LIFT SELECTION CRITERIA

Interval + average time sec

-interval 30
-average lobby wait time 15

Handling Capacity (HC)

-pax capacity (max) 12-28 12
-normal load/trip (p) 10-22 13 pax

5 min std
handling cap (HC)=300p/I

p=car loading (pax/car)

I =interval (sec) 30

Percentage Handling Capacity (PHC)

-min % buildg popn in 5 mins.(10-15) 14 %

where the population of building is = 3860

Travel time
(lobby wait+travel time to median flr stop)

Calculation no of pax per trip

p=POP x HCP/(300/I) 54.0372 54.0372 pax/trip 540.37 pax/5 min

No of LIFTS 4.2 or > = 4

GENERAL PROVISIONS

Provision for Hotel: area/unit nos Total area car bays

1 lift per 75 rooms 2 66 m2/room 182 rooms 12012 245
1 service lift upto 100 rms + 1 add/200 rms 0
Provision for Hotel: (Suite) area/unit nos Total area car bays
2 lift per 75 rooms 2 139 m2/room 5 rooms 695 14
2 service lift upto 100 rms + 1 add/200 rms 0
Provision for Hotel: (Presidential Suite) area/unit nos Total area car bays
3 lift per 75 rooms 2 295 m2/room 1 rooms 295 6
3 service lift upto 100 rms + 1 add/200 rms 0
TOTAL 500 188 13002 265

Provision for Apartments:

1 Passenger lift/3250m2 net 0 0 m2/unit 0 units 0 0
1 Service lift/24500m2 net 0

Provision for Podium and others:

1 Passenger lift/3250m2 net 2 7102.24 m2/room 7102.24 145
1 Service lift/24500m2 net 0 (min 1 nos)

33106.24 676
SET INTERVAL / AVERAGE LOBBY WAITING TIME

interval lobby waiting time

25-30 15-17
DETERMINE HANDLING CAPACITY

handling capacity (HC)= 300p / I (interval)

Elevator Maximum Normal handling capacity (HC)= 300p / I (interval)

capacity
(lb) passenger passenger
(p)
2000 capacity
12 load
10 per trip* l (interval) = 30
2500 17 13
3000 20 16 HC = 300p/30
3500 (most 23 19 = 10p
freq
4000for off) 28 22

facility HCP
% of
Office population to HCP = 14
buildings
City centre be carried in 5
12.0-14.0
mins
Perimeter 11.5-13
Suburban 14-16

Estimate population for estimating elevator and escalator requirements

Nett Floor Area = 38598 sqm

415468.872 sqft
Estimated population = 1 Person / 10 sqm
= 3859.8
= 3860
calculate p (number of passengers per trip)

p = POP x HCP
---------------
300/I

Where:
p = Number of Passengers (per trip)
POP = The number of persons on floors served
by the elevator system (ground floor
excluded)
HCP = Handling Capacity Percentage (15% = .15)
I = Maximum Acceptable Interval (in seconds)
300 = Seconds available in five-minute peak period (5 x 60)
 LIFT SELECTION CRITERIA SET INTERVAL / AVERAGE LOBBY WAITING TIME

Interval + average time sec interval

-interval 30 25-30
-average lobby wait time 15 DETERMINE HANDLING CAPACITY

Handling Capacity (HC) handling capacity (HC)= 300p / I (interval)

-pax capacity (max) 12-28 12
-normal load/trip (p) 10-22 10 pax Elevator Maximum
capacity
(lb) passenger
5 min std 2000 capacity
12
handling cap (HC)=300p/I 2500 17
3000 20
p=car loading (pax/car) 3500 (most 23
I =interval (sec) 30 freq
4000for off) 28

facility HCP
Percentage Handling Capacity (PHC) % of
-min % buildg popn in 5 mins.(10-15) 14 % Office population to
buildings
City centre be carried in 5
12.0-14.0
mins
where the population of building is = 38 Perimeter 11.5-13
Suburban 14-16
Travel time
(lobby wait+travel time to median flr stop) Estimate population for estimating elevator and escalato
3540
692 Nett Floor Area
33576 Calculation no of pax per trip
376 Estimated population
414 p=POP x HCP/(300/I) 0.532 0.532 pax/trip 5.32 pax/5 min

No of LIFTS 0.1 or > = 0

GENERAL PROVISIONS calculate p (number of passengers per trip)

Provision for Hotel: area/unit nos Total area car bays p = POP x HCP
1 lift per 75 rooms 0 0 m2/room 0 rooms 0 0 ---------------
1 service lift upto 100 rms + 1 add/200 rms 0 300/I

Where:
p = Number of Passengers (per trip)
Provision for Apartments: POP = The number of persons on floors s
1 Passenger lift/3250m2 net 0 0 m2/unit 0 units 0 0 by the elevator system (ground floor
1 Service lift/24500m2 net 0 excluded)
HCP = Handling Capacity Percentage (15%
I = Maximum Acceptable Interval (in seco
Provision for Podium and others: 300 = Seconds available in five-minute pe
1 Passenger lift/3250m2 net 2 7102.24 m2/room 7102.24 145
1 Service lift/24500m2 net 0 (min 1 nos)

7102.24 145
RVAL / AVERAGE LOBBY WAITING TIME

lobby waiting time

15-17
E HANDLING CAPACITY

apacity (HC)= 300p / I (interval)

Normal handling capacity (HC)= 300p / I (interval)

passenger
(p)
load
10 per trip* l (interval) = 30
13
16 HC = 300p/30
19 = 10p
22

HCP = 14

opulation for estimating elevator and escalator requirements

= 380 sqm
4090.32 sqft
= 1 Person / 10 sqm
= 38
= 38
(number of passengers per trip)

p = Number of Passengers (per trip)

POP = The number of persons on floors served
by the elevator system (ground floor

HCP = Handling Capacity Percentage (15% = .15)

I = Maximum Acceptable Interval (in seconds)
300 = Seconds available in five-minute peak period (5 x 60)