Scribd
Upload
143 views1 page

Serial Interface Adapter (With M8 Connector) For FABER-COM Electronic Cards

The document describes a Serial Interface Adapter with an M8 connector for connecting FABER-COM electronic cards to a PC. The adapter allows for programming, calibration, firmware updating and monitoring working parameters of devices using the Windows application SepSim. The adapter comes with a 1.8m serial cable and supports communication between the device and PC.

Uploaded by

crash2804
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
143 views1 page

Serial Interface Adapter (With M8 Connector) For FABER-COM Electronic Cards

The document describes a Serial Interface Adapter with an M8 connector for connecting FABER-COM electronic cards to a PC. The adapter allows for programming, calibration, firmware updating and monitoring working parameters of devices using the Windows application SepSim. The adapter comes with a 1.8m serial cable and supports communication between the device and PC.

Uploaded by

crash2804
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Serial Interface Adapter (with M8 connector)

AISR for FABER-COM electronic cards

MAP2/MAS2
joystick

FABER - COM

RS-232 Adapter

Ordering code: PISPR

Serial cable

DESCRIPTION

The AIS Serial Interface Adapter is the only medium to connect FABER-COM electronic devices (STU electronic
card and JS/JP/JC joysticks) to a PC for programming, calibration, firmware updating and working parameters
monitoring.

The communication between the device and PC is supported by SepSim, a Windows application (Win98/Win 2K/XP
tested). The "Lite" version of SepSim is provided freely when the device is purchased.

With this application a device configuration can be


saved to a file and downloaded into another device.

The application requires a serial port or a USB to


RS232 converter.

The program file is self-installing and the application is


extremely user friendly.

AIS is provided with a 1,80 m long serial cable (DB9


male/female).

On the right is showed the main page of SepSim.

FABER-COM srl - Via Romana 36/1 - 42028 Poviglio (RE) - Italy Tel. +39-0522-960428 Fax. +39-0522-969644 - www.fabercom.it

Tecnico\Prodotti\Adattatore seriale\Documentazionei\SS#AISR_v101_ie.cdr - 18/11/15

You might also like