Jet Diffuser PDF

JET DIFFUSER
CK Jet Diffuser
ASLI CK Jet Diffusers are made out of a fixed
outer frame and adjustable concentric rings,
which specially designed for high volume and long
throw applications. The concentric rings can be
adjusted 45° upward and downward or leftward
and rightward depending on the installation
position to control the direction of airflow. CK jet
diffusers are suitable to be installed on exposed
ductwork or surface mounted in stadium, factory,
theatre and etc.
Materials Surface Finish Standard Sizes Unit : mm

CK-A Baked white powder ø150 / ø200 / ø250
Outer frame : 1.5mm thickness coated as standard. ø300 / ø350 / ø400
aluminum sheet.
Concentric rings : 1.5mm thickness
aluminum sheet.
Features Accessories
• Economical. C1 Radial fan blade damper
• Long throw capability. HDR-T Round volume control
• High air flow capability. damper
• Suitable for exposed ductwork or surface mounted.
• Suitable for ceiling or wall installation.
• Air flow direction is adjustable up to 45° upward and
downward or leftward and rightward.
CK Construction Illustrations
Top View Section View
CK Physical Dimension Unit : mm

N = Neck Size D = Duct Size W = Wall Size F = Face Size H = Height
150 160 170 214 95
200 210 220 264 115
250 260 265 314 135
300 315 325 371 161
350 365 375 420 200
400 415 450 477 216
All stated specifications are updated at the printing date and

subject to change without notice or obligation. The actual product CK 11
might differ from pictures shown.
JET DIFFUSER
CK Jet Diffuser
CK Order Code
Model Material Accessories Neck Size (mm)
CK A C1 N 150 / 200 / 250 / 300 / 350
Example : CK - A + C1 - N 150
CK Control of Air Flow Direction
Pointing downwards Pointing upwards
Pointing towards left Pointing towards right
The direction of the airflow has to be predetermined before installation. If the airflow direction is upwards or downwards,
the diffuser has to be installed with circular support shaft placing horizontally. If the airflow direction is leftward or
rightward, the diffuser has to be installed with circular support shaft placing vertically.

CK 12 subject to change without notice or obligation. The actual product
JET DIFFUSER
CK Jet Diffuser
CK Installation
Ductwork mounted Wall or ceiling mounted
Radial blade damper (C1) can be installed at the rear of CK to adjust the air flow rate. CK could be connected to a flexible
duct. The opening of the C1 can be adjusted by a screwdriver from the face of the CK.
Flexible Air Duct Screwdriver
C1
CK
CK could be mounted on a panel and supplied as a unit.

The CK panel could be installed on the wall or ceiling.
Two CK panel Three CK panel Four CK panel

subject to change without notice or obligation. The actual product CK 13
JET DIFFUSER
CK Jet Diffuser
CK Suggested Specification
CK-A jet diffuser shall be suitable for throw of 10 meters distance with optimum acoustic properties. The outer frame and
concentric rings shall be made of 1.0mm thickness aluminum sheet roll formed. The concentric rings shall be adjustable
with 45° deflection upward or downward without using any tools. The concentric rings shall be connected to the outer
frame with two circular shafts in one axis. The concentric rings shall be connected to each other with two circular
shafts in an axis, which is perpendicular to the shafts connected to the outer frame. The concentric rings shall have an
aerodynamic profile to diffuse the air. The outer frame shall be detachable from the concentric rings with simple tools. The
diffuser shall be epoxy coated and furnished to architectural requirement.
CK Air Flow Performance Data

Nozzle Vel.
Neck Neck 2.0 3.0 4.0 5.0 6.0 7.0 8.0 10.0
(m/s)
Size Area
(mm) (m²) Tot. Press
0.7 1.5 1.7 2.5 3.1 4.7 6.5 8.4
(mmAq)
CMH 127 191 254 318 382 445 509 636
150 0.0177 Throw (m) 2.6 4 5.5 6.8 8.2 9.6 11 15.2
NC - 120 24 30 37 43 47 50
CMH 226 339 452 565 679 792 905 1131
200 0.0314 Throw (m) 3.8 5.6 7.4 9.2 11 13 14.7 20.5
NC - 20 24 30 37 43 47 50
CMH 353 530 707 884 1060 1237 1414 1767
250 0.0491 Throw (m) 4.6 7 9.5 11.6 13.8 16.2 18.5 25.4
NC - - 22 27 32 36 40 44
CMH 509 763 1018 1272 1527 1781 2036 2545
300 0.0707 Throw (m) 5.6 8.4 11.2 14 16.8 19.5 22.2 31
NC - - 23 27 32 36 40 44
CMH 693 1039 1385 1732 2078 2425 2771 3464
350 0.0962 Throw (m) 6.5 9.6 13 16.3 19.5 22.6 25.6 35.5
NC - - 24 28 34 37 41 45
CMH 905 1357 1810 2262 2714 3167 3619 4524
400 0.1257 Throw (m) 7.4 10.8 15.2 18.8 22.4 26.4 29.4 33.1
NC - - 25 28 35 37 42 46
• Throw is based on terminal velocity of 0.25m/s
• Throw is based on isothermal condition
• NC value is based on room absorption of 10dB, re 10-12 watts
• Dash (-) in space indicates NC value less than 20
• The performance data is tested in zero degree deflection in axial installation (wall installation)

CK 14 subject to change without notice or obligation. The actual product

Jet Diffuser PDF

Uploaded by

Copyright:

Available Formats

Jet Diffuser PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Jet Diffuser PDF

Uploaded by

Copyright:

Available Formats

JET DIFFUSER

Materials Surface Finish Standard Sizes Unit : mm

Top View Section View

CK Physical Dimension Unit : mm

All stated specifications are updated at the printing date and

CK Control of Air Flow Direction

Pointing downwards Pointing upwards

Pointing towards left Pointing towards right

All stated specifications are updated at the printing date and

Ductwork mounted Wall or ceiling mounted

Flexible Air Duct Screwdriver

CK could be mounted on a panel and supplied as a unit.

Two CK panel Three CK panel Four CK panel

All stated specifications are updated at the printing date and

CK Air Flow Performance Data

All stated specifications are updated at the printing date and

You might also like