Dp2500self PDF

Matsushita Graphic Communication Systems Inc.
Corporate Overseas Sales Division

1
DP-2500/2000 New Product Seminar Agenda
• 1st day
<AM>
– Out line of DP-2500/2000
– Installation & Adjustment (Main unit & Options) -- S/M Chapter 8, 9, 10
– DP-2500/2000 Options instruction
<PM>
– General Operation
– Mechanical Description (Main unit, Scanner unit)
– Explanation of PM Parts
• 2nd day
<AM>
– Disassemble
• PCBs, Clutch, Power Unit, LSU, Scanner unit, ADF unit, Finisher
– Mechanical Explanation
<PM>
– User Parameter
– Service Mode -- S/M Chapter 5
Matsushita Graphic Communication 2
Systems Inc.
DP-2500/2000 New Product Seminar Agenda
• 3rd day
<AM>
– Trouble shooting / Check & Call Function
– System Description (Block Diagram) --S/M Chapter 6
<PM>
– Firmware Update
– System Description (Block Diagram) --S/M Chapter 6
• 4th day ( Target for both Sales and Service )
<AM>
– Development Concept
– General Specification (COPY / FAX unit, Printer & Scanner)
– DP-2500/2000 Options
<PM>
– Panasonic Document Management System (PDMS)
– Scanner / Printer Driver, Status Monitor, Document Manager, Phonebook
– Summary
– Q&A

Systems Inc.
• Strong Multi Function Product (MFP)
which improve the printer function
(Improved from Fax function)
• Network Capability
(Network Printer & Internet Fax Function)
• Easy Firmware Maintenance
(Using Flash ROM card )

Systems Inc.
• Max.550 sheet x 4 + Sheet Bypass
• Face-up set and Face-down Print
• Touch Panel LCD (DP-2500)
• Fastest 1st print 4.5 sec. in this class
• Smallest Foot Print in this class
• Selectable advanced options
• Easy maintenance for customer
• Unify supplies (PPC/Printer/Fax)
Systems Inc.
• Easy Firmware Maintenance
(Using Flash ROM card )
• Check & Call at PM timing or problem
occurred
• D350 series and UF-885 series service
mode structure are Succeeded

Systems Inc.
Systems Inc.
General Description
1. Specification
2. Option
3. Consume Item
1. Specification DP-2500 DP-2000
Type Desktop Type (Scanner Printer)
Printing Method Laser + Erectric Photo Method
Continuos Copy Speed 25 sheets/minutes (A4/LTR) 20 sheets/minutes (A4/LTR)
Printing Resolution 600dpi x 600dpi
Max. Document Size A3 / Ledger
Warm Up time 35sec (Auto Off Mode), 30sec (Power Save Mode)
First Copy Time Less than 4.5sec (8.5 x 11 / Manual exposure)
Copy Ratios 25 - 400% (enlargement/reduce)
Paper Feed 2 Paper Tray + Multi Sheet bypass 1 Paper Tray + Multi Sheet bypass
Paper Size Paper Tray
LDR, LGL, LTR, LTR-R, INV_R, A3, B4, A4, A4R, A5, A5R
Sheet bypass
LDR, LGL, LTR, LTR-R, INV_R, A3, B4, A4, A4R, A5, A5R
Paper Capacity (80g/m2) Tray : 550sheets x 2 (STD) Tray : 550sheets x 1(STD)
Option : 550sheets x 2 (additional) Option : 550sheets x 3 (additional)
Sheet bypass: 50 sheets(A4/LT)
Print Void 4mm (Top, Left, Right, Bottom)
Systems Inc.
Specification
DP-2500 DP-2000
ADF 50 Sheets (55 - 105g/m2)
iADF 30 Sheet (B4, A3, LGR, LGL)
OPTION
2 Sided Printing (ADU) Inc : 16MB D-RAM

FAX G3 FAX Unit
Electric Sorting Standard Option
Inner1, 2 : 250 sheets (Face down)
Output Tray Capacity
Finisher : 1000 sheets
Continuous Copy Count 999 Sheets
Power Source AC 120 V +/- 10 % / 220 ~ 240 V +/-10 %
Power Consumption Less than 1.5 kw
Ambient Condition Temperature : 10-30C(50-80F)
Relative Humidity : 30-80 % (Non condensing)
Noise Level
Operation : 53dbA Standby : 40dbA
Dimmensions(W x D x H) 597x600x701mm (Bottom to Glass) 597x600x576mm
Weight Approx. 55kg (121.3lb) (Main Unit) TBA
Toner Cartridge is not included in Main Unit.

Systems Inc.
Specification
DP-2500 DP-2000
Main Unit life (Copy, Print) 1200K sheets 600K sheets
Main Unit life (Year) 5 years 5 years
Average C/V sheets 5K - 10K / Month 3K - 6K / Month
Max C/V sheets 30K sheets / Month 15K sheets / Month
PM cycle Major : 120,000 sheets
MCBJ 1 jam /20,000 sheets (plain paper), At Full option

Systems Inc.
DP-2000 / 2500 Option
Feature Required Options Order No
Sort Copy ( for DP-2000) Electronic Sorting Board DA-ES200
Fax Communication Kit DA-FG230
G3 FAX
Electric Sorting Bord Kit <DP-2000 only> DA-ES200
2nd G3 FAX
2nd G3 Fax Communication Port Kit DA-FG231
Parallel Port Interface Kit DA-PC200
Parallel Port I/F(GDI)
Parallel Port Interface Kit DA-PC200
Parallel Printer(PDL)
PCL6 Emulation Kit DA-PC210
10/100 Ethernet Interface / Internet Fax Kit DA-NE200
Network Printer(GDI)
10/100 Ethernet Interface / Internet Fax Kit DA-NE200
Network Printer(PDL)
PCL6 Emulation Kit DA-PC210
Internet-FAX 10/100 Ethernet Interface / Internet Fax Kit DA-NE200

Systems Inc.
DP-2000/2500 Option
Feature Required Option Name Order No
Platen Cover Platen Cover <USA, CANADA only> DA-UC200
ADF (Single Side) Automatic Document Feeder DA-AS200
iADF (2 Sided) Inverting Automatic Document Feeder DA-AR250

Dual-Path Exit Guide Unit DA-FK200
2 Sided Printing
Paper Transport Unit DA-FK210
Automatic Duplex Unit DA-MD200
Inner 2nd Output Tray
Exit Tray (Inner) DA-XN200
Outer Stack Paper Transport Unit DA-FK210
Exit Tray (Outer) DA-XT200
DA-FK200
Dual-Path Exit Guide Unit
DA-FK210
Finishing Paper Transport Unit
DA-FS200
1-Bin Finisher
DA-FS200S
2nd Paper Feed Module <DP-2000 only> DA-DS200
Paper Feed Module 3rd Paper Feed Module DA-DS210
4th Paper Feed Module DA-DS200
Systems Inc.
DP-2000/2500 Option
Feature Required Option Order No
Stand for 1-Paper Tray configuration ( For DP-2000 only ) DA-DA200
Stand
Stand for 2-Paper Tray configuration DA-DA210
(except North America,
Europe)
Image Memory (8MB) DA-SM08B
Additional Sort Memory Image Memory (16MB) DA-SM16B
Image Memory (128MB) DA-SM28B
Image Memory Expansion Flash Memory Card, 4MB UE-410047
expantion for Fax Expansion Flash Memory Card, 8MB UE-410048
UE-403171
<For N.America>
Handset Kit
UE-403172
Handset
<For others>
Handset Mounting Kit
UE-408004-AU
(When 1-Bin Finisher (DA-FS200) is installed.)
Toner Refill Toner Refill Kit (Service Hint SH00006, at 18k copies.) DQ-RK18B
Key Counter Key Counter Cable Kit DA-KH200
Dehumidifier Heater kit (for Scanner & LSU) is available as Service Part.
Order No. : Please refer to the Service Manual Options and Supplies

Systems Inc.
Printer Specification (Option)
Resolution 600dpi / 300dpi
OS Windows95/98, Windows NT4.0, Win2000
Interface IEEE1284(ECP) : Bi direction Parallel
Page Description Language PDL: PCL6, Windows GDI
Network Printer (Ethernet I/F + PDL)
Continuos Printing Speed 25 sheets / min
Paper Size LDR,LGL,LTR,LTR-R,INV-R,A3,B4,A4,A4R,A5,A5-R
Memory Capacity Standard 18MB (serves as Copy Memory)
Additional Option Memory : None
Printer Driver Zoom (50 - 200%), N in１（2in1/4in1)
Network Card 10/100 Ethernet Interface
Fonts Include PDL PCB
Scanner Specification (Option)

Scanning Device CCD (Monochrome)
Scannig Size A3/LDR (Max)
Resolution 600dpi/300dpi
Scanning Speed Approx. 2sec
OS Windows 95/98, WindowsNT 4.0, Win2000
Interface IEEE1284(ECP) : Bi direction Parallel
Driver TWAIN
Photo (Halftone) 256 levels
Systems Inc.
DP-2000/2500 Consumable
Consumable Name
Item Supply Name Comments Order No
Staple Cartridge for DA-FS200
Staple DQ-SS200
(Order : BOX = 3000/pcs x 3)
Toner Cartridge installable by user
Toner Cartridge
Toner Cartridge (Waste Toner Bottle Inc.) DQ-TU18B
(Order : BOX = 6pcs)
18K (A4/Letter. 6% Black)
OPC Drum
OPC Drum 30K DQ-H030B
(Order : BOX = 12pcs)

Systems Inc.
Maintenance Kit
1. Applicable Model : DP-2000/2500
2. Contents : DZSM000383 / FBH4810-00
DQ-M25B12-PU DQ-M25B24-PU
Description Part number 120K 240K
Roller,Mag DZLA000196 1 1
Roller,Gap DZLM000100 2 2
Blade,Dr DZJA000650 1 1
Felt,Development DZJP000024 2 2
Sheet, Scoop DZJM000375 1 1
Roller,Baias Charge DZLA000129 1 1
Blade,cleaning DZHP004067 1 1
Felt,Front Cleaning DZJP000022 1 1
Felt,Rear Cleaning DZJP000023 1 1
Spong,Cleaning DZJM000373 2 2
Roller,Timing DZLA000199 1 1
Cleaner,Roller DZJP000025 1 1
Roller,Bias Transfer DZLA000200 1 1
Roller,Fuser DZLA000213 1 1
Bushing,Insulation DZLM000108 2 2
Separation DZJM000471 6 6
Roller,Pressure DZLA000214 0 1
Thermistor Assembly DZBL000032 0 1
Thermistor Assembly DZBL000033 0 1
Fan FBA08A24L0 0 1
Bearing,Heat Roller DZLM000113 0 2
Gear,E40 Heat Roller DZLF000358 0 1
Bearing,Pressure Roller DZLM000112 0 2
Roller,Exit DZLA000212 0 1
Cleaning Kit DZTP000033 1 1
Matsushita Graphic Communication

Systems Inc.
Parts List for Maintenance Kit
1. Kit No : DQ-MAR250-PU ( 120K PM Kit )

Roller Kit for ADF/I-ADF
2. Applicable Model : DA-AS200/DA-AR250
3. Contents :
Q'ty/
Description Part number Unit
Roller,Pre-Feed DZLA000204 1
Roller,ADF DZLA000205 1
Roller,Separation DZLA000206 1
Toruque limitter Assembly DZHP003955 1

Systems Inc.
Parts List for Maintenance Kit
1. Kit No : DQ-MDS210-PU ( 120K PM Kit )
Roller Kit for Paper Feed Module
2. Applicable Model : DP-2000/2500 / DA-DS200 / DA-DS210
3. Contents :
Q'ty/
Description Part number Unit
Roller,Paper Feed DZLA000203 10
Roller,C25/C26 Gear DZLA000202 20
Clutch,Assy (Spring + Boss) DZHP004386 10

Systems Inc.
Refer
Referto
toInstallation
Installationmanual
manual
1. Main Unit
2. Optional Unit

Systems Inc.
Main Unit Installation(refer to Service Manual )
1.Optics
(1) Remove the Left Platen Cover. (3 screw)
(2) Remove the fixed metal (blue screw)
(3) Re-install Book Cover L (3 screw)
Put back the blue screw to original position
1
Fixed metal is put in the Paper Tray
2. Paper Tray
5
Pull out the Paper Tray and remove all packing material
3. Fuser Unit 3
(1) Open Right Cover 6
(2) Tighten the 2 screw in the holes of Jam Cover
of the Fuser Unit
4. Process cartridge 4
2
(1) Open Right Cover then Front Door
(2) Insert the Process Unit along the Cassette Guide
(3) Insert the Toner Cartridge then set the Waste Toner Bottle
(4) Close Front Door then Right Cover
5. Control Panel
Pull out the insulation film from the Battery Holder
6. Power SW ON
Plug the Power Code and turn the Power Switch ON
Set the Paper Size by Service Mode F5-14,15 20
Image density adjustment Image position adjustment
1.Check the image using F2 (Single copy) 1.Copy using Test Chart 54
Exposure:Manual center, Text/Photo mode 2.F6-07:Lead edge void
F6-18, 19 should be “0” (+):More void (-):Less void
2.Using gray scale chart (FQ-SJ101), 3.F6-08：Trail edge void
1:Invisible 2:Slightly visible (+):Less void (-):More void
3.Adjust Gamma curve by F6-50 Adjust followings if necessary
(Text/Photo Mode) F6-03:Registration Timing (1st Feeder)
Press RESET key to input +/- switches F6-05:Registration Timing (2,3,4th）
(Registration clutch timing adjustment)
(ADF Leading edge adjustment is F6-91)
F6-83:Laser Unit side to side (Sheet Bypass)
FQ-SJ101
F6-84:Laser Unit side to side(1st feeder)
F6-85:Laser Unit side to side(2nd feeder)
A
F6-86:Laser Unit side to side(3rd feeder)
1 Invisible F6-87:Laser Unit side to side(4th feeder)
F6-89:Laser Unit side to side(ADU)
2 Slightly visible

Systems Inc.
Configuration
Configuration of
of Stand
Stand
Combination (pattern 1) (pattern 2) (pattern 3) (pattern 4)

Pattern
DP-2000 DP-2000 Dual Feeder Triple 4 Feeder
STD DP-2500 STD Feeder
Hight = 1005mm
Up to Platen,
excluding
platen cover
H
Door
Stand Door

Systems Inc.
Refer to option installation instruction
Fax feature options Copier feature options
•Fax Comm. Kit (1st channel) •Platen Cover
•2nd G3 Fax Comm. Kit •ADF (1 side)
•Internet Fax Kit •Inverting ADF (2 sided)
•Handset Kit •2nd Paper Feed Module
•3rd Paper Feed Module
Printer feature options •4th Paper Feed Module
•Parallel Port Interface Kit •Dual Path Exit Guide Unit *
•PCL6 Emulation Kit •Paper Transport Unit *
•Automatic Duplex Unit *
•Exit Tray(Inner)
Electric Sorting Board •Exit Tray(Outer)
Electric Sort Memory •1 Bin Finisher
(8/16/128MB） •Key Counter Cable Kit
*(64MB for Europe only)
Systems Inc.
Copier
Copier Feature
Feature Option
Option Structure
Structure
sADF(Single Side)
DA-AS200
1 Bin Finisher iADF(2 Sided)
DA-FS200 DA-AR250
(Max 1000 pages stack)
Exit Tray(outer) Electric Sort Memory

DA-XT200 DA-SM08B/16B/28B
(8/16/128MB)
Exit Tray(inner) Electric Sorting Board

DA-XN200 DA-ES200
Paper Transport Unit Automatic Duplex Unit

/Dual Path Exit Guide Unit DA-MD200
DA-FK210/FK200
(Need the above unit when

use the Finisher/Exit Tray 2nd, 3rd, 4th Paper Feed Module
/Automatic Duplex Unit) DA-DS210/DS200
Paper Capacity : 550 page

Systems Inc.
DP-2500 Option Configuration
STD except Selection
USA&Canada:
2nd G3 Fax
Communication Port Kit
i-ADF ADF Platen Cover
Dual Port
G3 Fax
Fax Fax
Flash
Memory
Communication Kit
4MB
Dual-Path 8 MB
Exit Guide Unit
Outer Tray Internet-fax
Network Printer 10/100 Ethernet I/F &

Inner Tray
Internet Fax kit
PCL5e/6
Paper Transport Unit
1-bin Finisher Emulation Kit
Local Printer Parallel Port

Interface kit
Electric Sorting
function included
Automatic
Duplex Unit Image Memory
8MB
16MB
128MB
Exit Tray
(Inner)
Handset Kit
Dual-Path
Exit Guide Unit
Automatic 25
Duplex Unit
DP-2000 Option Configuration
STD except Selection
USA&Canada:
2nd G3 Fax
Communication Port Kit
i-ADF ADF Platen Cover
Dual Port
G3 Fax
Flash
Fax Fax Memory
Communication Kit 4MB
Dual-Path 8 MB
Exit Guide Unit Internet -fax
Outer Tray
10/100 Ethernet I/F &

Electric
Internet Fax kit
Inner Tray Sorting
Board
Network Printer
PCL5e/6
1-bin Finisher Emulation Kit
Local Printer
Parallel Port Printer
Interface kit
Automatic
Duplex Unit Image Memory
8MB
16MB
128MB
Handset Kit
Exit Tray
Dual-Path
(Inner)
Exit Guide Unit
Automatic
Duplex Unit 26
DP-2500 Installing Procedure
Stand for Stand for Stand for
PDL
4-Paper 3-Paper 2-Paper
unit
tray config tray config tray config
4th paper
feed module
Scanner
3rd paper i-ADF ADF printer
Platen
feed module (2 sided) (1side) I/F unit
cover
Main Unit FAX communication kit

Exit tray
DP2500 D-RAM
(inner)
OR board
Internet 2nd 8 ＭＢ
Automatic Fax G3 Com
Paper transport F-ROM D-RAM
duplex unit unit
unit card board
unit
4MB 16ＭＢ
OR
F-ROM D-RAM
1 bin Exit tray Dual-Path Handset card board
Finisher (outer) exit guide unit 8MB 128 ＭＢ

Systems Inc.
DP-2000 Installing Procedure
Stand for Stand for Stand for
4-Paper 3-Paper 2-Paper PDL
tray config tray config tray config unit
4th paper 3rd paper Electronic sorting board

feed module feed module
Scanner
2nd paper i-ADF ADF
printer
feed module (2 sided) (1 side)
I/F unit
Stand for
Main Unit Platen FAX communication kit
1-Paper
DP2000 Exit tray cover D-RAM
tray config
(inner) board
OR
Internet 2nd G3 8 ＭＢ
Paper transport Automatic Fax Comm.
F-ROM D-RAM
unit duplex unit unit
card board
unit 4MB 16ＭＢ
OR
F-ROM D-RAM
1 bin Exit tray Handset
Dual-Path card board
Finisher (outer)
exit guide unit 8MB 128 ＭＢ
Systems Inc.
ENERGY SAVER INTERRUPT FUNCTION RESET
Panasonic
DP-2500
COPY ORIGINAL COPY REDIAL /
MULTI-SIZE PAUSE
SORT SIZE SIZE CLEAR
FEED
TONER
FAX
LEDGER FLASH /
SUB-ADDR
1 2 3
ON LINE Message
MessageDisplay
Display LEGAL
ABBR 4 5 6
STOP
LCD
INTERNET (Touch
(TouchPanel)
Panel)
CONTRAST LETTER
MONITOR 7 8 9
START
PRINTER
ON LINE LETTER
SET * 0 #
DATA TONE
INVOICE ALARM ACTIVE
2SIDED 1SIDED SHIFT

COPY
2
COPY
1
SORT
STAPLE
SORT
SHIFT
Panasonic ENERGY SAVER INTERRUPT FUNCTION RESET
GROUP DP-2000
MEMORY COPY ORIGINAL COPY REDIAL /
IN
COPIED BLANK
M1 M2
20 x 2 LCD SIZE SIZE PAUSE CLEAR
2 PAGE
2 in 1 COPY BOOK EDGE MARGIN
FAX
PHOTO
TEXT/
LEDGER FLASH/
SUB-ADDR
1 2 3
PHOTO
One Touch ON LINE

TEXT
DIRECTORY LEGAL 4 5 6
STOP
ABBR
Area INTERNET OUTPUT SEARCH
7 8 9
TRAY
LETTER
MONITOR
FAX OPT Only PRINTER ON LINE
PAPER
LIGHTER DARKER
START
TRAY LETTER
SET * 0 #
DATA
RESOLUTION LINESELECT TONE
ZOOM / VOL INVOICE ALARM / ACTIVE
29
ENERGY SAVER INTERRUPT FUNCTION RESET
Panasonic
DP-2500
COPY ORIGINAL COPY REDIAL /
MULTI-SIZE PAUSE
SORT SIZE SIZE CLEAR
FEED
TONER Ａ３
FAX
FLASH /
SUB-ADDR
1 2 3
FLS
ON LINE Message
MessageDisplay
Display B4
ABBR 4 5 6
STOP
LCD
INTERNET (Touch
(TouchPanel)
Panel) Ａ４
CONTRAST
MONITOR 7 8 9
START
PRINTER A4
ON LINE
SET * 0 #
DATA TONE
Ａ５
ALARM ACTIVE
2SIDED 1SIDED SHIFT

MULTI-SIZE TIFEED
COPY
2
COPY
1
SORT
STAPLE
SORT
SHIFT
Panasonic ENERGY SAVER INTERRUPT FUNCTION RESET
GROUP DP-2000
MEMORY COPY ORIGINAL COPY REDIAL /
IN
COPIED BLANK
M1 M2
20 x 2 LCD SIZE SIZE PAUSE CLEAR
2 PAGE A3
2 in 1 COPY BOOK EDGE MARGIN
FAX
PHOTO
TEXT/ FLASH/
SUB-ADDR
1 2 3
PHOTO
One Touch ON LINE

TEXT
DIRECTORY
FLS
B4 4 5 6
STOP
ABBR
Area INTERNET OUTPUT SEARCH
A4
7 8 9
TRAY
MONITOR
FAX OPT Only PRINTER ON LINE
PAPER
LIGHTER DARKER
START
A4
TRAY
SET * 0 #
DATA
RESOLUTION LINESELECT TONE
ZOOM / VOL A5 ALARM / ACTIVE
30
The table below shows the options which are
required for various functions.

Systems Inc.
Refer
Referto
toInstallation
Installationmanual
manual
1. Main Unit
2. Optional Unit

Systems Inc.
Duplex Unit
Inner Tray
Dual Path Exit Guide Unit
Outer Tray or
Finisher

Systems Inc.
ADF
Image Scanner
Exit Roller
Separation finger Pressure Roller
Thermistor Pressure Spring

Heat Roller
Waste Toner
Collection
Bias Charge Roller OPC
LSU Doctor Blade
Drum Bias Transfer Roller
Toner Cartridge Timing Roller

Mag Roller
Paper Feed Feed Roller
Pickup Roller
Paper
Matsushita
Detection
Graphic
Sensor
Communication
Separation Roller 34
Systems Inc.
ADF
Image Scanner
Heat Roller Pressure Roller
OPC
LSU Drum
Toner Cartridge
Timing Roller

Pickup Roller
Paper Detection
Matsushita Sensor
Graphic Separation Roller
Communication 35
Systems Inc.
ADF
Image Scanner
Pressure Roller
Heat Roller
OPC
LSU Drum
Toner Cartridge
Timing Roller

Pickup Roller
Paper Detection
Matsushita Sensor
Graphic Communication
Systems Inc.
ADF
Image Scanner
Pressure Roller
Heat Roller
OPC
LSU Drum
Toner Cartridge
Timing Roller

Pickup Roller
Paper Detection
Matsushita Sensor
Systems Inc.
ADF
Image Scanner Exit Roller
Pressure Roller
Heat Roller
OPC
LSU Drum
Toner Cartridge
Timing Roller

Pickup Roller
Paper Detection
Matsushita Sensor
Systems Inc.
Configuration
Configuration
Pre-Feed Roller
ADF ADF Roller
Separation Roller
Feed 1 Roller
Feed 2 Roller
Exit Roller
Read Point
iADF
Reverse Roller
Duplex 2 Guide

Systems Inc.
iADF
Pre-Feed Roller
ADF Roller
Separation Roller
Feed 1 Roller
Reverse Roller
Inverting 1 Guide
Duplex 2 Guide
Feed 2 Roller
Exit Roller
Read Point Image Scanner

Systems Inc.
PM Cycle : 120K
ADF ADF Roller 120K Fuser Unit Fuser Roller 120K

Pre-feed Roller 120K Pressure Roller 240K
Separatin Roller 120K Insulation Bushing 120K
Torque Limiter Assy 120K Separation 120K

Bearing(1046) 240K
E40 Heat Roller Gear 240K
Bearing(1039) 240K
Scanner UNIT Xenon Lamp 240K
Exit Roller 240K
This part is not included in Maintenance list
Thermister Assy 1,2 240K
MAIN UNIT FAN 240K Transfer

Bias Transfer roller 120K
Unit
Process Unit OPC Drum 30K OPC
Bias Charge Roller 120K Drum Paper Feed Paper Feed Roller 120K
Cleaning Blade 120K Unit C25 Gear Roller 120K
Cleaning Felt F/R 120K C25 Gear Roller 120K
Cleaning Sponge 120K Reverse Clutch 120K
Timing Roller 120K
Sheet, Scoop 120K
Roller cleaner 120K
Development Mag. Roller 120K
Gap Roller 120K
Doctor blade 120K
Development Felt 120K
Systems Inc.
Refer to the Service manual
Disassemble section and replace the PM parts
１．Paper Feed 4．Optics Unit
Open right cover Remove the Platen Glass
・Bypass Paper Feed Roller ・Replace Xenon Lamp
Slide out the Paper Cassette ・Clean the Mirror Lens
・Pick Up Roller ・Remove the Panel Unit
・C25 Gear Roller 5．Main Unit
・Paper Feed Roller ・Bias Transfer Roller
2．Process section ・LSU Laser unit
Open right cover, the front cover ・PCB
・Toner Cartridge 6．ADF
・Drum Cartridge Open ADF rear cover
OPC Drum/Bias Roller/Cleaning blade ・ADF Roller
3．Fuser Unit ・Pre-Feed Roller
Remove the right cover, then Fuser unit ・Separation Roller
・Fuser lamp(2 lamps) ・（Verification stamp）
・Pressure Roller 7．Finisher
・Heat Roller ・Paper Ejection Motor
・Replace Thermister ・DC Controller Circuit Board
・Staple Unit
Systems Inc.
<Process Block >
Photoreceptor: OPC
Primary Charge: Bias Charge Roller Waste Toner Collection
Toner: Mono Component Magnetic Toner
Transfer: Bias Transfer Roller Bias Charge Roller OPC
Separation: Separation Needle Doctor Blade
Drum
Cleaning Blade: Urethane Rubber Bias Transfer Roller

Process speed: 176mm/s
Mag Roller
Solid Black: More than 1.1(O.D.=1.0)
Main motor：DC brush-less motor Toner Cartridge
Ozone Filter is not exist due to

direct contact charge
Systems Inc.
Primary Charge Cleaner section
- Bias Charge Roller (BCR) type Blade cleaning method
- Charge voltage : -560VDC＋AC Toner recycle section Fuser section
- Diameter of BCR : 14φ Heat roller method
Roller diameter 40φ
Bias Charge Roller
OPC
Drum section drum
- Layer built negative charged ＯＰＣ Dr blade
Diameter : 30φ Bias transfer
V0 : -560V Mag-roller roller
Toner sensor
Developing section Toner cartridge
- Mono component magnetic toner Transfer/Separation
- Developing bias : DC-430V section
AC 1.65KVp-p(1.7KHZ) - Conductive roller transfer
- Toner : Negatively charged magnetic toner Urethane sponge
Diameter : 9.4μm Diameter : 20φ
- Amount of toner : 1,200g (18K/A4. 6% black ratio) - Transfer voltage : 1,600V
- Residual toner detection : Hall element（Permeability） Steady current : 12μA
Residual toner amount in developing section : Approx. 80g - Separation by Electrostatic
Diameter of Mag-roller : 20φ removal needle
- Doctor blade : Urethane rubber
- Waste toner : Toner waste bottle 44
Refer
Refer to
to Service
Service manual
manual
1. User Parameters
2. Service Mode

Systems Inc.
Function modes allow you to change the initial copy modes, if necessary.
Screen
Modes Function Initial setting
No.
00 SORT MODE DEFAULT Selects finisher mode. Non-sort
CNon-sort, Sort, Staple, Shift-group,
Shift-sort
02POWER ON DEFAULT * Selects mode. Copy
01/02 Copy, Fax
05SORT MEMORY USAGE Displays the amount of sort memory OFF
used on
the panel.
OFF, ON
06DEPT. COUNTER Copy usage and copy limit of Consult
selected your
department and total copy usage will service
appear technician.
on the screen.
02/02
07PAGE NUMBERING Selects numbering style -n-
-n- or n/m (ex: -1- or 1/10)
09SET KEY OPER CODE Input key operator ID code.
Go to General Functions for Key
Operator after input ID code

Systems Inc.
Screen
Modes Function Initial setting
No.
00 PAPER SIZE Sets the paper size of each paper drawer.* Consult
A3, B4, A4, A4-R, B5, B5-R, A5, FLS1, your
FLS2, Ledger, Legal, Letter, Letter-R, service
Invoice technician.
01 AUTO RESET TIME Selects the reset time. 1 minute
None, 30 seconds, 1minute, 2minutes,
3minutes, 4minutes
01/05 02 ENERGY SAVER MODE Sets the Energy Saver mode and time. Sleep mode
None, Energy save mode, Sleep mode
Energy save mode timer: 1-120 minutes
Sleep mode timer : 1-120 minutes
03 ENERGY SAVER TIME Sets the on time and off time for Energy
Saver mode. Start time - End time
04 LANGUAGE DEFAULT Selects the message language of the display. English
English, French, Spanish
05 SPECIAL TRAY 1 Set the paper drawer for special paper None
(ex:colored). None, Cassette1, Cassette2,
Cassette3, Cassette4, Sheet bypass
06 SPECIAL TRAY 2 Sets the paper drawer for special paper None
02/05
(ex:colored).None, Cassette1, Cassette2,
Cassette3, Cassette4, Sheet bypass
09 KEY/TOUCH BEEP Sets the panel touch sound. Soft
Off, Soft, Loud
Systems Inc.
10 ORIG. SET BEEP Beep sound when original is set on the platen OFF
OFF, ON
11 ORIG. SET BEEP ADF Beep sound when original is set in the ADF On
OFF, ON
03/05
14 DEPT. COUNTER MODEMonitors copy usage of each department Consult
(1)Copy usage of each department your
(2)Copy limit of each department service
(3)Copy number of each department technician.
04/05 None
20DATE & TIME Sets date time registered
21DAYLIGHT TIME Sets daylight saving time On
OFF, ON
22TCP/IP ADDRESS * Sets user IP address
05/05 3 digit x 4
23TCP/IP SUBNET MSK * Sets the subnet mask
3 digit x 4
24TCP/IP G/W ADDR. * Sets the gateway address
3 digit x 4

Systems Inc.
Screen No. Modes Function Initial setting
00 MARGIN VALUE DEF. Selects the margin shift value. 10mm
5 mm, 10 mm, 15 mm or 20 mm
01 EDGE VALUE DEF. Selects the edge width. 5mm
5 mm, 10 mm, 15 mm or 20 mm
02 BOOK VALUE DEF. Selects the book void width. 20mm
01/02
15 mm, 20 mm, 25 mm or 30 mm
03 MARGIN REDUCTION Selects the reduction ratio in margin mode. OFF
OFF, ON
04 DUPLEX MODE DEF. Determines most frequent usage mode No
No, 1 to 2, 2 to 2 or Book to 2
05 REDUCE Nin1 SPACE Selects whether or not to disable edge OFF
deletion
OFF, ON
06 DIGITAL SKYSHOT Enables or disables the use of sky shot Normal
mode.
None, Normal, Quality
02/02
07 MANUAL SKYSHOT Enables or disables the use of Manual Sky OFF
Shot.
08 AUTO EXPOSURE Automatically adjusts the copy density ON
for text and photographic originals.
OFF, ON
09 SET KEY OPER CODE Input key operator ID code.
Systems Inc.
Screen No. Modes Function Initial setting
00 PAPER SIZE PRIO. Specifies the paper size in manual paper Letter
size setting mode.
01 ORIGINAL DEFAULT Selects original setting T/P
Text, T/P (Text/Photo), Photo
02 TEXT CONTRAST Selects contrast for Text mode 4
01/04
1-7
03 T/P CONTRAST Selects contrast for Text/Photo mode 4
1-7
04 PHOTO CONTRAST Selects contrast for Photo mode 4
1-7
06 INTERLEAVING DEF. Selects OHP interleaving paper Blank
Blank, Copy
02/04
09S ADF MODE Enables or disables the use of SADF OFF
function. OFF, ON

Systems Inc.
11 MULTISIZE ROTATE When using the same size paper in Multi- OFF
size feeding mode, select the paper
direction by rotating or not.
OFF, ON
03/04
12 M1, SIZE Input a size in memory 2 for frequent 95 x 220mm
usage size. (X) (Y)
X: 5-432/Y: 5-297 mm
13 M2, SIZE Input a size in memory 2 for frequent 95 x 220mm
usage size. (X) (Y)
X: 5-432/Y: 5-297 mm
16 MEM. O/F WARNING Selects the memory overflow warning Print
Print, Cancel
18 COPY OUTPUT TRAY * Sets the storage position for the Inner 1
04/04 copier paper.
Outer, Inner 1, Inner 2
19 OVERLAY CONTRAST Selects the transparent density for Overlay mode
Overlay mode.1- 7
* Not needed in copying mode, but needed when installing options for advanced functions.

Systems Inc.
No. Parameter Value
:01 Contrast 1. Lighter ----- 7. Darker 4. Normal
:02 Resolution 1: Standard 2: Fine 3: S-Fine
:03 Original 1: TEXT 2: TEXT/Photo 3: Photo
:04 Stamp 1: OFF 2: ON
:05 Memory 1: OFF(Direct XMT) 2: ON
:06 Dialing Method
Dialing method LINE-1 1: Pulse 2: Tone
Dialing method LINE-2 1: Pulse 2: Tone (For 2nd channel Option )
:07 Header print 1: Inside 2: Outside 3: No print
:08 Header Format 1: Logo,ID Number 2: From To
:09 RCV'D time print 1: Invalid 2: Valid
:10 Key/Buzzer volume. 1: Off 2: Soft 3: Medium 3: Loud
:12 Comm.Journal 1: OFF 2: Always 3: Inc.only
:13 Auto Journal print 1: Invalid 2: Valid
:14 File Acceptance Report 1: Invalid 2: Valid
:17 Receive Mode 1: Normal 2: Auto
:22 Substitute RCV 1: Invalid 2: Valid
:24 Print Reduction 1: Fixed 2: Auto
:25 Reduction Ratio 70% - 100% 52
Under Line : Factory setting
No. Parameter Value
:26 Polling Password Setting a 4-digit password.
:27 Polled File Save 1: Invalid 2: Valid
:28 Stamp at Mem.XMT 1: Invalid 2: Valid (Storing the Doc.into Memory)
:31 Incomplete File Save 1: Invalid 2: Valid
:33 XMT Reduction 1: Invalid 2: Valid
:36 Ring Pattern ( DRD )
Line - 1 (Option) 1: Invalid A: Single B: Double C: CTI-1 D: CTI-2
Line - 2 (Option) 1: Invalid A: Single B: Double C: CTI-1 D: CTI-2
:37 RCV. To Memory Setting a 4-digit password.
:42 Conf. Polled File Save 1: Invalid 2: Valid
:43 Password-XMT Setting a 4-digit password. + 1: OFF 2: ON
:44 Password-RCV Setting a 4-digit password. + 1: OFF 2: ON
:46 Select-RCV 1: Invalid 2: Valid
:52 Diagnostic Password Setting a 4-digit password.
:53 Sub-Address Password
:56 Cover Sheet ( Home ) 1: Off 2: On
:63 PC fax RCV. Mode 1: Invalid 2: UPDL&PRT 3: Upload
:77 Department Code 1: Invalid 2: Valid
Systems Inc.
Under Line : Factory setting
:78 Rotation XMT 1: Invalid 2: Valid

:82 Quick Memory XMT 1: Invalid 2: Valid
:85 RCV. Output Tray 1: Inner 1 2: Inner 2 3: Outer
:86 Ringer Volume 1: OFF 2: Soft 3: Middle 4: Loud
:88 Line Selection 1: Auto 2: Line-1 3: Line-2
:89 List Output Tray 1: Inner 1 2: Inner 2 3: Outer
:95 Duplex Print 1: Invalid 2: Valid
:97 Special Tray
No. 1 1:None 2:Tray1 3:Tray2 4:Tray3 5:Tray4
:99 Memory Size Displays Base Memory + OP Memory
54
1. Copier Service Mode
Original
OriginalSize
FFmode
mode Function
Functionkey
key + LEDGER/A3
Size + [3]Key
[3]Key
LEDGER/A3key key
FFmode
modereset
reset Function
Functionkey
key + Clear
ClearKey
Key
2. FAX function Service mode

Press FAX Key
Service
ServiceMode
Mode
Service
ServiceMode
Mode Function
Functionkey
key + Monitor
MonitorXX4times
4times + ** + number
number
Service
ServiceMode
Modereset
reset Stop
Stopxx22times
times
Contents of Service mode
Mode Item Function
F1 Self Test 0 CCD Test This test is used to checking the CCD.
1 LCD/LED Test This test is used to checking the LCD and LEDs.
2 Page Memory Test This test is used to checking the page memory.
3 Print Test Pattern 1 Print the pattern to set the Paper position alignment.
4 Print Test Pattern 2 Factory use only.
5 Print Test Pattern 3
Same as F8-18.
PWM Adjustment Pattern
F2 Single sheet copying One sheet is copied when the Start key is pressed. Even when no paper
is in drawer, copy operation is done. Total and Electronic counter are
disabled.
F3 Continuous copying Multi copies are made when the Start key is pressed. Stop by pressing
"Stop" key
F4 Input/Output check The function of Input/Output item (Selected item number) is checked.
F5 Function programming Various function settings (selected by code number) can be changed.
F6 Adjustment and programming Various function settings (selected by code number) can be changed.
F7 Electoric 1 A code No. for Key Operator
counter 2 Maintenance Count
3 Printer Count
4 Scanner Count
Check the counter setting.
5 Copier Count
6 PC Count
7
8 Fax Count

Systems Inc.
When replace the LSU, execute PWM adjustment by following method.
1. Printout PWM Pattern by F1-05
2. Input the number of first visible position on PWM Pattern by F6-20
At this case, input -2

Systems Inc.
F8 Service 00 CHK MIRROR MOVEMENT
Adjustment 06 ERROR LOG PRINT/VIEW
07 ERROR LOG CLEAR
12 ORG. SIZE SENSOR
19 MOVE MIRROR TO LOCK
47 ADF CONTINUOS TEST
48 PLATEN CONT. TEST
F9 System Short-cut to enter into FAX
0
Maintenance Service Modes.
1 Telephone number input
2 ROM version
3 Print out
4 RAM Edit Mode F9 Service Mode is using for System Maintenance.
5 PC Parameter
6 RAM Initialization
7 Firmware Update
8 Firmware Backup
9 PC →FLASH CARD

Systems Inc.
F4 mode input/output check
1. Input check
Message display
No. Function Condition
7 6 5 4 3 2 1 0
c00 Not used
Paper Preparation
Sensor is activated. 1
Sensor (4th cassette)
Paper Preparation
c01 Sensor is activated. 1
Sensor (3rd cassette)
Paper Preparation
Sensor (2nd cassette)
Paper Registration Sensor Sensor is activated. 1
Paper Eject Sensor Sensor is activated. 1
c02
Dual-Path Exit Guide Unit Eject
Sensor
Finisher Staple Tray2 Paper is on the tray. 1
c03
Finisher Tray Paper is on the tray. 1
Paper Transport Unit Sensor 4 Sensor is activated. 1
c04

Systems Inc.
Message display
7 6 5 4 3 2 1 0
c05 Finisher Staple Tray Paper is on the tray. 1
Automatic Duplex Unit Sensor 4 Sensor is activated. 1
c06
Finisher Tray Home Position Tray in home position. 1
Finisher Paper Feed Sensor Sensor is activated. 1
JAM Door (4th cassette) Door is open. 1
c07
Paper Upper Limit (4th cassette) Upper Limit is detected. 1
Paper Cassette Sensor (4th cassette) Paper Cassette is detected. 1
Paper Sensor (4th cassette) Paper is detected. 1
Finisher Tray Lower Limit Lower limit is detected. 1
Finisher Tray Upper Limit Upper limit is detected. 1
JAM Door (3rd cassette) Door is open. 1
c08
Paper Upper Limit (3rd cassette) Upper Limit is detected. 1
Paper Cassette Sensor (3rd cassette) Paper Cassette is detected. 1
Paper Sensor (3rd cassette) Paper is detected. 1
Finisher Back-Roller Home Position Home position is detected. 1
Finisher Front Alignment Plate Home
Home position is detected. 1
Position
JAM Door (2nd cassette) Door is open. 1
c09
Paper Upper Limit (2nd cassette) Upper Limit is detected. 1
Paper Cassette Sensor (2nd
Paper Cassette is detected. 1
cassette)
Paper Sensor (2nd cassette) Paper is detected. 1
Systems Inc.
Message display
7 6 5 4 3 2 1 0
Finisher End Alignment
Home position is detected. 1
Plate Home Position
Finisher Lever Home Position Home position is detected. 1
c10 Finisher Stapler Cartridge Cartridge is detected. 1
Paper Upper Limit (1st cassette) Upper Limit is detected. 1
Paper Cassette Sensor (1st cassette) Paper Cassette is detected. 1
Paper Sensor (1st cassette) Paper is detected. 1
Finisher Stapler detecting Sensor Stapler is not detected. 1
Finisher Stapler Cartridge Home Home position is not
1
Position detected.
c11 Sheet Bypass Paper Length Paper is detected. 1
Sheet Bypass Paper Length (A3) Paper is detected. 1
Sheet Bypass Paper Length (B4) Paper is detected. 1
Sheet Bypass Paper Paper is detected. 1
Finisher Stapler Top Stapler top is detected. 1
Finisher Joint Finisher joint is closed. 1
Toner Cartridge Toner cartridge is detected. 1
c12 Paper Transport Unit Door
Paper Transport Unit Door 1
is closed.
Front Door Front Door 1
Right Size Door Right Size Door is closed. 1
c13-
Not used
c19
Systems Inc.
Message display
7 6 5 4 3 2 1 0
Platen Original Size Sensor Original is on the C point. 1
Platen Original Size Sensor Original is on the B point. 1
Platen Original Size Sensor Original is on the A point. 1
c20
Platen Original Size Sensor Original is on the Z point. 1
Platen Original Size Sensor Original is on the Y point. 1
Platen Original Size Sensor Original is on the X point. 1
Scanner Home Position Home position is detected. 1
ADF/Platen Cover ADF/Platen Cover is open. 1
c21
ADF/Platen Cover is open
ADF/Platen Cover Angle 1
more than angle of 30.
c22-
Not used
c29
ADF Read Point 2 Sensor Sensor is activated. 1
ADF Read Point Sensor Sensor is activated. 1
c30 ADF Eject Sensor Sensor is activated. 1
ADF Reverse Door Door is open. 1
ADF Door Door is open. 1
ADF Document Sensor Sensor is activated. 1
ADF Document Width Sensor
A4/Letter size is detected. 1
(A4/Letter)
c31 ADF Document Width Sensor (B4) B4 size is detected. 1
ADF Document Width Sensor (A3) A3 size is detected. 1
ADF Document Length Sensor 2 Sensor is activated. 1
ADF Document Length Sensor 1 Sensor is activated. 1
c32-
Not used
c39
Systems Inc.
2. Output check
No. Item Function
c41 Key counter
c42-
Not used
c49
c50 Main Motor
c51 High Voltage Charge AC
c52 High Voltage Charge DC
c53 High Voltage Development Need High Probe
c54 High Voltage Transfer
c55 High Voltage Cleaning
c56 Fan
c57 Power Supply for Fan
c58-
Not used
c59
c60 Fuser Lamp
c61 Registration Clutch
c62 Polygon Motor
c63 1st Cassette Paper Drive Clutch
c64 1st Cassette Lift-up Motor
c65-
Not used
c69
c70 2nd Cassette Paper Drive Clutch
Systems Inc.
c72 2nd Idle Clutch
c73-
Not used
c74
c75 3rd Cassette Motor
c76 3rd Cassette Paper Drive Clutch
c77 3rd Cassette Lift-up Motor
c78 3rd Idle Clutch
c79 Not used
c80 4th Cassette Paper Drive Clutch
c81 4th Cassette Lift-up Motor
c82 4th Idle Clutch
c83-
Not used
c84
c85 Sheet Bypass Clutch
c86-
Not used
c99
Automatic Duplex Unit Solenoid (Eject
c100
2)
Automatic Duplex Unit Solenoid (Eject
c101
1)
Automatic Duplex Unit Motor Drive
c102
(Eject to Outer Tray)
Automatic Duplex Unit Motor Drive
c103
(Enter to Duplex Unit)
Dual-Path Exit Guide Unit Solenoid
c104
(Enter to Paper Transport Unit)
Dual-Path Exit Guide Unit Solenoid
c105
(Enter to Duplex Unit)
c106-
Not used
c109

Systems Inc.
No. Item Function
c110 Finisher Paper Eject Motor
c111 Finisher Paper Alignment Motor
c112 Finisher Front Alignment Motor
c113 Finisher End Alignment Motor
c114 Finisher Stuck Tray Motor
c115 Finisher Stapler Motor
c116-
Not used
c119
c120 Xenon Lamp

Systems Inc.
F5 mode Copier function programming
F5 mode Copier function programming
No. Item Function Factory setting
0 Country version 0: Japanese 1 (North America)
1: North American 2 (Europe/Others)
2: European 3 Other (China)
3: Others (China)
1 - 10
Not used
11 Copy reservation function 0: No 1: Yes 1
12 - 13
Not used
14 Paper Size( Tray 1 ) 0: None 1: A3 2: B4 3: A4 4: A4R 10 (North America)
5: B5 6: B5R 7: A5 8: FLS 1 9: 1 (Europe/Others)
FLS 2 10: Ledger 11: Legal 12:
Letter 13: Letter R 14: Invoice
15 Paper Size( Tray 2 ) Same as F5-14 10 (North America)
1 (Europe/Others)
16 Paper Size( Tray 3 ) Same as F5-14 0
17 Paper Size( Tray 4 ) Same as F5-14 0
18-19 Not used

Systems Inc.
20 ADF / iADF 0: Off (No detect the option) 1
1: Auto
Escape the service mode and
reboot the machine after setting
the parameter to activate the
setting.
21 Finisher 0: Off (No detect the option) 1
1: Auto
setting.
22 3rd Paper Feed Unit 0: Off (No detect the option) 1
1: Auto
setting.

Systems Inc.
23 Paper transport unit 0: Off (No detect the option) 1
1: Auto
setting.
24 ADU 0: Off (No detect the option) 1
1: Auto
setting.

Systems Inc.
25 Dual-path exit guide unit 0: Off (No detect the option) 1
1: Auto
setting.
26 iADF 0: Off (No detect the option) 1
1: Auto
setting.
27-31 Not used
32 SADF default 0: No 1: Yes 0
33 Not used
34 Multi-Feed Default 0: Off 1: On 0
35 Finisher mode default 0: Non-sort 1: Sort 0
2: Staple 3: Group

Systems Inc.
36 Output Tray (Inner) 0: Off 1
1: Auto
reboot the machine after
setting
setting.
37 Output Tray (Outer) 0: Off 1
1: Auto
reboot the machine after
setting
setting.
38 Duplex Mode Default 0: No 1: 1 to 2 0
2: 2 to 2 3: Book to 2
39 Not used
40 Double count (Total 0: Single 1: Ledger/A3 2: 0
counter, Key counter, and Ledger/Legal/A3/B4
Electronic counter)
41 Count up timing 0: At paper feed roller clutch (and 1
sheet bypass solenoid)
1: At paper exit sensor

Systems Inc.
42 Key/Dept. Counter 0: Not installed 0
1: Key counter installed
2: Departmental counter
3: Card (For some countries
43 Key Counter Timing l ) as F5-41
same 0
44 Insert Paper Count 0: Does not count up 1
1: Yes (Count the blank paper for
OHP Interleaving)
45-49 Not used
50 Auto Exposure 0: No 1: Yes 2: Fix 2
(Text/Photo)
51 Multisize Rotation 0: No 1: Yes 0
(Image rotation at multi
size original)
52 Orig. Size Detect 0: Priority (Use the setting for F5- 1
(Auto original size 80)
detecting sensor) 1: Yes (Detection)
2: No (No Detection)

Systems Inc.
53 Not used
54 Margin Reduction 0: No 0
1: Yes
55 Margin Value Default 0: 5mm 1: 10mm 1
2: 15mm 3: 20mm
56 Edge Value Default 0: 5mm 1: 10mm 0
2: 15mm 3: 20mm
57 Book Value Default 0: 5mm 1: 10mm 1
2: 15mm 3: 20mm
58 Not used
59 Copier operation (After 0: Stop (Copier stops or copy 0
"U13" Toner bottle empty cycle is inhibited)
detection) 1: Continue (Continuous copier
operation)
60 Auto Tray Selection 0: No (Manual) 1
1: Yes (Auto)
61-62 Not used 0

Systems Inc.
63 U13 clear=After toner 0: Any keys (When clearing U13, 0
empty detection (Copier press any key.)
stops or copy cycle 1: User key (Press FUNCTION
inhibited) key and digit key 1.)
64-65 Not used
66 Interleave default 0: Blank 1: Copy 0
67-68 Not used
69 Reduce N-in-1 Space 0: No 1: Yes 0
70 PM (Preventive 0: No call 1: 1.5K 2: 2.5K 3: 5K 4: 12
maintenance) 10K 5: 15K 6: 20K 7: 30K 8: 40K
9: 60K 10: 80K 11: 90K 12: 120K
13: 160K
72 Not used
73 PM (OPC Drum) 0: No (No indication) 0
(Preventive maintenance 1: Yes (Indication)
for OPC Drum)

Systems Inc.
74 PM (Process Unit) 0: No (No indication) 0
(Preventive maintenance 1: Yes (Indication)
for Process Unit)
75 T/P Area Detection 0: Off 0
(Text/Photo mode photo 1: On
area detection)
76 Automatic Exposure 0: Off 2
(Text) 1: On
2: Fix
77 Text Error Diffusion 0: Off 1
1: On (Execute error diffusion
on Text mode.)

Systems Inc.
Systems Inc.
Systems Inc.
Systems Inc.
F6 mode Adjustment and Programming

Systems Inc.
Systems Inc.
Modulation Transfer Function
Systems Inc.
Systems Inc.
Systems Inc.
F7 mode electronic counter
Item Function
1 Key Operator's identification code for
Key Operator ID
access to the counter mode.
2 Maintenance 0 Total count Total count of all copies / prints.
Count 1 PM count Permaintenance count
2 Scanner PM count Total count for scanner read.
3 ADF/iADF PM count Total count for originals fed.
4 Cartridge PM count Total count for Toner cartridge
5 OPC Drum count Total count for OPC Drum paper fed.
6 Process Unit Count Total count for Process Unit paper fed.
3 Paper Feed Sheet bypass count Total count of paper fed from the sheet
0
Count bypass.
1st Paper Tary count Total count of paper fed from the 1st
1
paper tray.
2nd Paper Tary count Total count of paper fed from the 2nd
2
paper tray.
3rd Paper Tary count Total count of paper fed from the 3rd
3
paper tray.
4th Paper Tary count Total count of paper fed from the 4th
4
paper tray.

Systems Inc.
Item Function
Electronic 4 Scanner Total count of originals fed
0 ADF/iADF count
counter Count throughout the ADF/iADF.
Total count of originals
1 ADF/iADF Read count scanned throughout the
ADF/iADF.
Total count of scanning
2 Scanner count
operation.
3 Scanner read count Total count of scanner read.
5 Copier
0 Copy print count Total count of copies printed.
Count
Total count of copies
1 Copy scan count
scanned.
6 PC Count Total count of printed from
0 PC Print count
PC.
Total count of scanned from
1 PC Scan count
PC.
8 Fax Count Total count of Fax
0 Total count of FAX transmitt
transmitted.
1 Total count of FAX received Total count of Fax received.
2 Total count of FAX printed. Total count of Fax printed.
9 Clear all counters All counters are cleared.

Systems Inc.
DP-2500 Service mode for FAX
No. Service Mode Description
Prints the Function Parameter List, Page
1 Function Parameter Setting Memory Test, Printer Report, All Document
File, Protocol Trace and Toner Order Form.
2 Not used
Prints the Function Parameter List, Page
3 Print Parameter List / Reports Memory Test, Printer Report, All Document
File, Protocol Trace and Toner Order Form.
Generates various binary, tonal and DTMF
4 Modem Tests
signals, by the modem.
5 Not used
Initialize RAM and restore the default value of
6 RAM Initialization
the function parameters.
7 Not used
Allows input of information for Service Alert
8 Check & Call Report, Maintenance Alert Report and Toner
Order Form.
Used for Firmware Update, Firmware
Backup, Parameter Restore, Parameter
9 System Maintenance Backup, Transferring Firmware from the PC
to the Flash Card and Sending a Received
File during a fatal printer error.
Systems Inc.
FAX
FAX Service
Service Mode
Mode Function
Function Table
Table
Number
Service
ServiceMode(1-9)
Mode(1-9) 1:Function Parameter Parameter Setting( 000-299 ）
Enter
Enterthe
thenumber
number Setting Enter Parameter No. Select the No.
STOP
2: Not used
1: Function Parameter List
3: Page Memory Test
4: Printer Report
3: Print Parameter List/ 5: All Document Files
Reports 6: Protocol Trace
7: Toner Order Form
4: Modem Test 1: Signal Test

2: Tonal Test
3: DTMF Test
5: V.34 Modem Test
5: Not used

Systems Inc.
99: Shipment Set(A)
Except parameter 80, 81
98: Shipment Set(B)
Except parameter 61,80,81
6: RAM Initialize 97: Flash Memory Clear
1#: Manufacture Set
16: LBP Error Log Clear
15: Logo/ID/PSWD Clear
14: All Job Clear
13: Program Dial Clear
12: ABBR. Dial Clear
11: Journal Clear
*: Parameter Initialize
7: Not used
1: Service Alert Fax. No.
2: Maint. Alert Fax No.
3: Toner Order Fax No.
8: Check & Call 4: Toner Order Tel No.
5: Dealer Name
6: Customer ID
7: Printer Report XMT
1: Firmware update
2: Firmware Backup
9: System Maintenance 3: Parameter Restore
4: Parameter Backup
Matsushita Graphic Communication5: PC→Flash Card 87
Systems Inc. 8: Send Received File
FAX Service Mode 1
No. Parameter Selections Function
000 MON/TEL DIAL 1 = Monitor Selects whether the machine starts to TX
2 = TEL/DIAL automatically during On-Hook dialing.
Monitor : Start to TX after pressing START
TEL/DIAL : Start to TX automatically
001 ALARM STATUS 1 = OFF Selects the No Paper or No Toner alarm status.
2 = Timer (6 sec.) OFF : Alarm is disabled.
3 = Constant Timer : Alarm will shut off after 6 seconds.
Constant : Alarm will not stop until "STOP" is
pressed or the error is cleared/corrected.
002 STOP COMM. JRNL 1 = Off Selects whether the machine prompts to print
2 = On the COMM. Journal when the printout condition
is set to INC and STOP is pressed during
communication.
003 CONTINUOUS 1 = Off
POLL 2 = On
004 NUMERIC ID SET 1 = Off (will not accept) Selects whether the machine accepts and
2 = On (accepts) allows to set or change the Numeric ID.
005 COUNTRY CODE
006 ID DISPLAY 1 = Number (Numeric ID) Selects the contents of the ID to display on the
2 = Received ID Journal.
007 JNL COLUMN 1 = Preset station name Selects the contents of the ID to display on the
2 = Received ID Journal.

Systems Inc.
FAX Service Mode 1
008 MONITOR 1 = Off Selects whether the Monitor is ON/OFF for
2 = On monitoring fax signals.
(FOR SERVICE USE ONLY)
009 DC LOOP 1 = Off (Normal) Selects a false Off Hook state for back to back
2 = On (Off Hook) communication test.
010 TX LEVEL 00 = 0 dBm Selects the TX signal output level, 0 to -15 dBm
~ in 1 dBm steps.
15 = -15 dBm
011 RX LEVEL 1 = -43 dBm Selects the receiving sensitivity of -33/-38/-43/-
2 = -38 dBm 48 dBm.
3 = -33 dBm
4 = -48 dBm
012 DTMF LEVEL 00 = 0 dBm Selects the TX signal output level, 0 to -15 dBm
~ in 1 dBm steps.
15 = -15 dBm
013 G3 RX EQL 1 = 0dB Selects the cable equalizer for G3 reception
2 = 4dB mode, 0dB, 4dB, 8dB or 12dB.
3 = 8dB
4 = 12dB
014 G3 TX EQL 1 = 0dB Selects the cable equalizer for G3 transmission
2 = 4dB mode, 0dB, 4dB, 8dB or 12dB.
3 = 8dB
4 = 12dB
015 - Not Used
016
Systems Inc.
FAX Service Mode 1
017 TX START 1 = 2400 bps Selects the transmission modem start speed,
2 = 4800 bps 14400/12000/TC9600/TC7200/9600/7200/4800/
3 = 7200 bps 2400 bps.
4 = 9600 bps Note: This parameter is applicable only when
5 = TC7200 bps communicating with regular G3 machines.
6 = TC9600 bps When communicating with Super G3 (V.34)
7 = 12000 bps machines, use Parameter No. 32.
8 = 14400 bps
018 RX START 1 = 2400 bps Selects the reception modem start speed,
2 = 4800 bps 14400/12000/TC9600/TC7200/9600/7200/4800/
3 = 7200 bps 2400 bps.
4 = 9600 bps Note: This parameter is applicable only when
5 = TC7200 bps communicating with regular G3 machines.
6 = TC9600 bps When communicating with Super G3 (V.34)
7 = 12000 bps machines, use Parameter No. 33.
8 = 14400 bps
019 ITU-T V.34 1 = Off Selects whether the ITU-T V.34 is Off, On or
2 = On Select. Select: Select whether the ITU-T V.34 is
3 = Select Off or On, when entering One-
Touch/Abbreviated/Phone book Dialing
Numbers or Manual Number Dialing.
020 ITU-T ECM 1 = Off (Invalid) Select the ECM mode.
2 = On (Valid)
021 EP TONE 1 = Off (without EP Tone) Selects whether to add the echo protect tone
2 = On (with EP Tone) on V.29 mode.
(Used when Echo Suppression is disabled.)
On: Add
Off: Do not add
Systems Inc.
FAX Service Mode 1
022 SIGNAL INTERVAL1 = 100 ms Selects the time interval between the receiving
2 = 200 ms signal and the transmitting signal.
3 = 500 ms
023 TCF CHECK 1 = Normal (Short) Selects the TCF check interval Long/Short
2 = Long
024 CED FREQUENCY 1 = 1080 Hz (non ITU-T) Selects the CED frequency 2100/1080 Hz
2 = 2100 Hz
025 COMM. START-UP 1 = 1’st response Selects the communication start-up condition
2 = 2’nd response (XMT and Polling).
026 NON-STANDARD 1 = Off (Invalid) Selects own mode (Panafax mode).
2 = On (Valid)
027 SHORT 1 = Off (Invalid) Selects the short protocol mode.
PROTOCOL B 2 = On (Valid)
028 SHORT 1 = Off (Invalid) Selects the short protocol mode.
PROTOCOL D 2 = On (Valid)
029 REMOTE 1 = Off (will not accept) Selects whether the machine accepts the
DIAGNOSTICS 2 = On (accepts) Remote Diagnostics from the service station.
030 CED & 300 bps 1 = 75 ms Selects the pause interval between the CED
2 = 1 sec and the 300 bps signal.
031 RTC = EOLx12 1 = Off (EOLx6) Selects the RTC signal, EOLx6 or EOLx12.
2 = On (EOLx12)
032 V34 TX START 2400-33600bps Selects the transmission modem start speed
for V.34 communication, 33600-2400 bps.
033 V34 RX START 2400-33600bps Selects the receiving modem start speed for
V.34 communication, 33600-2400 bps.
Systems Inc.
FAX Service Mode 1
034 V34 TX Symbol Rate 2400-3429sr Selects the transmission symbol rate for V.34,
3429/3200/3000/2800/2400 sr.
Press “LETTER/A4“ or “INVOICE/A5“ to select
the symbol rate.
035 V34 RX Symbol Rate 2400-3429sr Selects receiving symbol rate for
V.34,3429/3429/3200/3000/2800/2400 sr.
Press “LETTER/A4“ or “INVOICE/A5“ to select
the symbol rate.
036 Not Used
037 PROTOCOL 1 = Off (not displayed) Selects whether to display the modem speed
DISPLAY 2 = On (displayed) during communication. (Press “LETTER/A4“ or
“INVOICE/A5“ to display)
038 Not Used
039 FLASH TIME 5 = 50 ms Selects the pause interval before activating the
~ Flash key.
100 = 1000 ms
040 E/F TIME (For 5 = 50 ms Selects the pause interval before activating the
Germany, Austria ~ Flash key.
and Switzerland 100 = 1000 ms
only)
041 PAUSE TIME 1 = 1 sec. Selects the pause interval from 1 sec. ~ 10
~ sec. For dialing through a switchboard or for
10 = 10 sec. international calls.
042 Not Used
043 REDIAL INTERVAL 0 = no waiting Selects the redial interval from 0 to 15 minutes
~ in 1 minute steps.
15 = 15 minutes
Systems Inc.
FAX Service Mode 1
044 REDIAL COUNT 0 = no redial Selects the redial count from 0 to 15 times in 1
~ step intervals.
15 = 15 times Note: In order to comply with the requirements
TBR21 in the EC countries, do not select 15
times.
045 RING DETECT 1 = 1 ring Selects the ring detection count from 1 to 9
COUNT ~ rings in 1 ring step intervals.
9 = 9 rings
046 ON-HOOK TIME 0 = 0 sec. Selects the on-hook time between sequential
~ communication calls in 1 second step intervals.
90 = 90 sec.
047 RESPONSE WAIT 1 = 1 sec. Selects the waiting interval for the response
~ after completing the dialing.
90 = 90 sec.
048 - Not Used
049
050 RING DETECT 1 = Normal Selects the quality of ringer detection. Use if the
MODE 2 = Rough line signal is out of regulation, set to "Rough" so
that the unit may detect the ringing signals.
051 Not Used
052 PULSE RATE 1 = 10 pps Selects the dial pulse rate 10/20 pps.
2 = 20 pps
053 - Not Used
054
055 BUSY TONE 1 = Off Selects whether to detect the Busy Tone.
CHECK 2 = On
Systems Inc.
FAX Service Mode 1
056 DIAL TONE CHECK 1 = Off Selects whether to detect dial tone before
(Except for USA and 2 = On dialing the telephone number.
Canada version)
057 DC LOOP CHECK 1 = Off (will not check) Selects whether the unit checks the DC Loop
(Except for USA and 2 = On (checks) during communication.
Canada version)
058 COMM.JRNL 1 = Off (without image) Selects whether the machine prints the COMM.
+IMAGE 2 = On (with image) Journal with image.
059 CONFIDENTIAL 1 = Off (does not print out) Selects whether the machine prints the
RCV REPORT 2 = On (prints out) CONFIDENTIAL RCV REPORT.
060 VERSION Indicates the FAX software version.
061 TX/RX//PRT/CPY TX/RX/PRT/CPY Displays the transmitted, received, total printed
COUNTER and copied document count.
062 PRINT COUNTER 1 = Off Selects whether to print in the Fax Parameter
2 = On List, the counter information that is displayed in
the Function Parameter No. 61.
063 - Not Used
067
068 NYSE FAX 1=Off Selects whether the machine will forward the
FORWARD 2=On incoming and outgoing faxes to a specified
station.
069 NYSE LOCAL PRINT 1=INC Selects the printing condition for the incoming
2=ON faxes after FAX Forwarding.
(Always) INC. : Prints only if FAX Forwarding fails.
ON : Always prints.
Systems Inc.
FAX Service Mode 1
070 LINE ERROR 1 = 128 lines 1. Selects the line disconnect condition during
2 = 256 lines reception. If the number of line errors exceed
3 = 512 lines this setting, the unit will disconnect the line.
4 = 1024 lines 2. Selects the transmit condition of RTP/PIP or
5 = 2048 lines RTN/PIN. (Available if No.73 ERROR DETECT
6 = Off (will not disconnect is set to "LINES") (S
line)
071 TOTAL ERROR 1 = 5% Selects the transmit condition of RTP/PIP or
2 = 10% RTN/PIN. (Available if No.73 ERROR DETECT
3 = 15% is set to "RATE") (See Note 2)
4 = 20%
072 CONTINUOUS 1 = Off (unlimited) Selects the continuous total error criteria of
ERROR 2 = 3 lines/STD Off/3/6 or 12 lines in Standard mode. If
3 = 6 lines/STD continuous total error exceeds this setting, the
4 = 12 lines/STD unit will transmit RTN/PIN. (Available if No.73
ERROR DETECT is set to “RATE”.)
073 ERROR DETECT 1 = Lines Selects the error detect condition Lines/Rate.
2 = Rate
074 RTN RECEIVE 1 = Disconnect Selects whether to disconnect the phone line or
2 = Continue continue when "RTN" is received.
075 CODING 1 = MH (MH only) Selects the coding scheme.
2 = MR (MH or MR)
3 = MMR (MH or MR or MMR)
4 = JBIG
076 Not Used
Systems Inc.
FAX Service Mode 1
077 RX JAM LENGTH 1 = Off (unlimited) Selects the maximum length of a received
2=2m document that can be printed.
3=8m
078 - Not Used
079
080 DOC TOP FEED -5.0 mm Adjusts the distance between the scanning
~ sensor ON position and the scanning start
+5.0 mm position.
081 DOC END FEED -5.0 mm Adjusts the distance between the scanning
~ sensor OFF position and the scanning end
+5.0 mm position.
082 JAM LENGTH 1=1m Selects the maximum length of the document
2=2m that can be scanned.
3=8m
4 = Unlimited
083 Not Used
084 LINE AS NO PAPER 1 = Ring (ring) Selects whether to ring or send a busy tone to
2 = Busy (keep line busy) the remote station when the recording paper
runs out or the unit cannot receive because of
any trouble.
085 Not Used
086 REDUCTION FINE 1 = Off Selects whether the resolution is preset to Fine,
2 = On when sending with reduction B4 → A4.
087 DARKER LEVEL 0 = Lightest Contrast Selects the contrast level.
088 NORMAL LEVEL ~ 0: Lightest → 15: Darkest
089 LIGHTER LEVEL 15 = Darkest Contrast
Systems Inc.
FAX Service Mode 1
090 - Not Used
091
092 SMOOTHING 1 = Off Selects whether the smoothing function is
2 = On available.
093 - Not Used
109
110 MAC ADDRESS Indicates the MAC Address.
111 LAN I/F ROM VER Indicates the LAN I/F Firmware version.
112 INSERT EMAIL TXT 1 = Off Selects whether the Text Template (email
2 = On message) is programmable and added on all
email sent in the message body above the top
line of text. (Up to 40 characters Programmed
in the User Parameters.)
113 Not Used
114 SYMBOL SET 1=Standard Selects whether the extended symbols other
2=Extended than "%" is available for Internet Parameters
entry.
115 TIME ZONE 1=SCROLL Selects the setting method for Time Zone.
2=DIRECT Scroll: Allows using “Scroll Keys” to scroll
through the Time Zone Table.
Direct: Allows you to input the Time Zone
directly, (*)key to be used as a switch between
+/-.
116 OVERWRITE 1 = Yes Selects whether the Overwrite Warning is
WARNING 2 = No included on the Internet FAX Result Receipt
when programming the Auto Dialer via email.
Systems Inc.
FAX Service Mode 1
117 - Not Used
129
130 BUSY-ACK TIMING • In Busy Selects the signal timing between the BUSY
• After Busy and ACK signal in Printer Interface Mode.
• While Busy
131 CMD RCV GRD 1 min. Selects the Guard Timer between each GDI
TIMER ~ Command in Printer Interface Mode.
15 min.
132 PRT DATA TIMER 1 min. Selects the Guard Timer between each GDI
~ Data Frame in Printer Interface Mode.
15 min.
133 - Not Used
134
135 JOB END TIMER 1 sec. Selects the Guard Timer while printing a data
~ with the PDL Printer Driver ver. 6.
999 sec.
136 JAM RECOVERY 1 = Off Selects the JAM Recovery function in the PDL
2 = On Printer Interface Mode.
Off: Printing performance is faster, however if a
paper jam occurs the jammed pages will not be
reprinted automatically.
On: Printing performance is slower, however if
a paper jam occurs
137 - Not Used
159
Systems Inc.
FAX Service Mode 1
160 VERSION Indicates the ROM version on PDL Firmware version
the FRM PC Board.
161 - Not Used
199
From No.209 to No.260 parameters for 2nd G3 FAX

comm． Port Kit. All Function parameters are same as
channel 1 setting parameter.
FAX Service Mode 2

Not Used.

Systems Inc.
FAX Service Mode 3
Print the Function Parameter List, Page Memory Test,
Printer Report, All Document File, Protocol Trace and
the Toner Order Form.
FAX Service Mode 4

Modem signal test (except V.34)
V21 300bps, V27ter 2400bps, V27ter 4800bps,
V29 7200bps, V29 9600bps, V17 TC7200bps,
V17 TC9600bps, V33 12000bps, V33 14400bps
FAX Service Mode 5

Not Used.

Systems Inc.
FAX Service Mode 6
Initializes RAM and restores the Function Parameters to their default values.
Note: This operation should be performed when the unit is first installed.
No. Initialize Mode Description

99 SHIPMENT SET (A) Deletes all setting information, except parameter number
80 and 81, then set default values.
98 SHIPMENT SET (B) Deletes all setting information, except parameter number
61, 80 and 81, then set default values.
97 FLASH MEMORY CLEAR Deletes all information in the Flash Memory.
1# MANUFACTURE SET Factory use only. DO NOT USE IN THE FIELD.
16 LBP ERROR LOG CLEAR Clears the Printer Error Log.
15 LOGO/ID/PSWD CLEAR Clears the Logo, ID, Polling Password.
14 ALL JOB CLEAR Clears all Jobs stored in Flash Memory.
13 PROGRAM DIAL CLEAR Clears the Program keys.
12 ABBR. DIAL CLEAR Clears the One-touch and ABBR Numbers.
11 JOURNAL CLEAR Clears the Journal contents.
* PARAMETER INITIALIZE Restores the Fax and Function Parameters to default
values.

Systems Inc.
FAX Service Mode 8
This feature enables the Authorized Servicing Dealers to manage and
improve the Fax machine maintenance to their customers by alerting
them of equipment problems. It also can be used as a Supply Sales Tool
by alerting the Dealer that the unit is running Low on Toner.
1. The machine’s printer error information is stored in the

Printer Report.
2. The printer report can be manually printed when required.
3. When printer errors occurs, the unit can automatically
transmit the Service Alert Report to the pre-registered
telephone number or email address.
4. When the unit detects Low Toner, it can automatically
transmit the Maintenance Alert Report to the pre-registered
telephone number or email address.
5. When the unit detects Low Toner, it can automatically print
out the Toner Order Form with pre-registered order
information.

Systems Inc.
Check and Call Function
This feature enables the Authorized Servicing Dealers to manage
and improve the Fax machine maintenance to their customers by
alerting them of equipment problems. It also can be used as a
Supply Sales Tool by alerting the Dealer that the unit is running
Low on Toner.
Low Toner or Manual print

Maintenance
PM timing is Toner order form
Alert Report
detected
Automatic transmission
Service Printer Problem

Alert Report is detected

Systems Inc.
Conditions under which a report can be printed or transmitted
1. Manual print
The Printer Report can be printed by Service Mode 3.
2. Automatic transmission/printout
a. Service Alert Report
When the unit detects an Emergency Printer Error, the unit will
immediately transmit the Service Alert Report to the pre-registered
telephone number or email address. However, the unit will not
transmit the Service Alert Report if it finds the same error within the
same date in the error log.
b. Maintenance Alert Report
When the unit detects Low Toner, the unit can automatically transmit
the Maintenance Alert Report to the pre-registered telephone number
or email address. Refer to the Printer Error Code Table.
c. Toner Order Form
When the unit detects Low Toner, the unit can automatically print the
Toner Order Form with the pre-registered order information.
Systems Inc.
Printer Error Code Table
Printer
Info. Log Tx
Error Content of Error
Code only Report
Code
E1-20 22 0 0 Laser unit horizontal synchronization error.
Polygon motor does not reach to constant speed within
E1-22 20 0 0
specified time.
21 0 0 Feeder Paper Lift up error
E3-20 41 0 0 Polygon motor does not rotate constantly.
E4-01 10 0 0 Fuser temperature does not increase even heater on.
11 0 0 Fuser temperature does not decrease even heater off.
12 0 0 Overshoot or undershoot occurred.
13 0 0 Thermister open.
14 0 0 Detect overheat.
E4-10 30 0 0 Exhaust fan motor (1) does not rotate.
E5-11 40 0 0 Fuser Thermistor and Toner sensor error.
E5-12 - 0 0 Main CPU/LPC interface error.
E5-22 51 0 0 Finisher/LPC unit interface error.
Note:
Transmission Report: 0 =Service Alert Report, x =Maintenance Alert Report

Systems Inc.
Printer
Info. Log Tx
Error Content of Error
Code only Report
Code
E7-10 - 0 0 Sub CPU system error.
E7-11 - 0 0 Scanning abnormal from Platen Glass.
E7-12 - 0 0 Xenon Lamp is disconnected.
E7-20 - 0 0 Finisher paper exit motor.
E7-21 - 0 0 Finisher paper exit motor.
E7-22 - 0 0 Finisher tamper motor.
E7-23 - 0 0 Finisher staple motor.
E7-27 - 0 0 Finisher tray shift motor.
E7-28 - 0 0 Finisher bundle process motor.
E13 - Out of Toner.
J00 80 0 Paper jam. Refer to the Jam Error Code Table for details.
J01 81 0
J02 82 0
J03 83 0
J04 84 0
J07 85 0
J08 86 0
J09 87 0
J12 89 0
J13 8A 0
J14 8B 0
Systems Inc.
Printer Printer
Info. Log Tx Info. Log Tx
Error Content of Error Error Content of Error
Code only Report Code only Report
Code Code
J22 70 0 J57 A6 0
J23 71 0 J57 AA 0
J24 72 0 J58 A7 0
J30 88 0 J58 AB 0
J33 73 0 J59 76 0
J34 B4 0 J59 77 0
J40 8C 0 J59 78 0
J41 8D 0 J59 79 0
J42 74 0 J60 C0 0
Paper jam. Refer to the Paper jam. Refer to the
J45 8E 0 J61 C5 0
Jam Error Code Table Jam Error Code Table
J46 8F 0 J62 C1 0
for details. for details.
J47 75 0 J63 C2 0
J50 A0 0 J64 C3 0
J51 A1 0 J65 C4 0
J52 A2 0 J66 C6 0
J53 A3 0 J67 C7 0
J55 A4 0 J80 B0 0
J55 A8 0 J81 B1 0
J56 A5 0 J82 B2 0
J56 A9 0 J83 B3 0

Systems Inc.
Printer Printer
Info. Log Tx Info. Log Tx
Error Content of Error Error Content of Error
Code only Report Code only Report
Code Code
J84 B5 0 U1 61 Front Cover Open.
J85 B6 0 U1 62 Right Cover Op
J86 B7 0 No Toner Cartridge is
J87 B8 0 U13 60 installed.
J88 7A 0 U13 X Low Toner
U6 66 1st Feed Cove
J89 7B 0
U6 67 2nd Feed Cove
J89 7C 0
U6 68 3rd Feed Cove
J89 7D 0
U6 69 4th Feed Cove
J90 90 0
Paper jam. Refer to the Paper Transport Unit
J91 91 0 U8 6A Open.
Jam Error Code Table
for details.

Systems Inc.
Refer
Refer to
to Service
Service manual
manual
1. Information code
2. Check & Call

Systems Inc.
Information Code Table ( For Copier )
User Error Code( U Code )

Systems Inc.
Systems Inc.
Systems Inc.
Systems Inc.
Jam Error Codes ( J Code )

Systems Inc.
Systems Inc.
Systems Inc.
Systems Inc.
Mechanical Error Codes ( E Code )
The machine will indicate the error number (E mode) and then stop when the
SC PCB can not control system or any problem occurs.
Error codes indicate the error number which are alternately displayed in the
"digit" display area of the panel.
E1: Optical Unit Error

Systems Inc.
E2: Feeder Unit Error
E2 error code has been changed to U2 error code.
E3: Development System Error

Systems Inc.
E4: Fuser Unit Error

Systems Inc.
Systems Inc.
E5: System Error
E7: Optional Unit Error

Systems Inc.
Systems Inc.
Systems Inc.
Information Code Table ( For Fax )

Systems Inc.
Systems Inc.
Systems Inc.
Systems Inc.
Systems Inc.
Systems Inc.
Systems Inc.
Systems Inc.
Systems Inc.
Systems Inc.
The method of firmware up-date
F9 Service mode :
Insert FLASH ROM
SCB
SCBPCB
PCB CARD(4MB)
７:Firmware up-date
FROM
/ 0:All firmware CARD SCB PCB
F9 Service mode :
PDL/LAN
PDL/LAN Insert Flash ７：Firmware up-date Note : 1. FROM for other models
PCB ROM Card(2MB) / 3：PDL
PCB / ４：LAN PCB
are not accepted.
2. Up-date will not be done
when same version is
used.
Insert Flash ROM card Green indicator lights up

Control into socket and turn the ==> Flash
Control power SW On while ==> Off
panel
panelPCB
PCB energy save key is Ver. Up is completed (*)
pressed.
*: Energy save key is pressed for 20 seconds
G3
G3PCB
PCB Replace FRM PCB FRM G3
PCB
PCB
Systems Inc.
F9 mode System Maintenance
Item Function
Short-cut to enter into FAX All counters are cleared when the Start key is
0
Service Modes. pressed.
Displays the contact number when the machine
1 Telephone number input
malfunction occurs.
0 Host Displays the software version for host.
1 Panel Displays the software version for panel.
2 Scanner Displays the software version for scanner.
3 Printer Displays the software version for printer.
ROM 4 Finisher Displays the software version for finisher.
2
version 5 PDL Displays the software version for PDL.
6 LAN Displays the software version for LAN.
7 2nd G3 Fax Displays the software version for 2nd G3 Fax.
8 Not used
9 Modem Displays the software version for modem.
0 F5/F6 Print out the memory contents of the F5 and F6
Machine
1 Print out the machine parameters.
parameters
3 Print out
2 Counter Print out the counters.
3
4
Systems Inc.
4 RAM Edit Mode
5 PC Parameter
0 F5/F6 parameters Deletes all setting information for F5 and F6.
1 All job clear Clears all Jobs stored in Flash Memory.
Printer error LOG
RAM 2 Clears the Printer Error Log.
6 clear
Initialization
3 Manufacture set Factory use only. DO NOT USE IN THE FIELD.
4 Shipment set Deletes all setting information.
5 LBP fuser reset Clear the LBP fuser error.
0 All firmware
1 Copy firmware
Firmware Updates the firmware in the machine with the
7 2 Fax firmware
Update Master Firmware Card.
3 PDL firmware
4 LAN firmware
Creates a Backup Card of the machines
0 All firmware firmware. (A 4 MB or higher Flash Memory Card
Firmware
8 is required)
Backup
1 Copy firmware Creates a Backup Card of the mechanizes
2 Fax firmware firmware. (A 2 MB or higher Flash Memory Card
Creates a Master Firmware Card using the
9 PC →FLASH CARD Firmware Update Kit. (A 4 MB or higher Flash
Memory Card is required)
Systems Inc.
FAX Service Mode 9
This Service Mode is used to maintain and/or update the firmware of the machine.
System Maintenance Table
No. Maintenance Mode Description

Updates the firmware in the machine with the Master Firmware
1 FIRMWARE UPDATE
Card.
Creates a Backup Card of the machine’s firmware.
2 FIRMWARE BACKUP
(A 2 MB or higher Flash Memory Card is required)
PARAMETER Restores the parameters from the Backup Card into the
3
RESTORE machine.
Creates a Backup Card of the machine’s parameters.
4 PARAMETER BACKUP
Creates a Master Firmware Card using the Firmware Update
5 PC →FLASH CARD
Kit.(A 2 MB or higher Flash Memory Card is required)
Transfers documents from memory to another fax machine
8 SEND RECEIVED FILE
during a fatal printer error.

Systems Inc.
Super PIXION (Scan Data Control )
Sort Memory (STD 8MB+8,16,128MB OPT)

Sort memory controller Copy:JBIG Fax:MMR Data 32bit CPU
Page Memory
(18MB) 2MB EDO RAM Firmware F-ROM for
Copy program(2MB)
ADU OPT.+16MB
Firmware F-ROM
Image Data F-ROM (2MB)
Picture Editing Control (2MB)
Pixcel Magic / CODEC
OPT. Image Data F-ROM (4,8MB)

Laser Printer Block
PDL option
System Control Gate Array
Document Adapter for New Copier Engine

Laser Power Control
Parallel Port I/F PCB option
Recording Data Control
G3 2nd channel option or

10/100 Ethernet option FAX (1ch) option PCB (CPU is
not mounted) 2MB F-ROM for
Matsushita Graphic Communication Fax Program 139
Systems Inc.
Super PIXION (Scan Data Control )
Sort Memory (STD 8MB+8,16,128MB OPT)

Sort memory controller Copy:JBIG Fax:MMR Data 32bit CPU
Page Memory
(18MB) 2MB EDO RAM Firmware F-ROM for
Copy program(2MB)
ADU OPT.+16MB
Firmware F-ROM
Image Data F-ROM (2MB)
Picture Editing Control (2MB)
Pixcel Magic / CODEC
OPT. Image Data F-ROM (4,8MB)

Laser Printer Block
PDL option
System Control Gate Array
Document Adapter for New Copier Engine

Laser Power Control
Parallel Port I/F PCB option
Recording Data Control
G3 2nd channel option or

10/100 Ethernet option FAX (1ch) option PCB (CPU is
not mounted) 2MB F-ROM for
Matsushita Graphic Communication Fax Program 140
Systems Inc.
F-ROM
(Image
Data Mem)
(Smoothing)
COPY Mode

Systems Inc.
F-ROM
(Image
Data Mem)
(Smoothing)
Sort Copy

Systems Inc.
F-ROM
(Image
Data Mem)
(Smoothing)
Scan into memory for Fax

Systems Inc.
F-ROM
(Image
Data Mem)
(Smoothing)
Memory Reception

Systems Inc.
F-ROM
(Image
Data Mem)
(Smoothing)
Print Image Date from Memory

Systems Inc.
F-ROM
(Image
Data Mem)
Photo Mode
Text Mode (Smoothing)
Scan into PC
Systems Inc.
F-ROM
(Image
Data Mem)
GDI
PDL
(Smoothing)
Print from PC
Systems Inc.
Document Management System
Refer
Refer to
to User’s
User’s Guide
Guide && S/M
S/M
1. Firmware Update
2. Installation

Systems Inc.
Panasonic Document Management System (PDMS)
Document Manager (Main Console - Manage Image Document data)
• Scan / import the image
• Marge / Delete document data
• Sending document by FAX (class2 PC Fax application required)
• Print document
Document Viewer (Document data editor)
MFP Utilities
• Status Monitor -- Check the Unit condition visually
• Configuration Editor -- Set the user parameter, check unit configuration
• Auto Dialer Editor ( Phone Book Editor ) -- Edit Fax Phone Book
Port Controller (Back ground program for status monitor etc.)
Port Selection Utility (Select monitoring port)
Printer Driver / Twain Scanner Driver
Systems Inc.
Document Manager is application for managing image files.
By utilizing Document Manager and Document Viewer in combination,
a number of image files can be classified, managed, browsed, and edited.
Start
Selecting Panasonic - Panasonic Document Manager System - Document
Manager in Program of Start menu.

Systems Inc.
Document Manager
Editing and managing documents indicated by thumbnail images

by dragging and dropping.

Systems Inc.
Document Scanner
Image Scanning, an image is imported directly into a document using
TWAIN-compatible application.

Systems Inc.
Document Viewer
For editing documents (image files) to be managed with Document

Manager.

Systems Inc.
Status Monitor
Display current status of connected device. (DP-2500/DP-2000)

Systems Inc.
Configuration Editor
Edit the Function Mode setting. (DP-2500/DP-2000)

Systems Inc.
Phonebook Editor
Edit the Phonebook data for fax. (DP-2500/DP-2000)

Systems Inc.
Printer
Printer Setup
Setup (Parallel
(Parallel Port
Port ))
Installing the Printer Driver (Windows 95/98)
1. Open Printer dialog box.

① Click Start key.
② Place cursor on Settings then
Printer
2. Double-click Add Printer icon.
3. Click Next key.

Systems Inc.
4. Select Local Printer and click NEXT
key.
Note :Network printer can be select
when 10/100 Ethernet I/F is
installed.
5. ① Insert Driver CD-ROM comes with

Parallel Port Option
② Click Have Disk key.
6. ① Specify drive name and type

D：/Driver/Win9x.
（When drive D is CD-ROM drive.）
② Click OK key.

Systems Inc.
7. ① Select device （Panasonic DP-2000
or Panasonic DP-2500）
② Click Next key.
8. ① Select LPT1.
② Click Next key.
9. ① In response to Do you want your

Windows-based programs to use
this printer as the default printer?,
select Yes or No.
② Click Finish key.

Systems Inc.
10. Required files are copied.
Icons are displayed Printer window

and become available.

Systems Inc.
Configuring the Printer Driver Settings

Systems Inc.
Printing on Windows Application

Systems Inc.
Application>File menu>Input from Twain supported machine => Digital Docu-Scanner
Digital Docu-Scanner X
Exercise of
File(F) Tool(T) Help(H)
scanning operation
Image typeﾟ（Y) Monochrome
Resolution（R) 300X300(dpi)
Original size（A) A4
Fix （K)
Shreshold（L)
Image IEEE1284
（ECP)
Brightness（B)
Contrast（C)
Reverse（V) Edge enhance（D)
Output size
H X V：148X100 Image size : KB
Unit （U) mm
Scan（S) Preview（P) Enlarge（I) Matsushita

Reduction(O)Graphic Communication 163
Systems Inc.
Exercise of original scanning (Refer to User’s guide)
Menu :
- File : Close/Exit
- Tool : Gamma curve、Highlight＆shadow etc.
- Help : Contents
Parameter:
- Image type : Type of image to be scanned (Monochrome, Half-tone)
- Resolution : Resolution of scanned image
- Original size : Size of scanned image (Fixed format)
Parameter 2
- Threshold : Threshold level setting of Monochrome image
- Brightness : Brightness of half tone
- Contrast : Brightness of half tone
Button
- “Scan” : Image scanning by designated parameter.
- “Preview” : Indication of preview image (scanned in low resolution)
- “Enlarge” “Reduction” : Enlargement/reduction of preview screen
Systems Inc.

Dp2500self PDF

Uploaded by

Copyright:

Available Formats

Dp2500self PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Dp2500self PDF

Uploaded by

Copyright:

Available Formats

Matsushita Graphic Communication Systems Inc.

Corporate Overseas Sales Division

Matsushita Graphic Communication 3

Matsushita Graphic Communication 4

Matsushita Graphic Communication 6

2 Sided Printing (ADU) Inc : 16MB D-RAM

Matsushita Graphic Communication 9

Matsushita Graphic Communication 10

Matsushita Graphic Communication 11

iADF (2 Sided) Inverting Automatic Document Feeder DA-AR250

Matsushita Graphic Communication 13

Scanner Specification (Option)

Matsushita Graphic Communication 15

Matsushita Graphic Communication

1. Kit No : DQ-MAR250-PU ( 120K PM Kit )

2. Applicable Model : DA-AS200/DA-AR250

Matsushita Graphic Communication

2. Applicable Model : DP-2000/2500 / DA-DS200 / DA-DS210

Matsushita Graphic Communication

Matsushita Graphic Communication 19

Matsushita Graphic Communication 21

Combination (pattern 1) (pattern 2) (pattern 3) (pattern 4)

Matsushita Graphic Communication 22

Exit Tray(outer) Electric Sort Memory

Exit Tray(inner) Electric Sorting Board

Paper Transport Unit Automatic Duplex Unit

(Need the above unit when

Matsushita Graphic Communication 24

Network Printer 10/100 Ethernet I/F &

Local Printer Parallel Port

10/100 Ethernet I/F &

Main Unit FAX communication kit

Matsushita Graphic Communication 27

4th paper 3rd paper Electronic sorting board

2SIDED 1SIDED SHIFT

One Touch ON LINE

2SIDED 1SIDED SHIFT

One Touch ON LINE

Matsushita Graphic Communication 31

Matsushita Graphic Communication 32

Dual Path Exit Guide Unit

Matsushita Graphic Communication 33

Separation finger Pressure Roller

Thermistor Pressure Spring

Toner Cartridge Timing Roller

Heat Roller Pressure Roller

Paper Feed Feed Roller

Paper Feed Feed Roller

Paper Feed Feed Roller

Image Scanner Exit Roller

Paper Feed Feed Roller

Matsushita Graphic Communication 39

Read Point Image Scanner

Matsushita Graphic Communication 40

ADF ADF Roller 120K Fuser Unit Fuser Roller 120K

Torque Limiter Assy 120K Separation 120K

MAIN UNIT FAN 240K Transfer

Cleaning Blade: Urethane Rubber Bias Transfer Roller

Ozone Filter is not exist due to