Where Do I Start?

Refer to the code tables at the end of this guide to

locate additional programming codes. What If None of the Codes 5. Enter the programming code 9 2 2 by pressing the
numeric keys on the remote. The mode key you
7. Point the remote toward the device, and press
PLAY.
Some common examples:
• To program the AUX key to operate your DVD
The channel key now always controls the device
associated with the mode you selected in this
Before you begin using your remote, complete the
following initial setup tasks.
Note: You have the option to assign some remote Work? selected in step 3 blinks twice to indicate a
successful entry.
8. Your device powers off when it finds the correct
code. Then, choose one of the following options:
player, press DVD and then AUX.
• To program the DVD key to operate your TV,
procedure, whether in STB, TV, DVD, or AUX mode.
keys to operate one device type only. For example,
you may want to assign volume control to the TV only.
If none of the codes listed for your brand of device 6. Point the remote toward the device, and press • Save code and exit – Press the ENTER key on
press TV and then DVD. Controlling Channels for Different
Install the Batteries operate the device correctly, or if your device is not PLAY.
Devices (Program Code 966)
Change Volume Control
If this is the case, you can reprogram power, volume, the remote to program the code in the remote and
listed in the codes table, you can use the Auto-Search
The remote requires two AA batteries (alkaline and channel control using procedures found later in 7. Your device powers off when it finds the correct the mode key flashes three times indicating
function to search through the code library for a valid 1. Complete steps 1 through 4 of the Controlling
TV POWER DVD recommended). A diagram in the battery compartment this guide. code. Then, choose one of the following options: successful entry. By default, once the TV mode key is programmed with
STB AUX
code. This section provides procedures for using the Channels for One Device procedure.
of the remote indicates proper placement of the • Save code and exit – Press the ENTER key on • Step forward – Press the fast-forward (FF) key a valid code, the volume and mute buttons control
Auto-Search function to search the code library for 2. Press and release the Enter key. The STB mode
RE
CORD
REW FF

/VIDEO
batteries. When batteries are properly installed, the Assigning a Device Code to a Mode Key TV, DVD and AUX mode codes. the remote to program the code in the remote and on the remote to step ahead through the codes your TV. These keys adjust the volume of your TV key blinks three times to indicate a successful
TV
light on the remote blinks each time a key is the mode key flashes three times indicating one at a time. Then, return to step 7. higher, lower, or temporarily switch the volume off
STOP PAUSE PLAY 1. Refer to the code tables at the end of this guide to entry.
pressed. Note: Read the procedures in this section thoroughly successful entry. (Mute), regardless of whether the remote is in STB,
locate the information for the device you want to • Step backward – Press the rewind (REW) key on
before beginning. You need to be prepared to TV, DVD, or AUX mode. After you press the Enter key, the channel key now
• Step forward – Press the fast-forward (FF) key the remote to step back through the codes one at
ACK SKIP
program.
Visit the Quick Reference Section controls the device associated with the mode key you
B

observe the behavior of the remote. on the remote to step ahead through the codes a time. Then, return to step 7.
Note: If your device is not listed, you may be able to If you prefer, you can choose to have the volume and select. For example, in TV mode, the channel key
VOD
Use the Quick Reference section of this guide to program the remote using the Auto-Search function. one at a time. Then, return to step 6. • Exit without saving the code – Press the EXIT mute buttons always control a different device rather controls the TV, but in STB mode, the channel key
PHONE

RD
CO IN
MENU
MENU
ONIDEMAND

LIVE TV
familiarize yourself with the remote and the functions Go to What If None of the Codes Work for Auto-Search Features • Step backward – Press the rewind (REW) key on key on the remote. The selected mode key than your TV, such as a home theater receiver. (See controls the set-top.
of its various keys. Knowing the function and location instructions. Consider the following items when using Auto- the remote to step back through the codes one at flashes three times and returns to normal
GS

Controlling Volume for One Device below.) Note

RE

DVR

of the keys on the remote will assist you when you are Search: a time. Then, return to step 6. operation. that you must first program one of the mode keys, Notes:
2. Turn on the device that you want to assign to a
programming the remote. such as AUX, with a valid code for that device. • If any other key is pressed except the Mode keys
mode key. • The Auto-Search function begins searching from • Exit without saving the code – Press the EXIT • Send the current code – Press the POWER key
key on the remote. The selected mode key on the remote to send the current code. If the and the ENTER key, the remote does not accept
3. Press and hold the appropriate mode key (TV,
EXIT INFO
Program the Remote DVD, or AUX) on the remote, and then press and
the first code.
flashes three times and returns to normal device turns back on, press the ENTER key. If the Alternatively, you can choose to have the volume and any changes or updates. The STB mode key
• If a valid code is not found, the green backlight blinks operation. device does not turn on, return to step 7. mute buttons control different devices when the displays a long red flash and the remote returns to
INTERACT
To learn how to program your remote, refer to the hold the OK key. twice and the remote returns to normal operation. remote is in different modes. For example, you might normal operation.
SEARCH MULTISCREEN sections What Devices Can I Control, What • Send the current code – Press the POWER key • Continue with auto-search function – Press the
4. Release both keys and the mode keys blink twice. • If any other key is pressed except PLAY, ENTER, want to control the volume on your TV when in TV
GUIDE Devices Do I Want to Control, and Program the on the remote to send the current code. If the PLAY key on the remote to continue with the auto- • If the remote times out before you complete
5. Enter the first 4-digit setup code for the device using POWER, EXIT, REW, FF, or numeric keys 1 through mode, but the volume on your home theater receiver
GUIDE CH Remote to Control My Devices for further device turns back on, press the ENTER key. If the search function. Then, return to step 7. programming channel selection control, the remote
when in AUX mode. (See Controlling Volume for
VOL
the numeric keys (0-9) on the remote. The mode key
PG
MUTE JUMP
instructions. 4 (when programming the AUX mode key), the device does not turn on, return to step 6. does not accept any changes. You must start over
MUTE JUMP
Different Devices below.) Note that not all devices
Reassign Mode Keys
blinks three times to indicate that the code entry was mode key displays a long red flash (error message) from step 1 of this procedure.
accepted. and the remote returns to normal operation. • Continue with auto-search function – Press the have volume controls, so if you choose this option, the
1 2 3 Find a Place to Store Your Remote PLAY key on the remote to continue with the auto- volume and mute buttons may do nothing in some
4
ABC

5
DEF

6
Keeping up with one remote is much easier than
Notes:
• When an invalid code is entered, the selected
• Should the remote time-out before you complete the
Auto-Search function you must start over. This is
search function. Then, return to step 6. You can reassign a mode key to operate a different
device. For example, you can reassign the AUX key
modes, such as STB and DVD. Change Power Control
keeping up with four or five remotes. However, it is still
indicated by one long flash of the red LED. Auto-Searching the Code Library for The POWER key on the remote is set by default to
GHI JKL MNO

mode key displays a long flash to indicate that to operate a DVD player or a TV. If you reassign a
7 8 9 a good idea to find a storage location for your remote.
you have not entered the code correctly. key, be sure you update the table found in this guide. Controlling Volume for One Device control the power switch on one device at a time, in
PQRS TUV WXYZ
The AT6400 is not a toy. It should be kept out of the • If the device is not listed and the Auto-Search function
is unable to find a usable code, you may need to use
AUX Mode Codes (Program Code 922) (Program Code 955) either mode (STB, TV, DVD, or AUX). When in STB
0 #
reach of children under the age of 6 years. • Should the remote time-out before you complete
CLEAR SPACE ENTER
the code setup, you must start over. This is the original remote provided with the device. 1. Turn on the device that you want to assign to the
AUX key.
Reassigning Mode Keys 1. Press and hold the STB mode key on the remote.
mode, the remote switches the set-top from OFF
(standby mode) to ON, or from ON to OFF (standby
Program the Remote to indicated by one long flash of the red LED.
Auto-Searching the Code Library for 2. Point the remote at the device.
(Program Code 944) 2. Without releasing the STB key, press and hold the mode). However, you can alternatively program the
6. Point the remote at the device, and press POWER 1. Press and hold the STB mode key on the remote. OK key. POWER key to control the power switch on up to four
TV or DVD Mode Codes
Control My Devices to test the device.
7. Did the device power off? (Program Code 922)
3. Press and while holding the AUX key, press the OK
key. 2. Without releasing the STB key, press and hold the 3. Release both keys and all mode keys blink twice. devices at the same time, instead of controlling one
device at a time. It is highly recommended that you
OK key. 4. Enter the programming code 9 5 5 by pressing the
Your remote is initially programmed to only operate • If yes, write this code number in the table found 4. Release both the AUX key and the OK key and all set up the POWER key to turn on and off your set-top
Note: This procedure only applies to TVs and DVDs. 3. Release both the keys and all mode keys flash number keys on the remote. The STB mode key
your set-top. You will need to set up the remote to in this guide. You may need it again if the device the mode keys blink twice. and your TV at the same time. Turning off the set-top
blinks twice indicating a successful entry.

AT6400 AllTouch
operate your other devices using its TV, DVD, and 1. Turn on the device you that you want to assign to the twice. saves electricity and extends the life of the box. When
code is accidentally erased. 5. Enter the programming code 9 2 2 by pressing the
AUX modes. The TV key may be programmed to 4. Enter the programming code 9 4 4 by pressing the 5. Press and release the mode key for the device you
• If no, repeat this procedure from step 3 using a TV or DVD key. numeric keys on the remote. The AUX key blinks turned off, the set-top can still record scheduled
operate a standard or high-definition television numeric keys on the remote. The STB mode key want the volume keys to control. For example, if you
programs on its DVR and perform any other

IR Universal
different setup code. 2. Point the remote at the device. twice indicating a successful entry.
(HDTV). The DVD key may be programmed to blinks twice indicating a successful entry. want to control volume through your TV, press and
6. Press the PLAY key, choose one of the following necessary functions.
operate a DVD player. The AUX key may be Note: If none of the codes listed for your brand of 3. Press and while holding a selected mode key (TV or release TV. The selected mode key blinks three
device categories and then, using the number keys 5. Press and release the mode key associated with the

Remote Control
device operate the device correctly, go to What If DVD), press the OK key. For example, to search for times to indicate a successful entry.
programmed to operate a VCR, a receiver, an
amplifier, or a Home Theater in a Box (HTIB) None of the Codes Work for instructions. a TV code, press and hold TV and OK at the same on the remote, press its assigned number (1 – 4) type of device you want to control, and then press
The volume keys now control only one device
Controlling Power for Multiple
and release the mode key that you want to change.
system. If the remote provides only limited 8. Repeat this procedure for each mode key you want time. based on the following list:
The newly assigned mode key blinks one time whether you are in STB, TV, DVD, or AUX mode. Devices at Once (Program Code 977)
functionality for a device, you can look for a code to program. 4. Release both keys and all the mode keys blink 1 = VCRs 2 = Receiver/Tuners
1. Press and hold the STB mode key on the remote.
User Guide 3 = Amplifiers 4 = HTIB indicating a successful entry.
that provides more functionality. twice.
Note: The device categories are number-coded to
Controlling Volume for Different 2. Without releasing the STB key, press and hold the
provide a more direct programming method. Devices (Program Code 955) OK key.
1. Complete steps 1 through 4 of the Controlling 3. Release both keys and all mode keys blink twice.
Volume for One Device procedure. 4. Enter the programming code 9 7 7 by pressing the

Welcome to the Ultimate Quick Reference Device Control Viewing and Browsing Control Sound Control LED Indicators
2. Press and release the Enter key. The STB mode
key blinks three times to indicate a successful entry.
numeric keys on the remote. The STB mode key
blinks twice to indicate a successful entry.

Control Experience POWER

Turns devices on or off Accesses the phone menu
Note: These keys are assigned to the TV when the There are red LEDs underneath each of the four
mode keys (STB, TV, DVD, and AUX) that flash
After you press the Enter key, the volume keys control
the device assigned to that mode. For example, in TV
5. For the first device, press the STB key. The STB
mode key blinks twice.
Your new AT6400 AllTouch ® Infrared (IR) TV mode key is programmed with a valid code.
STB
Phone
each time a key is pressed to show which device mode, the volume keys control volume for the TV only. 6. For the second device, press the applicable mode
Universal Remote Control (remote) is a true the key is currently controlling. key (TV, DVD, or AUX). The selected mode key
universal remote, functioning as four remotes in
TV POWER DVD
Device Enables set-top mode functions Accesses the Interactive Program Guide Notes:
STB AUX
MENU VOL Adjusts volume blinks twice.
one. As one example, you can use this remote to Control (IPG) There are also green LEDs that illuminate several • If any other key is pressed except the Mode keys and
REW FF TV 7. Repeat step 6 for up to two more devices (total of
operate your set-top, your TV, and two other RE
CORD
TV/
VIDEO
Enables TV mode functions keys whenever the remote is in use. They stay the ENTER key, the remote does not accept any
devices, such as a DVD player and VCR. PAUSE DVR/VOD/ MUTE
Mutes sound illuminated for a short time after a key is pressed.
four devices).
STOP PLAY

DVD/VCR
VOD
Accesses the On Demand menu changes or updates. The STB mode key displays a
DVD ON
IDE MAN D 8. Press the ENTER key to complete the power switch
Control long red flash and the remote returns to normal
ACK SKIP
Enables DVD mode functions During programming, if the remote times out before control programming. The last selected mode key
Important Information Numeric Keys operation.
B

ORDING
EC
Accesses the DVR list of recordings you complete the code setup, you will need to start blinks 3 times to indicate a successful entry.
S
R

VOD AUX DVR

over. This is indicated by one long flash of the red • If the remote times out before you complete
About Your Remote MENU Enables AUX mode functions programming volume control, the remote does not
Example: In an example scenario where you press
ONIDEMAND
Enters channel numbers, text, and
PHONE 1 2 3

LIVEITV
ABC DEF

LED.
RD
CO IN
MENU
LIVE TV Viewing Views live TV
4
GHI
5
JKL
6
MNO
remote codes. Also use to enter your accept any changes. You must start over from step
only TV in steps 6 and 7, the POWER key controls
GS
RE

and both the set-top and the TV at the same time,

DVR 7 8 9

Your remote is initially programmed to only operate parental control PIN 1 of this procedure.
What Devices Do I Want to
PQRS TUV WXYZ

Browsing DVR, VOD, DVD, VCR Control regardless of which mode the remote is in (STB, TV,
0

your set-top. Therefore, you must program the

SPACE

Control Moves through selections DVD, or AUX).

remote to operate your TV, VCR, or other devices.
See Program the Remote to Control My EXIT INFO
Notes:
• In STB mode, these keys control DVR and VOD
Clears text and numbers in text fields
Control? Change Channel Control
Controlling Power for One Device
CLEAR

Devices to learn how to enter device codes and INTERACT

functions. Selects and deselects screen items The remote is set by default to control channel
To help you keep track of the devices you want to
program your remote. SEARCH MULTISCREEN
• In DVD and AUX modes, these keys may control # Enters and saves (stores) an entry control, list the type of devices you have (including
selection on the set-top. You can also program at a Time (Program Code 977)
Sound GUIDE
your DVD or VCR depending on how you have
ENTER
channel control to control any of the TV, DVD, or AUX
Note: You must use the IR remote within line of
EXIT
Clears all menu screens and returns to brand) in the following table. Then, use the code tables mode devices provided the device allows for channel 1. Complete steps 1 through 4 of the Controlling
Control
GUIDE
programmed the remote.
What Devices Can I Control?
CH

sight of the set-top to operate the set-top

VOL
MUTE JUMP
PG
broadcast TV at the end of this guide to locate the codes for your control assignment. Or, you can set the channel Power for Multiple Devices at Once procedure.
correctly.
MUTE JUMP
CORD
device. For example, look under TV Group if you selection control programming to control channels (or 2. Press the ENTER key to complete the power switch
RE
Records the selected program The four mode keys arched across the top of the need to program the remote to operate your TV. If you page up or down) for all of the devices programmed control programming. The last selected mode key
1 2 3 Accesses the Search menu have two devices that use the same key, you must
remote tell the remote which device you want to
How Does A Universal in the four mode keys. Otherwise, you can only blinks 3 times to indicate a successful entry.
ABC DEF SEARCH
4 5 6 Numeric STOP operate. reassign the TV, DVD, or the AUX key. The STB key control channels (or page up or down) on a specific
Stops DVD, VCR, VOD, or DVR content After you select a mode, the POWER key controls the
Keys Accesses INTERACT content cannot be reassigned. Go to Reassign Mode Keys.
Remote Control Work?
GHI JKL MNO
INTERACT
7 8 9
device, for example, the TV or DVD. device assigned to that mode. For example, in TV
(Internet and interactive content) Otherwise, go to Program the Remote to Control
PQRS TUV WXYZ PAUSE
POWER
mode, the remote controls power for the TV only.
Pauses DVD, VCR, VOD, or DVR content
TV DVD My Devices for additional instructions. Note: The channel control keys include CH/Page,
You tell the remote which type of device you want Clear 0 #
Enter STB AUX
Jump, and the numeric keys 0 through 9.
CLEAR SPACE ENTER
Notes:
to operate using the four keys arched across the Turns MultiScreen mode on or off
top of the remote. These keys, known as mode
PLAY MULTISCREEN • If any other key is pressed except the Mode keys
Plays DVD, VCR, VOD, or DVR content Mode Device Controlling Channels for One Device and the ENTER key, the remote does not accept
keys, are labeled STB, TV, DVD, and AUX. T12121
Key Type Brand Code
Displays text information about the selected any changes or updates. The STB mode key
(Program Code 966)
INFO
Each mode key is associated with a specific Each mode key is associated with different types of
device. As an example, after programming the T13264 /VIDEO Scrolls through available TV or video input program displays a long red flash and the remote returns to
TV devices. You can use each mode key to control one Example:
remote, if you want the remote to operate your sources of its associated devices: DVD DVD Sony 2066 1. Press and hold the STB mode key on the remote. normal operation.
2. Without releasing the STB key, press and hold the • If the remote times out before you complete
TV, you simply press the TV key. Other keys you GUIDE Displays or closes the IPG
Mode Key Associated Devices OK key. programming power switch control, the remote does
press on the remote, thereafter, should operate REW FF
Rewinds or fast forwards through TV
your TV. Want to switch the remote to operate a STB IP gateway set-top 3. Release both keys and all mode keys blink twice. not accept any changes. You must start over from
DVR or VOD content Jumps to next section or switches to last
different device? Just press the mode key for the 4. Enter the programming code 9 6 6 by pressing the step 1 of this procedure.
JUMP
channel viewed TV* TVs (including HDTVs)
next device you want to operate. In this guide, you DVD numeric keys on the remote. The STB mode key
will learn which types of devices you can control BACK SKIP
Skips backward or forward through DVD* DVD players blinks twice to indicate a successful entry.
and how to program the remote to control your DVR or VOD content Selects the next channel, up or down, when AUX* VCRs, receivers, tuners, and Home 5. Press and release the mode key for the device you
specific devices. CH
watching TV. Moves up or down one page AUX want the channel key to control. For example, if you
PG
Theater in a Box (HTIB)
in the IPG and in some menu screens want to control channels on your TV, press and
* These keys can be reassigned to control different release TV. The selected mode key blinks three
devices. Go to the Reassign Mode Keys section of times to indicate a successful entry.
this guide for instructions.
Put It Back the Way I Got It TV, continued TV, continued DVD, continued Amplifier, continued VCR, continued VCR, continued TV/DVD/Tuner Combo
Dynatech 1004 Sylvania 1004, 1007, 1018, 1027, 1153, 1056, 1057, 1059, 1060, CyberHome 2083, 2325 Panasonic 6001, 6040 Canon 3016 Teknika 3016, 3021, 3050 TV DVD Tuner
You can return all advanced functions back to their Electroband 1002 1124, 1150, 1145, 1279, 1296, 1387, 1464 Cytron 2374 Parasound 6059 Carver 3036 Thomas 3211
Audiovox 1455 2373 5152
original settings by resetting the remote to factory Electrohome 1002, 1003, 1004,1018, 1021 Symphonic 1024, 1031, 1036, 1105, 1280, 1384 Daewoo 2058, 2062, 2137, 2138, 2190 Philips 6047 CineVision 3242 Toshiba 3011, 3029, 3030, 3038, 3096, 3098, 3099, 3102, 3103,
default settings. Resetting the remote to factory Emerson 1004, 1011, 1013, 1025, 1028, 1031, 1033, 1036, 1044, Tandy 1099 Denon 2110, 2133, 2040, 2216, 2247, 2253, 2317 Pioneer 6004, 6009, 6010, 6023, 6036, 6046, 6051 Citizen 3011, 3013, 3014 3141, 3142, 3149, 3165, 3166, 3167, 3168, 3180, 3182,

default settings removes all of the programming you 1045, 1080, 1097, 1101, 1102, 1107, 1382, 1383 Tashiko 1058 Desay 2344 Polk Audio 6047 Colortyme 3005
Touch
3185, 3210, 3219, 3220, 3223, 3227, 3241
3223
TV/DVD/VCR Combo
Envision 1004 Tatung 1003 DiamondVision 2382 Proton 6035 Curtis Mathes 3000, 3005, 3014, 3016, 3212
have entered for the remote. You must reprogram the Fisher 1043, 1045, 1047, 1103 Technics 1049 Disney 2321 Quasar 6001 CyberPower 3223
Vector Research 3005, 3006, 3011 TV DVD VCR
remote to restore your original settings. Fujitsu 1044, 1029 Techwood 1004, 1049 Durabrand 2326 RCA 6025, 6046 Daewoo 3011, 3013, 3021, 3076, 3120, 3150
Victor 3006
Magnavox 1339 2241 3183
Funai 1036, 1044, 1384 Teknika 1001, 1004, 1005, 1007, 1111, 1012, 1015, 1036, 1044, Video Concepts 3005, 3006, 3011
Eclipse 2335 Sharp 6029, 6030, 6031, 6032 DBX 3005, 3006 Panasonic 1123, 1152 2075, 2076 3087, 3086
Resetting the Remote to Factory Futuretec
Gateway
1036
1038 Tera
1060, 1073, 1096, 1097
1004, 1011
Emerson 2002, 2059, 2073, 2321, 2327, 2392 Sherwood 6011 Dell 3223
Viewsonic
Voodoo
3223
3223
RCA 1151 2077 3106
ESA 2327, 2394 Shure 6048 Dimensia 3000 Samsung 1297 2214 3148
Default Settings (Program Code 900) GE 1000, 1003, 1004, 1008, 1021, 1048, 1049, 1063, 1068, Thomas 1384
Fisher 2112, 2134, 2255 Sony 6020, 6042, 6044, 6049 Dynatech 3021
Wards 3001, 3011, 3016, 3021, 3023, 3047, 3052
Sharp 1153, 1378 2086, 2292 3100, 3200
1094, 1144, 1164, 1224, 1367, 1380, 1381, 1385, 1386 TMK 1004 Westinghouse 3002
1. Press and hold the STB mode key on the remote. Gibralter 1160
Funai 2002, 2321, 2327 Soundesign 6045 Electrohome 3023
XR-1000 3016, 3021
Sylvania 1027, 1124, 2064, 2078, 3105, 3088,
Toshiba 1006, 1045, 1058, 1073, 1175, 1079, 1093, 1116, 1154, Gateway 2346 Teac 6019 Emerson 3003, 3011, 3016, 3021, 3023, 3038, 3083, 3202 1296 2213 3147
2. Without releasing the STB key, press and hold the Goldstar 1004, 1005, 1011, 1018, 1050, 1090, 1091, 1097, 1098, 1158, 1159, 1252, 1267, 1281, 1282, 1283, 1284, 1286,
GE 2079, 2118, 2041, 2261, 2272, 2319, 2322 Technic 6001 Expressvu 3247
Yamaha 3005, 3006, 3007, 3014, 3055 Toshiba 1154, 1158, 2093, 2094 3099, 3098,
1400, 1401 1293, 1294, 1313, 1315, 1319, 1338, 1364, 1377
OK key. Go Video 2046, 2127, 2129, 2124, 2230, 2239, 2249, 2346 Technics 6001, 6040 Fisher 3007, 3029, 3030
Zenith 3048, 3051, 3058, 3064, 3072, 3097, 3119, 3143, 3144, 1338 3149
Grunpy 1036, 1044 Totevision 1097 3186, 3196, 3198, 3202, 3204, 3211, 3213
3. Release both keys and all mode keys blink twice. Hallmark 1004 Universal 1048, 1063
GPX 2114, 2390 Toshiba 6027 Fuji 3016, 3058
ZT Group 3223
4. Enter the programming code 9 0 0 by pressing the Harley Davidson 1384 Victor 1055
Greenhill 2322 Victor 6024 Funai 3002, 3021 TV/VCR/Tuner Combo
Grundig 2320 Wards 6045 Garrard 3021
numeric keys on the remote. The STB mode key Harvard 1036 Vidtech
Viking
1004, 1005
1100
Harman Kardon 2125 Yamaha 6007, 6037, 6038, 6043, 6052, 6053 Gateway 3223 Combination Device Codes TV VCR Tuner
Hisense 1112
blinks four times to indicate you have successfully Hitachi 1004, 1011, 1012, 1051, 1052, 1084, 1085, 1086, 1087, Wards 1000, 1001, 1004, 1005, 1118, 1031, 1044, 1048, 1053,
Hitachi 2000, 2027, 2126, 2173, 2240 GE 3000, 3016, 3059, 3090, 3201, 3203, 3212 Panasonic 1303, 1304 3155, 3156, 5109, 5110,
reset the remote to factory default settings. 1102, 1225, 1384 1056, 1057, 1059, 1060, 1063, 1064 Ilo 2375 Go Video 3066, 3073, 3109, 3110, 3188, 3193, 3221
If you have a combination device, you may need to
3157 5111
HP 1408 Westinghouse 1013 Initial 2322, 2381 Home Theater in a Box (HTIB) GOI 3247 Philips 1309 3161 5112
Notes: reassign the AUX key to operate one of the devices,
• If any other key is pressed except the numeric
Ilo 1457 Yamaha 1004, 1005, 1018 Insignia 2327, 2369, 2394
Audio DVD Goldstar 3005, 3014
for example, the VCR. The following tables provide
keys, the remote does not accept any changes or
IMA 1036 Zenith 1001, 1089, 1118, 1125, 1161, 1287, 1357, 1382, 1383,
1384
Irradio
JVC
2149, 2150
2017, 2028, 2047, 2090, 2096, 2097, 2115, 2166, 2204, Apex 4049 2316
Gradiente
Harley Davidson
3021
3021 some examples of combination devices. If your
TV/DVD/VCR/Tuner Combo
updates. The STB mode key displays a long red
Infinity
Janeil
1053
1100
2206, 2217, 2218, 2232, 2242, 2265, 2277, 2283, 2359, Audiovox 4053 2388 Harman Kardon 3005 combination device is not listed, simply look for the TV DVD VCR Tuner
2360, 2361, 2362, 2364, 2365, 2366, 2367
flash and the remote returns to normal operation. JBL 1053 HDTV Kenwood 2142, 2148
Bose
Cambridge
4000
4060
2130, 2215
2395
Headquarter 3007 codes for each separate device. Panasonic 1292,1295 2211, 2212 3145, 3146 5107, 5108
JC Penney 1000, 1004, 1005, 1007, 1012, 1021, 1048, 1049, 1058, Hewlett Packard 3223
• If the remote times out before you complete the 1063, 1068, 1072, 1073, 1075, 1097, 1098
Acer 1041, 1192 KLH 2322 Sound Works
Hitachi 3052, 3055, 3059, 3117, 3169
factory default reset procedure, the remote does JCB 1002
Akai 1427, 1432 Konka 2029, 2030, 2376 Classic 4055 2391
HNS 3243 DVD/VCR Combo
not accept any changes. You must start over from
step 1 of this procedure.
Jensen
JVC
1004, 1232, 1285, 1314, 1376
1011, 1012, 1026, 1049, 1052, 1054, 1055, 1080, 1092,
Apex
Astar
1088
1434
Koss
Lasonic
2060, 2200
2081
Coby
Curtis
4052
4056
2387
2387
HP
HTS
3223
3247
DVD VCR Device Program Codes
Audiovox 1455 Lenoxx 2326 Denon 4012 2216
1117, 1131, 1235, 1288, 1299 Hughes 3246, 3250 Apex 2229 3189 If you program codes to control devices, record your
Axion 1459 LG 2297, 2303, 2339, 2352, 2363, 2368, 2371 Emerson 4057 2392 Broksonic 2072 3082
Kawasho 1002, 1004 codes here for easy reference:
Troubleshooting
Humax 3246
Kenwood 1004, 1018 Benq 1136 Liteon 2346, 2353 GPX 4055 2390 CineVision 2230 3242
Hush 3223
Kloss Novabeam 1036, 1056, 1057, 1100 Coby 1460 Magnavox 2002, 2018, 2033, 2089, 2237, 2241, 2245, 2259, 2270, Insignia 4059 2394 Daewoo 2062 3076
Insignia 3239
2293, 2318, 2320, 2321, 2327
If there is no response when you press the keys on KTV 1036, 1097, 1101 Daewoo 1135 JBL 4001 2043 Emerson 2073 3083
Marantz 2143, 2320
Instant Replay 3016
Mode Device
the remote, please check the following items before LG 1005, 1396, 1397, 1398, 1399, 1402, 1403, 1404, 1405 Dell 1141, 1142, 1146, 1394, 1395, 1409
Memorex 2003
JVC 4002, 4013, 4014, 4028 2035, 2217, 2218, 2283
JC Penney 3005, 3006, 3007, 3016, 3030, 3036, 3052 Go Video 2046, 2127, 2129, 2230, 3066, 3110, 3109, 3188,
Key Type Brand Code
Element 1431 Koss 4003, 4015 2060, 2200 2239, 2129 3193, 3221
calling for service. Lloyd’s 1384
Mintek 2004, 2322, 2381
JCL 3016
Loewe 1053 Emerson 1468 LG 4041 2303 Hitachi 2126, 2173 3117, 3169
Jensen 3055
Example:
DVD Sony 2066
Emprex 1438 Mitsubishi 2019, 2123, 2145, 2147 Magnavox 4035 2293 Insignia 2369 3239
Logik 1001
Check the Batteries
JVC 3005, 3006, 3007, 3014, 3055, 3060, 3067, 3118, 3121,
Luxman 1004 Epson 1422, 1451 NAD 2059, 2139 Onkyo 4004, 4016, 4017 2024, 2219, 2220 3122, 3123, 3124, 3125, 3126, 3127, 3151, 3170, 3171, JVC 2047, 2097, 2166, 2232, 3067, 3118, 3170, 3194, DVD
Fujitsu 1029 Nakamichi 2116 Panasonic 4005, 4018, 4030, 4038, 2104, 2221, 2300, 2384, 3194, 3205, 3228, 3229, 3230, 3231, 3234, 3235, 3236, 2166, 2359, 2360, 2361, 3171, 3228, 3229, 3230,
• Are the batteries inserted correctly? LXI 1000, 1004, 1045, 1053, 1058, 1068, 1075
Nesa 2322 4050, 4051 2385, 2386 3237, 3247, 3248, 3250 2362, 2364, 2365, 2366, 3231, 3234, 3235, 3236,
Gateway 1038, 1449
• Check the battery condition for leakage.
Magnavox 1004, 1007, 1018, 1053, 1056, 1057, 1059, 1060, 1083,
1110, 1147, 1228, 1260, 1300, 1301, 1302, 1321, 1326, Hewlett Packard 1419, 1444, 1445, 1452 Nexxtech 2140, 2256, 2328 Philips 4006, 4019, 4027, 4039, 2036, 2222, 2282, 2304 Kenwood 3005, 3006, 3007, 3014, 3055, 3060
2367 3237 TV
4042 LG 2363, 2368 3233, 3238
1339, 1365, 1366, 1371, 1384, 1387 Hitachi 1030, 1132, 1133, 1134, 1191, 1208, 1209, 1210, 1211, Norcent 2005, 2117 Kodak 3016
• Replace with new alkaline batteries. Magnin 1380 1212, 1226, 1322, 1324, 1328, 1344, 1447 Onkyo 2006, 2219, 2220, 2318 Pioneer 4007, 4020, 4021, 4029 2016, 2223, 2224 LG 3233, 3238
Magnavox 2237 3190
RCA 4008, 4026 2042, 2281, 2161 Panasonic 2066, 2167, 2228 3078, 3172, 3191
Majestic 1001 HP 1419, 1445, 1452 Oppo 2323 Linksys 3223
DVD
Check the Device Marantz 1004, 1051, 1053 Ilo 1412, 1435, 1436 Oritron 2009 Samsung
Sanyo
4033, 4036, 4047
4058
2294, 2299, 2295, 2314
2393
Lloyd’s 3021
Philips
Polaroid
2051, 2169
2007
3071, 3173
3111
Media Center 1408 InFocus 1450 Panasonic 2031, 2066, 2075, 2076, 2104, 2105, 2106, 2111, 2167, Magnavox 3016, 3036, 3037, 3051, 3061, 3128, 3152, 3153, 3154,
• Is the device’s power cord connected to the power Megatron 1004, 1051 Initial 1457 2179, 2188, 2198, 2207, 2211, 2212, 2221, 2228, 2248, Sharp 4061 2396 3181, 3183, 3190, 3206, 3211 RCA 2048, 2165, 2172 3068, 3174, 3175
outlet? Memorex 1001, 1004, 1005, 1022, 1045 Insignia 1437
2151, 2153, 2154, 2155, 2258, 2268, 2300, 2318, 2384,
2385, 2386, 2398, 2399
Sherwood 4062 2397 Magnin 3201 Samsung 2049, 2074, 2085, 2233,
2290, 2311
3069, 3084, 3101, 3184,
3214, 3218, 3232
AUX
MGA 1004, 1005, 1018, 1021, 1047, 1061, 1062, 1380 JVC 1130, 1131, 1227 Sony 4009, 4010, 4022, 4023, 2113, 2108, 2225, 2226, Marantz 3005, 3006, 3007, 3014, 3016, 3036
• Is the device switched on? Philips 2018, 2032, 2033, 2045, 2051, 2091, 2109, 2156, 2157, 4024, 4031, 4032, 4034, 2278, 2288, 2296, 2305, Matsushita 3016
Sanyo 2050 3070
Midland 1049, 1068, 1097, 1098, 1160 LG 1343, 1346, 1396 2158, 2159, 2169, 2208, 2209, 2222, 2243, 2259, 2260, 4043, 4044, 4045, 4046, 2306, 2307, 2315 Sharp 2170, 2174 3176, 3177
Media Center PC 3223
Check the IR Database Codes List Minutz
Mitsubishi
1048
1004, 1005, 1018, 1021, 1047, 1061, 1062, 1081, 1381
Magnavox
Maxent
1329, 1358, 1372, 1414
1424 Pioneer
2264, 2282, 2285, 2302, 2304, 2318, 2320, 2321, 2404
2008, 2021, 2160, 2164, 2191, 2223, 2224, 2267, 2310, Toshiba
4048
4025, 4040 2227
MEI 3016
Sony 2065, 2067, 2171, 2238,
2244, 2067, 2355, 2356,
3104, 3085, 3179, 3187,
3192, 3178, 3224, 3225,
Memorex 3001, 3004, 3007, 3016, 3021, 3051
Is the device brand name for the device listed in the Montgomery Ward 1001 Mintek 1457 2337, 2400
Venturer 4011 2011 2357 3226, 3240
Polaroid 2007, 2377, 2409 MGA 3023, 3038, 3201
code list?
FCC Compliance
Motorola 1003, 1099 Mitsubishi 1032, 1213, 1229, 1230, 1448 Yamaha 4054 2389 Toshiba 2080, 2084, 2168, 2235, 3103, 3102, 3180, 3185,
MTC 1004, 1005, 1073 NEC 1193, 1423 Polk Audio 2320 Mind 3223 2312, 2358 3219, 3227, 3241
Zenith 4037 Minolta 3052
• If yes and there is more than one code listed, try Multitech 1036 NET-TV 1040 Presidian 2321 Zenith, 2052, 2128, 2234, 2236 3072, 3119, 3186, 3186
Mitsubishi 3023, 3038, 3039, 3060, 3108, 3203
using a different code to provide more functionality. NAD
NEC
1004, 1058, 1075, 1085
1003, 1004, 1005
Olevia
Panasonic
1406, 1418, 1421, 1462
1140, 1169, 1170, 1194, 1233, 1234, 1331, 1336, 1410,
Proscan
Qwestar
2010, 2118, 2144, 2205, 2319
2009 Receiver/Tuner Montgomery Ward 3001 United States FCC Compliance
• If no, try the following: Net-TV 1040 1417, 1442, 1466 RCA 2010, 2048, 2055, 2063, 2077, 2099, 2107, 2118, 2161, ADC 5144 Motorola 3001, 3016 TV/DVD Combo This device has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
– Use the Auto-Search function to find a usable code. Olevia 1420 Philips 1126, 1129, 1236, 1237, 1239, 1261, 1334, 1351, 1390,
1411
2165, 2172, 2177, 2181, 2261, 2275, 2281, 2287, 2289,
2319, 2322, 2331
Aiwa 5000, 5001, 5002, 5004, 5005, 5006, 5034, 5143 Multitech
NEC
3021
3005, 3006, 3007, 3014, 3055, 3060
TV DVD reasonable protection against such interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy. If not installed
Nikko 1004, 1015 Akai 5083
– If the Auto-Search function is unable to find a Norcent 1217, 1320
Pioneer 1035, 1195, 1240, 1335, 1469, 1470 Sampo 2119
Audiotronic 5145 Niveus Media 3223 Akai 1427 2378 and used in accordance with the instructions, it may cause harmful interference to
Samsung 2012, 2049, 2074, 2085, 2102, 2175, 2186, 2196, 2214, radio communications. However, there is no guarantee that interference will not
usable code, you may need to use the original NTC 1015
Polaroid 1262, 1391, 1392, 1393, 1396, 1431, 1440
Audiovox 5152 Northgate 3223 Apex 1163 2095
occur in a particular installation. If this equipment does cause harmful interference
Proscan 1000 2233, 2246, 2274, 2279, 2286, 2290, 2294, 2295, 2299, Axion 1459 2379
remote provided with the device. Onwa 1036 2311, 2314, 2333, 2340, 2347, 2351 Bang & Olufsen 5151 Olympus 3016 to radio or television reception, which can be determined by turning the equipment
Protron 1430 Optimus 3001 Bang & Olufsen 1453 2370 OFF and ON, the user is encouraged to try to correct the interference by one or
Optimus 1085 Sansui 2071 Bose 5007 more of the following measures:

Code Tables
Proview 1407 Optonica 3047 Broksonic 1114 2053
Optonica 1064, 1099 Sanyo 2034, 2050, 2120, 2393 Capetronic 5144 • Reorient or relocate the receiving antenna, if applicable.
RCA 1143, 1196, 1241, 1242 Orion 3004, 3202, 3213 Coby 1460 2380
Orion 1023, 1033, 110, 1382, 1383 Sensory Science 2345 Carver 5000, 5143 ,5145 • Increase the separation between the equipment and receiver.
Sampo 1038, 1243 Panasonic 3016, 3053, 3062, 3063, 3077, 3078, 3079, 3086, 3087, Cytron 1456 2374 • Connect the equipment into an outlet on a circuit different from that to which
Panasonic 1003, 1010, 1049, 1053, 1096, 1123, 1152, 1231, 1289, Sharp 2013, 2015, 2044, 2082, 2086, 2170, 2174, 2292, 2321, Denon 5008, 5035, 5036, 5037, 5038, 5039, 5040, 5041, 5042,
If the remote does not recognize your device, you can 1292, 1295, 1303, 1304, 1305, 1306, 1385 Samsung 1019, 1171, 1172, 1173, 1174, 1175, 1197, 1198, 1199,
2396 5043, 5044, 5045, 5046, 5047, 5048, 5049, 5050, 5051, 3107, 3129, 3130, 3131, 3132, 3133, 3134, 3145, 3146, DiamondVision 1461 2382 the receiver is connected.
find codes for your device by brand name. Code tables Penney 1380, 1385
1200, 1245, 1246, 1325, 1327, 1352, 1354, 1443
Sherwood 2121, 2397 5052, 5053, 5054, 5114, 5124 3155, 3156, 3157, 3158, 3159, 3172, 3191, 3197, 3207, Hitachi 1226 2240 • Consult the cable company or an experienced radio/television technician for
Sceptre 1467 3212, 3253 help.
in this section are organized by the devices assigned Philco 1003, 1004, 1005, 1007, 1011, 1018, 1053, 1056, 1057, Sony 2014, 2020, 2022, 2065, 2067, 2068, 2069, 2070, 2087, Eclipse 5149
Penney 3201, 3212
Ilo 1457 2375
Any changes or modifications not expressly approved by &LVFR6\VWHPV Inc.,
Scott 1428
to each mode (TV, DVD, and AUX). 1059 2103, 2108, 2113, 2162, 2171, 2176, 2178, 2182, 2187, Gradiente 5153
Pentax 3052, 3059
Initial 1457 2381 could void the user’s authority to operate the equipment.
Philips 1003, 1004, 1007, 1011, 1017, 1018, 1053, 1056, 1057, Sharp 1138, 1176, 1177, 1214, 1244, 1247, 1248, 1348, 1350, 2189, 2192, 2193, 2201, 2202, 2203, 2226, 2238, 2244, Harman Kardon 5000, 5009, 5055, 5056, 5142, 5143 JVC 1288 2206 The information shown in the FCC Declaration of Conformity paragraph below is
1059, 1060, 1063, 1110, 1126, 1129, 1148, 1155, 1238, 1415, 1416 2251, 2257, 2273, 2278, 2280, 2288, 2296, 2298, 2305, Pentex Research 3014
JBL 5009 LG 1255 2371 a requirement of the FCC and is intended to supply you with information regarding
TV Mode Group 1263, 1264, 1265, 1290, 1291, 1307, 1308, 1309, 1337,
1389
Sony 1037, 1128, 1137, 1178, 1215, 1216, 1218, 1219, 1220,
1221, 1250, 1251, 1316, 1318, 1330, 1347, 1413
2306, 2307, 2309, 2313, 2315, 2329, 2332, 2338, 2355,
2356, 2357, 2405, 2406, 2407
JVC 5010, 5057, 5058, 5059, 5116
Philco
Philips
3016, 3036, 3037
3016, 3036, 3047, 3061, 3071, 3135, 3160, 3161, 3173,
Mintek 1457 2381
the FCC approval of this device. The phone numbers listed are for FCC-related
questions only and not intended for questions regarding the connection or
Kenwood 5011, 5012, 5013, 5060, 5061, 5062, 5063, 5064, 5065, Panasonic 1289 2207 operation for this device. Please contact your cable service provider for any
Philips Magnavox 1260, 1264, 1265, 1266 SVA 1446 Sungale 2343 3208, 3216, 3243, 3244, 3246, 3250, 3251
TV Pilot 1097 Sylvania 1046, 1465 Sylvania 2002, 2064, 2078, 2092, 2194, 2213, 2321, 2327, 2408
Linn
5066, 5067, 5068, 5123, 5127, 5128, 5132, 5148
5000, 5143
Philips Magnavox 3135
Philips
Polaroid
1290, 1291, 1337
1458, 1440
2208, 2209, 2243
2377, 2409
questions you may have regarding the operation or installation of this device.

Abex 1098 Pioneer

Polaroid
1004, 1085, 1102
1285, 1458
Syntax
Syntax-Brillian
1418
1418
Symphonic
Techwood
2321
2141
Magnavox 5000, 5143, 5144, 5145
Pioneer
Polaroid
3006, 3060
3111
RCA 1115, 1162, 1379 2063, 2099, 2289 Declaration of Conformity
Admiral 1001, 1099 Marantz 5000, 5069, 5143, 5145 Sansui 1122 2071 This device complies with Part 15 of FCC Rules. Operation is subject to the
Portland 1004, 1005, 1015, 1097 Tatung 1426 TiVo 3074, 3244, 3245, 3246, 3249, 3250 Portland 3013
Advent 1005, 1053, 1110, 1113 Mitsubishi 5070, 5071, 5072 Sylvania 1150, 1464 2092, 2408 following two conditions: 1) the device may not cause harmful interference, and 2)
Price Club 1073 Toshiba 1127, 1179, 1203, 1204, 1222, 1223, 1332, 1340, 1341, Toshiba 2023, 2025, 2037, 2038, 2040, 2041, 2054, 2080, 2084, Proscan 3000 the device must accept any interference received, including interference that may
Adventura 1100 Onkyo 5018, 5073, 5074, 5075, 5076, 5077, 5078, 5079, 5080, Toshiba 1116, 1293, 1294, 1345 2054, 2210, 2231
Prima 1113 1345, 1353 2088, 2093, 2094, 2168, 2180, 2183, 2184, 2185, 2197, Pulsar 3051 cause undesired operation.
Aiko 1015 5081, 5082, 5084, 5085, 5086, 5087, 5130, 5131, 5140 Westinghouse 1454 2372
Trutech 1425 2210, 2227, 2231, 2235, 2259, 2271, 2276, 2284, 2301, Quarter 3007
Aiwa 1034 Prism 1049 Optimus 5144
2318, 2334, 2341
Proscan 1000, 1008, 1068, 1108 Viewsonic 1038, 1149, 1180, 1181, 1182, 1183, 1184, 1185, 1186, Quartz 3007 AllTouch IR Universal Remote Control
Akai 1002, 1427 Toshiba 2135, 2312, 2348, 2349, 2350, 2358, 2401, 2402, 2403 Panasonic 5019, 5020, 5107, 5108, 5109, 5110, 5111, 5115, 5126
Alleron 1044 Proton 1004,1011
Viore
1187, 1188, 1189, 1190, 1205, 1206, 1441
1435 Trutech 2345 Philips 5000, 5112, 5138, 5143, 5145, 5154 Quasar 3016, 3062, 3091, 3092, 3212 TV/Receiver Combo AT6400
Pulsar 1160 Radio Shack/ 3001, 3007, 3011, 3016, 3021, 3023, 3029, 3047 &LVFR6\VWHPVInc.
Amtron 1036
Pulser 1004
Vizio 1429, 1433, 1439 Urban Concepts 2318 Pioneer 5021, 5022, 5088, 5089, 5090, 5091, 5092, 5093, 5094,
5119, 5120, 5144, 5147 Realistic Brand TV Receiver 5030 Sugarloaf Parkway
Anam National 1003, 1036 Westinghouse 1454 Venturer 2011
Quasar 1003, 1039, 1049, 1096, 1165, 1166, 1385 Polaroid 5141 RCA 3000, 3003, 3016, 3040, 3041, 3042, 3052, 3059, 3062, Philips 1390 5138 Lawrenceville, Georgia 30044 USA
AOC 1004, 1005 Westinghouse 2372 3068, 3075, 3093, 3094, 3106, 3136, 3162, 3174, 3175,
Radio Shack/ 1000, 1004, 1011, 1036, 1045, 1064, 1097, 1098, 1384 Zenith 1020, 1139, 1207, 1253, 1255, 1333, 1342, 1349 Polk Audio 5143 Polaroid 1393 5141 Telephone: 
Apex 1111, 1119, 1163, 1256 Xbox 2319 3199, 3201, 3203, 3206, 3212, 3243, 3249, 3250
Realistic RCA 5024, 5025, 5026, 5137, 5144
Audiovox 1036 Yamaha 2106, 2146, 2163, 2320, 2389 ReplayTV 3252
Bang & Olufsen
Belcor
1453
1004
RCA 1000, 1003, 1004, 1005, 1008, 1018, 1049, 1065, 1066,
1067, 1068, 1069, 1070, 1071, 1082, 1102, 1104, 1106, DVD Mode Group Zenith 2039, 2052, 2128, 2199, 2234, 2236, 2252, 2308, 2318
Rotel
Samsung
5150
5139
Ricavision
Ricoh
3223
3064
TV/VCR Combo Canada EMI Regulation
1108, 1115, 1151, 1162, 1167, 1168, 1268, 1269, 1270,
Sansui 5000, 5143 Brand TV VCR This Class B digital apparatus complies with Canadian ICES-003.

AUX Mode Group

Bell & Howell 1001, 1045 1271, 1310, 1355, 1359, 1361, 1370, 1373, 1379, 1380, Runco 3051
Benq 1042 1381, 1385, 1386 DVD Sherwood 5027 Samsung 3011, 3069, 3084, 3089, 3101, 3148, 3184, 3214, 3215, Broksonic 1121, 1382, 1383 3081, 3213, 3202
Cet appareil numérique de la class B est conforme à la norme NMB-003 du
Canada.
Bradford 1036 Runco 1160 Sony 5017, 5023, 5028, 5029, 5030, 5031, 5032, 5033, 5095, 3218, 3232, 3243 20060628 FCC Standard
Aiwa 2026, 2131 Daewoo 1298 3150
5096, 5097, 5113, 5117, 5121, 5125, 5129, 5133, 5134,
Broksonic 1114, 1121, 1382, 1383 Sampo
Samsung
1004, 1097, 1098, 1120
1004, 1005, 1011, 1014, 1018, 1019, 1072, 1073, 1074,
Akai 2378 Amplifier 5136, 5146
Sanky
Sansui
3001, 3051
3004, 3006, 3055, 3060, 3202, 3211, 3213
Emerson 1382, 1383 3213, 3202
Brokwood 1004 Amphion 2342 GE 1164, 1380, 1381 3090, 3201, 3203
1097, 1098, 1156, 1161, 1297, 1323, 1360, 1363, 1364 Adcom 6055 Technics 5016, 5019, 5020, 5098, 5099, 5100, 5101, 5115, 5122,
Candle 1004, 1007, 1100 MediaWorks 5126 Sanyo 3007, 3070, 3201
JVC 1299 3151
Sansui 1023, 1107, 1122, 1273, 1382, 1383, 1384 AMW 2342 Aiwa 6003, 6020 Scott 3011, 3038
Celebrity 1002 Thorens 5145 Magnavox 1300, 1301, 1302, 1321 3152, 3153, 3154, 3181
Sanyo 1045, 1062, 1095, 1103, 1380 Apex 2001, 2056, 2057, 2061, 2095, 2098, 2229, 2250, 2316, Carver 6002 Sears 3007, 3016, 3029, 3030, 3052, 3211
Citizen 1004, 1007, 1015, 1036, 1073, 1097, 1100 Wards 5000, 5021, 5143 Magnin 1380 3201
Scotch 1004 2322, 2330 Citizen 6026 Sharp 3001, 3013, 3023, 3047, 3080, 3100, 3137, 3163, 3164,
Colortyme 1004 Yamaha 5003, 5014, 5015, 5021, 5102, 5103, 5104, 5105, 5106, MGA 1380 3201
Scott 1004, 1011, 1033, 1036, 1044 Apex Digital 2261, 2262, 2263, 2266, 2269, 2291 Curtis Mathes 6046 3176, 3177, 3200
Concerto 1004 5118, 5135 Mitsubishi 1381 3203
Sears 1000, 1004, 1012, 1018, 1044, 1045, 1047, 1055, 1058, Arrgo 2325 Denon 6014, 6039, 6057 Shintom 3048, 3058
Contec/Cony 1011, 1012, 1036 Orion 1382, 1383 3213, 3202
1068, 1075, 1076, 1103, 1105, 1384 Fisher 6002 Cisco Systems, Inc.
Craig 1036
Sharp 1004, 1009, 1011, 1025, 1064, 1077, 1078, 1097, 1099,
Astar
Audiovox
2354
2132, 2373, 2388 GE 6028, 6045
VCR Signature
Singer
3001
3016, 3064
Panasonic 1305, 1306 3158, 3159 5030 Sugarloaf Parkway
Crosley 1000, 1053 1153, 1157, 1274, 1298, 1311, 1312, 1362, 1375, 1378 Penney 1380 3201 Box 465447
Axion 2379 Goldstar 6016, 6021 ABS 3223 Sony 3048, 3049, 3058, 3085, 3104, 3138, 3139, 3140, 3178, Lawrenceville, GA 30042
Crown 1036, 1053 Shogun 1004 Philips 1307, 1308 3160, 3152
Bang & Olufsen 2324, 2370 Harman Kardon 6013, 6047 Admira 3001 3179, 3187, 3192, 3195, 3209, 3211, 3217, 3223, 3224,
CTX 1257 Signature 1001 3225, 3226, 3240, 3245 Quasar 1165, 1166 3091, 3092 678.277.1
Blaupunkt 2136, 2322 Hitachi 6034 Adventura 3021
Curtis Mathes 1000, 1004, 1014, 1045, 1073, 1097, 1385 Simpson 1007 Stack 9 3223 RCA 1167, 1168, 1310, 1380, 3093, 3094, 3162, 3201 www.FLVFRcom
Bose 2122, 2130, 2215 JBL 6050 Aiwa 3021
CXC 1036 Sony 1002, 1109, 1137, 1201, 1202, 1249, 1272, 1275, 1276, STS 3016, 3052 1381 3203 &LVFRDQGWKH&LVFRORJRDUHWUDGHPDUNVRUUHJLVWHUHGWUDGHPDUNVRI&LVFR
Boss 2336 JVC 6018, 6024, 6041 Akai 3003, 3055, 3058
Cytron 1456 1277, 1278, 1317, 1356, 1374, 1384, 1388 Sylvania 3016, 3021, 3036, 3037, 3038, 3061, 3088, 3095, 3105, Samsung 1161 3089 DQGRULWVDIILOLDWHVLQWKH86DQGRWKHUFRXQWULHV7RYLHZDOLVWRI&LVFR
Broksonic 2053, 2072, 2284 Kenwood 6015, 6022 American High 3016
Daewoo 1004, 1005, 1013, 1015, 1016, 1097, 1106 1258 ,1362, Soundesign 1004, 1007, 1036, 1044 3147 Sansui 1382, 1383 3213, 3202 WUDGHPDUNVJRWRWKLV85/ZZZFLVFRFRPJRWUDGHPDUNV
1368, 1369 Cambridge 2395 Left Coast 6047 Apex 3189
Squareview 1105 Symphonic 3002, 3021 Sanyo 1380 3201 All other trademarks shown are trademarks of their respective owners.
Daytron 1004, 1097 SoundWorks Magnavox 6035 Audio Dynamics 3005, 3006
SSS 1036 Systemax 3223 Sharp 1311, 1312 3163, 3164 7KHXVHRIWKHZRUGSDUWQHUGRHVQRWLPSO\DSDUWQHUVKLSUHODWLRQVKLSEHWZHHQ
DiamondVision 1461 Cinevision 2152, 2195 Marantz 6000, 6047, 6058 Bang & Olufsen 3222
Starlite 1036 Tandy 3007 Sylvania 1145 3095 &LVFRDQGDQ\RWKHUFRPSDQ\5
Dimensia 1000 Clarion 2100 Nakamichi 6012 Bell & Howell 3007
Supre-Macy 1100 Tatung 3055 Toshiba 1006, 1267, 1313, 1315, 3096, 3168, 3165, 3166, Product and service availability subject to change without notice.
Dumont 1160 Classic 2101, 2391 NEC 6033, 6048 Broksonic 3081, 3082, 3202, 3213
Supreme 1002 Teac 3021, 3042, 3055 1319 3167, 3182 © 2007-2008by Cisco Systems, Inc. All rights reserved.
Durabrand 1259 Coby 2380, 2387 Onkyo 6005, 6006, 6017, 6054, 6056 Candle 3011, 3013, 3014 $XJXVW
Technics 3016, 3053 Zenith 1118, 1382, 1383 3097, 3213, 3202
Curtis 2387 Optimus 6008, 6046 Remote Control Part Number 4021830 (Linux version)
User Guide Part Number 78-4019792-01Rev &