Mitigating Risk

Mitigating Risk
Implement containment and immediate correction together

by Greg Wells
Organizations occasionally produce nonconforming parts and must ensure defects are not shipped to customers.
To prevent these defects from reaching customers, you need a foolproof process to manage products that are
potentially nonconforming.
ISO 9001 describes the minimum quality management system requirements for several processes, including
corrective action. Though the standard lists several requirements to effectively implement a corrective action to
resolve a nonconformance, it does not list a requirement to identify and control potentially nonconforming
products related to that nonconformance.
That process is a requirement for several advanced quality management systems—such as AS9100 and the
National Aerospace and Defense Contractors Accreditation Program (NADCAP)—and it is called containment.
While containment is often listed as a single step on a corrective action form, it really should be considered two
distinct activities: containment and immediate correction.
Containment is the comprehensive stock check of completed goods and work in progress that is conducted when
a product-related nonconformance has been identified. You must ensure that all potentially nonconforming parts
are inspected for the defect condition, so 100% of the contained product should be inspected.
Containment is a sorting operation to segregate the nonconforming parts from conforming parts. It is not
necessary to inspect all of a part’s features and characteristics. Only inspect for the characteristic suspected to
be nonconforming. So while the scope of the containment must be comprehensive, the scope of the inspection
can be limited while still providing reasonable confidence that you will prevent the error of shipping defective
products.
After you have contained the suspect parts, you might think that you are ready to investigate the root cause of
the nonconformity, but there is a second phase of the containment task to complete: immediate correction.
You must determine whether any parts will soon run through production and become nonconforming. If so, you
must implement an immediate correction to prevent these parts from becoming defective and potentially reaching
the customer. You may not know what caused the defect to be produced, but you certainly don’t want to allow the
defect to be produced and reach the customer.
So you must implement an immediate correction to bandage the problem until you can properly fix it, thus making
immediate correction the second activity of the two-step containment process. A typical immediate correction
would be to red-line an additional production operation or inspection operation on each applicable work order.
Suppose your car has a flat tire. The problem right now is that you’re stuck on the side of the road. The
immediate correction is to replace the flat tire with the spare tire. It would be a prudent containment action to
inspect the other three tires for nails before driving away from the shop that eventually repairs the flat tire.
It is only after you have implemented these emergency-type responses of containment and immediate correction
that you take the time and energy to determine the root cause of where the nail came from and implement a
corresponding corrective action to prevent future nails in your tires.
Including an effective containment process in the corrective action procedure can provide a reliable means of
ensuring customers do not receive nonconforming products when you encounter a nonconformance. Though
often simply called containment, it is actually two independent tasks that should be implemented in conjunction to
mitigate risk.
Greg Wells is an internal quality auditor at Sikorsky Global Helicopter in Coatesville, PA. He holds a master’s
degree in management science from Troy University in Troy, AL. He is an ASQ senior member and an ASQ-
certified quality systems lead auditor.

Mitigating Risk - Containment and Immediate Correction Published S2-19 Published 1580191605421

Uploaded by

Copyright:

Available Formats

Mitigating Risk - Containment and Immediate Correction Published S2-19 Published 1580191605421

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Mitigating Risk - Containment and Immediate Correction Published S2-19 Published 1580191605421

Uploaded by

Copyright:

Available Formats

Implement containment and immediate correction together

products related to that nonconformance.

distinct activities: containment and immediate correction.

defect to be produced and reach the customer.

corresponding corrective action to prevent future nails in your tires.

certified quality systems lead auditor.

You might also like