Truss: Types and

Classification
Structural Analysis-I
Lecture Outlines

 Common Types of Trusses

 Classification of Coplanar Trusses

2
Common Types of Trusses

gusset plate

• Roof Trusses roof

top cord

knee brace
bottom
cord gusset plate
bay
span 3
 Howe truss Pratt truss

howe truss Warren truss

saw-tooth truss
Fink truss

three-hinged arch
4
Bridge Trusses

sway top cord

5
trough Pratt truss Warren truss

deck Pratt truss parker truss

Howe truss baltimore truss

K truss
6
Assumptions for Design
 All members are connected at both ends
by smooth frictionless pins.
 All loads are applied at joints (member
weight is negligible).
 Notes:
 Centroids of all joint members coincide at the
joint.
 All members are straight.
 All load conditions satisfy Hooke’s law.
7
Classification of Coplanar Trusses

• Simple Trusses

P C D C P C
P D

A B A B A B

new members
a d (new joint)

b c

8
• Compound Trusses

simple truss simple truss simple truss simple truss

Type 1 Type 2

secondary
simple truss secondary
simple truss
secondary secondary
simple truss simple truss
main simple truss

Type 3
9
• Complex Trusses

• Determinacy

b + r = 2j statically determinate
b + r > 2j statically indeterminate

In particular, the degree of indeterminacy is specified by the difference in the

10
• Stability

b + r < 2j unstable
b + r > 2j unstable if truss support reactions are concurrent or parallel
or if some of the components of the truss form a collapsible
mechanism

External Unstable

Unstable-parallel reactions Unstable-concurrent reactions

11
Internal Unstable

O
D A B E
8 + 3 = 11< 2(6)

AD, BE, and CF are concurrent at point O

12
Example 3-1

Classify each of the trusses in the figure below as stable, unstable, statically
determinate, or statically indeterminate. The trusses are subjected to arbitrary
external loadings that are assumed to be known and can act anywhere on the
trusses.

13
SOLUTION

Externally stable, since the reactions are not concurrent or parallel. Since b = 19,
r = 3, j = 11, then b + r = 2j or 22 = 22. Therefore, the truss is statically determinate.
By inspection the truss is internally stable.

Externally stable. Since b = 15, r = 4, j = 9, then b + r > 2j or 19 > 18. The truss
is statically indeterminate to the first degree. By inspection the truss is internally
stable.
14
Externally stable. Since b = 9, r = 3, j = 6, then b + r = 2j or 12 = 12. The truss is
statically determinate. By inspection the truss is internally stable.

Externally stable. Since b = 12, r = 3, j = 8, then b + r < 2j or 15 < 16. The truss
is internally unstable.

15
16