0% found this document useful (0 votes)
166 views2 pages

2-Channel Power Amplifier For High-Quality Portable Sound Systems

The document describes the D4002/D4002R 2-channel power amplifier for portable sound systems. It provides high power output and efficiency for small to medium portable systems through unique Class D design and switch mode power supply. It has extensive protections and outputs high quality sound.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
166 views2 pages

2-Channel Power Amplifier For High-Quality Portable Sound Systems

The document describes the D4002/D4002R 2-channel power amplifier for portable sound systems. It provides high power output and efficiency for small to medium portable systems through unique Class D design and switch mode power supply. It has extensive protections and outputs high quality sound.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

D4002 / D4002R

2-Channel Power Amplifier for High-Quality Portable Sound Systems

2-channel mode mono-bridged mode


▶▶ Small to medium-scale portable
systems 2Ω 4Ω 8Ω 4Ω 8Ω
▶▶ Full-range loudspeakers 2 x 2,000 W 2 x 1,100 W 2 x 650 W 1 x 4,000 W 1 x 2,200 W
EIAJ Test Standard, 1 kHz, 1% THD
▶▶ Delay lines
▶▶ Stage monitors
✓✓ Legendary Powersoft efficiency:
▶▶ Concert halls ▶▶ Unequaled Class D design with fixed switching frequency
▶▶ Live and dance clubs ▶▶ Universal switch mode power supply with PFC (Power Factor Correction)
▶▶ Space and weight saving: only one rack space (1 RU) and 9.5 kg / 20.9 lbs
▶▶ Corporate events (speech,
▶▶ Green Audio Power ® : more amplifier output power from the AC mains
background music, AV
power distribution due to >80% efficiency
presentations)
✓✓ Outstanding performance and sonic quality by design, including amp clip
limiters and patented ripple cancellation network
The D4002 is a solid workhorse in any ✓✓ Practically versatile:
environment: on the road where things ▶▶ Mono-bridgeable channel pairs

get tough or permanently installed, it ▶▶ Linking analog signal inputs per switch

provides its service dependably over ▶▶ Built-in filter network, internally selectable per channel: high/low/band pass,

many years. 12 dB/oct, 65/100/130 Hz


▶▶ Built-in gate, internally selectable per channel: off/-50 dBu
Due to unique technologies inside such ▶▶ AC inrush current limiting; channel output voltage limiting
as the switch mode power supply with ▶▶ Recessed stepped level attenuators; front LED’s for all relevant information
PFC and the distinct Class D output
stage, the D4002 is highly efficient, ✓✓ Fully protected circuit design:
▶▶ AC protection: shuts down power supply when AC mains voltage is outside
resulting in lower power consumption.
This means lower operational costs operating range
▶▶ Clip limiter: prevents severely clipped waveforms from reaching
and decreased energy draw from the
environment, in line with Green Audio loudspeakers, while still maintaining full peak power output
▶▶ DC protection: protects against infrasonic signal at the outputs
Power ® technology – typical Powersoft.
▶▶ VHF protections: protects the loudspeakers against destructive non-audible,
Performance is key, and the D Series non-musical high frequency signals
is at the forefront of uncolored sound ▶▶ Short circuit protection: protects the amplifier from short circuit or similar
reproduction – simply put, the D4002 events on the outputs; with automatic protection reset
sounds great. ▶▶ Thermal protection: mutes outputs once output devices reach 75 ºC / 167 ºF;

For where required or demanded, automatic unmute once temperature is down to 65 ºC / 149 ºF
▶▶ Long-term RMS protection: preventing loudspeaker damage from
the D4002R version comes factory-
equipped with a communication port, continuous non-audio signals by reducing output power
allowing remote control and monitoring ✓✓ Front-to-rear airflow cooling with variable-speed fan, temperature controlled
on the same network as all other ✓✓ Full four years warranty
Powersoft amplifiers via the same
✓✓ Options & accessories:
Armonía Pro Audio Suite™ software. ▶▶ “R” model – including comm port for remote monitoring per PC:
Both the D4002 and the D4002R -- On-board RS485 serial communication port on rear panel, for amplifier
come with 4 years warranty and, like control and monitoring via Armonía Pro Audio Suite™ software
all Powersoft products, are entirely -- Digitally controlled amplifier providing feedback of status information
designed and made in Italy. ▶▶ Armonía Pro Audio Suite, free at www.armoniasuite.com
▶▶ Power Control Hub, RS485 distribution and remote Power-on unit for up
to eight amplifiers, 19”/1 RU

powersoft_d4002_data_en_v2.2
D4002 / D4002R
2-Channel Power Amplifier for High-Quality Portable Sound Systems

Specifications
General
Number of channels 2
Output power 2-channel mode mono-bridged mode
EIAJ Test Standard, 1 kHz, 1% THD 2Ω 4Ω 8Ω 4Ω 8Ω
2 x 2,000 W 2 x 1,100 W 2 x 650 W 1 x 4,000 W 1 x 2,200 W
Max output voltage 101 Vpeak
AC Mains Power
Power supply Universal, regulated switch mode with PFC (Power Factor Correction)
Operating voltage 100 V - 240 V ± 10%, 50 Hz - 60 Hz
Power factor cos (φ) >0.95 @ >200 W
Consumption / current draw @ 230 V @ 115 V
Idle 87 VA 0.38 A 0.76 A
I/8 of max output power @ 4 Ω 1) 344 VA 1.9 A 3.8 A
I/4 of max output power @ 4 Ω 1) 688 VA 3.4 A 6.7 A
Thermal
Environmental operating temperature 0° - 45° C / 32° - 113° F
Thermal dissipation Fan, continuously variable speed, temperature controlled, front to rear airflow
Idle 60 kcal/hr 239 BTU/hr
I/8 of max output power @ 4 Ω 1) 119 kcal/hr 473 BTU/hr
I/4 of max output power @ 4 Ω 1) 179 kcal/hr 708 BTU/hr
Audio
Gain 32 dB
Input sensitivity @ 8 Ω 1.81 V / 7.32 dBu
Input filters Internally selectable per channel: high/low/band pass, 12 dB/oct, off/65/100/130 Hz
Gate Internally selectable per channel: off/-50 dBu
Input impedance 10 kΩ
Frequency response 5 Hz - 30 kHz (+/-3 dB)
THD+N / SMPTE IMD typ. <0.1% (<0.5% @ >0.1 W)
DIM100 IMD typ. <0.01% (<0.02% @ >0.1 W)
S/N ratio (amplifier section) >105 dB(A)
Crosstalk separation >70 dB @ 1 kHz
Slew rate 40 V/µs @ 8 Ω, input filter bypassed
Damping factor >600 @ 100 Hz
Front Panel
Indicators 3 LED’s per channel for output level: 3 x green, 1 x yellow, 1 x red
2 status LED’s per channel: green for signal present (-66 dBV), red for protection
2 status LED’s: green for amplifier ready, yellow for thermal protection
Controls 1 stepped level attenuator pot per channel
Mains power on/off switch

Rear Panel
Audio signal input connectors 2 x Combo XLR female/1/4” jack, electronically balanced
Loudspeaker output connectors 2 x Speakon® NL4MD
Controls Link switch, linking inputs 1 and 2
AC mains IEC C13 16 A (AC mains cord with 3-pin plug 15A for U.S., IEC ‘Schuko’ 16A for else)
Remote control interface RS485: 1 x RJ45 with 2 x rotary address switches
(optional “R” version)
Construction
Dimensions W 483 mm / 19”, H 44.45 mm / 1.75” / 1 RU, D 455 mm / 17.9”
Weight 8.5 kg / 18.7 lbs
Side & rear reinforcement, front panel 5 mm steel
Top & bottom lid, rear panel 1 mm steel

1) With pink noise. Data is subject to change without notice.


© 2012 Powersoft • All rights reserved.

Powersoft S.r.l. • Via Enrico Conti, 5 • 50018 Scandicci (FI) • Italy


+39 055 735 0230 • [email protected] • www.powersoft-audio.com

You might also like