BZW04-5V8 thru BZW04-376

www.vishay.com
Vishay General Semiconductor
TRANSZORB® Transient Voltage Suppressors
FEATURES
• Glass passivated chip junction
• Available in uni-directional and bi-directional
• 400 W peak pulse power capability with a
10/1000 μs waveform, repetitive rate 
(duty cycle): 0.01 %
• Excellent clamping capability
• Very fast response time
• Low incremental surge resistance
DO-204AL (DO-41)
• Solder dip 275 °C max. 10 s, per JESD 22-B106
• AEC-Q101 qualified
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912

TYPICAL APPLICATIONS
PRIMARY CHARACTERISTICS Use in sensitive electronics protection against voltage
VWM 5.8 V to 376 V transients induced by inductive load switching and lighting
VBR (uni-directional) 6.45 V to 462 V on ICs, MOSFET, signal lines of sensor units for consumer,
VBR (bi-directional) 6.45 V to 462 V
computer, industrial, and telecommunication.
PPPM 400 W
PD 1.5 W MECHANICAL DATA
IFSM (uni-directional only) 40 A Case: DO-204AL, molded epoxy over passivated chip
TJ max. 175 °C Molding compound meets UL 94 V-0 flammability rating
Polarity Uni-directional, bi-directional Base P/N-E3 - RoHS-compliant, commercial grade
Base P/NHE3 - RoHS-compliant, AEC-Q101 qualified
Package DO-204AL (DO-41)
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD22-B102
E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix
DEVICES FOR BI-DIRECTION APPLICATIONS meets JESD 201 class 2 whisker test
For bi-directional types, use B suffix (e.g. Note
BZW04P-6V4B). • BZW04-213(B) to BZW04-376(B) for commercial grade only

Electrical characteristics apply in both directions. Polarity: For uni-directional types the color band denotes
cathode end, no marking on bi-directional types

MAXIMUM RATINGS AND THERMAL CHARACTERISTICS (TA = 25 °C unles otherwise noted)

PARAMETER SYMBOL LIMIT UNIT
Peak pulse power dissipation with a 10/1000 μs waveform (1) (fig. 1) PPPM 400 W
Peak pulse current with a 10/1000 μs waveform (1) IPPM See next table A
Power dissipation on infinite heatsink at TL = 75 °C (fig. 5) PD 1.5 W
Peak forward surge current, 8.3 ms single half sine-wave uni-directional only (2) IFSM 40 A
Maximum instantaneous forward voltage at 25 A for uni-directional only (3) VF 3.5/5.0 V
Operating junction and storage temperature range TJ, TSTG -55 to +175 °C
Notes
(1) Non-repetitive current pulse, per fig. 3 and derated above T = 25 °C per fig. 2
A
(2) Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum
(3) V = 3.5 V for BZW04P(-)188 and below; V = 5.0 V for BZW04P(-)213 and above
F F

Revision: 02-Dec-13 1 Document Number: 88316

For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
 BZW04-5V8 thru BZW04-376
www.vishay.com
Vishay General Semiconductor

ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)

BREAKDOWN MAXIMUM MAXIMUM MAXIMUM MAXIMUM
VOLTAGE STAND-OFF
TEST REVERSE PEAK CLAMPING TEMPERATURE
VBR AT IT (1) VOLTAGE
PART NUMBER CURRENT LEAKAGE PULSE VOLTAGE AT COEFFICIENT
(V) VWM
IT (mA) AT VWM CURRENT IPPM OF
(V)
MIN. MAX. ID (4) (μA) IPPM (2) (A) VC (V) VBR (%/°C)
UNI-DIRECTIONAL TYPES
BZW04-5V8 6.45 7.14 10.0 5.80 1000 38.0 10.5 0.057
BZW04-6V4 7.13 7.88 10.0 6.40 500 35.4 11.3 0.061
BZW04-7V0 7.79 8.61 10.0 7.02 200 33.0 12.1 0.065
BZW04-7V8 8.65 9.55 1.0 7.78 50 30.0 13.4 0.073
BZW04-8V5 9.50 10.5 1.0 8.55 10 27.6 14.5 0.075
BZW04-9V4 10.5 11.6 1.0 9.4 5.0 25.7 15.6 0.075
BZW04-10 11.4 12.6 1.0 10.2 1.0 24.0 16.7 0.078
BZW04-11 12.4 13.7 1.0 11.1 1.0 22.0 18.2 0.081
BZW04-13 14.3 15.8 1.0 12.8 1.0 19.0 21.2 0.084
BZW04-14 15.2 16.8 1.0 13.6 1.0 17.8 22.5 0.086
BZW04-15 17.1 18.9 1.0 15.3 1.0 16.0 25.2 0.088
BZW04-17 19.0 21.0 1.0 17.1 1.0 14.5 27.7 0.090
BZW04-19 20.9 23.1 1.0 18.8 1.0 13.0 30.6 0.092
BZW04-20 22.8 25.2 1.0 20.5 1.0 12.0 33.2 0.094
BZW04-23 25.7 28.4 1.0 23.1 1.0 10.7 37.5 0.096
BZW04-26 28.5 31.5 1.0 25.6 1.0 9.6 41.5 0.097
BZW04-28 31.4 34.7 1.0 28.2 1.0 8.8 45.7 0.098
BZW04-31 34.2 37.8 1.0 30.8 1.0 8.0 49.9 0.099
BZW04-33 37.1 41.0 1.0 33.3 1.0 7.4 53.9 0.100
BZW04-37 40.9 45.2 1.0 36.8 1.0 6.7 59.3 0.101
BZW04-40 44.7 49.4 1.0 40.2 1.0 6.2 64.8 0.101
BZW04-44 48.5 53.6 1.0 43.6 1.0 5.7 70.1 0.102
BZW04-48 53.2 58.8 1.0 47.8 1.0 5.2 77.0 0.103
BZW04-53 58.9 65.1 1.0 53.0 1.0 4.7 85.0 0.104
BZW04-58 64.6 71.4 1.0 58.1 1.0 4.3 92.0 0.104
BZW04-64 71.3 78.8 1.0 64.1 1.0 3.9 103 0.105
BZW04-70 77.9 86.1 1.0 70.1 1.0 3.5 113 0.105
BZW04-78 86.5 95.5 1.0 78.0 1.0 3.2 125 0.105
BZW04-85 95.0 105 1.0 85.5 1.0 2.9 137 0.106
BZW04-94 105 116 1.0 94.0 1.0 2.6 152 0.107
BZW04-102 114 126 1.0 102 1.0 2.4 165 0.107
BZW04-110 124 137 1.0 111 1.0 2.2 179 0.107
BZW04-128 143 158 1.0 128 1.0 2.0 207 0.108
BZW04-136 152 168 1.0 136 1.0 1.8 219 0.108
BZW04-145 161 179 1.0 145 1.0 1.7 234 0.108
BZW04-154 171 189 1.0 154 1.0 1.6 246 0.108
BZW04-171 190 210 1.0 171 1.0 1.5 274 0.108
BZW04-188 209 231 1.0 188 1.0 1.4 301 0.108
BZW04-213 237 263 1.0 213 1.0 1.2 344 0.110
BZW04-239 266 294 1.0 239 1.0 1.1 384 0.110
BZW04-256 285 315 1.0 256 1.0 1.0 414 0.110
BZW04-273 304 336 1.0 273 1.0 0.90 438 0.110
BZW04-299 332 368 1.0 299 1.0 0.80 482 0.110
BZW04-342 380 420 1.0 342 1.0 0.75 548 0.110
BZW04-376 418 462 1.0 376 1.0 0.67 603 0.110

Revision: 02-Dec-13 2 Document Number: 88316

For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
 BZW04-5V8 thru BZW04-376
www.vishay.com
Vishay General Semiconductor

ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)

BREAKDOWN MAXIMUM MAXIMUM MAXIMUM MAXIMUM
VOLTAGE STAND-OFF
TEST REVERSE PEAK CLAMPING TEMPERATURE
VBR AT IT (1) VOLTAGE
PART NUMBER CURRENT LEAKAGE PULSE VOLTAGE AT COEFFICIENT
(V) VWM
IT (mA) AT VWM CURRENT IPPM OF
(V)
MIN. MAX. ID (4) (μA) IPPM (2) (A) VC (V) VBR (%/°C)
BI-DIRECTIONAL TYPES
BZW04-5V8B 6.45 7.14 10.0 5.80 1000 38.0 10.5 0.057
BZW04-6V4B 7.13 7.88 10.0 6.40 500 35.4 11.3 0.061
BZW04-7V0B 7.79 8.61 10.0 7.02 200 33.0 12.1 0.065
BZW04-7V8B 8.65 9.55 1.0 7.78 50 30.0 13.4 0.073
BZW04-8V5B 9.50 10.5 1.0 8.55 10 27.6 14.5 0.075
BZW04-9V4B 10.5 11.6 1.0 9.4 5.0 25.7 15.6 0.075
BZW04-10B 11.4 12.6 1.0 10.2 1.0 24.0 16.7 0.078
BZW04-11B 12.4 13.7 1.0 11.1 1.0 22.0 18.2 0.081
BZW04-13B 14.3 15.8 1.0 12.8 1.0 19.0 21.2 0.084
BZW04-14B 15.2 16.8 1.0 13.6 1.0 17.8 22.5 0.086
BZW04-15B 17.1 18.9 1.0 15.3 1.0 16.0 25.2 0.088
BZW04-17B 19.0 21.0 1.0 17.1 1.0 14.5 27.7 0.090
BZW04-19B 20.9 23.1 1.0 18.8 1.0 13.0 30.6 0.092
BZW04-20B 22.8 25.2 1.0 20.5 1.0 12.0 33.2 0.094
BZW04-23B 25.7 28.4 1.0 23.1 1.0 10.7 37.5 0.096
BZW04-26B 28.5 31.5 1.0 25.6 1.0 9.6 41.5 0.097
BZW04-28B 31.4 34.7 1.0 28.2 1.0 8.8 45.7 0.098
BZW04-31B 34.2 37.8 1.0 30.8 1.0 8.0 49.9 0.099
BZW04-33B 37.1 41.0 1.0 33.3 1.0 7.4 53.9 0.100
BZW04-37B 40.9 45.2 1.0 36.8 1.0 6.7 59.3 0.101
BZW04-40B 44.7 49.4 1.0 40.2 1.0 6.2 64.8 0.101
BZW04-44B 48.5 53.6 1.0 43.6 1.0 5.7 70.1 0.102
BZW04-48B 53.2 58.8 1.0 47.8 1.0 5.2 77.0 0.103
BZW04-53B 58.9 65.1 1.0 53.0 1.0 4.7 85.0 0.104
BZW04-58B 64.6 71.4 1.0 58.1 1.0 4.3 92.0 0.104
BZW04-64B 71.3 78.8 1.0 64.1 1.0 3.9 103 0.105
BZW04-70B 77.9 86.1 1.0 70.1 1.0 3.5 113 0.105
BZW04-78B 86.5 95.5 1.0 78.0 1.0 3.2 125 0.105
BZW04-85B 95.0 105 1.0 85.5 1.0 2.9 137 0.106
BZW04-94B 105 116 1.0 94.0 1.0 2.6 152 0.107
BZW04-102B 114 126 1.0 102 1.0 2.4 165 0.107
BZW04-110B 124 137 1.0 111 1.0 2.2 179 0.107
BZW04-128B 143 158 1.0 128 1.0 2.0 207 0.108
BZW04-136B 152 168 1.0 136 1.0 1.8 219 0.108
BZW04-145B 161 179 1.0 145 1.0 1.7 234 0.108
BZW04-154B 171 189 1.0 154 1.0 1.6 246 0.108
BZW04-171B 190 210 1.0 171 1.0 1.5 274 0.108
BZW04-188B 209 231 1.0 188 1.0 1.4 301 0.108
BZW04-213B 237 263 1.0 213 1.0 1.2 344 0.110
BZW04-239B 266 294 1.0 239 1.0 1.1 384 0.110
BZW04-256B 285 315 1.0 256 1.0 1.0 414 0.110
BZW04-273B 304 336 1.0 273 1.0 0.90 438 0.110
BZW04-299B 332 368 1.0 299 1.0 0.80 482 0.110
BZW04-342B 380 420 1.0 342 1.0 0.75 548 0.110
BZW04-376B 418 462 1.0 376 1.0 0.67 603 0.110
Notes
(1) Pulse test: t  50 ms
p
(2) Surge current waveform per fig. 3 and derated per fig. 2
(3) All terms and symbols are consistent with ANSI/IEEE C62.35
(4) For bi-directional types having V
WM of 10 V and less, the ID limit is doubled

Revision: 02-Dec-13 3 Document Number: 88316

For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
 BZW04-5V8 thru BZW04-376
www.vishay.com
Vishay General Semiconductor

ORDERING INFORMATION (Example)

PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE
BZW0410-E3/54 0.350 54 550 13" diameter paper tape and reel
BZW0410HE3/54 (1) 0.350 54 550 13" diameter paper tape and reel
Note
(1) AEC Q101 qualified

RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)

100 10 000
Non-Repetitive Pulse TJ = 25 °C
Waveform shown in Fig. 3 f = 1.0 MHz

CJ - Junction Capacitance (pF)

PPPM - Peak Pulse Power (kW)

TA = 25 °C Vsig = 50 mVp-p

10 1000 Measured at
Zero Bias

1 100

Measured at Stand-Off
Voltage VWM

0.1 10
0.1 1 10 100 1000 10 000 1 10 100 1000
td - Pulse Width (µs) VBR - Breakdown Voltage (V)
Fig. 1 - Peak Pulse Power Rating Curve Fig. 4 - Typical Junction Capacitance

100 100
Peak Pulse Power (PPP) or Current (IPP)

60 Hz
Resistive or
Derating in Percentage (%)

PD - Power Dissipation (%)

Inductive Load
75 75

50 50

L = 0.375" (9.5 mm)

Lead Lengths
25 25

0 0
0 25 50 75 100 125 150 175 200 0 25 50 75 100 125 150 175 200
TJ - Initial Temperature (°C) TL - Lead Temperature (°C)

Fig. 2 - Pulse Power or Current vs. Initial Junction Temperature Fig. 5 - Power Derating Curve

150 100
tr = 10 µs TJ = 25 °C
IPPM - Peak Pulse Current, % IRSM

Pulse Width (td) TJ = TJ Max.

Peak Forward Surge Current (A)

is defined as the Point 8.3 ms Single Half Sine-Wave

Peak Value where the Peak Current
IPPM Decays to 50 % of IPPM
100
Half Value - IPP
IPPM 2

50
10/1000 µs Waveform
as defined by R.E.A.

td
0 10
0 1.0 2.0 3.0 4.0 1 10 100
t - Time (ms) Number of Cycles at 60 Hz

Fig. 3 - Pulse Waveform Fig. 6 - Max. Non-Repetitive Forward Surge Current

Uni-Directional Only

Revision: 02-Dec-13 4 Document Number: 88316

For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
 BZW04-5V8 thru BZW04-376
www.vishay.com
Vishay General Semiconductor
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)

DO-204AL (DO-41)

1.0 (25.4)
MIN.

0.107 (2.7)
0.080 (2.0)
DIA.

0.205 (5.2)
0.160 (4.1)

1.0 (25.4)
MIN.

0.034 (0.86)
0.028 (0.71)
DIA.

Revision: 02-Dec-13 5 Document Number: 88316

For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
 Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Material Category Policy

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.

Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.

Revision: 02-Oct-12 1 Document Number: 91000