Al Masoudia Electrical Industries Co. Ltd.

Earthing and Lightening Protection System

Cable Lugs - Connectors - Terminations and Ex-Weld

Global Manufacturers Of Cable Management Systems

 CONTENTS

General Introduction 2 Exothermic Weld System 24

Earthing and lightning systems 4 Exothermic Welding System 25
Air terminal multiple point 5 How to inspect the mold 26
Air terminal 5 Weld connection 26
Air terminal bases 5 Weld powder 27
Air terminal ridge saddle 6 Weld accessories 27
Air terminal fixing bracket 6 Welding Instruction 28
Air terminal to tape coupling 6 Cable to cable connection 29
DC tape clip 7 Cable to rod / rod to rod connection 32
Oblong junction clamp 7 Cable to concrete steel re-bar connection 35
Tape Clip 7 Cable to steel surface and cable to steel pipe connection 38
Plate test clamp 8 Cable to copper tape connection 40
Screwdown test clamp 8 Busbar to busbar connection 43
Bare copper tape 8 Information 44
One hole cable clips 9
Heavy duty cable saddle 9
Cable Lugs Connectors Termination 46
Square clamp 9 Compression cable lugs 47
Jointing parallel clamp 10 Heavy duty compression cable lugs 48
Tee joint solid conductor clamp 10 Long barrel compression cable lugs 48
Junction clamp 10 Two hole compression cable lugs 48
Re-bar clamp 11 Four holes compression cable lugs 49
Tower clamp 11 Aluminium compression cable lugs 49
Test conductor clamp 11 Aluminium long barrel compression cable lugs 50
Square conductor clamp 12 Aluminium compression joints 50
Double plate tower clamp 12 Standard barrel compression joints 51
Square tape clamp 12 Mechanical cable lugs 51
Earth rods 13 Bus bar connectors 52
Solid copper earth plate 16 Mechanical straight connectors 52
Lattice copper earth plate 16 Mechanical parallel tap connectors 52
Earth rod to tabe clamp 17 Split-bolt connector 53
Earth rod to cable clamp 17 Aluminium parallel groove connector 54
Erth rod u-bolt clamp 17 Aluminium copper parallel groove connector 54
Earth rod to cable GUV tybe clamp 18 (C) type comprission connectors 55
Earth rod to cable lug clamp 18
Beam to tape bond 19
Rain pipe to tape bond 19
Water pipe tape bond 19
Flexible copper earth braid 20
Static earth receptacle 20
Single hole earth point 20
Two hole earth point 21
Four hole earth point 21
Earth bar 22
Earth bar with single disconnecting link 22
Earth bar with twin disconnecting link 22
Disconnecting link 23
Swan - neck link 23
General Introduction

While serving the industry of the cable managements systems by

introducing our total solutions for cable installation and supports,
the earthing and lightening systems had become an essential
requirements to be included in our products line in order to
complete our solutions and serve the total line of industry in the
best shape.

The long extensive experience of MASEICO team in this field,

developed machinery, latest production technology, certification
and standards play a big role leading those products to front line
of quality.

Earthing and lightening protection systems, cable lugs, cable

terminations and Ex-Weld technology including powder and
moulds are available in accordance to the latest international
standards and market needs, as well, UL certification in order to
be able to compete and lead in the international markets and
mega vital projects. on the other hand any customised shapes
and new non-standard sizes can be developed and produced
in-house, since MASEICO has its own design and development
well experienced team.

2
 MASEICO TOTAL SYSTEM
PROTECTION 12
11
12
1- Copper tape
2- Solid circular conductor 10
10 11
3- DC tape clip 1
4- Square tape clamp
5- Oblong junction clamp
9
6- Plate test clamp 3
7- Screwdown test clamp
8- Tee joint solid conductor clamp 9 4
9- Double plate tower clamp
1
10- Test clamp for solid circular
11- Air terminal fixing
12 - Air terminal
13- Earth rods
1
14 - Earth rod to tabe clamp
15- Earth rod to cable clamp
16- Solid copper earth plate 2
19
17- Lattice copper earth plate
18- Taper coupling
19- Beam to tape bond 1 8
3 14
6 9 18
7
10 5 13
15
13
14
16
13
17
 Earthing and
Lightning Protection
Systems

4
Air terminal multiple point

Rod Rod Ordering referance

diameter diameter

15 mm Copper MATM

Air terminal

Length Diameter Material Ordering referance

500 mm 15 mm Copper MCT5C

1000 mm 15 mm Copper MCT10C
2000 mm 15 mm Copper MCT20C
500 mm 15 mm Aluminum MAT5A
1000 mm 15 mm Aluminum MAT10A
2000 mm 15 mm Aluminum MAT20A

Air terminal bases

Max. conductor Rod Thread Material Ordering

width diameter diameter referance

25 mm 15 mm 16 mm Copper MATBC
25 mm 15 mm 16 mm Aluminum MATBA

Conductor Rod Conductor Ordering

size diameter material referance

50 mm2 15 mm Copper MATB50

2
70 mm 15 mm Copper MATB70
2
95 mm 15 mm Copper MATB95

5
Air terminal ridge saddle

Rod Conductor Rod Ordering

diameter width material referance

15 mm 30 mm Copper MATRS

Air terminal fixing bracket

Rod Rod Ordering

diameter material referance

15 mm Copper MATFBC
15 mm Aluinum MATFBA

Air terminal to tape coupling

Rod Rod Ordering

diameter material referance

15 mm Copper MATTCC
15 mm Aluinum MATTCA
15 mm Copper MATTCCC
15 mm Aluinum MATTCCA

6
DC tape clip

Conductor Ordering
Width Thickness Material referance

20 mm 3 mm Bare aluminum MDCTCA203

25 mm 3 mm Bare aluminum MDCTCA253
25 mm 6 mm Bare aluminum MDCTCA256
50 mm 6 mm Bare aluminum MDCTCA506
20 mm 3 mm Bare copper MDCTCC203
25 mm 3 mm Bare copper MDCTCC253
25 mm 4 mm Bare copper MDCTCC254
25 mm 8 mm Bare copper MDCTCC258
31 mm 3 mm Bare copper MDCTCC313
31 mm 6 mm Bare copper MDCTCC316
38 mm 3 mm Bare copper MDCTCC383
38 mm 5 mm Bare copper MDCTCC385
38 mm 6 mm Bare copper MDCTCC386
40 mm 4 mm Bare copper MDCTCC404
40 mm 6 mm Bare copper MDCTCC406
50 mm 3 mm Bare copper MDCTCC503
50 mm 4 mm Bare copper MDCTCC504
50 mm 6 mm Bare copper MDCTCC506

Oblong junction clamp

Conductor Conductor Ordering referance

size material

26 x 8 mm Copper MOJCC
26 x 8 mm Aluminum MOJCA

Tape Clip

Conductor Conductor Ordering referance

size material

20 x 3 mm Copper MTCC203
25 x 3 mm Copper MTCC253
20 x 3 mm Aluminum MTCA203
25 x 3 mm Aluminum MTCA253

7
Plate test clamp

Conductor Ordering
referance
size material

26 x 8 mm Copper MPTC

Screwdown test clamp

Conductor Ordering
size material referance

26 x 8 mm Copper MSTC

Bare copper tape

Conductor Ordering
Width Thickness referance

12.5 mm 1.5 mm MCT12515

12.5 mm 3 mm MCT12530
20 mm 1.5 mm MCT20015
20 mm 3 mm MCT20030
25 mm 1.5 mm MCT25015
25 mm 3 mm MCT25030
W
T
25 mm 4 mm MCT25040
25 mm 6 mm MCT25060
30 mm 2 mm MCT30020
30 mm 3 mm MCT30030
30 mm 4 mm MCT30040
30 mm 5 mm MCT30050
31 mm 3 mm MCT31030
31 mm 4 mm MCT31040
31 mm 6 mm MCT31060
38 mm 3 mm MCT38030
38 mm 5 mm MCT38050
38 mm 6 mm MCT38060
40 mm 3 mm MCT40030
40 mm 4 mm MCT40040
40 mm 5 mm MCT40050
40 mm 6 mm MCT40060
50 mm 3 mm MCT50030
50 mm 4 mm MCT50040
50 mm 5 mm MCT50050
50 mm 6 mm MCT50060

8
One hole cable clips

Conductor Ordering
size material referance

8 mm Copper MCC8C
8 mm Aluminum MCC8A
10 mm Copper MCC10C
10 mm Aluminum MCC10A
2
50 mm Copper MCC50C
2
70 mm Copper MCC70C
2
95 mm Copper MCC95C

Heavy duty cable saddle

Conductor Ordering
size material referance

8 mm Copper MCS8C
8 mm Aluminum MCS8A
10 mm Copper MCS10C
10 mm Aluminum MCS10A
2
50 mm Copper MCS50C
2
70 mm Copper MCS70C
2
95 mm Copper MCS95C

Square clamp

Conductor Ordering
diameter material referance

8 mm Copper MSC8C
8 mm Aluminum MSC8A

9
Jointing parallel clamp

Conductor Ordering
diameter material referance

8 mm Copper MPC8C
8 mm Aluminum MPC8A

Tee joint solid conductor clamp

Conductor Ordering
diameter material referance

8 mm Copper MTC8C
8 mm Aluminum MTC8A

Junction clamp

Conductor Ordering
diameter material referance

8 mm Copper MJC8C
8 mm Aluminum MJC8A

10
Re-bar clamp

Conductor Conductor
Bar Ordering
diameter material diameter
Material referance

8 mm Copper 8mm-18mm
Copper MRC1
8 mm Copper 18mm-38mm
Aluminum MRC2

Tower clamp

Conductor Ordering
Diameter Material referance

8 mm Copper MJC8C
8 mm Aluminum MJC8A

Test conductor clamp

Conductor Ordering
Size Material referance

50 mm 2 Copper MTCC50
2
70 mm Copper MTCC70
2
95 mm Copper MTCC95

11 8
Square conductor clamp

Conductor Ordering
Size Material referance

50 mm 2 Copper MOCC50
2
70 mm Copper MOCC70
2
95 mm Copper MOCC95

Double plate tower clamp

Conductor Ordering
Size Material referance
2 Copper MDTC50
50 mm
70 mm2 Copper MDTC70
120 mm2 Copper MDTC120
185 mm2 Copper MDTC185
2 Copper MDTC240
240 mm

Square tape clamp

Conductor material Ordering

size referance

25 × 3 mm Copper MSTC253C
25 × 6 mm Copper MSTC256C
31 × 3 mm Copper MSTC313C
50 × 6 mm Copper MSTC506C
25 × 3 mm Aluminum MSTC253A

12
Earth rods

Copper bond threaded earth rods

Conductor Ordering
Length Diameter Material referance

1200 mm 1/2" Copper bond MCBTR11

1500 mm 1/2" Copper bond MCBTR12
1800 mm 1/2" Copper bond MCBTR13
2400 mm 1/2" Copper bond MCBTR14
Coupling
1200 mm 5/8" Copper bond MCBTR21
1500 mm 5/8" Copper bond MCBTR22
1800 mm 5/8" Copper bond MCBTR23
2400 mm 5/8" Copper bond MCBTR24
3000 mm 5/8" Copper bond MCBTR25
Rod 1200 mm 3/4" Copper bond MCBTR31
1500 mm 3/4" Copper bond MCBTR32
1800 mm 3/4" Copper bond MCBTR33
2400 mm 3/4" Copper bond MCBTR34
3000 mm 3/4" Copper bond MCBTR35

Coupling

Eaerth rod copper bond driving stud

Rod size Ordering referance

1/2" MDS1
5/8" MDS2
3/4" MDS3

Eaerth rod threaded coupling

Rod size Ordering referance

1/2" MRC1
Rod 5/8" MRC2
3/4" MRC3

13
Earth rods
Copper bond unthreaded earth rod

Conductor Ordering
Length Diameter Material referance

1200 mm 9 mm Copper bond MCBUTR01

1200 mm 12.7 mm Copper bond MCBUTR11
1500 mm 12.7 mm Copper bond MCBUTR12
Rod 1800 mm 12.7 mm Copper bond MCBUTR13
2400 mm 12.7 mm Copper bond MCBUTR14
1200 mm 14.2 mm Copper bond MCBUTR21
1500 mm 14.2 mm Copper bond MCBUTR22
1800 mm 14.2 mm Copper bond MCBUTR23
2000 mm 14.2 mm Copper bond MCBUTR24
2400 mm 14.2 mm Copper bond MCBUTR25
3000 mm 14.2 mm Copper bond MCBUTR26
1200 mm 17.2 mm Copper bond MCBUTR31
1500 mm 17.2 mm Copper bond MCBUTR32
1800 mm 17.2 mm Copper bond MCBUTR33
2000 mm 17.2 mm Copper bond MCBUTR34
Taper coupling
2400 mm 17.2 mm Copper bond MCBUTR35
3000 mm 17.2 mm Copper bond MCBUTR36

Eaerth rod unthreaded coupling

Rod size Ordering referance

12.7 mm MRUC1
14.2 mm MRUC2
17.2 mm MRUC3

Rod

14
Earth rods
Solid copper earth rods
Conductor Ordering
Length Diameter Material referance

1200 mm 15 mm Copper MSCR11

1200 mm 20 mm Copper MSCR21
1200 mm 15 mm S. steel MSSR11
1200 mm 20 mm S. steel MSSR21

Rod
Eaerth rod sold driving stud

Rod size Material Ordering referance

15 mm Copper MSCDS1
20 mm Copper MSCDS2
15 mm S. steel MSSDS1
Dowel
20 mm S. steel MSSDS2

Eaerth rod s.steel dowel coupling

Ordering referance

MDC

Rod
Eaerth rod spike

Rod size Ordering referance

15 mm MRS1
20 mm MRS2

Spike

15
Solid copper earth plate

Size Material Ordering

referance

600×600×1.5 mm Copper MSCP11

900×900×1.5 mm Copper MSCP12
600×600×3 mm Copper MSCP21
900×900×3 mm Copper MSCP22

Lattice copper earth plate

Size Material Ordering

referance

600×600×3 mm Copper MLCP21

900×900×3 mm Copper MLCP22

16
Earth rod to tape clamp

Conductor Ordering
rod diameter width thickness referance

1/2" 26 mm 12 mm MTC114
5/8" 26 mm 12 mm MTC214
3/4" 26 mm 10 mm MTC313
5/8" 30 mm 2 mm MTC221
3/4" 30 mm 2 mm MTC321
5/8" 40 mm 12 mm MTC234
5/8" 50 mm 8 mm MTC242
3/4" 50 mm 12 mm MTC344
1/2" 26 mm 20 mm MTC116
5/8" 26 mm 19 mm MTC215
3/4" 26 mm 10 mm MTC313
1" 26 mm 10 mm MTC413

Earth rod to cable clamp

Conductor Ordering
Rod diameter Size Material referance

3/4" 35 mm2 Copper MCC31

2
1/2" 50 mm Copper MCC12
2
5/8" 70 mm Copper MCC23
2
3/4" 95 mm Copper MCC34
2
1" 120 mm Copper MCC45

Erth rod u-bolt clamp

Conductor Ordering
rod diameter Rod raduis referance

5/8" 8 mm MUB21
3/4" 9.5 mm MUB32
1" 12.7 mm MUB43

17
Earth rod to cable GUV tybe clamp

Conductor Ordering
Rod diameter Size raduis referance

5/8" 95 mm2 6.25 mm MGUV222

2
3/4" 70 mm 5.25 mm MGUV311
2
5/8" 185 mm 8.75 mm MGUV234
3/4" 150 mm2 7.85 mm MGUV343
2
5/8" 300 mm 11.25 mm MGUV255
2
3/4" 300 mm 11.25 mm MGUV365

Earth rod to cable lug clamp

Conductor Ordering
size Rod material referance

3/8" Copper bond MRTC0B

5/8" Copper bond MRTC2B
5/8" Solid copper MRTC2B
3/4" Copper bond MRTC3B
3/4" Solid copper MRTC3B

18
Beam to tape bond

Conductor Ordering
Width Material referance

26 mm Copper MBTT1C
26 mm Aluminum MBTT1A
31 mm Copper MBTT2C

Rain pipe to tape bond

Conductor Ordering
Width Material referance

26 mm Copper MRPT1C
26 mm Aluminum MRPT1A

Water pipe tape bond

Conductor Ordering
Width Material referance

26 mm Copper MWPT1C

19
Flexible copper earth braid

Width Height Ordering referance

25 mm 3.5 mm MFCB2535

Static earth receptacle

Conductor Ordering referance

material

Copper MSER

Single hole earth point

Hole Hole size Ordering referance

1 hole M8×15 mm MSHEP

20
Two hole earth point

Holes Hole size Front Plate Ordering

referance

2 holes M8×12 mm For 25×3mm copper MTHEP1

2
tape or 70mm
2 holes M8×12 mm For 25×3mm copper MTHEP2
tape or 8mm solid
circular copper
conductor
2 holes M8×12 mm Without MTHEP3

Four hole earth point

Hole size Ordering referance

M8×14 mm MFHEP

21
Earth bar
Length (mm) Width (mm) Height (mm) Way Ordering referance

400 90 90 6-way MEB4006

500 90 90 8-way MEB5008
650 90 90 10-way MEB65010
750 90 90 12-way MEB75012
850 90 90 14-way MEB85014
950 90 90 16-way MEB95016
1050 90 90 18-way MEB105018
1200 90 90 20-way MEB120020
1300 90 90 22-way MEB130022
1400 90 90 24-way MEB140024
1500 90 90 26-way MEB150026
1650 90 90 28-way MEB165028
1750 90 90 30-way MEB175030

Earth bar with single disconnecting link

Length (mm) Width (mm) Height (mm) Way Ordering referance

475 90 96 6-way MEBSL4756

575 90 96 8-way MEBSL5758
725 90 96 10-way MEBSL72510
825 90 96 12-way MEBSL82512
925 90 96 14-way MEBSL92514
1025 90 96 16-way MEBSL102516
1125 90 96 18-way MEBSL112518
1275 90 96 20-way MEBSL127520
1375 90 96 22-way MEBSL137522
1475 90 96 24-way MEBSL147524
1575 90 96 26-way MEBSL157526
1725 90 96 28-way MEBSL172528
1825 90 96 30-way MEBSL182530

Earth bar with twin disconnecting link

Length (mm) Width (mm) Height (mm) Way Ordering referance

550 90 96 6-way MEBT5506

650 90 96 8-way MEBT6508
800 90 96 10-way MEBT80010
900 90 96 12-way MEBT90012
1000 90 96 14-way MEBT100014
1100 90 96 16-way MEBT110016
1200 90 96 18-way MEBT120018
1350 90 96 20-way MEBT135020
1450 90 96 22-way MEBT145022
1550 90 96 24-way MEBT155024
1650 90 96 26-way MEBT165026
1800 90 96 28-way MEBT180028
1900 90 96 30-way MEBT190030

22
Disconnecting link

Length (mm) Width (mm) Height (mm) Ordering referance

400 50 36 MDCL400

Swan - neck link

Ordering referance

MSNL

23
Exothermic Weld
System

24
Exothermic Welding System

To produce a permanent electrical solid connection of copper to copper or copper to steel without
having on external source of power, the mold and powder is being designed and manufactured to suite
any required shape and size of connection.

The principle consists of bringing together a welding filler material and ignition agent in a suitable
graphite mould. The weld metal composition depends upon the metals to be welded (copper oxide and
aluminum for a copper/copper weld).

The reduction of copper oxide by aluminum produces molten copper and aluminum oxide slag at
extremely high temperatures.

The shape of the mould, its dimensions, and the size of the weldmetal, are all dependent on the items
to be welded and their size.

25
How to inspect the mold

The mold is designed to serve an average of 80 shots if treated, inspected and maintained in proper
way, hence, in order to achieve that, you need to fallow the below check points.

1- Weld cavity:
- No chips or gouges shall exist inside the cavity.
- The cavity shall be well defined.

2- Conductor shall fit the opening:

- Since any lose will result in powder leakage.
- No cracks or worn out shall appear on the opening.

Weld connection

Placing the conductors inside the mold, filling the powder and igniting is all what you need to make the
point.
The joint will be clean, smooth with the required suitable properities.
This weld can be applied to other molds like iron, steel, cast iron bronze and rail ways.
It can be applied to serve the following projects:
- Grounding and lighting work.
- Cathodic constuction
- Real way construction
- Lot of carious electrical works

graphite mold advantages:

1. No need for external welding machine.
2. Virtually maintenance free.
3. A smooth metal connection that will not loosen or corrode.
4. Use only lightweight and cheap equipment.
5. It is not affected by high current surge or over current.

26
Weld powder
Weight (g) Ordering referance

15 MP - 15
25 MP - 25
32 MP - 32
45 MP - 45
65 MP - 65
90 MP - 90
115 MP - 115
150 MP - 150
200 MP - 200
250 MP - 250

Weld accessories

Handle clamp Moulds card cloth brush

For opening and Head resistance graphite For cleaning of the

closing the mould. block, a enough to weld conductor before
(MMHC & MLHC) 80-100 shats welding. (MCB)

mould brush Ignition lighter mould scraper

For cleaning the inner For safe and quick For removing easily
part of the mould. ignition of the starting the accumulated stags
(MMB) powder. (MMS)
(MIL)

27
 Step 1

When using insulated cables, remove 150mm

of the isolation of the conductor and all the dust
Step 2 and oxydes is to cleaned properly by mould brush,
and/or cardcloth brush
Connect the handle clamp to the hole and
separate the two arms to open the mould, then
fit the conductors and leave 5 - 6mm gap on the
other conductor
Step 3
Preheat the welding mould with a welding
torch or ignite a box of weld powder in order to
remove the moisture before starting the first weld

Step 4
Close the mould with the handle clamp and
put the steel disc on the tap hole, the conical side
of the disc should be at the bottom

Welding Step 5
Pour the weld powder, which is on the upper
portion of the powder box, into the crucible
Instruction
On the bottom of the powder canister, you can see
the ignition powder, put it on the lip of the crucible
and on the top of the weld powder for easy ignition
Step 6
Ignite the flint ignitor from aside the ignition
powder. pull away the flint ignitor once it ignited to
avoid damage

Step 7 After one minute, separate the two arms of the

handle clamp to open completely the mould in order
for the welded parts tube to be removed. extra care
should be taken so as not to damaged the mould

Clean completely the mould by using mould

Step 8 scraper and by mould brush, you can continue
welding as long as the mould is still warm

Step 9

28
Cable to cable connection

Horizontal tee Horizontal straight

A (mm2) B (mm2) Clamp Powder (g) A (mm2) B (mm2) Clamp Powder (g)
25 MMHC 45 25 25 MMHC 32
25 35 MMHC 45 25 MMHC 45
35
50 MMHC 45 35 MMHC 45
25 MMHC 45 25 MMHC 45
35 MMHC 45 50 35 MMHC 45
35 50 MMHC 65 50 MMHC 45
70 MMHC 65 25 MMHC 45
25 MMHC 65 70 35 MMHC 45
35 MMHC 65 50 MMHC 65
50 50 MMHC 90 70 MMHC 65
70 MMHC 90 25 MMHC 65
95 MMHC 90 95 35 MMHC 65
25 MMHC 65 50 MMHC 90
35 MMHC 65 70 MMHC 90
50 MMHC 90 95 MMHC 90
70
70 MMHC 90 25 MMHC 65
95 MMHC 90 35 MMHC 65
120
120 MMHC 115 50 MMHC 90
25 MMHC 90 70 MMHC 90
35 MMHC 90 95 MMHC 90
50 MMHC 90 120 MMHC 115
95 70 MMHC 90 25 MMHC 90
95 MMHC 115 35 MMHC 90
120 MMHC 115 50 MMHC 90
150
150 MMHC 115 70 MMHC 90
25 MMHC 90 95 MMHC 115
35 MMHC 90 120 MMHC 115
50 MMHC 90 150 MMHC 115
70 MMHC 90 25 MMHC 90
120
95 MMHC 115 35 MMHC 90
120 MMHC 150 50 MMHC 90
150 MMHC 150 185 70 MMHC 90
185 MMHC 150 95 MMHC 115
25 MMHC 90 120 MMHC 150
35 MMHC 115 150 MMHC 150
50 MMHC 115 185 MMHC 150
70 MMHC 115
150 95 MMHC 150
120 MMHC 150
Ordering referance:
150 MMHC 200
185 MMHC 200 MCCS - A - B
25 MMHC 115
35 MMHC 115 Cable size Cable size
50 MMHC 115
70 MMHC 150
185
95 MMHC 150
120 MMHC 200
150 MMHC 200
185 MMHC 200

Ordering referance:

MCCHT - A - B

Cable size Cable size

29
Horizontal double Horizontal cross
A (mm2) B (mm2)
2 2
Clamp Powder (g) A (mm ) B (mm ) Clamp Powder (g)
25 MMHC 65 25 MMHC 65
35 MMHC 65 35 MMHC 65
25 50 MMHC 90 25 50 MMHC 90
70 MMHC 90 70 MMHC 90
95 MMHC 90 95 MMHC 90
120 MMHC 115 120 MMHC 115
25 MMHC 90 25 MMHC 90
35 MMHC 90 35 MMHC 90
50 MMHC 90 50 MMHC 90
35 70 MMHC 90 35 70 MMHC 90
95 MMHC 115 95 MMHC 115
120 MMHC 115 120 MMHC 115
150 MMHC 115 150 MMHC 115
25 MMHC 90 25 MMHC 90
35 MMHC 90 35 MMHC 90
50 MMHC 90 50 MMHC 90
70 MMHC 90 70 MMHC 90
50 95 MMHC 115 50 95 MMHC 115
120 MMHC 150 120 MMHC 150
150 MMHC 150 150 MMHC 150
185 MMHC 150 185 MMHC 150
25 MMHC 90 25 MMHC 90
35 MMHC 115 35 MMHC 115
50 MMHC 115 50 MMHC 115
70 70 MMHC 115 70 MMHC 115
70
95 MMHC 150 95 MMHC 150
120 MMHC 150 120 MMHC 150
150 MMHC 200 150 MMHC 200
185 MMHC 200 185 MMHC 200
25 MMHC 115 25 MMHC 115
35 MMHC 115 35 MMHC 115
50 MMHC 115 50 MMHC 115
70 MMHC 150 70 MMHC 150
95 95
95 MMHC 150 95 MMHC 150
120 MMHC 200 120 MMHC 200
150 MMHC 200 150 MMHC 200
185 MMHC 200 185 MMHC 200
25 MMHC 115 25 MMHC 115
35 MMHC 115 35 MMHC 115
50 MMHC 150 50 MMHC 150
70 MMHC 150 70 MMHC 150
120 95 MMHC 200 120 95 MMHC 200
120 MMHC 200 120 MMHC 200
150 MMHC 200 150 MMHC 200
185 MMHC 250 185 MMHC 250
35 MMHC 150 35 MMHC 150
50 MMHC 200 50 MMHC 200
70 MMHC 200 70 MMHC 200
95 MMHC 200 150 95 MMHC 200
150 120 MMHC 250 120 MMHC 250
150 MMHC 250 150 MMHC 250
185 MMHC 150×2 185 MMHC 150×2
35 MMHC 200 35 MMHC 200
50 MMHC 250 50 MMHC 250
70 MMHC 250 70 MMHC 250
185 95 MMHC 250 185 95 MMHC 250
120 MMHC 250 120 MMHC 250
150 MMHC 250 150 MMHC 250
185 MMHC 250 185 MMHC 250
Ordering referance: Ordering referance:

MCCPH - A - B MCCHX - A - B
Cable size Cable size Cable size Cable size

30
 Vertical tee Horizontal cross tap
2 2
A (mm2) B (mm2) Clamp Powder (g) A (mm ) B (mm ) Clamp Powder (g)

25 MMHC 45 25 MMHC 90
25 35 MMHC 45 35 MMHC 115
50 MMHC 45 50 MMHC 115
25 MMHC 45 25 70 MMHC 115
35 MMHC 45 95 MMHC 150
35 120 MMHC 150
50 MMHC 65
70 MMHC 65 150 MMHC 200
25 MMHC 65 185 MMHC 200
35 MMHC 65 25 MMHC 115
50 50 MMHC 90 35 MMHC 115
70 MMHC 90 50 MMHC 115
95 MMHC 90 35 70 MMHC 150
25 MMHC 65 95 MMHC 150
35 MMHC 65 120 MMHC 200
50 MMHC 90 150 MMHC 200
70 185 MMHC 200
70 MMHC 90
95 MMHC 90 25 MMHC 115
120 MMHC 115 35 MMHC 115
25 MMHC 90 50 MMHC 150
35 MMHC 90 70 MMHC 150
50 95 MMHC 200
50 MMHC 90
95 70 MMHC 90 120 MMHC 200
95 MMHC 115 150 MMHC 200
120 MMHC 115 185 MMHC 250
150 MMHC 115 35 MMHC 150
25 MMHC 90 50 MMHC 200
35 MMHC 90 70 MMHC 200
50 MMHC 90 70 95 MMHC 200
70 MMHC 90 120 MMHC 250
120 150 MMHC 250
95 MMHC 115
120 MMHC 150 185 MMHC 150×2
150 MMHC 150 35 MMHC 200
185 MMHC 150 50 MMHC 250
25 MMHC 90 70 MMHC 250
95 95 MMHC 250
35 MMHC 115
50 MMHC 115 120 MMHC 250
70 MMHC 115 150 MMHC 250
150 185 MMHC 250
95 MMHC 150
120 MMHC 150 50 MLHC 200
150 MMHC 200 70 MLHC 250
185 MMHC 200 95 MLHC 150×2
120 120 MLHC 150×2
25 MMHC 115
35 MMHC 115 150 MLHC 200×2
50 MMHC 115 185 MLHC 200×2
70 MMHC 150 50 MLHC 250
185 95 MMHC 150 70 MLHC 150×2
120 MMHC 200 95 MLHC 150×2
150 MMHC 200 150 120 MLHC 200×2
185 MMHC 200 150 MLHC 200×2
185 MLHC 200×2
70 MLHC 200×2
95 MLHC 200×2
Ordering referance: 120 MLHC 250×2
185
150 MLHC 250×2
185 MLHC 250×2
MCCVT - A - B
Ordering referance:
Cable size Cable size

MCCHOX - A - B
Cable size Cable size

31
Cable to rod / rod to rod connection

Horizontal one side Horizontal top tee

2
A (mm) B (mm ) Clamp Powder (g) A (mm) B (mm2) Clamp Powder (g)
25 MMHC 65 25 MMHC 90
35 MMHC 65 35 MMHC 90
50 MMHC 90 50 MMHC 90
70 MMHC 90 70 MMHC 115
14.3 95 MMHC 90 14.3 95 MMHC 115
120 MMHC 90 120 MMHC 150
150 MMHC 115 150 MMHC 200
185 MMHC 115 185 MMHC 200
25 MMHC 65 25 MMHC 90
35 MMHC 65 35 MMHC 90
50 MMHC 90 50 MMHC 90
70 MMHC 90 70 MMHC 115
14.6 95 MMHC 90 14.6 95 MMHC 115
120 MMHC 90 120 MMHC 150
150 MMHC 115 150 MMHC 200
185 MMHC 115 185 MMHC 200
25 MMHC 65 25 MMHC 90
35 MMHC 65 35 MMHC 90
50 MMHC 90 50 MMHC 90
70 MMHC 90 70 MMHC 115
5/8 95 MMHC 90 5/8 95 MMHC 115
120 MMHC 90 120 MMHC 150
150 MMHC 115 150 MMHC 200
185 MMHC 115 185 MMHC 200
25 MMHC 90 25 MMHC 90
35 MMHC 90 35 MMHC 90
50 MMHC 90 50 MMHC 115
18.3 70 MMHC 90 18.3 70 MMHC 115
95 MMHC 90 95 MMHC 115
120 MMHC 90 120 MMHC 150
150 MMHC 115 150 MMHC 200
185 MMHC 115 185 MMHC 200
25 MMHC 90 25 MMHC 90
35 MMHC 90 35 MMHC 90
50 MMHC 90 50 MMHC 115
70 MMHC 90 70 MMHC 115
3/4 3/4
95 MMHC 90 95 MMHC 115
120 MMHC 90 120 MMHC 150
150 MMHC 115 150 MMHC 200
185 MMHC 115 185 MMHC 200

Ordering referance: Ordering referance:

MCRL - A - B MCRT - A - B

Rod size Cable size Rod size Cable size

28
32
 Horizontal cross side Vertical straight
2
A (mm) B (mm ) Clamp Powder (g) A (mm) B (mm2) Clamp Powder (g)
25 MMHC 90 25 MMHC 65
35 MMHC 90 35 MMHC 65
50 MMHC 115 50 MMHC 90
70 MMHC 115 70 MMHC 90
14.3 95 MMHC 115 14.3 95 MMHC 90
120 MMHC 150 120 MMHC 90
150 MMHC 150 150 MMHC 115
185 MMHC 250 185 MMHC 115
25 MMHC 90 25 MMHC 65
35 MMHC 90 35 MMHC 65
50 MMHC 115 50 MMHC 90
70 MMHC 115 70 MMHC 90
14.6 95 MMHC 115 14.6 95 MMHC 90
120 MMHC 150 120 MMHC 90
150 MMHC 150 150 MMHC 115
185 MMHC 250 185 MMHC 115
25 MMHC 90 25 MMHC 65
35 MMHC 90 35 MMHC 65
50 MMHC 115 50 MMHC 90
70 MMHC 115 70 MMHC 90
5/8 95 MMHC 115 5/8 95 MMHC 90
120 MMHC 150 120 MMHC 90
150 MMHC 150 150 MMHC 115
185 MMHC 250 185 MMHC 115
25 MMHC 90 25 MMHC 90
35 MMHC 90 35 MMHC 90
50 MMHC 115 50 MMHC 90
18.3 70 MMHC 150 18.3 70 MMHC 90
95 MMHC 150 95 MMHC 90
120 MMHC 200 120 MMHC 90
150 MMHC 250 150 MMHC 115
185 MMHC 150×2 185 MMHC 115
25 MMHC 90 25 MMHC 90
35 MMHC 90 35 MMHC 90
50 MMHC 115 50 MMHC 90
70 MMHC 150 70 MMHC 90
3/4 3/4
95 MMHC 150 95 MMHC 90
120 MMHC 200 120 MMHC 90
150 MMHC 250 150 MMHC 115
185 MMHC 150×2 185 MMHC 115

Ordering referance: Ordering referance:

MCROX - A - B MCRS - A - B

Rod size Cable size Rod size Cable size

33
Vertical one side Vertical parallel
A (mm) B (mm2) Clamp Powder (g) Conductor size Powder (g) Clamp
mm
25 MMHC 90
35 MMHC 90 14.3 200 MMHC
50 MMHC 115 14.6 200 MMHC
70 MMHC 150 5/8 200 MMHC
14.3 95 MMHC 150 18.3 150×2 MMHC
120 MMHC 200 3/4 150×2 MMHC
150 MMHC 250
185 MMHC 150×2
25 MMHC 90
35 MMHC 90 Ordering referance:
50 MMHC 115
70 MMHC 150
14.6 95 MMHC 150 MRR - A
120 MMHC 200
150 MMHC 250
185 MMHC 150×2
Rod size
25 MMHC 90
35 MMHC 90
50 MMHC 115
70 MMHC 150
5/8 95 MMHC 200
120 MMHC 200
150 MMHC 250
185 MMHC 150×2
25 MMHC 90
35 MMHC 90
50 MMHC 115
18.3 70 MMHC 150
95 MMHC 200
120 MMHC 200
150 MMHC 250
185 MMHC 150×2
25 MMHC 90
3/4
35 MMHC 90

Ordering referance:

MCROP - A - B

Rod size Cable size

34
Cable to concrete steel re-bar connection

Horizontal cross tap Horizontal tee

2
A (mm) B (mm ) Clamp Powder (g) A (mm) B (mm2) Clamp Powder (g)
25 MMHC 90 25 MMHC 90
35 MMHC 90 35 MMHC 90
10 50 MMHC 115 10 50 MMHC 115
70 MMHC 150 70 MMHC 150
95 MMHC 150 95 MMHC 150
25 MLHC 115 25 MMHC 150
35 MLHC 115 35 MMHC 150
50 MLHC 150 50 MMHC 150
16 70 MLHC 150 16 70 MMHC 150
95 MLHC 200 95 MMHC 200
120 MLHC 200 120 MMHC 200
150 MLHC 200 150 MMHC 250
25 MLHC 115 25 MMHC 150
35 MLHC 115 35 MMHC 150
50 MLHC 150 50 MMHC 200
70 MLHC 150 70 MMHC 200
20 95 MLHC 200 20 95 MMHC 200
120 MLHC 200 120 MMHC 250
150 MLHC 250 150 MMHC 250
185 MLHC 250 185 MMHC 150×2
240 MLHC 150×2 240 MLHC 200×2

Ordering referance: Ordering referance:

MCBHOX - A - B MCBHT - A - B

Bar size Cable size Bar size Cable size

35
Single parallel Vertical cross
A (mm) B (mm2) Clamp Powder (g) A (mm) B (mm2) Clamp Powder (g)
25 MMHC 90 25 MMHC 90
35 MMHC 90 35 MMHC 90
10 50 MMHC 115 10 50 MMHC 115
70 MMHC 115 70 MMHC 150
95 MMHC 150 95 MMHC 150
25 MMHC 90 25 MMHC 115
35 MMHC 90 35 MMHC 115
50 MMHC 115 50 MMHC 150
16 70 MMHC 115 16 70 MMHC 150
95 MMHC 150 95 MMHC 200
120 MMHC 150 120 MMHC 200
150 MMHC 200 150 MMHC 200
25 MMHC 90 25 MMHC 115
35 MMHC 90 35 MMHC 115
50 MMHC 115 50 MMHC 150
70 MMHC 115 70 MMHC 150
20 95 MMHC 150 20 95 MMHC 200
120 MMHC 150 120 MMHC 200
150 MMHC 200 150 MMHC 250
185 MMHC 250 185 MMHC 250
240 MMHC 250 240 MMHC 150×2

Ordering referance: Ordering referance:

MCBOP - A - B MCBVOX - A - B

Bar size Cable size Bar size Cable size

36
 Vertical tee Horizontal cross side
2
A (mm) B (mm ) Clamp Powder (g) A (mm) B (mm2) Clamp Powder (g)
25 MMHC 90 25 MMHC 90
35 MMHC 90 35 MMHC 90
50 MMHC 115 10 50 MMHC 115
10 70 MMHC 115 70 MMHC 115
95 MMHC 150 95 MMHC 150
120 MMHC 150 25 MMHC 90
150 MMHC 200 35 MMHC 90
25 MMHC 150 50 MMHC 115
35 MMHC 150 16 70 MMHC 115
50 MMHC 150 95 MMHC 150
16 70 MMHC 150 120 MMHC 150
95 MMHC 200 150 MMHC 200
120 MMHC 200 25 MMHC 90
150 MMHC 250 35 MMHC 90
25 MMHC 150 50 MMHC 115
35 MMHC 150 70 MMHC 115
50 MMHC 200 20 95 MMHC 150
70 MMHC 200 120 MMHC 150
20 95 MMHC 200 150 MMHC 200
120 MMHC 250 185 MMHC 250
150 MMHC 250 240 MLHC 200×2
185 MMHC 150×2
240 MMHC 200×2

Ordering referance:
Ordering referance:

MCBHOX - A - B
MCBVT - A - B
Bar size Cable size
Bar size Cable size

37
Cable to steel surface and cable to steel pipe connection

Inclined straight Horizontal single Descending single

2 2
A (mm ) Clamp Powder (g) A (mm ) Clamp Powder (g) A (mm2) Clamp Powder (g)
25 MMHC 45 25 MMHC 45 25 MMHC 45
35 MMHC 45 35 MMHC 65 35 MMHC 65
50 MMHC 90 50 MMHC 90 50 MMHC 90
70 MMHC 90 70 MMHC 90 70 MMHC 90
95 MMHC 115 95 MMHC 115 95 MMHC 115
120 MMHC 115 120 MMHC 115 120 MMHC 115
150 MMHC 150 150 MMHC 150 150 MMHC 150
185 MMHC 200 185 MMHC 200 185 MMHC 200

Ordering referance: Ordering referance: Ordering referance:

MCPSVI - A MCPSH - A MCPSV - A

Cable size Cable size Cable size

Vertical double Vertical parallel Horizontal double

2 2
A (mm ) Clamp Powder (g) A (mm ) Clamp Powder (g) A (mm2) Clamp Powder (g)
25 MMHC 45 25 MMHC 90 25 MMHC 65
35 MMHC 65 35 MMHC 115 35 MMHC 90
50 MMHC 90 50 MMHC 150 50 MMHC 90
70 MMHC 90 70 MMHC 200 70 MMHC 115
95 MMHC 115 95 MMHC 250 95 MMHC 115
120 MMHC 115 120 MMHC 250 120 MMHC 150
150 MMHC 150 150 MLHC 150×2 150 MMHC 200
185 MMHC 200 185 MLHC 150×2 185 MMHC 250

Ordering referance: Ordering referance: Ordering referance:

MCPDVH - A MCPDVV - A MCPDHH - A

Cable size Cable size Cable size

38
One side single Ascending single Horizontal single pipe
2 2
A (mm ) Clamp Powder (g) A (mm ) Clamp Powder (g) A (mm2) Clamp Powder (g)
25 MMHC 65 25 MMHC 65 10 MSC 15
35 MMHC 90 35 MMHC 90 16 MSC 15
50 MMHC 90 50 MMHC 115 25 MSC 25
70 MMHC 115 70 MMHC 150 35 MSC 32
95 MMHC 115 95 MMHC 200 50 MSC 45
120 MMHC 150 120 MMHC 200 70 MSC 65
150 MMHC 200 150 MMHC 250
185 MMHC 250 185 MLHC 150×2
240 MMHC 150×2 240 MLHC 150×2
Ordering referance:
Ordering referance: Ordering referance: MCTSHH - A
MCPSVH - A MCPSVV - A Cable size
Cable size Cable size

39
Cable to copper tape connection

Descending tee Horizontal cable tee

A (mm2) B (mm) Clamp Powder (g) A (mm2) B (mm) Clamp Powder (g)
20×2 MMHC 65 20×2 MMHC 45
20×3 MMHC 90 25 20×3 MMHC 45
25
25×3 MMHC 90 20×2 MMHC 45
30×3 MMHC 115 35 20×3 MMHC 45
20×3 MMHC 115 25×3 MMHC 65
25×3 MMHC 115 20×2 MMHC 45
35
30×3 MMHC 115 50 20×3 MMHC 65
40×3 MMHC 115 25×3 MMHC 90
20×3 MMHC 115 20×2 MMHC 65
25×3 MMHC 115 20×3 MMHC 90
50 70
30×3 MMHC 115 25×3 MMHC 90
40×3 MMHC 115 30×3 MMHC 115
20×3 MMHC 115 20×3 MMHC 115
25×3 MMHC 150 25×3 MMHC 150
70 95
30×3 MMHC 150 30×3 MMHC 150
40×3 MMHC 150 40×3 MMHC 150
20×3 MMHC 150 20×3 MMHC 150
25×3 MMHC 150 25×3 MMHC 150
95 120
30×3 MMHC 200 30×3 MMHC 200
40×3 MMHC 200 40×3 MMHC 200
25×3 MMHC 200 25×3 MMHC 200
120 30×3 MMHC 200 150 30×3 MMHC 200
40×3 MMHC 250 40×3 MMHC 250
30×3 MMHC 200 30×3 MMHC 200
150 185
40×3 MMHC 250 40×3 MMHC 250
30×3 MMHC 250
185 40×3 MMHC 150×2
Ordering referance:
Ordering referance:

MTCHT - A - B
MCTVOT - A - B
Cable size Copper tape size
Cable size Copper tape size

40
 Vertical tee Horizontal tape tee
2
A (mm ) B (mm) Clamp Powder (g) A (mm2) B (mm) Clamp Powder (g)
20×2 MMHC 45 20×2 MMHC 32
25
25 20×3 MMHC 65 20×3 MMHC 45
25×3 MMHC 90 20×2 MMHC 45
20×2 MMHC 65 35 20×3 MMHC 45
20×3 MMHC 90 25×3 MMHC 45
35
25×3 MMHC 90 20×2 MMHC 45
30×3 MMHC 115 50 20×3 MMHC 45
20×3 MMHC 115 25×3 MMHC 65
25×3 MMHC 115 20×2 MMHC 45
50
30×3 MMHC 115 70 20×3 MMHC 65
40×3 MMHC 115 25×3 MMHC 90
20×3 MMHC 115 20×3 MMHC 65
25×3 MMHC 115 95 25×3 MMHC 90
70
30×3 MMHC 115 30×3 MMHC 90
40×3 MMHC 115 40×3 MMHC 115
20×3 MMHC 115 20×3 MMHC 115
25×3 MMHC 150 25×3 MMHC 115
95 120
30×3 MMHC 150 30×3 MMHC 115
40×3 MMHC 150 40×3 MMHC 115
20×3 MMHC 150 20×3 MMHC 115
25×3 MMHC 150 25×3 MMHC 115
120 150
30×3 MMHC 200 30×3 MMHC 115
40×3 MMHC 200 40×3 MMHC 115
25×3 MMHC 200 20×3 MMHC 115
150 30×3 MMHC 200 25×3 MMHC 150
185
40×3 MMHC 250 30×3 MMHC 150
30×3 MMHC 200 40×3 MMHC 150
185
40×3 MMHC 250

Ordering referance:
Ordering referance:

MCTHT - A - B
MCTVT - A - B
Cable size Copper tape size
Cable size Copper tape size

41
Straight width

A (mm2) B (mm) Clamp Powder (g)

20×2 MMHC 32
25
20×3 MMHC 45
20×2 MMHC 45
35 20×3 MMHC 45
25×3 MMHC 45
20×2 MMHC 45
50 20×3 MMHC 45
25×3 MMHC 65
20×2 MMHC 45
70 20×3 MMHC 65
25×3 MMHC 90
20×2 MMHC 65
95 20×3 MMHC 90
25×3 MMHC 90
30×3 MMHC 115
20×3 MMHC 115
25×3 MMHC 115
120
30×3 MMHC 115
40×3 MMHC 115
20×3 MMHC 115
25×3 MMHC 115
150
30×3 MMHC 115
40×3 MMHC 115
20×3 MMHC 115
25×3 MMHC 150
185
30×3 MMHC 150
40×3 MMHC 150

Ordering referance:

MCTS - A - B

Cable size Copper tape size

42
Busbar to busbar connection

Straight height Horizontal tee Vertical angle

Conductor size Clamp Powder (g) Conductor size Clamp Powder (g) Conductor size Clamp Powder (g)
mm mm mm
20×2 MMHC 45 20×2 MMHC 45 20×2 MMHC 45
20×3 MMHC 45 20×3 MMHC 65 20×3 MMHC 45
25×3 MMHC 65 25×3 MMHC 65 25×3 MMHC 65
30×3 MMHC 90 30×3 MMHC 90 30×3 MMHC 90
40×3 MMHC 115 40×3 MMHC 115 40×3 MMHC 115

Ordering referance: Ordering referance: Ordering referance:

MTTHS - A MTTHT - A MTTVL - A

Copper tape size Copper tape size Copper tape size

Vertical straight Upside down Vertical tee

Conductor size Clamp Powder (g) Conductor size Clamp Powder (g) Conductor size Clamp Powder (g)
mm mm mm
20×2 MMHC 65 20×2 MMHC 115 20×2 MMHC 45
20×3 MMHC 65 20×3 MMHC 115 20×3 MMHC 65
25×3 MMHC 90 25×3 MMHC 150 25×3 MMHC 90
30×3 MMHC 115 30×3 MMHC 200 30×3 MMHC 90
40×3 MMHC 150 40×3 MMHC 250 40×3 MMHC 115

Ordering referance: Ordering referance: Ordering referance:

MTTVS - A MTTVUT - A MTTVDT - A

Copper tape size Copper tape size Copper tape size

43
Horizontal cross Straight width Branch height
Conductor size Clamp Powder (g) Conductor size Clamp Powder (g) Conductor size Clamp Powder (g)
mm mm mm
20×2 MMHC 45 20×2 MMHC 45 20×2 MMHC 90
20×3 MMHC 65 20×3 MMHC 45 20×3 MMHC 90
25×3 MMHC 65 25×3 MMHC 65 25×3 MMHC 90
30×3 MMHC 90 30×3 MMHC 90 30×3 MMHC 115
40×3 MMHC 115 40×3 MMHC 150 40×3 MMHC 115

Ordering referance: Ordering referance: Ordering referance:

MTTHOX - A MTTS - A MTTHP - A

Copper tape size Copper tape size Copper tape size

Information

Conductor size CONCRETE STEEL RE - BAR

Conductor size Number of wires Overall diameter Nominal size Overall diameter
per diameter
6 mm 7.20mm
10 mm2 7 x 1.35mm 4.10mm 8 mm 9.60mm
2
16 mm 7 x1.70mm 5.10mm 10 mm 12.00mm
2
25 mm 7 x 2.10mm 6.30mm 12 mm 14.40mm

35 mm2 7 x 2.50mm 7.50mm 14 mm 16.80mm

50 mm2 19 x1.80mm 9.00mm 16 mm 19.20mm

20 mm 24.00mm
70 mm2 19 x 2.10mm 10.50mm
25 mm 30.00mm
95 mm2 19 x 2.52mm 12.50mm
2
32 mm 38.40mm
120 mm 19 x 2.80mm 14.00mm

150 mm2 37 x 2.25mm 15.70mm

2
185 mm 37 x 2.50mm 17.50mm

240 mm2 61 x 2.25mm 20.20mm

300 mm2 61 x 2.50mm 22.50mm

400 mm2 61 x 2.89mm 26.00mm

500 mm2 61 x 3.23mm 29.10mm

44
45
Cable Lugs
Connectors
Termination

46
Compression cable lugs

Conductor Dimension Ordering

area (mm2) E A C B D P2 P1 L referance

6 6 .5 3 .8 5 .5 9 11 6 6 24 MC CL- 6 06
10 5 .5 4 .5 7 10 12 7 .5 6 .5 2 8.5 MC CL- 10 05
10 6 .5 4 .5 7 10 12 7 .5 6 .5 3 1.5 MC CL- 10 06
10 8 .5 4 .5 7 10 15 10 10 35 MC CL- 10 08
16 5 .5 5 .5 8 .5 13 12 6 .5 5 .5 3 1.5 MC CL- 16 05
16 6 .5 5 .5 8 .5 13 12 7 .5 6 .25 3 3.2 5 MC CL- 16 06
16 8 .5 5 .5 8 .5 13 15 9 .5 8 .5 3 7.5 MC CL- 16 08
25 5 .5 7 10 15 14 7 .5 7 .5 3 7.5 MC CL- 25 05
25 6 .5 7 10 15 14 7 .5 7 .5 3 7.5 MC CL- 25 06
25 8 .5 7 10 15 16 10 10 42 MC CL- 25 08
25 1 0.5 7 10 15 18 12 12 46 MC CL- 25 10
35 6 .5 8 .5 12 17 17 7 .5 7 .5 3 9.5 MC CL- 35 06
35 8 .5 8 .5 12 17 17 10 10 44 MC CL- 35 08
35 1 0.5 8 .5 12 17 19 12 12 49 MC CL- 35 10
50 6 .5 10 14 19 20 10 10 47 MC CL- 50 06
50 8 .5 10 14 19 20 10 10 47 MC CL- 50 08
50 1 0.5 10 14 19 20 12 12 51 MC CL- 50 10
70 6 .5 12 1 6.5 21 23 10 10 53 MC CL- 70 06
70 8 .5 12 1 6.5 21 23 10 10 53 MC CL- 70 08
70 1 0.5 12 1 6.5 21 23 12 12 56 MC CL- 70 10
70 13 12 1 6.5 21 23 13 13 59 MC CL- 70 13
70 15 12 1 6.5 21 23 14 14 62 MC CL- 70 15
95 8 .5 1 3.5 18 25 26 12 12 60 MC CL- 95 08
95 1 0.5 1 3.5 18 25 26 12 12 60 MC CL- 95 10
95 13 1 3.5 18 25 26 13 13 62 MC CL- 95 13
95 15 1 3.5 18 25 26 1 4.5 1 4.5 6 5.5 MC CL- 95 15
1 20 8 .5 15 1 9.5 26 28 14 14 65 MC CL- 12 0 08
1 20 1 0.5 15 1 9.5 26 28 14 14 65 MC CL- 12 0 10
1 20 13 15 1 9.5 26 28 14 14 65 MC CL- 12 0 13
1 20 15 15 1 9.5 26 28 15 15 67 MC CL- 12 0 15
1 50 8 .5 1 6.5 21 30 31 14 14 70 MC CL- 15 0 08
1 50 1 0.5 1 6.5 21 30 31 14 14 70 MC CL- 15 0 10
1 50 13 1 6.5 21 30 31 15 15 72 MC CL- 15 0 13
1 50 15 1 6.5 21 30 31 15 15 72 MC CL- 15 0 15
1 50 17 1 6.5 21 30 31 16 16 74 MC CL- 15 0 17
1 85 1 0.5 19 24 30 35 18 18 83 MC CL- 18 5 10
1 85 13 19 24 30 35 18 18 83 MC CL- 18 5 13
1 85 15 19 24 30 35 18 18 83 MC CL- 18 5 15
1 85 17 19 24 30 35 18 18 83 MC CL- 18 5 17
2 40 1 0.5 21 26 35 39 19 2 1.5 9 3.5 MC CL- 24 0 10
2 40 13 21 26 35 39 19 2 1.5 9 3.5 MC CL- 24 0 13
2 40 15 21 26 35 39 19 2 1.5 9 3.5 MC CL- 24 0 15
2 40 17 21 26 35 39 19 2 1.5 9 3.5 MC CL- 24 0 17
2 40 21 21 26 35 39 19 2 1.5 9 3.5 MC CL- 24 0 21
3 00 13 2 3.5 2 9.5 44 43 24 24 1 11 MC CL- 30 0 13
3 00 15 2 3.5 2 9.5 44 43 24 24 1 11 MC CL- 30 0 15
3 00 17 2 3.5 2 9.5 44 43 24 24 1 11 MC CL- 30 0 17
3 00 21 2 3.5 2 9.5 44 43 24 24 1 11 MC CL- 30 0 21
4 00 13 27 34 44 49 24 24 1 14 MC CL- 40 0 13
4 00 15 27 34 44 49 24 24 1 14 MC CL- 40 0 15
4 00 17 27 34 44 49 24 24 1 14 MC CL- 40 0 17
4 00 21 27 34 44 49 24 24 1 14 MC CL- 40 0 21
5 00 15 2 9.5 3 8.5 44 53 24 24 1 19 MC CL- 50 0 15
5 00 17 2 9.5 3 8.5 44 53 24 24 1 19 MC CL- 50 0 17
5 00 21 2 9.5 3 8.5 44 53 24 24 1 19 MC CL- 50 0 21
6 30 15 35 45 56 65 33 33 1 44 MC CL- 63 0 15
6 30 16 35 45 56 65 33 33 1 44 MC CL- 63 0 16
6 30 17 35 45 56 65 33 33 1 44 MC CL- 63 0 17
6 30 20 35 45 56 65 33 33 1 44 MC CL- 63 0 20
6 30 21 35 45 56 65 33 33 1 44 MC CL- 63 0 21

47
Heavy duty compression cable lugs

Conductor Dimension Ordering

area (mm2) E A C B D H G J referance

25 8 .5 7 10 18 16 10 10 45 MH CCL- 2 5 08 H
35 8 .5 8 .5 12 20 17 10 10 47 MH CCL- 3 5 08 H
50 8 .5 10 14 25 20 10 10 53 MH CCL- 5 0 08 H
70 1 0.5 12 1 6.5 30 23 12 12 65 MH CCL- 7 0 10 H
95 13 1 3.5 18 37 26 13 13 74 MH CCL- 9 5 13 H
1 20 13 15 1 9.5 38 28 14 14 77 MH CCL- 1 20 1 3H
1 50 13 1 6.5 21 42 31 15 15 84 MH CCL- 1 50 1 3H
1 85 13 19 24 45 35 18 18 98 MH CCL- 1 85 1 3H
2 40 17 21 26 53 39 19 2 1.5 1 11. 5 MH CCL- 2 40 1 7H
3 00 17 2 3.5 2 9.5 62 43 24 24 1 29 MH CCL- 3 00 1 7H
4 00 21 27 34 64 49 24 24 1 34 MH CCL- 4 00 2 1H

Long barrel compression cable lugs

Conductor Dimension Ordering

area (mm2) E A C J B D H G referance

6 6 .5 3 .8 5 .5 20 11 11 6 6 ML CCL- 6 06
10 8 .5 4 .5 7 26 11 15 10 10 ML CCL- 1 0 08
16 8 .5 5 .5 8 .5 31 15 15 9 .5 8 .5 ML CCL- 1 6 08
25 8 .5 7 10 32 15 16 10 10 ML CCL- 2 5 08
35 8 .5 8 .5 12 34 17 17 10 10 ML CCL- 3 5 08
50 1 0.5 10 14 40 20 20 12 12 ML CCL- 5 0 10
70 13 12 1 6.5 47 22 23 13 13 ML CCL- 7 0 13
95 13 1 3.5 18 49 25 26 13 13 ML CCL- 9 5 13
1 20 13 15 1 9.5 52 27 28 14 14 ML CCL- 1 20 1 3
1 50 13 1 6.5 21 59 32 31 15 15 ML CCL- 1 50 1 3
1 85 13 19 24 74 39 35 18 18 ML CCL- 1 85 1 3
2 40 17 21 26 83 46 39 19 2 1.5 ML CCL- 2 40 1 7
3 00 21 2 3.5 2 9.5 94 51 43 24 24 ML CCL- 3 00 2 1
4 00 21 27 34 99 53 49 24 24 ML CCL- 4 00 2 1
5 00 21 2 9.5 3 8.5 1 09 58 53 24 24 ML CCL- 5 00 2 1
6 30 21 35 45 1 15 60 65 33 33 ML CCL- 6 30 2 1

Two hole compression cable lugs

Conductor Dimension Ordering

area (mm2) E A C B D L referance

16 1 0.5 5 .4 7 .1 15 15 84 MT HCCL - 16 1 0
25 1 0.5 6 .8 8 .8 15 18 87 MT HCCL - 25 1 0
35 1 0.5 8 .2 1 0.6 17 18 90 MT HCCL - 35 1 0
50 13 9 .5 1 2.4 2 7.5 2 2.5 1 02 MT HCCL - 50 1 3
70 13 1 1.2 1 4.7 30 24 1 07 MT HCCL - 70 1 3
95 13 1 3.5 18 33 26 1 11 MT HCCL - 95 1 3
1 20 13 15 1 9.5 36 28 1 18 MT HCCL - 120 13
1 50 13 1 6.5 21 44 31 1 30 MT HCCL - 150 13
1 85 1 0.5 19 24 55 35 1 49 MT HCCL - 185 10
1 85 13 19 24 55 35 1 49 MT HCCL - 185 13
2 40 1 0.5 21 26 55 39 1 50 MT HCCL - 240 10
2 40 13 21 26 55 39 1 50 MT HCCL - 240 13
3 00 13 2 3.5 2 9.5 55 43 1 60 MT HCCL - 300 13

48
Four holes compression cable lugs

Conductor Dimension Ordering

area (mm2) E A C B D L H J referance

2 40 8 .5 21 28 45 58 35 25 1 10 F HCC L- 240 08
2 40 1 0.5 21 28 45 58 35 25 1 10 F HCC L- 240 10
3 00 8 .5 2 3.5 31 50 58 35 25 1 15 F HCC L- 300 08
3 00 1 0.5 2 3.5 31 50 58 35 25 1 15 F HCC L- 300 10
4 00 8 .5 27 3 6.5 52 58 35 25 1 20 F HCC L- 400 08
4 00 1 0.5 27 3 6.5 52 58 35 25 1 20 F HCC L- 400 10
5 00 8 .5 30 39 56 58 35 25 1 24 F HCC L- 500 08
5 00 1 0.5 30 39 56 58 35 25 1 24 F HCC L- 500 10
6 30 8 .5 34 44 66 65 35 25 1 45 F HCC L- 630 08
6 30 1 0.5 34 44 66 65 35 25 1 45 F HCC L- 630 10
8 00 8 .5 35 45 6 3.5 58 35 25 1 48 F HCC L- 800 08
8 00 1 0.5 35 45 6 3.5 58 35 25 1 48 F HCC L- 800 10
1 000 8 .5 43 5 6.5 7 8.5 90 35 25 2 50 F HCC L- 100 0 0 8
1 000 1 0.5 43 5 6.5 7 8.5 90 35 25 2 50 F HCC L- 100 0 1 0

Aluminium compression cable lugs

Conductor Dimension Ordering

area (mm2) E A C B D L referance

2 .5 3 .2 2 6 .6 4 4 18 MA CC L- 2.5 03
2 .5 3 .7 2 .6 7 4 4 18 MA CC L- 2.5 03
4 4 .2 2 .9 7 .2 4 4 18 MA CC L- 4 0 4
4 5 .2 2 .9 12 7 6 24 MA CC L- 4 0 5
6 5 .2 3 .5 7 .5 7 6 24 MA CC L- 6 0 5
6 6 .5 3 .5 12 7 6 24 MA CC L- 6 0 6
10 4 .2 3 .8 8 .4 9 8 28 MA CC L- 10 04
10 6 .4 4 .4 9 .7 9 8 30 MA CC L- 10 06
10 8 .2 4 .4 15 9 8 30 MA CC L- 10 08
16 6 .4 5 .4 1 1.4 11 9 37 MA CC L- 16 06
16 8 .2 5 .4 1 1.4 11 9 37 MA CC L- 16 08
16 1 0.2 5 .4 18 11 9 37 MA CC L- 16 10
25 6 .4 7 1 3.7 12 9 44 MA CC L- 25 06
25 8 .2 7 1 3.7 12 9 44 MA CC L- 25 08
25 1 0.2 7 20 11 10 44 MA CC L- 25 10
25 1 2.7 7 20 11 10 44 MA CC L- 25 12
35 6 .4 8 1 5.4 11 11 47 MA CC L- 35 06
35 8 .2 8 1 5.4 11 11 47 MA CC L- 35 08
35 1 0.2 8 20 11 11 47 MA CC L- 35 10
50 8 .2 9 .3 1 8.3 13 11 54 MA CC L- 50 08
50 1 0.2 9 .3 23 13 11 54 MA CC L- 50 10
50 1 2.7 9 .3 23 12 12 54 MA CC L- 50 12
70 8 .2 1 1.6 2 2.6 13 13 60 MA CC L- 70 08
70 1 0.2 1 1.6 2 2.6 13 13 60 MA CC L- 70 10
70 1 2.7 1 1.6 2 2.6 13 13 60 MA CC L- 70 12
95 1 0.2 1 2.9 2 4.5 14 14 64 MA CC L- 95 10
95 1 2.7 1 2.9 2 4.5 14 14 64 MA CC L- 95 12
95 1 6.2 1 2.9 2 4.5 14 14 64 MA CC L- 95 16
1 20 1 0.2 15 2 8.2 15 15 73 MA CC L- 120 10
1 20 1 2.7 15 2 8.2 15 15 73 MA CC L- 120 12
1 20 1 6.2 15 2 8.2 15 15 73 MA CC L- 120 16
1 50 1 0.2 1 6.5 3 0.9 17 17 79 MA CC L- 150 10
1 50 1 2.7 1 6.5 3 0.9 17 17 79 MA CC L- 150 12
1 50 1 6.2 1 6.5 3 0.9 17 17 79 MA CC L- 150 16
1 85 1 0.2 1 8.6 3 4.8 18 18 84 MA CC L- 185 10
1 85 1 2.7 1 8.6 3 4.8 18 18 84 MA CC L- 185 12
1 85 1 6.2 1 8.6 3 4.8 18 18 84 MA CC L- 185 16
2 40 1 2.7 22 40 22 22 1 02 MA CC L- 240 12
2 40 1 6.2 22 40 22 22 1 02 MA CC L- 240 16
3 00 1 6.2 24 4 5.7 27 27 1 15 MA CC L- 300 16
3 00 2 0.3 24 4 5.7 27 27 1 15 MA CC L- 300 20
4 00 2 0.3 28 51 31 30 1 30 MA CC L- 400 20
5 00 2 0.3 31 5 8.7 33 32 1 40 MA CC L- 500 20

49
Aluminium long barrel compression cable lugs
Conductor Dimension Ordering
area (mm2) E A D H G J referance
2 .5 3 .2 2 6 .6 4 4 2 1.5 MA LB C CL- 2. 5 03
2 .5 3 .7 2 .6 7 4 4 2 1.5 MA LB C CL- 2. 5 03
4 4 .2 2 .9 7 .2 4 4 2 1.5 MA LB C CL- 4 04
4 5 .2 2 .9 12 7 6 2 7.5 MA LB C CL- 4 05
6 5 .2 3 .5 7 .5 7 6 2 7.5 MA LB C CL- 6 05
6 6 .5 3 .5 12 7 6 2 7.5 MA LB C CL- 6 06
10 4 .2 3 .8 8 .4 9 8 3 4.5 MA LB C CL- 10 04
10 6 .4 4 .4 9 .7 9 8 3 4.5 MA LB C CL- 10 06
16 6 .4 5 .4 1 1.4 11 9 4 3.5 MA LB C CL- 16 06
16 8 .2 5 .4 1 1.4 11 9 4 3.5 MA LB C CL- 16 08
16 1 0.2 5 .4 18 11 9 4 3.5 MA LB C CL- 16 10
25 8 .2 7 1 3.7 12 9 52 MA LB C CL- 25 08
25 1 0.2 7 20 12 9 52 MA LB C CL- 25 10
25 1 2.7 7 20 12 9 52 MA LB C CL- 25 12
35 8 .2 8 1 5.4 11 11 56 MA LB C CL- 35 08
35 1 0.2 8 20 11 11 56 MA LB C CL- 35 10
50 8 .2 9 .3 1 8.3 13 11 65 MA LB C CL- 50 08
50 1 0.2 9 .3 23 13 11 65 MA LB C CL- 50 10
50 1 2.7 9 .3 23 13 11 65 MA LB C CL- 50 12
70 8 .2 1 1.6 2 2.6 13 13 73 MA LB C CL- 70 08
70 1 0.2 1 1.6 2 2.6 13 13 73 MA LB C CL- 70 10
70 1 2.7 1 1.6 2 2.6 13 13 73 MA LB C CL- 70 12
95 1 0.2 1 2.9 2 4.5 14 14 78 MA LB C CL- 95 10
95 1 2.7 1 2.9 2 4.5 14 14 78 MA LB C CL- 95 12
95 1 6.2 1 2.9 2 4.5 14 14 78 MA LB C CL- 95 16
1 20 1 0.2 15 28 15 15 89 MA LB C CL- 120 10
1 20 1 2.7 15 28 15 15 89 MA LB C CL- 120 12
1 20 1 6.2 15 28 15 15 89 MA LB C CL- 120 16
1 50 1 0.2 1 6.5 3 0.9 17 17 96 MA LB C CL- 150 10
1 50 1 2.7 1 6.5 3 0.9 17 17 96 MA LB C CL- 150 12
1 50 1 6.2 1 6.5 3 0.9 17 17 96 MA LB C CL- 150 16
1 85 1 0.2 1 8.5 3 4.6 18 18 1 02 MA LB C CL- 185 10
1 85 1 2.7 1 8.5 3 4.6 18 18 1 02 MA LB C CL- 185 12
1 85 1 6.2 1 8.5 3 4.6 18 18 1 02 MA LB C CL- 185 16
2 40 1 2.7 22 40 22 22 1 24 MA LB C CL- 240 12
2 40 1 6.2 22 40 22 22 1 24 MA LB C CL- 240 16
3 00 1 6.2 24 4 5.7 27 27 1 38. 5 MA LB C CL- 300 16
3 00 2 0.3 24 4 5.7 27 27 1 38. 5 MA LB C CL- 300 20
4 00 2 0.3 28 51 31 30 1 58 MA LB C CL- 400 20
5 00 2 0.3 31 5 8.7 33 32 1 70 MA LB C CL- 500 20

Aluminium compression joints

Conductor Dimension Ordering
area (mm2) C A L referance
2 .5 5 .5 2 16 MA CJ - 2. 5 0 5
2 .5 5 .5 2 .6 16 MA CJ - 2. 5 0 5
4 5 .5 2 .9 16 MA CJ - 4 05
6 5 .5 3 .5 16 MA CJ - 6 05
10 6 .2 3 .8 20 MA CJ - 10 06
10 7 .4 4 .4 20 MA CJ - 10 07
16 8 .3 5 .4 26 MA CJ - 16 08
25 9 .7 7 35 MA CJ - 25 09
35 1 0.8 8 40 MA CJ - 35 10
50 13 9 .3 45 MA CJ - 50 13
70 16 1 1.6 55 MA CJ - 70 16
95 1 7.1 1 2.9 60 MA CJ - 95 17
1 20 19 15 65 MA CJ - 12 0 19
1 50 2 1.2 1 6.5 70 MA CJ - 15 0 12
1 85 24 1 8.5 75 MA CJ - 18 5 24
2 40 2 8.6 22 90 MA CJ - 24 0 28
3 00 31 24 1 00 MA CJ - 30 0 31
4 00 36 28 1 15 MA CJ - 40 0 36
5 00 41 31 1 25 MA CJ - 50 0 41
6 25 46 36 1 40 MA CJ - 62 5 46
8 00 51 39 1 60 MA CJ - 50 0 51
1 000 57 4 3.5 2 10 MA CJ - 10 00 5 7

50
Standard barrel compression joints
Conductor Dimension Ordering
area (mm2) C A L referance
0 .75 2 .8 1 .3 20 MS B CJ - 0.7 5 0 2
1 .5 3 .3 1 .8 25 MS B CJ - 1.5 03
2 .5 4 .2 2 .3 25 MS B CJ - 2.5 04
4 5 3 25 MS B CJ - 4 5
6 6 .5 3 .5 25 MS B CJ - 6 0 6
10 7 4 .5 30 MS B CJ - 10 7
16 8 .5 5 .5 35 MS B CJ - 16 08
25 10 7 40 MS B CJ - 25 10
35 12 8 .5 45 MS B CJ - 35 12
50 14 10 50 MS B CJ - 50 14
70 1 6.5 12 55 MS B CJ - 70 16
95 18 1 3.5 60 MS B CJ - 95 18
1 20 1 9.5 15 50 MS B CJ - 120 19
1 20 1 9.5 15 65 MS B CJ - 120 19
1 50 21 1 6.5 55 MS B CJ - 150 21
1 50 21 1 6.5 70 MS B CJ - 150 21
1 85 24 19 60 MS B CJ - 185 24
1 85 24 19 75 MS B CJ - 185 24
2 25 24 20 65 MS B CJ - 225 24
2 40 26 21 65 MS B CJ - 240 26
2 40 26 21 85 MS B CJ - 240 26
3 00 2 9.5 2 3.5 75 MS B CJ - 300 29
3 00 2 9.5 2 3.5 85 MS B CJ - 300 29
3 00 2 9.5 2 3.5 1 00 MS B CJ - 300 29
4 00 34 27 90 MS B CJ - 400 34
4 00 34 27 1 00 MS B CJ - 400 34
4 00 34 27 1 20 MS B CJ - 400 34
5 00 36 30 95 MS B CJ - 500 36
5 00 39 30 1 00 MS B CJ - 500 39
5 00 39 30 1 30 MS B CJ - 500 39
6 25 4 1.5 35 1 05 MS B CJ - 625 41
6 30 45 35 1 10 MS B CJ - 630 45

Mechanical cable lugs

Wire range Stud size Dimension Ordering
(mm) L W H referance

6 - 14 awg 6 .5 27 10 13 MM S L- 6 06
2 - 140a wg 6 .5 30 13 1 4.5 MM S L- 2 06
1 /10 - 14 a wg 6 .5 37 16 20 MM S L- 1/ 10 0 6
1 /10 - 14 a wg 10 37 16 20 MM S L- 1/ 10 1 0
2 /0- 1 4 aw g 6 .5 37 16 20 MM S L- 2/ 0 06
2 /0- 1 4 aw g 1 5.5 37 16 18 MM S L- 2/ 0 15
2 50k c m il- 6 awg 8 51 25 2 8.5 MM S L- 25 0 8
2 50k c m il- 6 awg 10 51 25 2 8.5 MM S L- 25 0 1 0
3 50k c m il- 6 awg 10 57 2 8.5 32 MM S L- 35 0 1 0
3 50k c m il- 6 awg 13 57 2 8.5 32 MM S L- 35 0 1 3
Single - hole connector 5 00k c m il- 4 awg 10 7 1.5 32 40 MM S L- 50 0 1 0
( with hex screw )
5 00k c m il- 4 awg 13 7 1.5 32 40 MM S L- 50 0 1 3

Wire range Stud size Dimension Ordering

(mm) L W H referance

1/ 0- 14 awg (2 ) 6 .5 37 2 8.5 20 MM S DL -1 /0 0 6
2/ 0- 14 awg (2 ) 6 .5 37 32 20 MM S DL -2 /0 0 6
25 0k cm i l- 6 a wg( 2) 10 65 41 30 MM S DL -2 50 10
Double - hole connector 35 0k cm i l- 6aw g 13 73 49 32 MM S DL -3 50 13
( with sloted screw ) 25 0k cm i l- 6 a wg( 2) 13 81 61 40 MM S DL -2 50 13

51
Bus bar connectors

Wire range Stud size Dimension Ordering

(mm) L W H referance
6 00k c m il- 2 awg 10 1 25 38 76 MM B C2 -6 00 10
7 50k c m il- 1/ 0 a wg 10 1 25 40 76 MM B C2 -7 50 10

Double - hole connector

( with hex screw )

Wire range Stud size Dimension Ordering

(mm) L W H referance
6 00k c m il- 2 awg 10 1 25 6 3.5 76 MM B C3 -6 00 10
7 50k c m il- 1/ 0 a wg 10 1 25 72 76 MM B C3 -7 50 10

Triple - hole connector

( with hex screw )

Wire range Stud size Dimension Ordering

(mm) L W H referance
6 00k c m il- 2 awg 10 1 25 6 3.5 76 MM B C4 -6 00 10
7 50k c m il- 1/ 0 a wg 10 1 25 72 76 MM B C4 -7 50 10

Foure - hole connector

( with hex screw )

Mechanical straight connectors

Wire range Stud size Dimension Ordering

(mm) L W H referance

2 - 14 awg 16 35 13 1 4.5 MM S C- 2 16
1 /0- 1 4 aw g 22 4 8.5 19 19 MM S C- 1/ 0 22
Straight - connector 2 50k c m il- 6 awg 4 9.2 1 00 2 5.5 2 8.5 MM S C- 25 0 4 9
( with hep socket )

Straight - connector
( with slotted screw )

Mechanical parallel tap connectors

Wire range Stud size Dimension Ordering

Main Tap (mm) L W H referance

2 - 12 awg 4 - 14 awg 16 35 16 22 MM P TC -2 16
1 /0- 2 awg 1 /0- 1 4 aw g 19 4 4.5 19 2 5.5 MM P TC -1 /0 1 9
2 50k c m il- 1/ 0 a wg 2 50k c m il- 6 awg 27 58 27 3 3.5 MM P TC -2 50 27

52
Split-bolt connector

High strength split-bolt connector made of bronze alloy for use on copper conductors

Conductor Dimension Ordering

Range for equal Min. tap with A B C D referance
main tap one max. Main

1 0 s t r. -1 2 s ol . 1 4 s ol . 9 .5 3 .7 1 2.7 20 MS B C- 10 12
8 s tr .- 10 s ol. 1 4 s ol . 9 .5 3 .7 1 2.7 20 MS B C- 8 10
8 s tr .- 12 s ol. 1 6 s t r. 9 .5 3 .7 1 2.7 23 MS B C- 8 12
6 s ol. - 8 s ol . 1 4 s ol . 1 1.9 4 .3 1 6.7 2 4.6 MS B C- 6 8
6 s ol. - 10 so l. 1 6 s t r. 1 1.9 4 .3 1 6.7 2 8.6 MS B C- 6 10
4 s ol. - 8 s ol . 1 4 s ol . 1 3.5 6 1 8.3 27 MS B C- 4 8A
4 s ol. - 8 s ol . 1 6 s t r. 1 3.5 6 1 8.3 3 2.5 MS B C- 4 8B
3 s ol. - 8 s ol . 1 6 s t r. 1 1.9 4 .3 1 6.7 27 MS B C- 3 8
4 s tr .- 8 so l. 1 6 s t r. 1 1.9 4 .3 1 6.7 3 2.5 MS B C- 4 8C
2 s ol. - 6 s ol . 1 4 s ol . 15 6 .9 1 9.8 3 1.8 MS B C- 2 6A
2 s ol. - 6 s ol . 1 4 s ol . 15 6 .9 1 9.8 3 7.3 MS B C- 2 6B
2 s tr .- 6 so l. 1 4 s ol . 1 7.5 8 .4 2 2.2 3 4.1 MS B C- 2 6C
2 s tr .- 6 so l. 1 4 s ol . 1 7.5 8 .4 2 2.2 4 1.3 MS B C- 2 6D
1 /0 s tr .- 4 s ol . 1 4 s ol . 19 9 .8 2 3.8 4 0.5 MS B C- 1/ 0 4
2 /0 s tr .- 2 s ol . 1 4 s ol . 2 2.2 1 1.3 27 46 MS B C- 2/ 0 2
4 /0 s tr .- 2 s ol . 6 s ol. 2 5.4 1 4.8 3 3.3 5 4.8 MS B C- 4/ 0 2
2 50k c m il. - 1 s tr . 8 s ol. 2 5.4 1 4.8 3 3.3 5 4.8 MS B C- 25 0 1
3 50k c m il - 250k c m il 1 /0 s tr . 3 3.3 1 8.2 4 2.1 6 8.3 MS B C- 35 0 2 50
5 00k c m il - 400k c m il 2 /0 s tr . 3 8.1 2 1.4 4 7.1 77 MS B C- 50 0 4 00
7 50k c m il - 600k c m il 4 /0 s tr . 4 9.2 2 6.1 5 7.2 9 2.9 MS B C- 75 0 6 00
1 000 k cm il - 800 kc m il 4 /0 s tr . 5 7.2 3 0.1 6 4.3 1 02. 4 MS B C- 10 0 8 00

Plated split-bolt connector with spacer made of copper alloy for use on copper, aluminum, ACSR conductors

Conductor range Dimension Ordering

Range for equal Range for Min. tap with A B C D referance
main tap equal main tap one max. main
ACSR Copper or alumininum
- 1 0 s t r. -1 2 s ol . 1 2 s ol . 9 .5 3 .7 1 2.7 23 MS B P C- 10 12
- 8 s tr .- 10 s ol. 1 2 s ol . 9 .5 3 .7 1 2.7 23 MS B P C- 8 1 0
8 6 s ol. - 12 so l. 1 2 s ol . 1 1.9 4 .3 1 6.7 2 8.6 MS B P C- 6 1 2
6-8 4 s ol. - 12 so l. 1 2 s ol . 1 3.5 6 1 8.3 3 2.5 MS B P C- 4 1 2
4-8 2 s ol. - 8 s ol . 8 s ol. 15 6 .9 1 9.8 3 7.3 MS B P C- 2 8
2-8 1 s tr .- 8 so l. 8 s ol. 1 7.5 8 .4 2 2.2 4 1.3 MS B P C- 1 8
1-6 1 /0 s tr .- 4 s ol . 6 s ol. 19 9 .8 2 3.8 46 MS B P C- 1/0 4
1 /0- 6 2 /0 s tr .- 6 s ol . 6 s ol. 2 2.2 1 1.3 27 5 2.4 MS B P C- 2/0 6
4 /0- 4 4 /0 s tr .- 4 s ol . 4 s ol. 2 5.4 1 4.8 3 3.3 6 2.7 MS B P C- 4/0 4
2 66. 8- 1/0 3 50k c m il- 1/ 0 s tr . 2 s ol. 3 3.3 1 8.2 4 2.1 6 8.3 MS B P C- 350 1/ 0
3 97. 5- 1/0 5 00k c m il- 1/ 0 s tr . 1 /0 s tr . 3 8.1 2 1.4 4 7.6 77 MS B P C- 500 1/ 0
6 66. 6- 4/0 7 50k c m il- 4/ 0 s tr . 2 /0 s tr . 4 9.2 2 6.1 5 7.2 9 2.9 MS B P C- 750 4/ 0
9 00- 47 7 1 000 k cm il - 500 kc m il 4 /0 s tr . 5 7.2 3 0.1 6 4.3 1 02. 4 MS B P C- 100 0- 500

53
Aluminium parallel groove connector

Bolt size Main Tap Dimension Ordering

(mm2) (mm2) A B referance

1 × m8 6 - 64 6 - 35 36 45 MAPGC- 6-64- 6-35

2 × m8 6 - 64 6 - 64 36 50 MAPGC- 6-64- 6-64
2 × m8 1 0- 70 1 0- 70 36 50 MAPGC-10-70 -10-70
1 × m8 1 0- 95 6 - 35 40 50 MAPGC-10-95- 6-35
2 × m8 1 0- 95 1 0- 95 40 50 MAPGC-10-95- 10-95
1 × m8 3 5- 120 1 0- 35 45 50 MAPGC-35-120- 10-35
2 × m8 2 5- 120 2 5- 120 45 50 MAPGC-25-120- 25-120
2 × m1 0 2 5- 150 2 5- 150 48 55 MAPGC-25-150- 25-150
1 × m1 0 5 0- 150 6 - 54 40 55 MAPGC-50-150- 6-54
2 × m1 0 5 0- 240 5 0- 240 61 70 MAPGC-50-240- 50-240
3 × m1 0 5 0- 240 5 0- 240 61 70 MAPGC-50-240- 50-240

Conductor Dimension Ordering

L B referance

1 6 - 1 20 45 46 MA P GLC - 16 - 1 20A
1 6 - 1 20 64 46 MA P GLC - 16 - 1 20B
5 0 - 2 40 45 60 MA P GLC - 50 - 2 40A
5 0 - 2 40 70 60 MA P GLC - 50 - 2 40B
1 20 - 240 90 74 MA P GLC - 120 - 240A

Aluminium copper parallel groove connector

Bolt size Aluminum Copper Ordering

area (mm2) (mm2) referance

1 × m8 1 6- 70 1 .5- 1 0 MACPGCS1-16-70- 1.5-10

1 × m8 1 6- 95 1 .5- 3 5 MACPGCS1-16-95- 1.5-35
1 × m8 1 6- 70 6 - 50 MACPGCS1-16-70- 6-50
1 × m8 3 5- 120 1 0- 50 MACPGCS1-35-120- 10-50

Bolt size Aluminum Copper Ordering

area (mm2) (mm2) referance

2 × m8 1 6- 95 1 .5- 1 0 MACPGCD2-16-95- 1.5-10

2 × m8 2 5- 95 1 .5- 3 5 MACPGCD2-25-95- 1.5-35
2 × m8 1 6- 70 6 - 50 MACPGCD2-16-70- 6-50
2 × m8 3 5- 120 1 0- 50 MACPGCD2-35-120- 10-50
2 × m8 2 5- 120 1 0- 95 MACPGCD2-25-120- 10-95
2 × m1 0 9 5- 120 1 0- 50 MACPGCD2-95-120- 10-50
2 × m1 0 3 5- 200 1 6- 185 MACPGCD2-35-200- 16-185
2 × m1 0 5 0- 300 3 5- 240 MACPGCD2-50-300- 35-240
2 × m1 0 5 0- 150 2 5- 70 MACPGCD2-50-150- 25-70
2 × m1 0 7 0 - 1 20 9 5- 120 MACPGCD2-70-120- 95-120

54
 Bolt size Aluminum Copper Ordering
area (mm2) (mm2) referance

3 *m 10 3 5 - 1 85 3 5- 185 MACGCT3-35-185- 35-185

3 *m 10 5 0- 300 3 5 - 2 40 MACGCT3-50-300- 35-240

(C) type comprission connectors

Wire range Dimension Ordering

(mm2) A B L referance

2 5- 25 29 1 8.8 35 MCCC-25-25
3 5- 35 35 21 35 MCCC-35-35
5 0- 50 35 22 35 MCCC-50-50
7 0- 70 40 2 3.5 35 MCCC-70-70
9 5- 95 44 25 35 MCCC-95-95
1 20- 12 0 47 27 35 MCCC-120-120
1 50- 15 0 51 30 35 MCCC-150-150
1 85- 18 5 56 3 1.5 35 MCCC-185-185
2 40- 24 0 6 2.4 3 3.2 35 MCCC-240-240

55
Abdullah ll Bin Alhussain Industrial Estate, Str. J, Sahab Industrial City , P.O.Box110 Amman 11512 Jordan
Tel: +962 6 4020020 - Fax: +962 6 4020023 - Website: www.maseico.com - E-mail: [email protected]