Scribd
Upload
65 views2 pages

Introductory Fluid Mechanics Taught Using A Carbur PDF

This document summarizes an experiment where students in an introductory fluid mechanics course used carburetors from small engines to learn fluid mechanics principles in a hands-on way. Students worked in teams to explore how carburetors work, then performed labs applying concepts like fluid statics, control volumes, internal and external flows. The paper describes the activities and tracks refinements over three years. Student feedback showed the carburetor labs helped apply abstract concepts to a real system and justified evolving the activity.

Uploaded by

Usman Ali Usman Ali
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
65 views2 pages

Introductory Fluid Mechanics Taught Using A Carbur PDF

This document summarizes an experiment where students in an introductory fluid mechanics course used carburetors from small engines to learn fluid mechanics principles in a hands-on way. Students worked in teams to explore how carburetors work, then performed labs applying concepts like fluid statics, control volumes, internal and external flows. The paper describes the activities and tracks refinements over three years. Student feedback showed the carburetor labs helped apply abstract concepts to a real system and justified evolving the activity.

Uploaded by

Usman Ali Usman Ali
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

See discussions, stats, and author profiles for this publication at: https://www.researchgate.

net/publication/315973400

Introductory Fluid Mechanics taught using a carburetor

Article · January 2017


DOI: 10.24908/pceea.v0i0.6541

CITATIONS READS
0 81

4 authors, including:

Andrew Trivett Cecile Devaud


University of Prince Edward Island University of Waterloo
17 PUBLICATIONS   233 CITATIONS    44 PUBLICATIONS   472 CITATIONS   

SEE PROFILE SEE PROFILE

Some of the authors of this publication are also working on these related projects:

Turbulent Combustion Modelling View project

All content following this page was uploaded by Andrew Trivett on 04 July 2018.

The user has requested enhancement of the downloaded file.


Introductory Fluid Mechanics taught using a carburetor
Andrew Trivett, Andrew Milne, Cecile Devaud, Tyler Gallant

The typical fluid mechanics introduction in mechanical engineering covers basic fluid statics, forces on
submerged bodies, control volumes, continuity, conservation of momentum, conservation of energy,
Reynolds' transport theorem, internal and external flows. Students often struggle with the basic concepts
and how they might apply to a real system.

In the winter of 2015, a new set of open-ended labs were created for mechanical engineering students.
Teams of 3 or 4 students in a third-year class of 110 were each given a small engine, and removed the
carburetors. The series of labs had them discover some of the principles within the small carburetor from
a single-cylinder 4-stroke gasoline engine. Students were asked to explore and explain how the
carburetor worked, and then progressed through a set of hands-on labs culminating with a design
modification and performance measurement of a real carburetor. At each stage, the students applied
principles of fluid statics, control volumes, internal flow losses, and external flow drag to the physical
device.

The paper will describe the specific activities, and track the evolution of refinements to the experience
through three implementations of the same course by three different instructors. Student feedback and
measured evidence of learning will be reported to help justify the evolution of the activity. The
scalability of the activity will be discussed.

View publication stats

You might also like