Middle of Pyramid - Test # 42 -Polymer

Contact Number: 9667591930 / 8527521718

1.
(c) phenol and formaldehyde
The monomer of the polymer
(d) tetramethylene glycol
6.
Terylene is a condensation polymer of ethylene glycol
and
 is :-
(a) benzoic acid
(b) phthalic acid
(a) (c) salicylic acid
(b) (CH 3)
2
C = C(CH3 )
2
(d) terephthalic acid
(c) CH 3 CH = CH ⋅ CH3 7.
(d) CH 3 CH = CH2 Melamine plastic crockery is a copolymer of:
2. (a) HCHO and melamine
Thermoplastics are: (b) HCHO and ethylene
(a) linear polymers (c) melamine and ethylene
(b) soften or melt on heating  (d) none of the above
(c) molten polymer can be moulded in desired shape 8.
(d) all of the above Acrilan is a hard, horny and a high melting material.
Which of the following represents its structure ?
3.

 
4.
Nylon-66 is a polyamide obtained by the reaction of
(a) COOH(CH 2
)4 COOH   +  H2 NC6 H4 NH2   −  (p)
9.
(b) COOH(CH 2 )4 COOH   +   NH2 (CH2 )6 NH2  
Of the following which one is classified as polyster
polymer ?
(c) COOH(CH 2 )4 COOH   +   NH2 (CH2 )4 NH2  

(a) Bakelite
(d) COOHC 6 H4 COOH   −  (p)  +   NH2 (CH2 )6 NH2

(b) Melamine
5.
(c) Nylon-66
Bakelite is prepared by the reaction between
(d) Terylene
(a) urea and formaldehyde
10.
(b) ethylene glycol
Which one of the following monomers gives the polymer
Page: 1
 Middle of Pyramid - Test # 42 -Polymer
Contact Number: 9667591930 / 8527521718

neoprone on polymerisation? (a) a trans-1,4-polyisoprene polymer

(b) a very hard material
(c) a synthetic polymer
(a)  (d) all of the above
(b) CF 2 = CF2 16.
(c) CH 2 = CHCl Which one of the following is an example of a
thermosetting polymer ?
(d) CCl 2 = CCl2

11.

Monomer of   is 

(a) 2-methyl propene
(b) styrene
(c) propylene
17.
(d) ethene
Which one of the following is not a condensation
12. polymer?
Polymerisation of chloroethylene gives the polymer: [2012]
(a) polythene (a) Melamine
(b) PVC (b) Glyptal
(c) teflon (c) Dacron
(d) nylon (d) Neoprene
13. 18.
Glyptal or alkyd is polymer of: Buna-S is a synthetic copolymer of:
(a) ethylene glycol and phthalic acid (a) Styrene and 1,3-butadiene
(b) ethylene and ohthalic acid (b) styrene and ethylene
(c) phthalic acid and acetylene (c) 1,3-butadiene and ethylene
(d) none of the above (d) none of the above
14. 19.
Example of addition polymer is: Buna rubber is a polymer of:
(a) buna-S (a) 1,3-btadiene
(b) bakelite (b) vinyl acetate
(c) nylon-6 (c) styrene
(d) malamac (d) none of these
15. 20.
Gutta parcha rubber is: Natural rubber is a polymer of :-
Page: 2
 Middle of Pyramid - Test # 42 -Polymer
Contact Number: 9667591930 / 8527521718

(1) Isoprene  
(2) Styrene 27.
(3) Ethylene The abbreviation PDI refers to:
(a) name of the polymer
(4) Butadiene (b) polydispersity index of polymer
21. (c) application of polymer
(d) poly diagonal index
Which of the following is used to make non stick
cookware ? 28.

(1) PVC The monomer units of silicons a water repellant, acid

resistant and heat resistant polymer is:
(2) Polysterene
(a) Si                          (b) SiO2
(3) Polyethylene
(c) R2SiO                    (d) none of these
(4) PTFE
22. 29.

A copolymer of isobutylene and isoprene is called: The monomer units of PTFE are:

(a) butyl rubber                   (b) buna-S (a) Cl2CH-CH3

(c) buna-N                          (d) thiokol (b) F2C=CF2

23. (c) F3C-CF3
Terylene is a: (d) FClC=CF2
(a) polyamide                      (b) polyester
30.
(c) polyether                       (d) long chain hydrocarbon
Which of the following natural products is not a polymer
24. ?
Thermosets are: (a) DNA
(a) cross-linked polymers (b) Cellulose
(b) don’t melt or soften on heating (c) ATP
(c) cross-linking is usually developed at the time of (d) Urease
moulding where they harden reversibly
31.
(d) all of the above
Which of the following is wrong?
25. (a) PMMA is called plexiglass
(b) PTFE is called teflon
Which are true for terpolymer?
(c) SBR is called natural rubber
(a) Contains three monomers (d) LDPE is called low density polyethylene
(b) ABS plastic 32.
(c) A polymer of acrylonitrile, butadiene and styrene Nylons, polyesters and cotton, all possess strength due to:
(d) All of the above (a) intermolecule H-bonding
26. (b) van der Waals’ attraction
Nylon-6, 10 is a polymer of. (c) dipole-dipole interaction
(a) hexamethylene and adipic acid
(d) none of the above
(b) hexamethylene and sebacic acid
(c) caprolactam 33.
(d) none of the above
Page: 3
 Middle of Pyramid - Test # 42 -Polymer
Contact Number: 9667591930 / 8527521718
40.
The catalyst used in the manufacture of polythene by
Ziegler method is: Which is the monomer of neoprene in the following?
(a) titanium tetrachloride and triphenyl aluminium
(b) titanium tetrachloride and triethyl aluminium (a) CH2=CH-c=CH
(c) titanium dioxide C
(d) titanium isopropoxide (b) CH2= |
-CH=CH2
34. CH3

Of the following which is a step growth polymer? CH2 = C − CH = CH2

(c)  |

(a) Bakelite Cl

(b) Polyethylene (d) CH2=CH-CH=CH2

(c) Teflon 41.

(d) PVC Which one of the following is not a condensation
polymer?
35.
(a) Melamine
Example of addition polymer is:
(b) Glyptal
(a) buna-S
(c) Dacron
(b) bakelite
(d) Neoprene
(c) nylon-6
42.
(d) malamac
Of the following which one is classified as polyester
36. polymer?
Condensation of caprolactam gives: (a) Bakelite
(b) Melamine
(a) nylon-6,6               (b) nylon-6 (c) Nylon-66
(c) nitrile rubber          (d) nylon-6,10 (d) Terylene

37. 43.
Which one of the following statements is not true?
Natural silk and artificial silk differ in one respect that
one of them contains: (a) In vulcanisation, the formation of sulphur bridges between
(a) N                      (b) S different chains make rubber harder and stronger.
(c) P                       (d) none of these (b) Natural rubber has the trans-configuration at every double
bond.
38.
(c) Buna-S is a copolymer of butadiene and styrene.
Caprolactam is used for the manufacture of
(a) nylon-6 (d) Natural rubber is a 1,4-polymer of isoprene.
(b) tetion
(c) terylene 44.
(d) nylon-6 6 [NH(CH)2NHCO(CH2)4CO]n is a:
39.
(a) co-polymer
Which one is protein fiber?
(b) addition polymer
(a) Cotton
(c) thermo-setting polymer
(b) Rayon
(d) homopolymer
(c) Silk
45.
(d) Polyester
(i) What is the role of Sulphur in the vulcanization of
Page: 4
 Middle of Pyramid - Test # 42 -Polymer
Contact Number: 9667591930 / 8527521718

rubber ?
(ii) Identify the monomers in the following polymer :

(iii)  Arrange the following polymers in the increasing

order of their intermolecular forces :
Terylene, Polythene, Neoprene                                           
                (3)
 
 
 
 

Fill OMR Sheet

Page: 5