Scribd
Upload
218 views1 page

Connection Design:: SB NB Ub Yb Mo MB MF

1) The document provides design details for a connection using black bolts with a 25mm diameter and 27mm bolt hole diameter. The material properties and codal provisions for bolt pitch and edge distances are also given. 2) Calculations show the design shear strength per bolt is 70.74kN, bearing strength per bolt is 245.37kN, and tension capacity per bolt is 133.8747kN. 3) With a total design force of 7906kN, 115 bolts are required based on the calculated bolt value of 70.74kN.

Uploaded by

Suman Nakarmi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
218 views1 page

Connection Design:: SB NB Ub Yb Mo MB MF

1) The document provides design details for a connection using black bolts with a 25mm diameter and 27mm bolt hole diameter. The material properties and codal provisions for bolt pitch and edge distances are also given. 2) Calculations show the design shear strength per bolt is 70.74kN, bearing strength per bolt is 245.37kN, and tension capacity per bolt is 133.8747kN. 3) With a total design force of 7906kN, 115 bolts are required based on the calculated bolt value of 70.74kN.

Uploaded by

Suman Nakarmi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Connection Design:

Design Force : 7906 kN


Material Properties:
i) Bolt
Type: Black Bolt Grade: 4.6
Diameter: 25 Bolt Hole Diameter, 27
Bolt Shank Area, Asb = 490.87 Bolt Tensile stress Area, Anb = 382.88
Ult. tensile stress of bolt, fub = 400 Yield stress of the bolt, fyb = 240
γmo γmb γmf
Partial Safety Factor 1.1 1.25 1.25
Structural Steel :
Description Grade Gusset Plate Structural Member
Characterstic ultimate tensile stress, fu = 500 500 500
Chracterstic yield stress,fy = 410 410
Thickness,t = 25 40

Codal Provision for Minimum and Maximum Pitch of Bolt and Rivet:
Minimum Pitch: 62.5 Max Edge distance: 300.00 mm
Max Pitch: 200 mm Min. edge distance: 37.50
Provided Pitch: 60 mm Provided Edge Distance : 50 mm

i) Design shear strength of bolt (Vdsb) = ((fub*(nnAnb+nsAsb))/√3)/γmb 70.74 kN


2
nn= 1 ns= 0 Anb = 382.88 mm Asb= 490.87 mm2
ii) Design bearing strength of bolt, (Vdpb) = 2.5Kbdtf'u/γmb 245.37 kN
Thickness,t = 25 mm f'u= 400
Kb= e/3do,P/3do-0.25, fub/fy,1.0 = e/3do P/3do-0.25 fub/fy 1 0.49
0.62 0.49 0.80 1.0

iii) Tension Bolt Capacity ( Tnb) = 0.90 fub Anb < fyb Asb(γmb/γmo) 133.8747 kN

Bolt Value = 70.74 kN

Number of Bolt, n = Tu / Bolt Value 111.7643


Provided Bolt 115

You might also like