panel circuit-diagram.
 Various test point
 Connecting Patch Cords
 Online Product Tutorial
6. Transistor 5,750/- 02 11,500/-
Characteristics (CB,CE,CC)
Trainer
 Digital Voltmeter and Ammeter
Ammeter : 1 μA to 200 mA
Voltmeter : 1 mV to 200 V
 Fixed DC power supply : +12,-12,+5,-5 V DC
 Transister : BC548,2N3906
 Potentiometer : 02 No's
 Various test point
 Connecting Patch Cords

7. Understanding 5,750/- 02 11,500/-

Characteristics of
MOSFET, FET
 Inbuilt fixed and variable power supply
 Toggle switch for selection of variable power
supply
 Inbuilt Ammeter and Voltmeter
 Bread board
 Resistance bank
 10 turn potentiometer

8. Hartely and 3,450/- 02 6,900/-

Colpitt Oscillator trainer
 Biasing Voltage : +12 V DC
 Design of Oscillators : Passive Elements with
 NPN Transistors
 Various test point
 Connecting Patch Cords
9. Wien Bridge 2300/- 02 4,600/-
Oscillator Trainer
 Power supply : ±12 V DC
 Potentiometer : 470 K, 1W
 Passive elements and Op-amp as amplifier
  Various test point
 Connecting Patch Cords
10. Phase Shift 2300/- 02 4,600/-
Oscillator
 DC power supply: 12V @ 500 mA.
 On panel circuit-diagram.
 Various test point
 Connecting Patch Cords
11. Clapp Oscillator 2300/- 02 4,600/-
 DC power supply: 12V @ 500 mA.
 On panel circuit-diagram.
 Various test point
 Connecting Patch Cords
12. Crystal Oscillator  2300/- 02 4,600/-
 DC power supply: 12V @ 500 mA.
 On panel circuit-diagram.
 Various test point
 Connecting Patch Cords
13. Multivibrators using IC-555 5,750/- 02 11,500/-
 DC power supply: 12V @ 500 mA.
 On panel three circuits for Monostable,
Astable and BistableMultivibrators.
 Various test point
 Connecting Patch Cords
14. Function Generator 27,900/- 03 83,700/-
 1Hz-10 MHz frequency
 Sine, Square, Triangular, Ramp, pulse, TTL
and Serial data output
 20 Vpp output and DC offset.
 40 MHz frequency counter
 50Ω impedence
 20/40/60 dB attenuation
 Rise and Fall time ≤ 50 nsec
 RS232 interface
15. Regulated Variable Dual Power Supply 10,900/- 04 43,600/-
 Three floating, independent DC supply
voltages
 DC outputs 0 - 30 V, 0 ± 15 V (dual tracking)
and 5 V, 1 A each
 Constant Voltage and Constant Current
operation
 Digital display for voltage and current
 Adjustable current limiter
16. Digital Multimeter 2000/- 03 6000/-
 DC Voltage: 200mV/2V/20V/200V/600V
o Accuracy: ±(0.5% +3)
 AC Voltage: 200V/600V
o Accuracy: ±(1.2% +10)
 DC Current: 20µA/200 µA
/2mA/20mA/200mA. ±(1.0% +3)
  AC Current: 200 mA /2mA /
20mA/200mA/10A ±(1.0% +3)
 Resistance: 200Ω/2k Ω/20k Ω/200k Ω/2M Ω
 Temperature: -20 to 1000oC.
TOTAL 8,12,350INR+
1,46,223/-
GST
Rs.
According to the recommendation of the committee, after open tender, the rates quoted by
M/s Technical Systems238, Zone-II, M.P. Nagar, Bhopal are the lowest. Hence, it is
recommended that the order may be placed with M M/s Technical Systems238, Zone-II, M.P.
Nagar, Bhopal. Moreover, permission may kindly be granted to sanction Rs. 83780.00 (Rs.
Eighty Three Thousand Seven Hundred Eighty Only) from R & D project, sanctioned
vide letter No. 4829/CST/R&D/Phy & Engg Sc/2014 dated 09.12.2014.

(Dr. Sarita S. Bhadauria) (Dr. Laxmi Shrivastava)

Principal investigator of the project, Co-investigator of the project,
Dept. of Electronics Dept. of Electronics

Submitted for approval to:

Dr R.K. Pandit
DIRECTOR

MADHAV INSTITUTE OF TECHNOLOGY & SCIENCE, GWALIOR - 5

Supply Order

Ref No: ELEX/SSB/ Date: / /2019

To,
M/s U-n-US Computers,
“Vyas Bhawan”, Naya Bazar,
Lashkar, Gwalior-9

Subject: Supply order for basic electronics lab items

Ref: Your offer dated 23/04/2015

Dear M/s,
Please supply and install the following items as per the details mentioned below within 2
days from the date of order:
S No Item with specification Rate Qty Amount
1. Electronics Workstation 2,90,000/- 02 5,80,000/-
Structural specification of Workstation should be
as follows:
 The basic structure should be made of
 38x38x1.5mm CRC powder coated pipes for
sturdiness.
 The overall dimension of workstation should
not be less than W = 1220mm, D= 770mm,
H=100 mm and thickness 1.2 mm with handle
& separate lock on each drawer should be
provided.
 MS Drawers 03 numbers W = 275 mm, D375
mm, H=1360mm.
 For the panel section, raised back height of
1200 mm from floor with matching height
support from the side at a depth 500 mm for
instrument housing with a MS panelstrip
below it for housing electrical sockets and
switches for external use.
 Two pole MCB (32A-Havell/Siemens) to be
provided for safety of workstation.
 Workbench should work on Mains supply:
230V AC, 50Hz.

Technical features of instruments and facility to

be installed on the Workbench should be as under:
 70MHz 4 analog Channel Digital Storage
Oscilloscope
 25MHz Arbitrary Function Generator
 Triple Channel Power Supply
 Digital Multimeter
 Temperature controlled Soldering and De
soldering station with SMD Iron.
 Single unit PC loaded with interactive
teaching, and learning material and Electronic
circuit design and simulation software.
v) Single user teaching, learning material
with animations and user interactive
simulations
vi)Electronic Circuits Simulation Software

2. Voltage Stabilizer 22,000/- 01 22,000/-

 Rating:5 KVA Servo Stabilizer: 2 KVA to 50
KVA (Single Phase)
 Input Voltage Range: (a) 180V -280V (b)
160V-280V (c) 140V - 280V
 Nominal Output Voltage: 230V
 Output Voltage Accuracy: ±1%
 Line Frequency Variation: 47-53 Hz
 Control: Digital/Analog
 Response Time: 10 mS
 Voltage Correction Rate, (a) Air Cooled (b)
 Oil Cooled: 25V / Sec.15V/ Sec
 LCD Display (20 x 2 matrix): Date & Time,
Input Voltage, Output Voltage & Current
 Programmable Features (Through 2-parallel
way resettable passwords): HV cut-off set.LV
cut-off set .O/L trip set. Time delay set
Operating mode (auto/manual)
 Efficiency: 97%
 Protection: Automatic Switch-Off against:·
Under / Over-Voltage· Over-Load & Short –
Circuit· Single Phasing
 Surge Protection: Class C Type Secondary
surge Protection
3. SCHMITT Trigger 2,875/- 02 5,750/-
 In built DC power supply: 12V @ 500 mA.
 On panel circuit-diagram.
 Various test point
 Connecting Patch Cords
4. RC-Coupled Amplifier 2,875/- 02 5,750/-
 In built DC power supply: 12V @ 500 mA.
 On panel circuit-diagram.
 Various test point
 Connecting Patch Cord
5. Class C Tuned Amplifier Experiment Board 2,875/- 02 5,750/-
 In built DC power supply: 12V @ 500 mA.
 On panel circuit-diagram.
 Various test point
 Connecting Patch Cords
 Online Product Tutorial
6. Transistor 5,750/- 02 11,500/-
Characteristics (CB,CE,CC)
Trainer
 Digital Voltmeter and Ammeter
Ammeter : 1 μA to 200 mA
Voltmeter : 1 mV to 200 V
 Fixed DC power supply : +12,-12,+5,-5 V DC
 Transister : BC548,2N3906
 Potentiometer : 02 No's
 Various test point
 Connecting Patch Cords

7. Understanding 5,750/- 02 11,500/-

Characteristics of
MOSFET, FET
 Inbuilt fixed and variable power supply
 Toggle switch for selection of variable power
supply
 Inbuilt Ammeter and Voltmeter
 Bread board
  Resistance bank
 10 turn potentiometer

8. Hartely and 3,450/- 02 6,900/-

Colpitt Oscillator trainer
 Biasing Voltage : +12 V DC
 Design of Oscillators : Passive Elements with
 NPN Transistors
 Various test point
 Connecting Patch Cords
9. Wien Bridge 2300/- 02 4,600/-
Oscillator Trainer
 Power supply : ±12 V DC
 Potentiometer : 470 K, 1W
 Passive elements and Op-amp as amplifier
 Various test point
 Connecting Patch Cords
10. Phase Shift 2300/- 02 4,600/-
Oscillator
 DC power supply: 12V @ 500 mA.
 On panel circuit-diagram.
 Various test point
 Connecting Patch Cords
11. Clapp Oscillator 2300/- 02 4,600/-
 DC power supply: 12V @ 500 mA.
 On panel circuit-diagram.
 Various test point
 Connecting Patch Cords
12. Crystal Oscillator  2300/- 02 4,600/-
 DC power supply: 12V @ 500 mA.
 On panel circuit-diagram.
 Various test point
 Connecting Patch Cords
13. Multivibrators using IC-555 5,750/- 02 11,500/-
 DC power supply: 12V @ 500 mA.
 On panel three circuits for Monostable,
Astable and BistableMultivibrators.
 Various test point
 Connecting Patch Cords
14. Function Generator 27,900/- 03 83,700/-
 1Hz-10 MHz frequency
 Sine, Square, Triangular, Ramp, pulse, TTL
and Serial data output
 20 Vpp output and DC offset.
 40 MHz frequency counter
 50Ω impedence
 20/40/60 dB attenuation
 Rise and Fall time ≤ 50 nsec
 RS232 interface
 15. Regulated Variable Dual Power Supply 10,900/- 04 43,600/-
 Three floating, independent DC supply
voltages
 DC outputs 0 - 30 V, 0 ± 15 V (dual tracking)
and 5 V, 1 A each
 Constant Voltage and Constant Current
operation
 Digital display for voltage and current
 Adjustable current limiter
16. Digital Multimeter 2000/- 03 6000/-
 DC Voltage: 200mV/2V/20V/200V/600V
o Accuracy: ±(0.5% +3)
 AC Voltage: 200V/600V
o Accuracy: ±(1.2% +10)
 DC Current: 20µA/200 µA
/2mA/20mA/200mA. ±(1.0% +3)
 AC Current: 200 mA /2mA /
20mA/200mA/10A ±(1.0% +3)
 Resistance: 200Ω/2k Ω/20k Ω/200k Ω/2M Ω
 Temperature: -20 to 1000oC.
TOTAL 8,12,350INR+
1,46,223/-
GST
Rs.
Bills are to be submitted in duplicate after supply.

Dr.R.K Pandit
Director

Terms & Conditions:

1. Delivery FOR the Institute.
2. All taxes are inclusive