Eee. 14 15 PDF

Study & Evaluation Scheme
of
Bachelor of Technology
(Electrical & Electronics Engineering)
[Applicable for Academic Session 2014-15]
[With revision approved by VC date January 11, 2017, August 08, 2017 & January 16, 2018]
TEERTHANKER MAHAVEER UNIVERSITY

N.H.-24, Delhi Road, Moradabad, Uttar Pradesh-244001
Website: www.tmu.ac.in
B.Tech (EEE) Syllabus Applicable w.e.f. Academic Session 2014-15 Page 1

TEERTHANKER MAHAVEER UNIVERSITY
(Established under Govt. of U. P. Act No. 30, 2008)
Delhi Road, Bagarpur, Moradabad (U.P)

Bachelor of Technology
SUMMARY
Programme : B.Tech. (Electrical & Electronics Engineering)
Duration : Four year full time (Eight Semesters)
Medium : English
Minimum Required Attendance : 75 %
Credit :
Maximum Credit :
: 194
Minimum credit required for :
the degree 190
Assessment Internal External Total
:
30*/40** 70*/60** 100
Class Class Class Assignment(s) Other Total
Test Test Test Activity
Internal Evaluation (Theory I II III (including
Papers) Best two out of three attendance)
10 10 10 5*/10** 5*/10** 30*/40**
Marks Marks Marks Marks Marks Marks
Internal External Total
Project Phase-I :
100 - 100
Evaluation of Practical/Industrial
Internal External Total
Training/ Project Phase-II :
50 50 100
External Internal
Duration of Examination : 3 hrs. hrs
To qualify the course a student is required to secure a minimum of 40*/45**% marks in aggregate
including the semester end examination and teacher’s continuous evaluation (i.e. both internal and
external).
A candidate who secures less than 40*/45**% of marks in a course shall be deemed to have failed
in that course. The student should have at least 50*/45**% marks in aggregate to clear the semester. In
case a student has secured more than 40*/45**% in each course, but less than 50*/45**% overall in a
semester, he/she shall re-appear in courses where the marks are less than 40*/45**% to achieve the
required aggregate percentage in the semester.
Question Paper Structure
1. The question paper shall consist of eight questions. Out of which first question shall be of short
answer type (not exceeding 50 words) and will be compulsory. Question No. 1 shall contain 8 parts
representing all units of the syllabus and students shall have to answer any five (weightage 4 marks
each).
2. Out of the remaining seven questions, student shall be required to attempt any five questions. There
will be minimum one and maximum two questions from each unit of the syllabus. The weightage of
Question No. 2 to 8 shall be 10 marks each.
3. Usually each question in the examination should be designed to have a numerical component.
*upto academic session 2015-16 and **from academic session 2016-17 onwards
Programme: B. Tech. (Electrical & Electronics Engineering)
Semester I
S. Course Periods Evaluation Scheme

Subject Credit
No Code L T P Internal External Total
1 EAS101 Engineering Mathematics-I 3 1 - 4 30 70 100
EAS102/202 Physics – I 30 70
2 3 - - 3 100
EAS103/203 Chemistry
EME101/201 Engineering Mechanics 30 70
3 3 - - 3 100
EME102/202 Manufacturing Science
ECS101/201 Computer Basics & C Programming 3 30 70
4 - - 3 100
EAS 104/204 Environmental Science
EEE101/201 Basic Electrical Engineering 30 70
5 3 - - 3 100
EEC101/201 Basic Electronics Engineering
6 EHM101 Foundation English-I 2 - 2 3 30 70 100
EAS151/251 Physics (Lab)
7 - - 3 1.5 50 50 100
EAS152/252 Chemistry (Lab)
EME151/251 Engineering Mechanics (Lab)
8 Computer Basics & C Programming - - 3 1.5 50 50 100
ECS151/251
(Lab)
EME152/252 Engineering Drawing (Lab)
9 - - 4 2 50 50 100
EME153/253 Workshop Practice (Lab)
EEE151/251 Basic Electrical Engineering (Lab)
10 - - 3 1.5 50 50 100
EEC151/251 Basic Electronics Engineering (Lab)
Total 17 1 15 25.5 380 620 1000
Semester II
S. Course Periods Evaluation Scheme

Subject Credit
1 EAS201 Engineering Mathematics-II 3 1 - 4 30 70 100
EAS102/202 Physics – I 30 70
2 3 - - 3 100
EAS103/203 Chemistry
EME101/201 Engineering Mechanics 30 70
3 3 - - 3 100
ECS101/201 Computer Basics & C Programming 3 30 70
4 - - 3 100
EAS 104/204 Environmental Science
EEE101/201 Basic Electrical Engineering 30 70
5 3 - - 3 100
EEC101/201 Basic Electronics Engineering
6 EHM201 Foundation English-II 2 - 2 3 30 70 100
EAS151/251 Physics (Lab)
7 - - 3 1.5 50 50 100
EAS152/252 Chemistry (Lab)
8 Computer Basics & C Programming - - 3 1.5 50 50 100
ECS151/251
(Lab)
EME152/252 Engineering Drawing (Lab)
9 - - 4 2 50 50 100
EME153/253 Workshop Practice (Lab)
EEE151/251 Basic Electrical Engineering (Lab)
10 - - 3 1.5 50 50 100
EEC151/251 Basic Electronics Engineering (Lab)
Total 17 1 15 25.5 380 620 1000

Semester III
Sr. Course Periods Evaluation Scheme

Subject
No Code L T P Credit Internal External Total
EAS301/
1 EAS302
Mathematics-III/ Physics- II 3 1 - 4 30 70 100
2 EEE301 Circuit Theory 3 0 - 3 30 70 100

Electrical Measurements And
3 EEE305
Measuring Instruments- I
3 - - 3 30 70 100
4 EEE303 Electrical Machines – I 3 - - 3 30 70 100

5 EEC301 Digital Logic & Circuit 3 - - 3 30 70 100
6 EEC303 Engineering Electromagnetics 3 1 - 4 30 70 100
Electrical Measurements and
8 EEE351
Measuring Instruments -I (Lab)
- - 3 1.5 50 50 100
9 EEE355 Electrical Machines - I (Lab) - - 3 1.5 50 50 100

10 EEC351 Digital Logic & Circuit (Lab) - - 3 1.5 50 50 100
Total 18 2 9 24.5 330 570 900
Additional Courses for Lateral Entry Students with B.Sc background, to be taken in III and
IV semester and all should pass with minimum of 40% marks: credits will not be added)
1 EME152/252 Engineering Drawing Lab - - 3 0 50 50 100

2 EME101/201 Engineering Mechanics 3 - - 0 30 70 100
3 EME153/253 Workshop Practice (Lab) - - 3 0 50 50 100
Semester IV
Sr. Course Periods Evaluation Scheme

Subject
No Code L T P Credit Internal External Total
EAS401/
1 Mathematics –III/ Physics – II 3 1 - 4 30 70 100
EAS402
2 EEE401 Electrical Machines – II 3 - - 3 30 70 100
Electrical Measurements and
3 EEE402 3 - - 3 30 70 100
Measuring Instruments – II
4 EEE403 Network Analysis & Synthesis 3 1 - 4 30 70 100
5 EEC401 Signal & Systems 3 0 - 3 30 70 100
6 EEC403 Electronic Devices & Circuits 3 - - 3 30 70 100
8 EEE451 Electrical Machines – II (Lab) - - 3 1.5 50 50 100
9 EEE452 Network Analysis & Synthesis (Lab) - - 3 1.5 50 50 100
10 EEC452 Electronic Devices & Circuits (Lab) - - 3 1.5 50 50 100
Total 18 2 9 24.5 330 570 900

Semester V
Sr. Periods Evaluation Scheme

Course
No Subject
Code L T P Credit Internal External Total
.
1 EEE501 Control Systems 3 1 - 4 40 60 100
2 EEE502 Power System Analysis-I 3 1 - 4 40 60 100
3 EEE503 Power Electronics 3 - - 3 40 60 100
4 EEC501 Microprocessor & Applications 3 - - 3 40 60 100
Engineering and Managerial
5 EHM503
Economics
3 - - 3 40 60 100
6 EEE551 Control Systems (Lab) - - 3 1.5 50 50 100
7 EEE552 Power Electronics (Lab) - - 3 1.5 50 50 100
8 EEC553 Microprocessor & Applications (Lab) - - 3 1.5 50 50 100
Industrial Training & Presentation
9 EEE591
(4 weeks)
- - - 2 50 50 100
Total 15 2 9 23.5 400 500 900
Semester VI
Periods Evaluation Scheme

Sr. Course
Subject Credi
t
1 EEE601 Electrical Drives & Controls 3 - - 3 40 60 100
2 EEE602 Power System Analysis-II 3 1 - 4 40 60 100
3 EEE603 Power Generation Systems 3 - - 3 40 60 100
Analog and Digital
4 EEC605 3 - - 3 40 60 100
Communication
Object Oriented Programming
5 ECS610 3 - - 3 40 60 100
System
EHM601 Technical Writing 2 - 2 3 40 60 100
6 100
EHM661 Language Lab III - - 5 3 50 50
7 EEE651 Electrical Drives & Controls (Lab) - - 3 1.5 50 50 100
Analog and Digital
8 EEC654 - - 3 1.5 50 50 100
Communication (Lab)
Object Oriented Programming
9 ECS654 - - 3 1.5 50 50 100
System (Lab)
Total 17/15 1 11/14 23.5 330/340 570/560 900

Semester VII
Sr. Course Periods Credit Evaluation Scheme

Subject
1 EEE701 Switchgear & Protection 3 - - 3 40 60 100
2 EEE702 High Voltage Engineering 3 1 - 4 40 60 100
3 EEE703 FACTS Technology 3 - - 3 40 60 100
EEC707 Biomedical Instrumentation 2 - - 40 60 100
4 EEC762/ Design and Installation of Solar 2
- 2 2 50 50 100
BAS464 Photovoltaic System
5 EEE751 Switchgear & Protection (Lab) - - 3 1.5 50 50 100
Industrial Training & Presentation (6
6 EEE791 - - - 2.5 50 50 100
weeks)
Project Work Phase-1 (Synopsis,
7 EEE799 - - 6 3 100 - 100
Literature Survey, and Presentation)
Elective I– Choose any one course along with its lab
EEE704 Telemetry & Data Transmission
8 3 1 - 4 40 60 100
EEC702 Digital Signal Processing
EEE752 Telemetry & Data Transmission (Lab)
9 - - 3 1.5 50 50 100
EEC752 Digital Signal Processing (Lab)
Total 15 1 12 24.5 450 450 900
Semester VIII
S. Periods Credit Evaluation Scheme

Course
Subject
Code L T P Internal External Total
No.
Linear Integrated Circuits &
1 EEE801 Applications
3 - - 3 40 60 100
Antenna & Microwave 40 60
2 EEC805 Engineering
3 - - 3 100
Linear Integrated Circuits &
3 EEE851 - - 3 1.5 50 50 100
Applications (Lab)
Antenna & Microwave
4 EEC854 - - 3 1.5 50 50 100
Engineering (Lab)
Project Work Phase -II
(Report, Analysis, 50 50
5 EEE899 Implementation/Simulation,
- - 18 9 100
and Presentation)
Electric Power System
EEE802 Operation 3 - - 3 40 60
6 ECS807 Artificial Intelligence 100
EEC857 PLC Programming Lab - - 5 3 50 50
Power System Simulation
EEE852 (Lab)
7 - - 3 1.5 50 50 100
ECS853 Artificial Intelligence (Lab)
Total 9/6 - 27/32 22.5 320/330 380/370 700

Semester I
ENGINEERING MATHEMATICS-I
Course Code: EAS101 L T P C
3 1 0 4
Objective:
 To familiarize the basics of matrices, differential calculus, multiple integrals and vector calculus.
 To solve all problems related to matrices, calculus and vectors.
Course Contents
Unit I (Lectures 08)
Matrices: Elementary row and column transformation; Rank of matrix; Linear dependence;
Consistency of linear system of equations; Characteristic equation; Cayley-Hamilton Theorem;
Eigen values and Eigen vectors; Diagonalization; Complex and unitary matrices.
Unit II (Lectures 08)

Differential Calculus-I: Successive differentiation; Leibnitz theorem; Partial differentiation; Euler’s
theorem; Curve tracing; Change of variables; Expansion of function of several variables
Unit III (Lectures 08)

Differential Calculus–II: Jacobian; Approximation of errors; Extrema of functions of several
variables; Lagrange’s method of multipliers (Simple applications).
Unit IV (Lectures 08)

Multiple Integrals: Double and triple integral; Change of order & Change of variables; Beta and
Gamma functions; Applications to area, volume; Dirichlet integral and applications.
Unit V (Lectures 08)

Vector Calculus: Point functions; Gradient, Divergence and Curl of a vector and their physical
interpretations; Line, Surface and Volume integrals; Green’s & Stokes’ theorem; Gauss’ divergence
theorem.
Text Books
1. Grewal B.S., Higher Engineering Mathematics, Khanna Publishers.
2. Prasad C., Engineering Mathematics for Engineers, Prasad Mudralaya.
3. Dass H.K., Engineering Mathematics Vol-I, S. Chand.
Reference Books
1. Kreyszig E., Advanced Engineering Mathematics, Wiley Eastern.
2. Piskunov N, Differential & Integral Calculus, Moscow Peace Publishers.
3. Narayan Shanti, A Text book of Matrices, S. Chand.

Semester I/II
PHYSICS-I
Course Code: EAS102/EAS 202 L T P C

3 0 0 3
Objective:
 To understand the fundamentals of physics like interference, diffraction, lasers etc.
Course Contents
Semiconductor Physics: Distinction among metal, insulator & semiconductor on the basis of band
theory; Intrinsic and Extrinsic semiconductors; Basic concepts of Fermi level; Electron and hole
mobilities; Electrical conductivity and Hall effect; Basics of p-n Junction.

Interference: Basics of interference of light; coherent Sources, Conditions of Interference;
Interference by division of wave front and amplitude (Fresnel’s bi-prism, Newton’s Rings).
Diffraction: Single and multiple slit Diffraction; Diffraction Grating; Rayleigh’s criterion of
resolution; Resolving Power of Telescope, Microscope and Grating.

Polarization: Phenomenon of double refraction; Ordinary and extra-ordinary rays; Nicol Prism;
Production and analysis of Plane, Circularly and Elliptically Polarized Light; Optical Activity;
Specific Rotation, Polarimeter.
Laser: Principle of Laser action; Einstein’s Coefficients; Construction and working of He-Ne and
Ruby Laser.

Fiber Optics and Holography: Fundamentals of fiber optics; Types of fibers; Acceptance angle ;
Numerical aperture; Attenuation, signal loss in optical fiber and dispersion; Propagation mechanism
and communication in optical fiber.
Basic principle of holography; Construction of a hologram and wave reconstruction; Applications of
holography.

Electromagnetics: Ampėre’s law and displacement current; Maxwell’s equations in Integral and
Differential Forms; Equation of continuity; Electromagnetic Wave Propagation in Free Space and
Conducting Media; Poynting Theorem.
Text Books
1. Malik K. H., Engineering Physics, Tata McGraw Hill.
2. Subramanyam N, Optics, Tata McGraw Hill.
Reference Book
1. Yadav V. S., Engineering Physics, Tata McGraw Hill.
2. Mehta Neeraj, Engineering Physics Vol. I & II, Prentice Hall of India Pvt. Ltd.

Semester I/II
CHEMISTRY
Course Code: EAS103/EAS203 L T P C
3 0 0 3
Objective:
 To understand the fundamentals of chemistry like Bonding, Pollution, Polymers, Water Chemistry,
etc.
Course Contents
Chemical bonding & Solid State Chemistry:
Molecular theory of diatomic hetero-molecules; Band theory of bonding in metals; Hydrogen
bonding; Radius Ratio Rule; Space lattice (only cubes); Type of unit cell, Bragg’s Law, Calculation
of Density of unit cell; One & Two Dimensional solids; graphite as two dimensional solid and its
conducting properties; Fullerene & its applications.

Polymers , Reaction Kinetics, Phase rule & Electrochemistry:
Structures of the following polymers, viz, Natural and synthetic rubbers, Polyamide and Polyester
fibres, polymethylmethacrylate, poly acrylonitrile and polystyrene; A brief account of conducting
polymers (polypyrrole & polytriphene) & their applications.
Order & Molecularity of reactions; First & Second order reactions; Energy of activation.
Phase Rule: Its application to one component system (Water). Equilibrium Potential, Introduction of
electrochemical cells & Types: Galvanic & Concentration cells, Electrochemical theory of corrosion
& protection of corrosion.

Water Chemistry & Fuels:
Hardness of water; water softening by Lime Soda Process, Calgon process, Zeolites and ion-
exchange resins; Reverse osmosis;
Classification of fuels, Coal, Biomass & Biogas; Determination of gross and net calorific values
using Bomb Calorimeter.

Glass & Ceramics:
Concept of glass & its constituents; Classification & uses of different glasses; Elementary idea of
manufacturing process of glass; Introduction to Ceramics materials & its constituents, Industrial
application of glass & ceramics.

Lubricants:
Introduction to lubricants; Mechanism of lubrication; Classification of lubricants; Flash and fire
points, Selection of lubricants.
Text Books
1. Agarwal R. K., Engineering Chemistry, Krishna Prakashan.
2. Morrison & Boyd, Organic Chemistry, Prentice Hall
3. Chawla Shashi, Engineering Chemistry, Dhanpat Rai Publication.
Reference Books
1. Barrow Gordon M., Physical Chemistry, McGraw-Hill.
2. Manahan Stanley E., Environmental Chemistry, CRC Press.

Semester I/II
ENGINEERING MECHANICS
Course Code: EME101/EME201 L T P C

3 0 0 3
Objective:
To study about mechanics, force system, torsion, beams, trusses, frames etc.
Course Contents
Force systems and analysis: Basic concept; Newton’s laws of motion; Transfer of force to a parallel
position; Determination of resultant of planer force system; Free body diagrams; Equilibrium of
forces and its equations.
Friction: Introduction; Coulomb’s law of friction; Equilibrium of bodies involving dry fiction; Belt
Friction.

Structural Analysis: Beams; Introduction; Shear force and Bending Moment; shear force and
Bending Moment Diagram for statically determinate beams.
Trusses: Introduction; Simple Trusses; Determination of Forces in simple trusses members; methods
of joints and method of section.

Centroid and Moment of Inertia: Centroid of plane; curve, area, volume and composite bodies;
Moment of inertia of plane area; Parallel Axes Theorem; Perpendicular axes theorems; Principal
Moment Inertia; Mass Moment of Inertia of Circular Ring, Disc, Cylinder, Sphere and Cone about
their axis of symmetry

Simple stress and strain: Introduction; Normal shear stresses; stress-strain diagrams for ductile and
brittle materials; Elastic constants; one dimensional loading of members of varying cross sections.

Pure Bending of Beams: Introduction; Simple bending theory; Stress in Beams of different cross
sections.
Torsion: Introduction; Torsion of shafts of circular section; Torque and Twist; Shear stress due to
Torque.
Text Books
1. Bansal R. K., Engineering Mechanics, Laxmi Publications.
2. Kumar D. S., Engineering Mechanic, S. K. Kataria & Sons.
3. Kumar K. L., Kumar V., Engineering Mechanics, Tata McGraw Hill Publication.
4. Khurmi R. S., Engineering Mechanics, S. Chand Publications.
Reference Books
1. Shames, Engineering Mechanics, Prentice Hall of India Pvt. Ltd.
2. Ryder G. H., Strength of Materials, Macmillan Publishers India Ltd.
3. Ramamruthams, Strength of materials, Dhanpat Rai Publications.

Semester I/II
MANUFACTURING SCIENCE

3 0 0 3
Objective: To expose the students about basics of manufacturing processes as applicable in
Mechanical Engineering.
Course Contents

Basic Metals & Alloys: Properties and Applications; Properties of Materials: Strength, elasticity,
stiffness, malleability, ductility, brittleness, toughness, and hardness; Elementary ideas of fracture
fatigue & creep.

Metal Forming: Basic metal forming operations & uses of such as: Forgoing, Rolling, Wire
drawing/making and Extrusion, and its products/application; Press-work; die & punch assembly,
cutting and forming, its application; Hot-working versus cold-working; Introduction to Plastics:
Types, Machines: Injection Moulding.
Casting: Pattern & allowance; Molding sands its desirable properties; Mould making with the use of
core; Gating system, Casting defects & remedies; Cupola Furnace, Die-casting and its uses.

Machining: Basic principles of Lathe-machine and operations performed on it; basic description of
machines and operations of Shaper-Planner, Drilling, Milling & Grinding.
Welding: Importance & basic concepts of welding; Classification of welding processes: Gas-
welding, types of flames and principle; Electric-Arc welding; Resistance welding; Soldering, &
Brazing and its uses.
Unconventional Manufacturing Process: Limitations of conventional manufacturing process; need
of unconventional manufacturing processes; Basic Principles and working of unconventional
manufacturing process and their applications; Electro-Discharge machining; Electro-chemical
machining; Ultrasonic machining; Abrasive jet machining; Water jet machining;, Laser cutting and
Laser beam welding.
Super Finishing Processes: Introduction; Lapping; Honing; Buffing; Burnishing; Powder coating;
Polishing
Text Books
1. Hajra & Bose, Workshop Technology, Vol 1 & 2, Roy Media Promoters.
2. Pandey & Singh, Production Engineering Science, Standard Publishers.
3. R.K. Jain, Production technology, Khanna publishers.
Reference Books
1. Raghuvanshi, B.S., Workshop Technology, Vol 1 & 2, Dhanpat Rai & Sons.
2. Laxmi Narayan & Vaish W, A Text Book of Practical Geometrical Drawing, Pearson Education.

Semester I/II
COMPUTER BASICS & C PROGRAMMING
Course Code: ECS101/ECS201 L T P C

3 0 0 3
Objective:
 To learn the basics of computers & C programming language.
Course Contents:
Concepts in Computer Application: Definition of Electronic Computer; History; Generations;
Characteristics and Application of Computers; Classification of Computers; Functional
Component of Computer: CPU, I/O devices, Type of Memory & Memory Hierarchy, Firmware
and Human ware.
Data and data types: Definitions, data, data types: Integer, Character, Float, String, etc.;
Constants and Variable Declaration; Token; Keyboard; Identifier.

Programming Language Classification & Computer Languages: Generation of Languages;
Introduction to 4GLs; Translators; Assemblers; Compilers; Interpreters.
Number System: Decimal, Octal, Binary and Hexadecimal & their Conversions; Various Code:
BCD, ASCII and EBCDIC and Gray Code.
Operators and Expressions: Numeric and relation operators; logical operator; bit operator;
operator precedence and associatively.

Internet and Web Technologies: Hypertext Markup Language; WWW; Gopher; FTP; Telnet; Web
Browsers; Search Engines; Email.
Control Structure: while statement, if, else, Nested if else statement. Nested logic: for loop, do-
while loop, loop inside a loop structure, Switch Statement. Break and default with switch.

Concepts in Operating Systems: Elementary Concepts in Operating Systems; Textual Vs GUI
Interface.
Arrays: Notation and representation; Manipulation of array elements; Multidimensional arrays.

Functions & Strings: Definition; Declaration; Call by Value; Call by Reference; Returns values
and their types; Function calls
Text Books
1. Sinha P. K., Computer Fundamentals, BPB Publications.
2. Yadav, DS, Foundations of IT, New Age.
3. Curtin, Information Technology: Breaking News, Tata McGraw Hill.
4. Rajaraman,R, Introduction to Computers, Prentice Hall of India.
Reference Books
1. Peter Nortans, Introduction to Computers, Tata McGraw Hill.
2. Leon & Leon, Fundamental of Information Technology, Vikas Publishing.
3. Kanter, Managing Information System, Prentice-Hall.
4. CISTems, Internet: An Introduction, Tata McGraw Hill.

Semester I/II
ENVIRONMENTAL SCIENCE

3 0 0 3
Objective: To create awareness among students about environment protection.

Introduction: Definition, Scope, Segments of Environment and its Multidisciplinary Nature; Some
Major Environmental Problems; Definition and Scope of Ecology.

Ecology And Environment: Concept of an Ecosystem- its components and functions; Trophic Levels-
Producer; Consumer and Decomposer; Energy Flow in an Ecosystem; Biogeochemical Cycles; Food
Chain; Food Web and Ecological Pyramid.

Air & water pollution: Various segments of Atmosphere and their Significance; Sources and Effects
of Air Pollution; Sources of Air Pollution: Photochemical Smog, Acid Rain, Global Warming, Ozone
Layer - Its Depletion and Control Measures; Sources of Water Pollution; Treatment of Water
Pollution; Eutrophication.

Soil & Thermal pollution: Soil pollution: Sources and Consequences; Solid Wastes – Pollution;
Treatment & Disposal.
Thermal - sources and consequences; Sustainable Development; Dams and Reservoirs- Their Benefits
and Problems.

Biodiversity & its conservation
Bio-Diversity Hot-spots of Biodiversity in India and World; Conservation; Importance and Factors
Responsible for Loss of Biodiversity; Deforestation- causes and effects; Biogeographical
Classification of India; Environment Conservation Movement in India (Chipko Movement, Appiko
Movement), Bioremediation; Biological Magnification.
Text Books
1. De A.K., Environmental Chemistry, New Age Publishers Pvt. Ltd.
2. Masters, G.M., Introduction to Environmental Engineering and Science, Prentice Hall India Pvt.
Ltd.
3. Odum, E.P., Fundamentals of Ecology, W. B. Sannders Co.
Reference Books
1. Bryant,P.J., Biodiversity and Conservation, Hypertext Book.
2. Tewari, Khulbe & Tewari, Textbook of Environment Studies, I.K. Publication.
3. Trivedi, R.K., Handbook of Environmental Laws, Rules, Guidelines, Compliances and
Standards, Vol I and II, Environment Media.

Semester I/II
BASIC ELECTRICAL ENGINEERING
Course Code: EEE101/EEE201 L T P C

3 0 0 3
Objective
 To understand the fundamental concept of Electrical Engineering like DC Network, AC
Network, Measuring Instruments, Energy Conversion Devices etc.
Course Contents

D.C. Network Theory: Circuit theory concepts-Mesh and node analysis; Network Theorems-
Superposition theorem, Thevenin’s theorem, Norton’s theorem and Maximum Power Transfer
theorem; Star Delta transformation.

Steady State Analysis of A.C. Circuits: Sinusoidal and phasor representation of voltage and
current; Single phase A.C. circuit behaviour of resistance, inductance and capacitance and their
combination in series & parallel; Power factor; Series and parallel resonance; Band width and
quality factor; magnetic circuit.

Measuring Instruments: Construction and principles of operation of voltage and current measuring
instruments; introduction to power and energy meters.
Three Phase A.C. Circuits: Star-Delta connections; Line and phase voltage/current relations; Three
phase power and its measurement.

Transformer: Principle of operation; Types of construction; Phasor diagram; Equivalent circuit;
Efficiency and voltage regulation of single phase transformer; Open and short circuit tests.
D.C. Machines: Principles of electromechanical energy conversion; Types of D.C. machines;
E.M.F. equation; Magnetization and load characteristics; Losses and efficiency; Starter and speed
control of D.C. Motors; Motor applications.

Three phase induction Motor: Principle of operation; Types and methods of starting; slip-torque
characteristics; Applications.
Synchronous Machines: Principle of Operation of Alternator and synchronous motor
Single phase Motors: Principle of operation and methods of starting of induction motor,
Text Books
1. V. Del Toro, Principles of Electrical Engineering, Prentice-Hall International.
2. W.H. Hayt & J.E. Kemmerly, Engineering Circuit Analysis, McGraw Hill.
Reference Books
1. Nagrath I.J., Basic Electrical Engineering, Tata McGraw Hill.
2. Fitzgerald A.E & Higginbotham ., D.E., Basic Electrical Engineering, McGraw Hill.
3. A Grabel, Basic Electrical Engineering, McGraw Hill.
4. Cotton H., Advanced Electrical Technology, Wheeler Publishing.

Semester I/II
BASIC ELECTRONICS ENGINEERING
Course Code: EEC101/EEC201 L T P C

3 0 0 3
Objective
 To understand the basic concept of Electronics Engineering like p-n Junction, Bipolar
Junction Transistor, Field Effect Transistor, Operational Amplifier etc.
Course Contents

p-n Junction: Properties of Elements; Crystal Structure; Energy band diagram; Introduction to PN-
Junction; Depletion layer; V-I characteristics Diode Ratings (average current, peak-inverse voltage);
p-n junction as rectifiers (half wave and full wave) & filter; calculation of ripple factor and load
regulation; clipping and clamping circuits; Zener diode and its application as shunt regulator.

Bipolar Junction Transistor (BJT): Basic construction; transistor action; CB, CE and CC
configurations; input/output characteristics; Biasing of transistors: Fixed bias, emitter bias, potential
divider bias; Graphical analysis of CE amplifier; concept of Voltage gain current gain; λ-parameter
model (low frequency); Computation of Ai, Av, Ri & Ro of single transistor CE amplifier
configuration.

Field Effect Transistor (FET): Basic construction of JFET; Principle of working; concept of pinch-
off maximum drain saturation current; input and transfer characteristics; Characteristics equation;
CG, CS and CD Configuration; fixed and self biasing of JFET amplifier Introduction of MOSFET;
Depletion and Enhancement type MOSFET- Construction; Operation and Characteristics.

Operational Amplifier (Op-Amp): Concept of ideal operational amplifier; ideal and practical Op-
Amp parameters; inverting, non-inverting and unity gain configurations; Applications of Op-Amp as
adders, difference amplifiers, integrators and differentiator.

Switching Theory: Number system; conversion of bases (decimal, binary, octal and hexadecimal
numbers); Adder & Subtraction; BCD numbers; Seven Segment Display; Boolean Algebra; Logic
gates; Concept of universal gates; Canonical forms; minimization using K-Map
Text Books
1. Robert Boylestad & Louis Nashelsky, Electronic Circuit and Devices, Pearson India.
2. Millman & Halkias, Integrated Electronics, McGraw Hill.
3. Millman & Halkias, Electronics Devices and Circuits, McGraw Hill.
4. Morris Mano M., Digital Design, Prentice Hall.
Reference Books
1. Sedra and Smith, Microelectronic Circuits, Oxford University Press .
2. Gayakwad, R A, Operational Amplifiers and Linear Integrated circuits, Prentice Hall of India
Pvt. Ltd.
3. Chattopadhyay D and P C Rakshit, Electronics Fundamentals and Applications, New Age
International.

Semester-I
FOUNDATION ENGLISH - I
Course code: EHM101 L T P C

2 0 2 3
(Common with BPH105/BED105/BAL101/AR107/BHM101/BFS106/BCA106/BBA106/ BCH106/
BFA103)
Course Contents:
Functional Grammar: Patterns & Parts of speech Subject, Predicate, Noun, Pronoun, Adjective,
Adverb, Verb, Verb phrases, Conjunction, Interjection.

Vocabulary: Word formation, Prefix, Suffix, Compound words, Conversion, Synonyms, Antonyms,
Homophones and Homonyms, How to look up a dictionary.

Communication: Meaning & importance of communication, Barriers to effective communication,
Channels of communication, Language as a tool of communication

Requisites of Sentence writing: Fragmented sentences, A good sentence, expletives, Garbled
sentences, Rambling sentences, Loaded sentences, Parallel Comparison, Squinting construction,
Loose & periodic sentences.
Text Books:
1. Martin & Wren - High School English Grammar & Composition, S.Chand & Co.
2. Lewis Norman - Word Power made easy, W.R.Goyal Publication & Distributors.
3. Better Your English: A Workbook for 1st year Students, Macmillan India.
Reference Books:
1. Raman Meenakshi & Sharma Sangeeta, Technical Communication: Principles & Practices,
Oxford University Press, New Delhi.
2. Mohan Krishna & Banerji Meera, Developing Communication Skills, Macmillan India Ltd.
3. Rosen Blum M., How to Build Better Vocabulary, Bloomsbury Publication. London.
NOTE:
This syllabus has been designed to improve the oral and written communication skills of
students. The faculty members should put emphasis on practical (oral) activities for generating
students’ interest in language learning.

Semester I/II
PHYSICS (LAB)

0 0 3 1.5
LIST OF EXPERIMENTS
1. To determine the wavelength of Sodium light by Newton’s rings.

2. To determine the wavelength of Sodium light by Fresnel’s Biprism.
3. To determine the Specific Rotation of the Cane sugar solution with the help of Polari meter.
4. To determine the wavelength of the sodium light by Michelson’s interferometer.
5. To study the PN junction characteristics.
6. To determine the high resistance by Leakage method.
7. To study the energy band gap by four probe method.
8. To study the variation of magnetic field using Stewart and Gee’s apparatus.
9. To determine the frequency of A.C. mains by means of a Sonometer.
10. To study the Hall Effect.
Evaluation of Practical Examination:
Internal Evaluation (50 marks)

Each experiment would be evaluated by the faculty concerned on the date of the experiment on a 5
point scale which would include the practical conducted by the students and a Viva taken by the
faculty concerned. The marks shall be entered on the index sheet of the practical file.
Evaluation scheme:
PRACTICAL PERFORMANCE &

VIVA DURING THE SEMESTER (30 ATTENDANCE QUIZ VIVA TOTAL
MARKS) (5 MARKS) (5 (10 INTERNAL
EXPERIMENT FILE VIVA MARKS) MARKS) (50
(10 MARKS) WORK (10 MARKS)
(10 MARKS)
MARKS)
External Evaluation (50 marks)

The external evaluation would also be done by the external Examiner based on the experiment
conducted during the examination.
EXPERIMENT FILE WORK VIVA TOTAL

(20 MARKS) (10 MARKS) (20 MARKS) EXTERNAL
(50 MARKS)

Semester I/II
CHEMISTRY (LAB)

0 0 3 1.5
LIST OF EXPERIMENTS
1. To determine total alkalinity in the given water sample.

2. To determine the temporary and permanent hardness in water sample using EDTA as standard
solution.
3. To determine the available chlorine in bleaching powder solution.
4. To determine the chloride content in the given water sample by Mohr’s method.
5. To determine the pH of the given solution using pH meter and pH-metric titration.
6. To determine the Equivalent weight of Iron by the chemical displacement method.
7. To determine the Viscosity of an addition polymer like polyester by Viscometer.
8. To determine the dissolved oxygen present in a water sample.
9. To prepare the Bakelite resin polymer.
10. To determine the viscosity of a given sample of a lubricating oil using Redwood Viscometer.
11. To determine the carbon dioxide content in polluted water sample.
12. To find chemical oxygen demand of waste water sample by potassium dichromate.
13. To determine the total hardness in water sample using complexometric method.
14. To determine the iron content in the given sample using external indicator.
15. To determine the strength of given HCL solution by titrating against N/10 Standard Sodium
hydroxide solution.
Note: Minimum of 10 experiments has to be completed for completion of curriculum.

Evaluation scheme:
(10 MARKS)
MARKS)


(50 MARKS)

Semester I/II
ENGINEERING MECHANICS (LAB)

0 0 3 1.5
(Any 10 experiments of the following or such experiments suitably designed)
LIST OF EXPERIMENTS
1. To conduct the tensile test and determine the ultimate tensile strength, percentage elongation for a
steel specimen.
2. To conduct the compression test and determine the ultimate compressive strength for a specimen.
3. To conduct the Impact test on Impact-testing machine to find the toughness by Charpy impact test.
4. To conduct the Impact-test on Impact-testing machine to find the toughness by Izod impact Test.
5. To determine the hardness of the given specimen using Rockwell hardness testing machine.
6. To determine the hardness of the given specimen using Brinell hardness testing machine.
7. To determine gear ratio of simple and compound gear train.
8. To determine the mechanical advantage of worm and worm wheel for load lifting.
9. To find the coefficient of friction on inclined plane.
10. To perform torsion test for rod on torsion testing machine.

point scale which would include the practical conducted by the students and a Viva voce taken by the
Evaluation scheme:

(10 MARKS)
MARKS)


(50 MARKS)

Semester I/II
COMPUTER BASICS & C PROGRAMMING (LAB)
Course Code: ECS 151/ 251 L T P C

0 0 3 1.5
Course Contents
1. To write a program to calculate Sum & average of N numbers.
2. To write a program to convert integer arithmetic to a given number of day and month.
3. To write a program to find maximum and minimum out of 3 numbers a, b & c.
4. To write a program to find factorial of positive integer.
5. To write a program to find sum of series up to n number, 2+5+8+…………………+n.
6. To write a program to print all the number between 1 to 100 which are dividing by 7.
7. To write a program to generate Fibonacci series up to n.
8. To write a program to implement a function to calculate area of a circle.
9. To write a program to implement a recursive function to calculate factorial of given number.
10. To write a program to find whether number is prime or not.
11. To write a program to find that the enter character is a letter or digit.
12. To write a program to find addition of two matrix of n*n order.
13. To write a program to find multiplication of two matrix of n*n order.
14. To write a program to add 6 digit numbers in even case & multiple 6 digit number in odd case.
15. To write a program to find even or odd up to a given limit n.
16. To write a program to find whether a given no is palindrome or not.
17. To write a program to joining & Comparing the 2 string.
Evaluation scheme:

(10 MARKS)
MARKS)


(50 MARKS)

Semester I/II
ENGINEERING DRAWING (LAB)

0 0 4 2
1. To write all Numbers (0 to 9) and alphabetical Letters (A to Z) as per the standard dimensions.
2. To draw the types of lines and conventions of different materials.
3. To draw and study dimensioning and Tolerance.
4. To construction geometrical figures of Pentagon and Hexagon
5. To draw the projection of points and lines
6. To draw the Orthographic Projection of given object in First Angle
7. To draw the Orthographic Projection of given object in Third Angle
8. To draw the sectional view of a given object
9. To draw the development of the lateral surface of given object
10. To draw the isometric projection of the given orthographic projection.
Reference Books
1. Bhatt. N.D., Elementary Engineering Drawing, Charothar Publishing.
2. Narayana K.L. & Vaish W., A Text Book of Practical Geometry on Geometrical Drawing, Pearson
Education.

Each sheet prepared would be evaluated by the faculty concerned on the date of preparing the sheet
on a 5 point scale which would include the sheet drawn by the students and a Viva voce taken by the
faculty concerned. The marks shall be entered on the index sheet.
Evaluation scheme:

(10 MARKS)
MARKS)


(50 MARKS)

Semester I/II
WORKSHOP PRACTICE (LAB)
0 0 4 2
List of Experiments
Perform any ten experiments selecting at least one from each shop.
Carpentry Shop:
1. To prepare half-lap corner joint.
2. To prepare mortise & tenon joint.
3. To prepare a cylindrical pattern on woodworking lathe.
Fitting Bench Working Shop:
1. To prepare a V-joint fitting
2. To prepare a U-joint fitting
3. To prepare a internal thread in a plate with the help of tapping process
Black Smithy Shop:
1. To prepare a square rod from given circular rod
2. To prepare a square U- shape from given circular rod
Welding Shop:
1. To prepare a butt and Lap welded joints using arc welding machine.
2. To prepare a Lap welded joint Gas welding equipment.
3. To prepare a Lap welded joint using spot welding machine.
Sheet-metal Shop:
1. To make round duct of GI sheet using ‘soldering’ process.
2. To prepare a tray of GI by fabrication
Machine Shop:
1. To prepare a bolt on the lathe machine as per given. diagram
2. To prepare a job on the lathe machine as per given diagram.
Foundry Shop:
1. To prepare core as per given size.
2. To prepare a mould for given casting.
Evaluation scheme:
(10 MARKS)
MARKS)
EXPERIMENT FILE WORK VIVA TOTAL EXTERNAL
(20 MARKS) (10 MARKS) (20 MARKS) (50 MARKS)

Semester I/II
BASIC ELECTRICAL ENGINEERING (LAB)

0 0 3 1.5
LIST OF EXPERIMENTS
1. To verify the Kirchhoff’s current and voltage laws.

2. To verify the Superposition theorem.
3. To verify the Thevenin’s theorem.
4. To verify the Norton’s theorem.
5. To verify the maximum power transfer theorem.
6. To determine the efficiency of single-phase transformer by load test.
7. To determine the external characteristics of DC Shunt generator.
8. To measure current and speed for speed control of D.C. Shunt Motor.
9. To measure the power in a 3-phase system by two-wattmeter method
10. To measure the power factor in an RLC by varying the capacitance.

Evaluation scheme:

(10 MARKS)
MARKS)


(50 MARKS)

Semester I/II
BASICS ELECTRONICS ENGINEERING (LAB)

0 0 3 1.5
LIST OF EXPERIMENTS
1. To study the V-I characteristics of p-n junction diode.

2. To study the diode as clipper and clamper.
3. To study the half-wave & full-wave rectifier using silicon diode.
4. To study transistor in Common Base configuration & plot its input/output characteristics.
5. To study transistor in Common Emitter configuration & plot its input/output characteristics. .
6. To study the operational amplifier in inverting & non inverting modes using IC 741.
7. To study the operational amplifier as differentiator & integrator.
8. To study the Zener diode as a shunt regulator.
9. To study various logic gates & verify their truth tables.
10. To study half adder/full adder & verify their truth tables.

Evaluation scheme:

(10 MARKS)
MARKS)


(50 MARKS)

Semester II
ENGINEERING MATHEMATICS- II
Course Code: EAS201 L T P C

3 1 0 4
Objective: To familiarize the basic concept of Differential Equations, Laplace Transform, Fourier
series and Partial Differential Equations etc.
Course Contents

Differential Equations: Ordinary differential equations of first order; Exact differential equations;
Linear differential equations of first order, Linear differential equations of nth order with constant
coefficients; Complementary functions and particular integrals; Simultaneous linear differential
equations; Solutions of second order differential equations by changing dependent and independent
variables; Method of variation of parameters; Applications to engineering problems (without
derivation).
Series Solutions and Special Functions: Series solutions of ODE of 2nd order with variable
coefficients with special emphasis to differential equations of Legendre and Bessel; Legendre
polynomials; Bessel’s functions and their properties.

Partial Differential Equations and applications: Introduction of partial differential equations;
Linear partial differential equations with constant coefficients of 2nd order and their classifications –
parabolic; elliptic and hyperbolic with illustrative examples.
Method of separation of variables for solving partial differential equations; Wave equation up to two
dimensions; Laplace equation in two-dimensions; Heat conduction equations up to two-dimensions;
Equations of transmission Lines.

Fourier Series: Periodic functions, Trigonometric series; Fourier series; Euler’s formulae; Even and
odd functions, Half range sine and cosine series.

Laplace Transform: Laplace transform; Existence theorem; Laplace transform of derivatives and
integrals; Inverse Laplace transform; Unit step function; Diracth delta function; Laplace transform of
periodic functions; Convolution theorem; Application to solve simple linear and simultaneous
differential equations.
Text Books
1. Grewal B.S., Higher Engineering Mathematics, Khanna Publishers.
2. Prasad C., Engineering Mathematics for Engineers, Prasad Mudralaya.
3. Das H.K., Engineering Mathematics Vol-II, S. Chand.
Reference Books
1. Kreyszig E., Advanced Engineering Mathematics, Wiley Eastern.
2. Piskunov N, Differential & Integral Calculus, Moscow Peace Publishers.
3. Narayan Shanti, A Text book of Matrices, S. Chand
4. Bali N.P., Engineering Mathematics-II, Laxmi Publications.

Semester II/I
PHYSICS-I

3 0 0 3
Objective:
 To understand the fundamentals of physics like interference, diffraction, lasers etc.
Course Contents

Semiconductor Physics: Distinction among metal, insulator & semiconductor on the basis of band
theory; Intrinsic and Extrinsic semiconductors; Basic concepts of Fermi level; Electron and hole
mobilities; Electrical conductivity and Hall effect; Basics of p-n Junction.

Interference: Basics of interference of light; coherent Sources, Conditions of Interference;
Interference by division of wave front and amplitude (Fresnel’s bi-prism, Newton’s Rings).
Diffraction: Single and multiple slit Diffraction; Diffraction Grating; Rayleigh’s criterion of
resolution; Resolving Power of Telescope, Microscope and Grating.

Polarization: Phenomenon of double refraction; Ordinary and extra-ordinary rays; Nicol Prism;
Production and analysis of Plane, Circularly and Elliptically Polarized Light; Optical Activity;
Specific Rotation, Polarimeter.
Laser: Principle of Laser action; Einstein’s Coefficients; Construction and working of He-Ne and
Ruby Laser.

Fiber Optics and Holography: Fundamentals of fiber optics; Types of fibers; Acceptance angle ;
Numerical aperture; Attenuation, signal loss in optical fiber and dispersion; Propagation mechanism
and communication in optical fiber.
Basic principle of holography; Construction of a hologram and wave reconstruction; Applications of
holography.

Electromagnetics: Ampėre’s law and displacement current; Maxwell’s equations in Integral and
Differential Forms; Equation of continuity; Electromagnetic Wave Propagation in Free Space and
Conducting Media; Poynting Theorem.
Text Books
1. Malik K. H., Engineering Physics, Tata McGraw Hill.
2. Subramanyam N, Optics, Tata McGraw Hill.
Reference Book
1. Yadav V. S., Engineering Physics, Tata McGraw Hill.
2. Mehta Neeraj, Engineering Physics Vol. I & II, Prentice Hall of India Pvt. Ltd.

Semester II/I
CHEMISTRY
3 0 0 3
Objective:
 To understand the fundamentals of chemistry like Bonding, Pollution, Polymers, Water Chemistry,
etc.
Course Contents
Chemical bonding & Solid State Chemistry:
Molecular theory of diatomic hetero-molecules; Band theory of bonding in metals; Hydrogen
bonding; Radius Ratio Rule; Space lattice (only cubes); Type of unit cell, Bragg’s Law, Calculation
of Density of unit cell; One & Two Dimensional solids; graphite as two dimensional solid and its
conducting properties; Fullerene & its applications.

Polymers , Reaction Kinetics, Phase rule & Electrochemistry:
Structures of the following polymers, viz, Natural and synthetic rubbers, Polyamide and Polyester
fibres, polymethylmethacrylate, poly acrylonitrile and polystyrene; A brief account of conducting
polymers (polypyrrole & polytriphene) & their applications.
Order & Molecularity of reactions; First & Second order reactions; Energy of activation.
Phase Rule: Its application to one component system (Water). Equilibrium Potential, Introduction of
electrochemical cells & Types: Galvanic & Concentration cells, Electrochemical theory of corrosion
& protection of corrosion.
Water Chemistry & Fuels:
Hardness of water; water softening by Lime Soda Process, Calgon process, Zeolites and ion-
exchange resins; Reverse osmosis;
Classification of fuels, Coal, Biomass & Biogas; Determination of gross and net calorific values
using Bomb Calorimeter.

Glass & Ceramics:
Concept of glass & its constituents; Classification & uses of different glasses; Elementary idea of
manufacturing process of glass; Introduction to Ceramics materials & its constituents, Industrial
application of glass & ceramics.

Lubricants:
Introduction to lubricants; Mechanism of lubrication; Classification of lubricants; Flash and fire
points, Selection of lubricants.
Text Books
1. Agarwal R. K., Engineering Chemistry, Krishna Prakashan.
2. Morrison & Boyd, Organic Chemistry, Prentice Hall
3. Chawla Shashi, Engineering Chemistry, Dhanpat Rai Publication.
Reference Books
1. Barrow Gordon M., Physical Chemistry, McGraw-Hill.
2. Manahan Stanley E., Environmental Chemistry, CRC Press.

Semester II/I
ENGINEERING MECHANICS

3 0 0 3
Objective:
To study about mechanics, force system, torsion, beams, trusses, frames etc.
Course Contents
Force systems and analysis: Basic concept; Newton’s laws of motion; Transfer of force to a parallel
position; Determination of resultant of planer force system; Free body diagrams; Equilibrium of
forces and its equations.
Friction: Introduction; Coulomb’s law of friction; Equilibrium of bodies involving dry fiction; Belt
Friction.

Structural Analysis: Beams; Introduction; Shear force and Bending Moment; shear force and
Bending Moment Diagram for statically determinate beams.
Trusses: Introduction; Simple Trusses; Determination of Forces in simple trusses members; methods
of joints and method of section.

Centroid and Moment of Inertia: Centroid of plane; curve, area, volume and composite bodies;
Moment of inertia of plane area; Parallel Axes Theorem; Perpendicular axes theorems; Principal
Moment Inertia; Mass Moment of Inertia of Circular Ring, Disc, Cylinder, Sphere and Cone about
their axis of symmetry

Simple stress and strain: Introduction; Normal shear stresses; stress-strain diagrams for ductile and
brittle materials; Elastic constants; one dimensional loading of members of varying cross sections.

Pure Bending of Beams: Introduction; Simple bending theory; Stress in Beams of different cross
sections.
Torsion: Introduction; Torsion of shafts of circular section; Torque and Twist; Shear stress due to
Torque.
Text Books
1. Bansal R. K., Engineering Mechanics, Laxmi Publications.
2. Kumar D. S., Engineering Mechanic, S. K. Kataria & Sons.
3. Kumar K. L., Kumar V., Engineering Mechanics, Tata McGraw Hill Publication.
4. Khurmi R. S., Engineering Mechanics, S. Chand Publications.
Reference Books
1. Shames, Engineering Mechanics, Prentice Hall of India Pvt. Ltd.
2. Ryder G. H., Strength of Materials, Macmillan Publishers India Ltd.
3. Ramamruthams, Strength of materials, Dhanpat Rai Publications.

Semester II/I
MANUFACTURING SCIENCE

3 0 0 3
Objective: To expose the students about basics of manufacturing processes as applicable in
Mechanical Engineering.
Course Contents

Basic Metals & Alloys: Properties and Applications; Properties of Materials: Strength, elasticity,
stiffness, malleability, ductility, brittleness, toughness, and hardness; Elementary ideas of fracture
fatigue & creep.

Metal Forming: Basic metal forming operations & uses of such as: Forgoing, Rolling, Wire
drawing/making and Extrusion, and its products/application; Press-work; die & punch assembly,
cutting and forming, its application; Hot-working versus cold-working; Introduction to Plastics:
Types, Machines: Injection Moulding.
Casting: Pattern & allowance; Molding sands its desirable properties; Mould making with the use of
core; Gating system, Casting defects & remedies; Cupola Furnace, Die-casting and its uses.

Machining: Basic principles of Lathe-machine and operations performed on it; basic description of
machines and operations of Shaper-Planner, Drilling, Milling & Grinding.
Welding: Importance & basic concepts of welding; Classification of welding processes: Gas-
welding, types of flames and principle; Electric-Arc welding; Resistance welding; Soldering, &
Brazing and its uses.
Unconventional Manufacturing Process: Limitations of conventional manufacturing process; need
of unconventional manufacturing processes; Basic Principles and working of unconventional
manufacturing process and their applications; Electro-Discharge machining; Electro-chemical
machining; Ultrasonic machining; Abrasive jet machining; Water jet machining;, Laser cutting and
Laser beam welding.

Super Finishing Processes: Introduction; Lapping; Honing; Buffing; Burnishing; Powder coating;
Polishing
Text Books
1. Hajra & Bose, Workshop Technology, Vol 1 & 2, Roy Media Promoters.
2. Pandey & Singh, Production Engineering Science, Standard Publishers.
3. R.K. Jain, Production technology, Khanna publishers.
Reference Books
1. Raghuvanshi, B.S., Workshop Technology, Vol 1 & 2, Dhanpat Rai & Sons.
2. Laxmi Narayan & Vaish W, A Text Book of Practical Geometrical Drawing, Pearson Education.

Semester II/I
COMPUTER BASICS & C PROGRAMMING
Course Code: ECS201/ECS101 L T P C

3 0 0 3
Objective:
 To learn the basics of computers & C programming language.
Course Contents:
Concepts in Computer Application: Definition of Electronic Computer; History; Generations;
Characteristics and Application of Computers; Classification of Computers; Functional
Component of Computer: CPU, I/O devices, Type of Memory & Memory Hierarchy, Firmware
and Human ware.
Data and data types: Definitions, data, data types: Integer, Character, Float, String, etc.;
Constants and Variable Declaration; Token; Keyboard; Identifier.

Programming Language Classification & Computer Languages: Generation of Languages;
Introduction to 4GLs; Translators; Assemblers; Compilers; Interpreters.
Number System: Decimal, Octal, Binary and Hexadecimal & their Conversions; Various Code:
BCD, ASCII and EBCDIC and Gray Code.
Operators and Expressions: Numeric and relation operators; logical operator; bit operator;
operator precedence and associativity.

Internet and Web Technologies: Hypertext Markup Language; WWW; Gopher; FTP; Telnet; Web
Browsers; Search Engines; Email.
Control Structure: while statement, if, else, Nested if else statement. Nested logic: for loop, do-
while loop, loop inside a loop structure, Switch Statement. Break and default with switch.

Concepts in Operating Systems: Elementary Concepts in Operating Systems; Textual Vs GUI
Interface.
Arrays: Notation and representation; Manipulation of array elements; Multidimensional arrays.

Functions & Strings: Definition; Declaration; Call by Value; Call by Reference; Returns values
and their types; Function calls
Text Books
1. Sinha P. K., Computer Fundamentals, BPB Publications.
2. Yadav, DS, Foundations of IT, New Age.
3. Curtin, Information Technology: Breaking News, Tata McGraw Hill.
4. Rajaraman,R, Introduction to Computers, Prentice Hall of India.
Reference Books
1. Peter Nortans, Introduction to Computers, Tata McGraw Hill.
2. Leon & Leon, Fundamental of Information Technology, Vikas Publishing.
3. Kanter, Managing Information System, Prentice-Hall.
4. CISTems, Internet: An Introduction, Tata McGraw Hill.

Semester II/I
ENVIRONMENTAL SCIENCE

3 0 0 3
Objective: To create awareness among students about environment protection.

Introduction: Definition, Scope, Segments of Environment and its Multidisciplinary Nature; Some
Major Environmental Problems; Definition and Scope of Ecology.

Ecology And Environment: Concept of an Ecosystem- its components and functions; Trophic Levels-
Producer; Consumer and Decomposer; Energy Flow in an Ecosystem; Biogeochemical Cycles; Food
Chain; Food Web and Ecological Pyramid.

Air & water pollution: Various segments of Atmosphere and their Significance; Sources and Effects
of Air Pollution; Sources of Air Pollution: Photochemical Smog, Acid Rain, Global Warming, Ozone
Layer - Its Depletion and Control Measures; Sources of Water Pollution; Treatment of Water
Pollution; Eutrophication.

Soil & Thermal pollution: Soil pollution: Sources and Consequences; Solid Wastes – Pollution;
Treatment & Disposal.
Thermal - sources and consequences; Sustainable Development; Dams and Reservoirs- Their Benefits
and Problems.

Biodiversity & its conservation
Bio-Diversity Hot-spots of Biodiversity in India and World; Conservation; Importance and Factors
Responsible for Loss of Biodiversity; Deforestation- causes and effects; Biogeographical
Classification of India; Environment Conservation Movement in India (Chipko Movement, Appiko
Movement), Bioremediation; Biological Magnification.
Text Books
1. De A.K., Environmental Chemistry, New Age Publishers Pvt. Ltd.
2. Masters, G.M., Introduction to Environmental Engineering and Science, Prentice Hall India
Pvt. Ltd.
3. Odum, E.P., Fundamentals of Ecology, W. B. Sannders Co.
Reference Books
1. Bryant,P.J., Biodiversity and Conservation, Hypertext Book.
2. Tewari, Khulbe & Tewari, Textbook of Environment Studies, I.K. Publication.
3. Trivedi, R.K., Handbook of Environmental Laws, Rules, Guidelines, Compliances and
Standards, Vol I and II, Environment Media.

Semester II/I
BASIC ELECTRICAL ENGINEERING

3 0 0 3
Objective
 To understand the fundamental concept of Electrical Engineering like DC Network, AC
Network, Measuring Instruments, Energy Conversion Devices etc.
Course Contents

D.C. Network Theory: Circuit theory concepts-Mesh and node analysis; Network Theorems-
Superposition theorem, Thevenin’s theorem, Norton’s theorem and Maximum Power Transfer
theorem; Star Delta transformation.

Steady State Analysis of A.C. Circuits: Sinusoidal and phasor representation of voltage and
current; Single phase A.C. circuit behaviour of resistance, inductance and capacitance and their
combination in series & parallel; Power factor; Series and parallel resonance; Band width and
quality factor; magnetic circuit.

Measuring Instruments: Construction and principles of operation of voltage and current measuring
instruments; introduction to power and energy meters.
Three Phase A.C. Circuits: Star-Delta connections; Line and phase voltage/current relations; Three
phase power and its measurement.

Transformer: Principle of operation; Types of construction; Phasor diagram; Equivalent circuit;
Efficiency and voltage regulation of single phase transformer; Open and short circuit tests.
D.C. Machines: Principles of electromechanical energy conversion; Types of D.C. machines;
E.M.F. equation; Magnetization and load characteristics; Losses and efficiency; Starter and speed
control of D.C. Motors; Motor applications.

Three phase induction Motor: Principle of operation; Types and methods of starting; slip-torque
characteristics; Applications.
Synchronous Machines: Principle of Operation of Alternator and synchronous motor
Single phase Motors: Principle of operation and methods of starting of induction motor,
Text Books
1. V. Del Toro, Principles of Electrical Engineering, Prentice-Hall International.
2. W.H. Hayt & J.E. Kemmerly, Engineering Circuit Analysis, McGraw Hill.
Reference Books
1. Nagrath I.J., Basic Electrical Engineering, Tata McGraw Hill.
2. Fitzgerald A.E & Higginbotham ., D.E., Basic Electrical Engineering, McGraw Hill.
3. A Grabel, Basic Electrical Engineering, McGraw Hill.
4. Cotton H., Advanced Electrical Technology, Wheeler Publishing.

Semester II/I
BASIC ELECTRONICS ENGINEERING

3 0 0 3
Objective
 To understand the basic concept of Electronics Engineering like p-n Junction, Bipolar
Junction Transistor, Field Effect Transistor, Operational Amplifier etc.
Course Contents

p-n Junction: Properties of Elements; Crystal Structure; Energy band diagram; Introduction to PN-
Junction; Depletion layer; V-I characteristics Diode Ratings (average current, peak-inverse voltage);
p-n junction as rectifiers (half wave and full wave) & filter; calculation of ripple factor and load
regulation; clipping and clamping circuits; Zener diode and its application as shunt regulator.

Bipolar Junction Transistor (BJT): Basic construction; transistor action; CB, CE and CC
configurations; input/output characteristics; Biasing of transistors: Fixed bias, emitter bias, potential
divider bias; Graphical analysis of CE amplifier; concept of Voltage gain current gain; λ-parameter
model (low frequency); Computation of Ai, Av, Ri & Ro of single transistor CE amplifier
configuration.

Field Effect Transistor (FET): Basic construction of JFET; Principle of working; concept of pinch-
off maximum drain saturation current; input and transfer characteristics; Characteristics equation;
CG, CS and CD Configuration; fixed and self biasing of JFET amplifier Introduction of MOSFET;
Depletion and Enhancement type MOSFET- Construction; Operation and Characteristics.

Operational Amplifier (Op-Amp): Concept of ideal operational amplifier; ideal and practical Op-
Amp parameters; inverting, non-inverting and unity gain configurations; Applications of Op-Amp as
adders, difference amplifiers, integrators and differentiator.

Switching Theory: Number system; conversion of bases (decimal, binary, octal and hexadecimal
numbers); Adder & Subtraction; BCD numbers; Seven Segment Display; Boolean Algebra; Logic
gates; Concept of universal gates; Canonical forms; minimization using K-Map
Text Books
1. Robert Boylestad & Louis Nashelsky, Electronic Circuit and Devices, Pearson India.
2. Millman & Halkias, Integrated Electronics, McGraw Hill.
3. Millman & Halkias, Electronics Devices and Circuits, McGraw Hill.
4. Morris Mano M., Digital Design, Prentice Hall.
Reference Books
1. Sedra and Smith, Microelectronic Circuits, Oxford University Press .
2. Gayakwad, R A, Operational Amplifiers and Linear Integrated circuits, Prentice Hall of
India Pvt. Ltd.
3. Chattopadhyay D and P C Rakshit, Electronics Fundamentals and Applications, New Age
International.

Semester-II
FOUNDATION ENGLISH - II
Course code: EHM 201 L T P C

2 0 2 3
(Common with BPH206/BBA206/BCA206/BHM201/AR207/BCH206/BFA203)

Functional Grammar: Articles, Preposition, Tenses: Functions, Synthesis, Transformation,
Spotting errors and correction of sentences.

Pre- Requisites of Technical written Communication: One word substitution, Spelling rules,
Words often confused & misused, Phrases.

The Structure of sentences/ clauses: Adverb clause, Adjective clause, Noun clause. Sentences:
Simple, Double, Multiple and complex, Transformation of sentences: simple to complex & vice
versa, simple to compound & vice-versa, Interrogative to assertive & negative & vice-versa.

Technical Communication: Nature, Origin and Development, Salient features, Scope &
Significance, Forms of Technical Communication, Difference between Technical Communication &
General writing, Objective Style vs. Literary Composition
Text-Books:
1. Wren & Martin, High School English Grammar & Composition – S. Chand & Co.
2. Raman Meenakshi & Sharma Sangeeta, Technical Communication-Principles & Practice,
Oxford University Press, New Delhi, 2007.
3. Mitra Barum K., Effective Technical Communication, Oxford University Press, New Delhi.
4. Better Your English- A Workbook for 1st year Students- Macmillan India.
Reference Books:
1. Horn A.S., Guide to Patterns & Usage in English, Oxford University Press, New Delhi.
NOTE:

Semester II/I
PHYSICS (LAB)

0 0 3 1.5
LIST OF EXPERIMENTS
1) To determine the wavelength of Sodium light by Newton’s rings.
2) To determine the wavelength of Sodium light by Fresnel’s Biprism.
3) To determine the Specific Rotation of the Cane sugar solution with the help of Polari meter.
4) To determine the wavelength of the sodium light by Michelson’s interferometer.
5) To study the PN junction characteristics.
6) To determine the high resistance by Leakage method.
7) To study the energy band gap by four probe method.
8) To study the variation of magnetic field using Stewart and Gee’s apparatus.
9) To determine the frequency of A.C. mains by means of a Sonometer.
10) To study the Hall Effect.

Evaluation scheme:

(10 MARKS)
MARKS)


(50 MARKS)

Semester II/I
CHEMISTRY (LAB)

0 0 3 1.5
LIST OF EXPERIMENTS
1. To determine total alkalinity in the given water sample.

2. To determine the temporary and permanent hardness in water sample using EDTA as
standard solution.
3. To determine the available chlorine in bleaching powder solution.
4. To determine the chloride content in the given water sample by Mohr’s method.
5. To determine the pH of the given solution using pH meter and pH-metric titration.
6. To determine the Equivalent weight of Iron by the chemical displacement method.
7. To determine the Viscosity of an addition polymer like polyester by Viscometer.
8. To determine the dissolved oxygen present in a water sample.
9. To prepare the Bakelite resin polymer.
10. To determine the viscosity of a given sample of a lubricating oil using Redwood Viscometer.
11. To determine the carbon dioxide content in polluted water sample.
12. To find chemical oxygen demand of waste water sample by potassium dichromate.
13. To determine the total hardness in water sample using complexometric method.
14. To determine the iron content in the given sample using external indicator.
15. To determine the strength of given HCL solution by titrating against N/10 Standard Sodium
hydroxide solution.
Note: Minimum of 10 experiments has to be completed for completion of curriculum.

Evaluation scheme:
(10 MARKS)
MARKS)


(50 MARKS)

Semester II/I
ENGINEERING MECHANICS (LAB)

0 0 3 1.5
(Any 10 experiments of the following or such experiments suitably designed)
LIST OF EXPERIMENTS
1. To conduct the tensile test and determine the ultimate tensile strength, percentage elongation for a
steel specimen.
2. To conduct the compression test and determine the ultimate compressive strength for a specimen.
3. To conduct the Impact test on Impact-testing machine to find the toughness by Charpy impact test.
4. To conduct the Impact-test on Impact-testing machine to find the toughness by Izod impact Test.
5. To determine the hardness of the given specimen using Rockwell hardness testing machine.
6. To determine the hardness of the given specimen using Brinell hardness testing machine.
7. To determine gear ratio of simple and compound gear train.
8. To determine the mechanical advantage of worm and worm wheel for load lifting.
9. To find the coefficient of friction on inclined plane.
10. To perform torsion test for rod on torsion testing machine.

point scale which would include the practical conducted by the students and a Viva voce taken by the
Evaluation scheme:

(10 MARKS)
MARKS)


(50 MARKS)

Semester II/I
COMPUTER BASICS & C PROGRAMMING (LAB)
Course Code: ECS 251/ 151 L T P C

0 0 3 1.5
Course Contents
1. To write a program to calculate Sum & average of N numbers.
2. To write a program to convert integer arithmetic to a given number of day and month.
3. To write a program to find maximum and minimum out of 3 numbers a, b & c.
4. To write a program to find factorial of positive integer.
5. To write a program to find sum of series up to n number, 2+5+8+…………………+n.
6. To write a program to print all the number between 1 to 100 which are dividing by 7.
7. To write a program to generate Fibonacci series up to n.
8. To write a program to implement a function to calculate area of a circle.
9. To write a program to implement a recursive function to calculate factorial of given number.
10. To write a program to find whether number is prime or not.
11. To write a program to find that the enter character is a letter or digit.
12. To write a program to find addition of two matrix of n*n order.
13. To write a program to find multiplication of two matrix of n*n order.
14. To write a program to add 6 digit numbers in even case & multiple 6 digit number in odd case.
15. To write a program to find even or odd up to a given limit n.
16. To write a program to find whether a given no is palindrome or not.
17. To write a program to joining & Comparing the 2 string.
Evaluation scheme:

(10 MARKS)
MARKS)


(50 MARKS)

Semester II/I
ENGINEERING DRAWING (LAB)

0 0 4 2
1. To write all Numbers (0 to 9) and alphabetical Letters (A to Z) as per the standard dimensions.
2. To draw the types of lines and conventions of different materials.
3. To draw and study dimensioning and Tolerance.
4. To construction geometrical figures of Pentagon and Hexagon
5. To draw the projection of points and lines
6. To draw the Orthographic Projection of given object in First Angle
7. To draw the Orthographic Projection of given object in Third Angle
8. To draw the sectional view of a given object
9. To draw the development of the lateral surface of given object
10. To draw the isometric projection of the given orthographic projection.
Reference Books
1. Bhatt. N.D., Elementary Engineering Drawing, Charothar Publishing.
2. Narayana K.L. & Vaish W., A Text Book of Practical Geometry on Geometrical Drawing, Pearson
Education.

Each sheet prepared would be evaluated by the faculty concerned on the date of preparing the sheet
on a 5 point scale which would include the sheet drawn by the students and a Viva voce taken by the
faculty concerned. The marks shall be entered on the index sheet.
Evaluation scheme:

(10 MARKS)
MARKS)


(50 MARKS)

Semester II/I
WORKSHOP PRACTICE (LAB)
0 0 4 2
List of Experiments
Perform any ten experiments selecting at least one from each shop.
Carpentry Shop:
1. To prepare half-lap corner joint.
2. To prepare mortise & tenon joint.
3. To prepare a cylindrical pattern on woodworking lathe.
Fitting Bench Working Shop:
1. To prepare a V-joint fitting
2. To prepare a U-joint fitting
3. To prepare a internal thread in a plate with the help of tapping process
Black Smithy Shop:
1. To prepare a square rod from given circular rod
2. To prepare a square U- shape from given circular rod
Welding Shop:
1. To prepare a butt and Lap welded joints using arc welding machine.
2. To prepare a Lap welded joint Gas welding equipment.
3. To prepare a Lap welded joint using spot welding machine.
Sheet-metal Shop:
1. To make round duct of GI sheet using ‘soldering’ process.
2. To prepare a tray of GI by fabrication
Machine Shop:
1. To prepare a bolt on the lathe machine as per given. diagram
2. To prepare a job on the lathe machine as per given diagram.
Foundry Shop:
1. To prepare core as per given size.
2. To prepare a mould for given casting.
Evaluation scheme:
(10 MARKS)
MARKS)

Semester II/I
BASIC ELECTRICAL ENGINEERING (LAB)

0 0 3 1.5
LIST OF EXPERIMENTS
1. To verify the Kirchhoff’s current and voltage laws.

2. To verify the Superposition theorem.
3. To verify the Thevenin’s theorem.
4. To verify the Norton’s theorem.
5. To verify the maximum power transfer theorem.
6. To determine the efficiency of single-phase transformer by load test.
7. To determine the external characteristics of DC Shunt generator.
8. To measure current and speed for speed control of D.C. Shunt Motor.
9. To measure the power in a 3-phase system by two-wattmeter method
10. To measure the power factor in an RLC by varying the capacitance.

Evaluation scheme:

(10 MARKS)
MARKS)


(50 MARKS)

Semester II/I
BASICS ELECTRONICS ENGINEERING (LAB)

0 0 3 1.5
LIST OF EXPERIMENTS
1. To study the V-I characteristics of p-n junction diode.

2. To study the diode as clipper and clamper.
3. To study the half-wave & full-wave rectifier using silicon diode.
4. To study transistor in Common Base configuration & plot its input/output characteristics.
5. To study transistor in Common Emitter configuration & plot its input/output characteristics. .
6. To study the operational amplifier in inverting & non inverting modes using IC 741.
7. To study the operational amplifier as differentiator & integrator.
8. To study the Zener diode as a shunt regulator.
9. To study various logic gates & verify their truth tables.
10. To study half adder/full adder & verify their truth tables.

Evaluation scheme:

(10 MARKS)
MARKS)


(50 MARKS)

Semester III /IV
MATHEMATICS-III
3 1 0 4
Course Contents
Integral Transforms: Fourier integral, Fourier complex transform, Fourier sine and cosine transforms
and applications to simple heat transfer equations.
Z – Transform and its application to solve difference equations.

Functions of a Complex Variable: Analytic functions; C-R equations and harmonic functions; Line
integral in the complex plane; Cauchy's integral theorem, Cauchy's integral formula for derivatives
of analytic functions; Liouvilles theorem.

Functions of a Complex Variable II: Representation of a function by power series; Taylor's and
Laurent's series; Singularities, zeroes and poles; Residue theorem, evaluation of real integrals;
conformal mapping and bilinear transformations.

Statistical Techniques: Moments, Moment generating functions, Skewness, Kurtosis, Curve Fitting
and Solution of Equations: Method of least squares and curve fitting of straight line and parabola,
Solution of cubic and bi-quadratic equations, Correlation and Regression, Binomial distribution,
Poisson distribution, Normal distribution.

Numerical Technique: Bisection method, Regula – Falsi method, Newton - Raphson method.
Interpolation: Finite difference, Newton’s forward and backward interpolation, Lagrange’s and
Newton’s divided difference formula for unequal intervals; Numerical Differentiation, Numerical
Integration; Trapezoidal, Simpson’s 1/3 and 3/8 rule.
Text Books
1. B.S Grewal., Higher Engineering Mathematics, Khanna Publishers.
2. C Prasad., Engineering Mathematics for Engineers, Prasad Mudralaya.
3. H.K Das., Engineering Mathematics Vol-II, S. Chand.
Reference Books
1. E Kreyszig., Advanced Engineering Mathematics, Wiley Eastern.
2. N Piskunov, Differential & Integral Calculus, Moscow Peace Publishers.
4. N.P Bali., Engineering Mathematics-III, Laxmi Publications.

Semester III/IV
PHYSICS II
3 1 0 4
Objective: To understand modern physics like nanotechnology, cryogenics etc.
Course Contents
Relativistic Mechanics: Inertial and Non- inertial Frames; Michelson-Morley Experiment;
Postulates of Special Theory of Relativity; Galilean and Lorentz Transformation; Length Contraction
and Time Dilation; Addition of Velocities; Mass Energy Equivalence and Variation of Mass with
Velocity.

Modern Physics: Bragg’s Law; Compton Effect; Wave Particle Duality; De Broglie matter wave;
Davisson and Germer's Experiment; Phase and Group velocities; Uncertainty Principle and
application.

Quantum Mechanics II : Physical Interpretation of Wave Function and its Normalization;
Expectation Value; Schrodinger Equation in One Dimension; Solutions of Time-Independent
Schrodinger Equation for Free Particle; Particle in an Infinite Square Well; Potential Barrier and
Tunneling; Hydrogen atom (qualitative).

Superconductivity: Temperature dependence of resistivity; Meissner effect; Penetration depth;
Type I and Type II superconductors; Temperature dependence of critical filed; BCS theory of
superconductors; applications of superconductors.
Introduction to Nanomaterials: Basic principles of nanoscience and technology; creation and use
of buckyballs; properties and use of carbon nanotubes; applications of nanomaterials.

Vacuum Physics: Mean free path; rotary and diffusion pumps; Pirani and Penning Gauges.
Nuclear Physics: Nuclear Forces; Binding Energy; Liquid Drop Model; Fission; Nuclear Reactors;
Fusion and Energy Processes in Stars, Controlled Thermonuclear Reactions.
Text Books:
1. Robert Resmick, Introduction to Special Theory of Relativity, Wiley.
2. A. Beiser, Perspectives of Modern Physics, Mc.- Graw Hill.
3. R.Booker and E. Boysen, Nanotechnology, Wiley.
4. G. G. Haselden, Cryogenic Fundamentals, Academic Press.

Semester III
CIRCUIT THEORY
Course Code: EEE301 L T P C
3 0 0 4
Objective:
 To study the basics of circuit theory laws and their applications.
 To understand the AC & DC circuit theory concepts and its solutions.
 To gain the knowledge on transient analysis
Course Contents
Basics of Circuits: Ideal sources, Dependent and Independent sources; Linear relation between
voltage and current of Network elements; Source Transformation; Types of Networks, Network
reduction; Voltage division, Current division; Star – delta transformation; Concept of duality, Dual
networks.

Coupled Circuits: Self Inductance, Mutual Inductance, Coefficient of coupling; Dot rule; Ideal
transformer; Effective inductance of coupled coils in series & parallel, Analysis of coupled circuits.

Single -Phase Circuits: Inductors and capacitors in series & parallel combination; Voltage, current
and power relations in RL, RC, and RLC circuits; Nodal and mesh analysis in AC circuits.

Three- Phase Circuits: Three phase circuits, Balanced circuits, Star and delta connected loads;
phase sequence; unbalanced circuits, solution of unbalanced star and delta connected loads; Power
measurement by two wattmeter method.

Transient Analysis: Source free and forced response of RL, RC & RLC circuits; Time constant and
natural frequency of oscillations; Applications of Laplace transformation to RL, RC & RLC circuits.
Text Books:
1. W H Hayt, J E Kemmerly, Engineering Circuit Analysis, McGraw Hill, 2002.
2. R C Dorf, J Svoboda, An Introduction to Electric Circuits, Wiley, 2006.
Reference Books:
1. S D Senturia, B.D Wedlock, “Electronic Circuits and Applications”, Wiley, 1975
2. J W Nilsson, S A Riedel, “Electric Circuits”, Prentice Hall, 2000.

Semester III
ELECTRICAL MEASUREMENTS & MEASURING INSTRUMENTS-I
3 0 0 3
Objective:
 To study electrical instruments like ammeters, voltmeters, wattmeters, AC Potentiometer,
CRO etc.
Course Contents
Philosophy of Measurement: Methods of Measurement, Measurement Systems; Classification of
Instruments; Characteristic of Instruments & Measurement systems; Errors in Measurement & their
Analysis.

Analog Measurement of Electrical Quantities: Electrodynamic, Thermocouple, Electrostatic &
rectifier type Ammeters & Voltmeters; Electrodynamic Wattmeter, Three Phase Wattmeter, Power
in three Phase System, Errors & remedies in Wattmeter.

Measurement of Resistance, Capacitance and Inductance: Different methods of measuring low,
medium and high resistances; Measurement of Inductance & Capacitance with the help of AC
Bridge; Q Factor Measurement.

AC Potentiometer: Polar type & Co-ordinate type AC potentiometers; Applications of AC
Potentiometers in Electrical Measurement.
Magnetic Measurement: Ballistic Galvanometer; Flux meter; Determination of Hysteresis loop;
Measurement of iron losses.

Digital Measurements of Electrical Quantities: Concept of Digital Measurement, Block Diagram:
Digital Voltmeter, Frequency meter, Power analyzer and harmonics analyzer, Electronic Multi-
meter.
Cathode Ray Oscilloscope: Basic CRO circuit (Block Diagram), Cathode ray tube (CRT) & its
component, Application of CRO in measurement, Lissajous Patterns, Dual trace &Dual beam
Oscilloscopes.
Text Book:
1. A.K. Sawhney, “Electrical & Electronic Measurement & Instrument”, Dhanpat Rai &
Sons,India.
2. E.W. Golding & F.C. Widdis, “Electrical Measurement & Measuring Instrument”,
A.W.Wheeler& Co. Pvt. Ltd. India.
Reference Books:
1. Forest K. Harries, “Electrical Measurement”, Willey Eastern Pvt. Ltd. India.
2. M.B. Stout, “Basic Electrical Measurement” Prentice hall of India, India.
3. W.D. Cooper, “Electronic Instrument & Measurement Technique”, prentice hall International.
4. Rajendra Prashad, “Electrical Measurement &Measuring Instrument”, Khanna Publisher.
5. J.B. Gupta, “Electrical Measurements and Measuring Instruments”, S.K. Kataria & Sons.

Semester III
ELECTRICAL MACHINES-I
3 0 0 3
Objective:
 To understand the principles of electromechanical energy conversion.
 To study the principles of operation of DC Machines, Transformers etc.
Course Contents
Principles of Electromechanical Energy Conversion: Flow of Energy in Electromechanical
Devices; Energy in Magnetic Systems; Singly Excited Systems, Determination of Mechanical Force,
Mechanical Energy, Torque Equation; Doubly Excited Systems, Energy Stored in Magnetic Field,
Electromagnetic Torque; Generated EMF in Machines; Torque in Machines with Cylindrical Air
Gap.

D.C. Machines: Construction of DC Machines, Armature winding; EMF and Torque equation;
Armature reaction; Commutation, Inter poles and Compensating windings; Performance
characteristics of D.C. generators.

D.C. Machines (Contd.): Performance characteristics of D.C. motors; Starting of D.C. motors,
Concept of starting (3 point and 4 point starters); Speed control of D.C. motors, Field control,
Armature control and Voltage control (Ward Lenonard method); Efficiency and Testing of D.C.
machines (Hopkinson’s and Swinburn’s Test).

Transformer: Three-phase transformer Construction; Three-phase unit transformer and Bank of
three single-phase transformers with their advantages; Three-phase transformer Groups (Phasor
groups) and their connections; Y-Connection, Open delta connection, Three-phase/ 2 phase Scott
connection and its application.

Transformer (Contd.): Sumpner’s test ; All day efficiency; Polarity test; Excitation Phenomenon in
Transformers, Harmonics in single-phase and 3-phase transformers; Parallel operation and load
sharing of single-phase and three-phase transformers ; Three-winding transformers, Tertiary
winding.
Auto Transformer: Single phase Auto-transformer, Volt-amp relation, Efficiency, Conversion of a
two-winding Transformer to an Auto-transformer, Saving in conductor material, Advantages,
disadvantages and applications of auto-transformers.
Text Books:
1. I.J Nagrath. & D.P.Kothari, Electrical Machines, Tata McGraw Hill.
2. Ashfaq Husain, Electrical Machines, Dhanpat Rai & Sons.
3. Irving L.Kosow, Electric Machine and Transformers, Prentice Hall of India.
4. B.R Gupta, & Vandana Singhal, Fundamentals of Electrical Machines, New Age International.
Reference Books:
1. A.E Fitggerald. C.Kingsley Jr & Alexander Kusko, Electric Machinery, McGraw Hill.
2. A.E Clayton, The Performance and Design of DC Machines, Pitman & Sons.
3. M.G. Say, “The Performance and Design of AC Machines”. Pit man & Sons.
4. A.S Langsdorf, ”Theory of Alternating Current Machinery”, Tata McGraw Hill.

Semester III
DIGITAL LOGIC & CIRCUIT
Course Code: EEC301 L T P C
3 0 0 3
Objective:
 To understand the digital system and how the digital system has been developed.
 To study about the various logic families used to build up the digital system.
Course Contents
Number Systems: Binary, Octal, Hexadecimal and their inter-conversion; Binary Arithmetic:
Addition, Subtraction, Multiplication and Division; Diminished radix and radix compliments; Codes:
BCD codes, 8421 code, Excess-3 code, Gray code, error detection and correction, Hamming code.

Boolean Algebra: Basic Theorems and properties of Boolean Algebra, Boolean Functions,
Canonical and Standard forms, Digital Logic Gates: NAND and NOR implementation, Ex-OR
functions K map:, Two, Three, Four and Five variable maps, Sum of products and Product of Sums
Simplification, , The tabulation method, Determination of Prime implicates, Selection of Essential
Prime implicates.

Logic Families: TTL, IIL, DTL and ECL etc., working and their characteristics, MOS and CMOS
devices. Binary adder and subtractor, Multiplexers, Decoders, Demultiplexers, Programmable Logic
Arrays: Programmable Array Logic. Implementation of Combinatorial Logic using these devices.

Flip-flops: R, JK, D, T flip-flops, master slave flip-flop. Flip-flop excitation table, Classification of
sequential circuits, Registers, Counters, Sequence Detector and Sequence Generator.

Memory: Organization, Classification and characteristics of memories, Sequential memories,
ROMs, R/W memories. Content addressable memories, Charged-Coupled device memory.
Text Books:
1.A.P Godse, “Switching Theory”, Technical Publication.
2. M. Morris Mano, “Digital Design”, Prentice Hall of India.
3. Thomas Downs and Mark F Schulz, “Logic Design”, Van Nostrand Reinhold.
Reference Books:
1. Malvino and Leach “Digital principle and applications” Tata McGraw Hill
2. Cheung “Modern digital systems design” (WPC)

Semester III
ENGINEERING ELECTROMAGNETICS
3 1 0 4
Objective:
 To study about Electromagnetic Field Theory Comprising of Electrostatics, Electrodynamics,
Magneto Statics etc.
Course Contents
Unit-I (Lectures 08)
Coordinate systems and transformation: Cartesian coordinates, Cylindrical coordinates, Spherical
coordinates; Vector calculus: Differential length, area and volume; Line, surface and volume
integrals; Del operator; Gradient of a scalar; Divergence of a vector and divergence theorem; Curl of
a vector and Stokes’ theorem; Laplacian of a scalar.
Unit-II (Lectures 08)

Electrostatics: Electrostatic fields; Coulomb’s law and field intensity; Electric field due to charge
distribution; Electric flux density; Gauss’ Law; Electric dipole and flux lines; energy density in
electrostatic fields.
Electric field in material space: Properties of materials; Convection and conduction currents;
Conductors; Polarization in dielectrics; Dielectric constants; Continuity equation and relaxation time;
Boundary conditions.
Electrostatic boundary value problems: Poisson’s and Laplace’s equations; General procedures
for solving Poisson’s and Laplace’s equations; Resistance and capacitance; Method of images.
Unit-III (Lectures 08)

Plane Waves: Maxwell’s equations; Wave equation in an isotropic homogeneous medium and its
solution: Phasor notation, Polarization of waves, Reflection and refraction of plane waves at plane
boundaries; Poynting vector.
Unit-IV (Lectures 08)

Waveguides: Electromagnetic fields: Parallel-plate, Rectangular and circular waveguides; TE and
TM modes; Wave impedance; Wave velocities; Attenuation in waveguides.
Unit-V (Lectures 08)

Planar Transmission Line: Electromagnetic fields: Strip-lines, Micro-strip-lines, Co-planar
waveguides; Transmission line parameters; Transmission line equations; Input impedance; Standing
wave ratio and power; Smith chart; Some applications of transmission lines.
Cavity Resonators: Electromagnetic fields in rectangular and cylindrical resonators; Degeneracy of
modes.
Text books
1. E.C.Jordan, K.G. Balmain: “E.M.Waves & Radiating Systems”, Pearson Education, 2006
2. William H. Hayt, John A. Buck “Engineering Electromagnetics“, McGraw-Hill Publishing Co.;
6th Edition edition (July 1, 2001)
3. Kraus, J.D. and Fleisch, D.A., Electromagnetics with Applications, McGraw Hill.1999.
4. Matthew N.O.Sadiku, Principles of Electromagnetics, Oxford University Press, 4th edition
Reference Books
1. Kaduskar, “Principles of Electromagnetics”, Wiley India
2. IDA, “Engineering Electromagnetics”, Springer
3. Kodali, “Engineering Electromagnetic Compatibility”, John Wiley & sons

Semester III
ELECTRICAL MEASUREMENTS & MEASURING INSTRUMENTS-I (LAB)
0 0 3 1. 5
LIST OF EXPERIMENTS
Note: Minimum ten experiments should be performed from the following:
1. To calibrate the ammeter and voltmeter.

2. To measure the self inductance by Maxwell’s Bridge.
3. To measure the self inductance by Hay’s Bridge.
4. To measure the self inductance by Anderson’s Bridge.
5. To measure the self inductance by Owen’s Bridge.
6. To measure the self capacitance by Schering Bridge.
7. To measure the self capacitance by De-Saudy’s Bridge.
8. To measure the low resistance by Kelvin’s Double Bridge.
9. To trace out the transient response of RLC series circuits using storage type CRO.
10. To trace out the transient response of RLC parallel circuits using storage type CRO
11. To Measure the frequency of sine, triangular, square wave signal generated by a function
generator and verify its frequency at 100 Hz tap point using “labview” software.
12. To Measure the voltage and current level of the signal generated by programmable power
supply.

Each experiment would be evaluated by the faculty concerned on the date of the experiment on a 5-
Evaluation scheme:
PRACTICAL PERFORMANCE & VIVA ATTENDANCE QUIZ VIVA TOTAL

DURING THE SEMESTER (30 MARKS) (5 MARKS) (5 MARKS) (10 MARKS) INTERNAL
EXPERIMENT FILEWORK VIVA (50 MARKS)
(10 MARKS) (10 MARKS) (10 MARKS)



Semester III
ELECTRICAL MACHINES - I (LAB)
0 0 3 1. 5
LIST OF EXPERIMENTS
1. To obtain load characteristics of a dc shunt generator.

2. To obtain load characteristics of a dc series generator.
3. To obtain load characteristics of a dc compound generator
(a) Cumulatively compounded.
(b) Differentially compounded.
4. To obtain speed – torque characteristics of a dc shunt motor
5. To obtain speed – torque characteristics of a dc shunt motor
6. To determine the efficiency of the DC machines by Hopkinson test.
7. To plot the characteristics of a DC shunt motor using armature & field control methods.
8. To determine the efficiency and losses by O.C. and S.C. tests on a single phase transformer
9. To determine the efficiency & voltage regulation of a single-phase transformer using Sumpner’s
(back to back) test.
10. To perform the open circuit (O.C.) and short circuit (S.C.) tests on a single-phase transformer.
11. To perform the open circuit (O.C.) and short circuit (S.C.) tests on a three-phase transformer.
12. To obtain 3-phase to 2-phase conversion by Scott connection.

Each experiment would be evaluated by the faculty concerned on the date of the experiment on a 5-
Evaluation scheme:




Semester III
DIGITAL LOGIC & CIRCUIT (LAB)
0 0 3 1. 5
LIST OF EXPERIMENTS
1) To study combinational circuits: Multiplexer, Demultimplexer and Encoder and to verify truth
tables of various logic functions.
2) Study of various combinational circuits based on: AND/NAND Logic blocks and OR/NOR
Logic blocks.
3) To study various waveforms at different points of a transistor bistable multivibrator and its
frequency variation with different parameters.
4) To design a frequency divider using IC-555 timer.
5) To study various types of registers and counters.
6) To study Schmitt trigger circuit.
7) To study transistor as table multi-vibrator.
8) Experimental study of characteristics of CMOS integrated circuits.
9) Interfacing of CMOS to TTL and TTL to CMOS.
10) BCD to binary conversion on digital IC trainer.
11) Testing of digital IC by automatic digital IC trainer.
12) To study OP-AMP as Current to Voltage & Voltage to Current converters & comparator.

Evaluation scheme:




Semester IV /III
MATHEMATICS-III
3 1 0 4
Course Contents
Integral Transforms: Fourier integral, Fourier complex transform, Fourier sine and cosine transforms
and applications to simple heat transfer equations.
Z – Transform and its application to solve difference equations.

Functions of a Complex Variable: Analytic functions; C-R equations and harmonic functions; Line
integral in the complex plane; Cauchy's integral theorem, Cauchy's integral formula for derivatives
of analytic functions; Liouvilles theorem.

Functions of a Complex Variable II: Representation of a function by power series; Taylor's and
Laurent's series; Singularities, zeroes and poles; Residue theorem, evaluation of real integrals;
conformal mapping and bilinear transformations.

Statistical Techniques: Moments, Moment generating functions, Skewness, Kurtosis, Curve Fitting
and Solution of Equations: Method of least squares and curve fitting of straight line and parabola,
Solution of cubic and bi-quadratic equations, Correlation and Regression, Binomial distribution,
Poisson distribution, Normal distribution.

Numerical Technique: Bisection method, Regula – Falsi method, Newton - Raphson method.
Interpolation: Finite difference, Newton’s forward and backward interpolation, Lagrange’s and
Newton’s divided difference formula for unequal intervals; Numerical Differentiation, Numerical
Integration; Trapezoidal, Simpson’s 1/3 and 3/8 rule.
Text Books
1. B.S Grewal., Higher Engineering Mathematics, Khanna Publishers.
2. C Prasad., Engineering Mathematics for Engineers, Prasad Mudralaya.
3. H.K Das., Engineering Mathematics Vol-II, S. Chand.
Reference Books
1. E Kreyszig., Advanced Engineering Mathematics, Wiley Eastern.
2. N Piskunov, Differential & Integral Calculus, Moscow Peace Publishers.
4. N.P Bali., Engineering Mathematics-III, Laxmi Publications.

Semester IV/III
PHYSICS II
3 1 0 4
Objective: To understand modern physics like nanotechnology, cryogenics etc.
Course Contents
Relativistic Mechanics: Inertial and Non- inertial Frames; Michelson-Morley Experiment;
Postulates of Special Theory of Relativity; Galilean and Lorentz Transformation; Length Contraction
and Time Dilation; Addition of Velocities; Mass Energy Equivalence and Variation of Mass with
Velocity.

Modern Physics: Bragg’s Law; Compton Effect; Wave Particle Duality; De Broglie matter wave;
Davisson and Germer's Experiment; Phase and Group velocities; Uncertainty Principle and
application.

Quantum Mechanics II : Physical Interpretation of Wave Function and its Normalization;
Expectation Value; Schrodinger Equation in One Dimension; Solutions of Time-Independent
Schrodinger Equation for Free Particle; Particle in an Infinite Square Well; Potential Barrier and
Tunneling; Hydrogen atom (qualitative).

Superconductivity: Temperature dependence of resistivity; Meissner effect; Penetration depth;
Type I and Type II superconductors; Temperature dependence of critical filed; BCS theory of
superconductors; applications of superconductors.
Introduction to Nanomaterials: Basic principles of nanoscience and technology; creation and use
of buckyballs; properties and use of carbon nanotubes; applications of nanomaterials.

Vacuum Physics: Mean free path; rotary and diffusion pumps; Pirani and Penning Gauges.
Nuclear Physics: Nuclear Forces; Binding Energy; Liquid Drop Model; Fission; Nuclear Reactors;
Fusion and Energy Processes in Stars, Controlled Thermonuclear Reactions.
Text Books:
1. Robert Resmick, Introduction to Special Theory of Relativity, Wiley.
2. A. Beiser, Perspectives of Modern Physics, Mc.- Graw Hill.
3. R.Booker and E. Boysen, Nanotechnology, Wiley.
4. G. G. Haselden, Cryogenic Fundamentals, Academic Press.

Semester IV
ELECTRICAL MACHINES - II
3 0 0 3
Objective: To study the alternating current machines such as alternators, induction motors etc..
Course Contents
Three-Phase Induction Motor: Constructional details, Types of rotors; Principle of operation; Slip;
Equivalent circuit; Torque equations, Slip-torque characteristics; Losses and efficiency; Load test:
No load and blocked rotor tests; Circle diagram; Separation of no load losses; Crawling and
Cogging; Double cage rotors; Induction generator.

Starting and speed control of Three-Phase Induction Motor: Need for starting, Types of starters:
Stator resistance and reactance, rotor resistance, autotransformer and star-delta starters; Speed
control by changes of voltage, Frequency, Poles and rotor resistance, Cascaded connection.

Alternator: Constructional details, Types of rotors; EMF equation; Synchronous reactance;
Armature reaction; Voltage regulation: EMF, MMF and ZPF methods; Synchronizing and parallel
operation, synchronizing power, Change of excitation and mechanical input; Blondel’s theory,
Determination of Xd and Xq using slip test.

Synchronous Motor: Principle of operation; Torque equation; Starting methods; Operation on
infinite bus bars, V and inverted V curves; Power input and power developed equations, Power
/power angle relations; Hunting; Synchronous condenser; Applications.
UNIT V (Lectures 08)

Single Phase Induction Motors and Special Machines: Constructional details; Double revolving
field theory; Equivalent circuit; Starting methods, Types and applications; Working principles of
Shaded pole induction motor, Reluctance motor, Repulsion motor, Hysteresis motor, Stepper motor
and Universal motor.
Text Books:
1. D.P. Kothari and I.J. Nagrath, ‘Electric Machines’, Tata McGraw Hill Publishing Company Ltd,
2002.
2. Ashfaq Husain,”Electric Machines”, Dhanpat Rai.
3. K.Murugesh Kumar, ‘Induction & Synchronous Machines’, Vikas Publishing House Pvt. Ltd,
2000.
Reference Books:
1. A.E. Fitzgerald, Charles Kingsley, Stephen.D.Umans, ‘Electric Machinery’, Tata McGraw Hill
Publishing Company Ltd, 2003.
2. Dr. P.S. Bhimbra ,“AC machines”, Khanna Publishers

Semester IV
ELECTRICAL MEASUREMENTS & MEASURING INSTRUMENTS - II
3 0 0 3
Objective:
 To gain knowledge about measuring instruments such as potential and current transformers,
etc.
 To understand the working principles and constructions of digital instruments.
 To study the various display devices, recorders and telemetry systems.
Course Contents
Unit I (Lecture 08)
Transducers: Classification and selection of transducers; Measurement of mechanical variables:
Displacement, Force, Strain, Torque, Velocity and Acceleration; Measurement of temperature,
pressure, flow and level.
Unit II (Lectures08)
Potential Transformer (PT) & Current Transformer (CT): Phase Angle and Ratio errors;
Construction and design considerations; Testing of instrument transformers; Applications.
Unit III (Lectures08)

Display Devices and recorders: Display devices; Analogue recorders: Strip chart, u-v light and x-y
Recorders, their tracings and marking mechanisms.
Unit IV (Lectures08)
Digital Instruments and Measurements: Merits of digital instruments over analogue instruments;
Digital ohm meter; Digital multi-meter; Measurement of frequency, time interval, quality factor (Q),
Loss tangent (tan δ), Power and Energy.
Unit V (Lectures08)
Telemetry: Methods of Data transmission; General telemetry systems, DC and AC telemetry
systems; Modulation; Pulse telemetry systems; Digital telemetry.
Text Books:
1. E.W Golding., “Electrical Measurement & Measuring Instruments”, Pitman.
2. A.K Sawhney,” Electrical and Electronics Measurements and Instrumentation”, Dhanpat Rai.
Reference Books:
1. J.B Gupta., “A Course in Electronic and Electrical Measurements & Instrumentation”, S.K.
Kataria & Sons..
2. T.S Rathore, ,” Digital Measurement Techniques” Narosa Publishing House.

Semester IV
NETWORK ANALYSIS AND SYNTHESIS
3 1 0 4
Objective:
 To gain the knowledge about network theorems, network functions, filters etc.
Course Contents
Graph Theory: Graph of a Network, Definitions, Tree, Co-tree, Link, Basic loops and basic cut
sets, Incidence matrix, Cut set matrix, Tie set matrix, Duality, Loop and Node methods of analysis.

Network Theorems (Applications to AC Networks): Superposition theorem; Thevenin’s theorem;
Norton’s theorem; Maximum power transfer theorem; Reciprocity theorem; Millman’s theorem;
Compensation theorem; Tellegen’s theorem.

Network Functions: Concept of Complex frequency; Transform Impedances; Network functions of
one-port and two-port networks; Concept of poles and zeros; Properties of driving point and transfer
functions; Time response and stability from pole zero plot; Frequency response and Bode plots.

Two Port Networks: Characterization of LTI two-port networks Z, Y, ABCD and h parameters;
Reciprocity and Symmetry; Inter-relationships between the parameters; Inter-connections of two-
port networks; Image parameters and characteristic impedance; Ladder and Lattice networks; T & π
representation.

Network Synthesis: Positive real function, Definition and properties; Properties of LC, RC and RL
driving point functions; Synthesis of LC, RC and RL driving point immittance functions using Foster
and Cauer first and second forms.
Filters: Fundamentals of Passive and active filters; Low pass, High pass, Band pass, and Band
elimination filters.
Text Books:
1. M.E. Van Valkenburg “Network Analysis”, Prentice Hall of India
2. D.Roy Choudhary “Networks and Systems”, Wiley Eastern Ltd.
3. Donald E. Scott “An Introduction to Circuit analysis: A System Approach”, McGraw Hill Book
Company.
4. A.Chakrabarti “Circuit Theory”, Dhanpat Rai & Co.
Reference Books:
1. M.E. Van Valkenburg “An Introduction to Modern Network Synthesis”, Wiley Eastern Ltd.
2. W.H. Hayt & Jack E-Kemmerly “Engineering Circuit analysis”, Tata McGraw Hill.
3. Soni, Gupta “Circuit Analysis”, Dhanpat Rai & Sons.

Semester- IV
SIGNAL AND SYSTEMS
3 0 0 3
Objective:
 To understand the digital system and how the digital system has been developed.
 To study about the various logic families used to build up the digital system.
Course Contents
Signals: Definition, Types of signals and their representations: Continuous and discrete, Periodic and
non-periodic, Even and odd, Energy and power, Deterministic and random, one-dimensional and
multi-dimensional; Commonly used signals (continuous and discrete): Unit impulse, Unit step, Unit
ramp, Rectangular, Exponential, Sinusoidal; Operations on continuous and time signals (including
transformations of independent variables).

Laplace-Transform (LT) and Z-transform (ZT):
(i) One-sided LT of some common signals, Important theorems and properties of LT, Inverse LT,
solutions of differential equations using LT, Bilateral LT, Regions of convergence (ROC)
(ii) One sided and Bilateral Z-transforms, ZT of some common signals, ROC, Properties and
theorems, solution of difference equations using one-sided ZT, s- to z-plane mapping.

Fourier Transforms (FT):
(i) Definition, Conditions of existence of FT, Properties, Magnitude and phase spectra, Some
important FT theorems, Parseval’s theorem, Inverse FT, Relation between LT and FT
(ii) Discrete time Fourier transform (DTFT), Inverse DTFT, Convergence, Properties and theorems,
Comparison between continuous time FT and DTFT.

Systems: Classification; Linearity; Time-invariance and causality; Impulse response;
Characterization of linear time-invariant (LTI) systems; Unit sample response; Convolution
summation; Step response of discrete time systems; Stability.
Convolution integral; Co-relations; Signal energy and energy spectral density; Signal power and
power spectral density.

Time and frequency domain analysis of systems
Analysis of first order and second order systems: Continuous-time (CT) system analysis using LT;
System function algebra and block diagram representation; System bandwidth and rise time through
the analysis of a first order CT low pass filter.
Text Book:
1. P. Ramakrishna Rao, “Signal and Systems”, 2008 Edn., Tata MGH, New Delhi
Reference Books:
1. Chi-Tsong Chen, `Signals and Systems’, 3rd Edition, Oxford University Press, 2004
2. V. Oppenheim, A.S. Willsky and S. Hamid Nawab, “signals & System”, PEARSON Education,
Second Edition, 2003.

Semester IV
ELECTRONIC DEVICES AND CIRCUITS
3 0 0 3
Objective:
 To study& do the analysis about electronic devices like diodes, LED, JFET, MOSFET,
Amplifiers & Oscillators
Course Contents
Special Diodes: LED; Varactor; Photodiode; Schotkey barrier; Tunnel diodes and their constructions
and characteristics; Bipolar Junction Transistors: Transistor as an amplifier, Small signal equivalent
circuits (Hybrid-pi, Ebers moll), Graphical analysis, biasing the BJT for discrete-circuit design.

BJT & MOSFET: Basic Single Stage BJT amplifier configurations transistor as a switch-cut off
saturation, complete static characteristics, Internal capacitances and second order effects Field Effect
Transistor-Structure and physical operation of Enhancement and depletion types MOSFET, I/V
characteristics, MOSFET circuits at DC, MOSFET as an amplifier, biasing in MOS amplifier
circuits, Basic configurations of single stage MOS amplifier, Internal capacitances of MOSFETS.

Rectifier filter and regulators: Half wave rectifier, ripple factor, full wave rectifier, Harmonic
components in a rectifier circuit, Inductor filter, Capacitor filter, L-section filter, Pi-section filter,
Multiple L-section and Multiple Pi-section filter, simple circuit of a regulator using Zener diode;
Series and Shunt voltage regulators.

Amplifiers: Small signal low frequency transistor amplifier circuits: h-parameter representation of a
transistor, Analysis of single stage transistor amplifier using h-parameters: voltage gain, current gain,
Input impedance and Output impedance. Comparison of transistor configurations in terms of AI , Ri ,
Av , Ro, FEEDBACK AMPLIFIERS: Concept of feedback, Classification of feedback amplifiers,
General characteristics of negative feedback amplifiers.

Oscillators: Condition for oscillations; RC-phase shift oscillators with Transistor and FET; Hartley
and Colpitts oscillators; Wein bridge oscillator; Crystal oscillators; Frequency and amplitude
stability of oscillators.
Text Books:
1. J.Millman, C.C.Halkias, and Satyabratha Jit, ,Electronic Devices and Circuits, Tata McGraw
Hill, 2007.
2. R.L. Boylestad and Louis Nashelsky, Electronic Devices and Circuits, Pearson, Prentice Hall,
2006.
Reference Books:
1. T.F. Bogart Jr., J.S.Beasley and G.Rico, Electronic Devices and Circuits, Pearson Education,
2004.
2. S.G.Burns and P.R.Bond, Principles of Electronic Circuits, Galgotia Publications, 1998.
3. Millman and Grabel, Microelectronics, Tata McGraw Hill, 1988.
4. Dr. K. Lal Kishore, Electronic Devices and Circuits, B.S. Publications, 2005.
5. GS N Raju, Electronic Devices and Circuits, I K International Publishing House Pvt. Ltd. 2006

Semester IV
ELECTRICAL MACHINES - II (LAB)
0 0 3 1. 5
LIST OF EXPERIMENTS
1. To determine the voltage regulation of three-phase alternator by EMF, MMF and ZPF methods.
2. To perform the load test on three-phase alternator.
3. To determine voltage regulation of three-phase salient pole alternator by slip test.
4. To plot ‘V’ and Inverted’ V’ curves of Three Phase Synchronous Motor.
5. To perform the load test on three-phase squirrel cage induction motor.
6. To perform the load test on three-phase slip ring induction motor.
7. To perform No load and blocked rotor test on three-phase induction motor.
8. To perform No load and blocked rotor test on single-phase induction motor
9. To measure the efficiency of the three-phase induction motor using loss summation method.
10. To plot characteristics of three phase induction motor by V/f method
11. To perform load test on single-phase induction motor.
12. To determine the parameters of single phase induction motor using open circuit and short circuit
test.

Evaluation scheme:




Semester IV
NETWORK ANALYSIS & SYNTHESIS (LAB)
0 0 3 1. 5
LIST OF EXPERIMENTS
1. To verify the superposition theorem with DC and AC sources.

2. To verify the Thevenin’s theorem with DC and AC sources.
3. To verify the Norton’s theorem with DC and AC sources.
4. To verify the Maximum power transfer theorem with DC & AC sources.
5. To verify the Tellegen’s theorem for two networks of the same topology.
6. To verify the reciprocity theorem in a given network.
7. To plot the pole-zero diagram of the given network.
8. To determine the transient response for RL and RC circuits with step voltage input, under
critically damped and over damped cases.
9. To determine the frequency response for RLC (series& parallel) circuits with sinusoidal AC
input Signal.
10. To Study loading effect in the cascade connected Networks.
11. To determine the frequency response of a Twin – T notch filter.
12. To determine attenuation characteristics of a low pass/high pass active filters.

Evaluation scheme:




Semester IV
ELECTRONIC DEVICES & CIRCUITS (LAB)
0 0 3 1. 5
Note: Select any 10 out of the following list of experiments.
LIST OF EXPERIMENTS
1. To Study the lab equipments and components: CRO, Multimeter, Function Generator, Power
supply- Active, Passive Components & Bread Board.
2. To study the characteristics of Zener diode.
3. To study the characteristic of BJT.
4. To study the characteristic of FET.
5. To study the applications of Op-amp.
6. To study & plot the gain in dB Vs frequency of FET.
7. To study the design of single RC coupled amplifier.
8. To study & plot the gain Vs frequency of two stage amplifier.
9. To study the common collector configuration-emitter follower using Darlington pair.
10. To study the power amplifier and its gain characteristics.
11. To study & implement the transistor differential amplifier and plot its non ideal characteristics.

Evaluation scheme:




Semester V
CONTROL SYSTEMS
3 1 0 4
Objective:
 To learn about the open and closed loop control systems.
 To understand the time response analysis, frequency response analysis and study control
system component etc.
Course Contents
Control Systems: Open loop & closed control; Servomechanism; Physical examples; Transfer
functions: Block diagram algebra, and Signal flow graph, Mason’s gain formula; Reduction of
parameter variation and effects of disturbance by using negative feedback.

Time Response Analysis: Standard test signals; Time response of first and second order systems;
Time response specifications; Steady state errors and error constants; Design specifications of second
order systems; Derivative errors, Derivative output, Integral error and PID compensation; Design
specifications for higher order systems; Performance indices.

Control System Components: Constructional and working concept of AC Servomotor;
Synchronous and stepper motor; Stability and Algebraic Criteria, Concept of stability and necessary
conditions; Routh-Hurwitz criteria and limitations; Root Locus technique: Root Locus concepts,
Construction of Root Loci.

Frequency response Analysis: Frequency response, Correlation between time and frequency
responses; Polar and inverse polar plots; Bode plots; Stability in frequency domain: Nyquist stability
criterion, Assessment of relative stability, Gain margin and phase margin; Constant M&N circles.

Introduction to Design: The design problems and preliminary considerations of lead, Lag and Lead-
lag networks; Design of closed loop systems using compensation techniques in time and frequency
domains.
Review of state variable technique: Review of state variable technique, conversion of state variable
model to transfer function model and vice-versa; Diagonalization; Controllability and Observability
and their testing.
Text Book:
1. I.J. Nagrath & M. Gopal “Control System Engineering”, New age International.
2. K. Ogata “Modern Control Engineering”, Prentice Hall of India.
Reference Books:
1. Norman S. Nise “Control System Engineering”, Wiley Publishing Co.
2. M. Gopal “Control System; Principle and design”, Tata McGraw Hill.
3. M. Gopal “Modern Control system”, Tata McGraw Hill.

Semester V
POWER SYSTEM ANALYSIS - I
3 1 0 4
Objective:
 To study the power system elements and basics of power transmission & distribution systems.
Course Contents
Power System Components: Single line Diagram of Power system; Brief description of power
system Elements: Synchronous machine, Transformer, Transmission line, Bus bar, Circuit breaker
and isolator.
Supply System: Different kinds of supply system and their comparison, Choice of transmission
voltage.
Transmission Lines: Configurations; Types of conductors; Resistance of line; Skin and proximity
effects.

Over Head Transmission Lines: Calculation of inductance and capacitance of single-phase, three-
phase, single-circuit and double-circuit transmission lines; Representation and performance of short,
medium and long transmission lines; Ferranti effect; Surge impedance loading.

Corona and Interference: Phenomenon of corona: Corona formation, Calculation of potential
gradient, Corona loss, Factors affecting corona, Methods of reducing corona and interference;
Electrostatic and electromagnetic interference with communication lines.
Overhead line Insulators: Type of insulators and their applications; Potential distribution over a
string of insulators: Methods of equalizing the potential, String efficiency.

Mechanical Design of transmission line: Catenary curve; Calculation of sag & tension; Effects of
wind and ice loading; Sag template; Vibration dampers.
Insulated cables: Type of cables and their construction; Dielectric stress; Grading of cables;
Insulation resistance; Capacitance of single-phase and three-phase cables; Dielectric loss; Heating of
cables.

Neutral grounding: Necessity of neutral grounding: Various methods of neutral grounding,
Earthing transformer, grounding practices.
Distribution systems: Radial and Ring main system, Current and voltage calculation in distributors with
concentrated and distributed loads.
Text Books:
1. W. D. Stevenson, “Element of Power System Analysis”, McGraw Hill,
2. C. L. Wadhwa, “Electrical Power Systems” New age international Ltd. Third Edition
3. Asfaq Hussain, “'Power System”, CBS Publishers and Distributors,
4. B. R. Gupta, “Power System Analysis and Design” Third Edition, S. Chand & Co.
5. M. V. Deshpande, “Electrical Power System Design” Tata Mc Graw Hill.

Reference Books:
1. M. V. Deshpandey, “Elements of Power System Design”, Tata McGraw Hill,
2. Soni, Gupta & Bhatnagar, “A Course in Electrical Power”, Dhanpat Rai & Sons,
3. S. L. Uppal, “Electric Power”, Khanna Publishers
4. S.N.Singh, “Electric Power Generation, Transmission& distribution” PHI Learning

Semester V
POWER ELECTRONICS
3 0 0 3
Objective:
 To create an awareness of the general nature of power electronic equipments.
 To study the principles of operation of power electronic devices.
 To understand the applications of power electronic devices as converters, inverters etc.
Course Contents
Power Semiconductor Devices: Types of power semiconductor devices, their symbols and static
characteristics; Characteristics and specifications of switches; Types of power electronic Circuits;
BJT operation: Steady state and switch characteristics, Switching limits; Operation and steady state
characteristics of MOSFET and IGBT; Thyristor operation: V-I characteristics, Two transistor
model, Methods of turn-on; Operation of GTO, MCT and TRIAC.

Power Semiconductor Devices (Contd.): Protection of devices; Series and parallel operation of
thyristors; Commutation techniques of thyristor; DC-DC Converters: Principles of step-down
chopper, step down chopper with R-L load, Principle of step-up chopper, Operation with RL load,
classification of choppers.

Phase Controlled Converters: Single-phase half-wave controlled rectifier with resistive and
inductive loads, Effect of freewheeling diode; Single-phase fully-controlled and half-controlled
bridge converters.

AC Voltage Controllers: Principle of on-off and phase control single-phase ac voltage controller
with resistive and inductive loads; Three-phase ac voltage controllers (various configurations and
comparison); Single-phase transformer tap changer; Cyclo Converters: Basic principle of operation,
Single-phase to single-phase, Three-phase to single-phase and three-phase to three-phase cyclo
converters, output voltage equation.

Inverters: Single phase series resonant inverter; Single phase bridge inverters ; Three phase bridge
inverters; Voltage control of inverters ; Harmonics reduction techniques; Single phase and three
phase current source inverters.
Text Books
1. M.H.Rashid, “Power Electronics: Circuits, Devices & Applications”, Prentice Hall of India, Ltd.,
2004.
2. M.D. Singh & K.B. Khanchandani, “Power Electronics”, Tata McGraw Hill, 2005
Reference Books
1. M.S Jamil Asghar, “Power Electronics”, Prentice Hall of India Ltd., 2004
2. A Chakrabarti, “Fundamentals of Power Electronics & Drives”, Chanpat Rai & Co.
3. Babu K.Hari, “Power Electronics”, Switch Publications.

Semester V
MICROPROCESSOR & APPLICATIONS
3 0 0 3
Objective
 To study the evolution of microprocessors & how to do assembly language programming
with the help of interfacing.
Course Contents

Introduction to Microprocessor: 8085 Evolution of Microprocessor, Register Structure, ALU, Bus
Organization, Timing and Control, instruction set. Architecture of 16-bit Microprocessors:
Architecture of 8086; (Bus Interface Unit, Execution unit) Register Organization, Bus operation,
Memory segmentation.

Assembly Language Programming: Addressing Modes and instruction set of 8086, Arithmetic and
Logic instructions, Program Control Instructions (jumps, conditional jumps, subroutine call), Loop
and string instructions, Assembler Directives.

CPU Module: Signal Description of pins of 8086 and 8088, Clock generator, Address and Data bus
Demultiplexing, Buffering Memory Organization, Read and Write cycle Timings, Interrupt
Structures, Minimum Mode and Maximum Mode Operations.

Peripheral Interfacing: Programmed I/O, Interrupt Driven, I/O, DMA, Parallel I/O, (8255-PPI,
Parallel port), 8253/8254 programmable Timer/Counter Interfacing with ADC.

Peripheral Interfacing (Contd.): 8259 Programmable Interrupt controller, 8237 DMA controller
Concept of Advanced 32 bit Microprocessors: Pentium Processor.
Text Books:
1. Gaonkar Ramesh S., “Microprocessor Architecture, Programming, and Applications with the
8085”, Pen Ram International Publishing.
2. Ray, A.K. & Burchandi, K.M., “Advanced Microprocessors and Peripherals: Architecture
Programming and Interfacing”, Tata McGraw Hill.
3. Hall D.V, “Microprocessors Interfacing”, Tata McGraw Hill.
4. B.P. Singh & Renu Singh, “Microprocessors and Microcontrollers”, New Age International.
5. U.S.Shah, “Microprocessor”,Tech Max Publications
Reference Books:
1. Liu and Gibson G.A., “Microcomputer Systems: The 8086/8088 Family”, Prentice Hall (India).
2. Brey, Barry B., “INTEL microprocessors”, Prentice Hall (India).
3. Ram B., “Advanced Microprocessor & Interfacing”, Tata McGraw Hill.

Semester V
ENGINEERING AND MANAGERIAL ECONOMICS
Course Code: EHM503 L T P C
3 0 0 3
Objective:
 To understand the Scope of Economics, Demand Forecasting and Market Study.

Introduction: Meaning, Nature and Scope of Economics, Meaning of Science, Engineering and
Technology; Managerial Economics and its scope in engineering perspective.
Demand: Basic Concepts Demand Analysis, Law of Demand, Determinates of Demand; Elasticity
of Demand-Price; Income and cross Elasticity; Uses of concept of elasticity of demand in managerial
decision.

Forecasting: Demand forecasting Meaning, significance and methods of demand forecasting;
production function; Laws of returns to scale & Law of Diminishing returns scale.
Short and Long run Cost curves: fixed cost, variable cost, average cost, marginal cost, Opportunity
cost.

Market Study: Market Structure Perfect Competition; Imperfect competition: Monopolistic,
Oligopoly, Duopoly sorbent features of price determination and various market conditions.

Inflation: National Income; Inflation and Business Cycles Concept of N.I. and Measurement;
Meaning of Inflation; Type causes & prevention methods; Phases of business cycle.
Text Books:
1. Koutsoyiannis, A : Modern Microeconomics, ELBS.
2. Kakkar, D.N., Managerial Economics for Engineering, New Age International Publication.
Reference Books:
1. Dwivedi, D.N., Managerial Economics, Vikas Publishing.
2. Maheshwari, Y., Managerial Economics, Prentice Hall of India.

Semester V
CONTROL SYSTEMS (LAB)
0 0 3 1. 5
LIST OF EXPERIMENTS
1. To determine response of first order and second order systems for step input for various values
of constant ’K’ using linear simulator unit and compare theoretical and practical results.
2. To study P, PI and PID temperature controller and compare their performance.
3. To study and calibrate temperature using resistance temperature detector (RTD).
4. To design Lag compensator using Bode plot.
5. To design Lead compensator using Bode plot.
6. To design Lag, Lead and Lag-Lead compensators using Bode plot.
7. To study DC position control system.
8. To study synchro-transmitter and receiver and obtain output vs. input characteristics.
9. To determine speed-torque characteristics of an ac servomotor.
10. To study performance of a servo voltage stabilizer at various loads using load bank.
11. To study the behavior of separately excited dc motor in open loop and closed loop conditions at
various loads.
12. To simulate second order system using PID controller and explore transportation lag.

Evaluation scheme:
PRACTICAL PERFORMANCE & ATTENDANCE Experiment VIVA TOTAL

VIVA DURING THE SEMESTER (10 MARKS) (5 (10 INTERNAL
(25 MARKS) MARKS) MARKS) (50
EXPERIMENT FILE VIVA MARKS)
(10 MARKS) WORK (10
(05 MARKS)
MARKS)


(50 MARKS)

Semester V
POWER ELECTRONICS (LAB)
0 0 3 1. 5
LIST OF EXPERIMENTS
Note: A minimum of 10 experiments has to be performed out of which at least three should be
from software based experiments.
1. To study V-I characteristics of SCR and measure latching and holding currents.
2. To study UJT trigger circuit for half wave and full wave control.
3. To study single-phase half wave controlled rectifier with (i) Resistive load (ii) Inductive load with
and without freewheeling diode.
4. To study single phase (i) Fully controlled rectifier (ii) Half controlled bridge rectifier with resistive
and inductive loads.
5. To study three-phase (i) Fully controlled rectifier (ii) Half controlled bridge rectifier with resistive
and inductive loads.
6. To study single-phase AC voltage regulator with resistive and inductive loads.
7. To study single phase Cyclo-converter.
8. To study triggering of (i) IGBT (ii) MOSFET (iii) Power Transistor
9. To study operation of (i) IGBT (ii) MOSFET with Chopper circuit
10. To study MOSFET/IGBT based single-phase series-resonant inverter.
11. To study MOSFET/IGBT based single-phase bridge inverter.
SOFTWARE BASED EXPERIMENTS (PSPICE/MATLAB)

1. To simulate single-phase fully-controlled bridge rectifier using SCR and draw load voltage and
load current waveforms for inductive load/RL load.
2. To simulate single-phase fully-controlled bridge rectifier using GTO and draw load voltage and
3. To simulate single-phase fully-controlled bridge rectifier using IGBT and draw load voltage and
4. To simulate single-phase full-wave AC voltage controller SCR and draw load voltage and load
current waveforms for inductive load/RL load.
5. To simulate single-phase full-wave AC voltage controller MOSFET and draw load voltage and
6. To simulate step down dc chopper with L-C output filter for inductive load and determine steady-
state values and ripple contents of output voltage.

Evaluation scheme:


(10 MARKS) WORK (10
(05 MARKS)
MARKS)


(50 MARKS)

Semester V
MICROPROCESSOR & APPLICATIONS (LAB)
[EEC553 amended vide approval dt. Jan 16, 2018 of V.C]

0 0 3 1. 5
LIST OF EXPERIMENTS
1. Study of 8085 Microprocessor kit.

2. Write a program using 8085 and verify for addition of two 8-bit numbers.
3. Write a program using 8085 and verify for addition of two 8-bit numbers (with carry).
4. Write a program using 8085 and verify for 8-bit subtraction (display borrow).
5. Write a program using 8085 and verify for 16-bit subtraction (display borrow)
6. Write a program using 8085 for multiplication of two 8- bit numbers by successive addition
method.
7. Study of 8086 microprocessor kit.
8. Write a program using 8086 for multiplication of two 8- bit numbers.
9. Write a program using 8086 for multiplication of two 16- bit numbers.
10. Write a program using 8086 and verify for finding the smallest number from an array

Evaluation scheme:

(10 MARKS) WORK (10
(05 MARKS)
MARKS)


(50 MARKS)

Semester V
INDUSTRIAL TRAINING & PRESENTATION
0 0 0 2
Students will attend Industrial training of four weeks in any industry or reputed organization after the
IV semester examination in summer vacation. The evaluation of this training shall be included in the
V semester evaluation.
The student will be assigned a faculty guide who would be the supervisor of the student. The faculty
would be identified before the end of the IV semester and shall be the nodal officer for coordination
of the training.
Students will also be required to prepare an exhaustive technical report of the training undertaken
during the V semester which will be duly signed by the officer under whom training was taken in the
industry/ organization. The covering format shall be signed by the concerned office in-charge of the
training in the industry. The officer-in-charge of the trainee would also give his rating of the student
in the standard University format in a sealed envelope to the Director of the college.
The student at the end of the V semester will present his report about the training before a committee
constituted by the Director of the College which would be comprised of at least three members
comprising of the Department Coordinator, Class Coordinator and a nominee of the Director. The
students guide would be a special invitee to the presentation. The seminar session shall be an open
house session. The internal marks would be the average of the marks given by each member of the
committee separately in a sealed envelope to the Director.
The marks by the external examiner would be based on the report submitted by the student which
shall be evaluated by the external examiner and cross examination done of the student concerned.
Not more than three students would form a group for such industrial training/ project submission.
The marking shall be as follows.
Internal: 50 marks
By the Faculty Guide - 25 marks
By Committee appointed by the Director – 25 marks
External: 50 marks
By Officer-in-charge trainee in industry – 25 marks
By External examiner appointed by the University – 25 marks

Semester VI
ELECTRICAL DRIVES & CONTROLS
3 0 0 3
Objective:
 To study the applications of power electronics as a tool to control the electrical machines.
 To study the control of DC motor drives with single-phase and three-phase converters and
choppers.
 To control the AC motor drives with variable frequency converters.
Course Contents
Fundamentals of Electric Drives: Generalized block diagram; Choice of Electrical Drives;
Dynamics of Electrical Drives; Four-Quadrant Operation of Drive Systems; Nature and
Classification of Load Torques; Steady State and Transient Stability of Electrical Drive.

DC Motor Drives: DC Motors and their characteristics, starting; Electrical braking of dc motors;
Speed control, Control of DC motors by Single Phase Converters; Thyristor controlled Drives,
Single Phase semi- and fully-controlled converters connected to DC separately excited and DC series
Motors, Continuous and discontinuous current operation; Chopper Controlled DC drives, Speed
control of DC separately excited and DC series Motors, Industrial applications.
Microprocessor based control of DC Motor drives; PLL based Speed control of DC motor (Block
Diagrams only).

Induction Motor Drives: Three-phase induction motor analysis and Starting performance; Braking
of induction motor; Speed control, Stator voltage control, Control of Induction Motor by AC voltage
controllers, Waveforms, Speed torque characteristics, Variable frequency control.

Induction Motor Drives (Contd.): Rotor Resistance Control, Rotor side Static rotor resistance
control, Slip power recovery: Static Scherbius drive, Static Kramer Drive, Performance and speed
torque characteristics, Advantages, Applications, and Problems; Rotor voltage injection method;
Vector Control of induction motor.

Control of Synchronous Motors: Separate control & Self control of synchronous motors; Operation
of self controlled synchronous motors by VSI and CSI cyclo converters; Load commutated CSI fed
Synchronous Motor, Operation, Waveforms, Speed torque characteristics, Applications, Advantages
and Numerical Problems; Closed Loop control operation of synchronous motor drives (Block
Diagram Only).
Text Books
1. M.D. Singh & K.B. Khanchandani, “Power Electronics”, Tata McGraw Hill.
2. G.K. Dubey, “Fundamentals of Electric Drives”, Narosa Publications
3. M.H. Rashid, “Power Electronic Circuits, Devices and Applications”, Prentice Hall of India.
Reference Books
1. B.K. Bose, “Modern Power Electronics and AC Drives”, Prentice Hall of India.
2. Vedam Subramanyam, “Thyristor Control of Electric Drives”, Tata McGraw Hill.
3. S. K. Pillai, “A First course on Electrical Drives”, New Age International (P) Ltd. 2nd Edition.

Semester VI
POWER SYSTEM ANALYSIS - II
3 1 0 4
Objective:
 To provide basic knowledge to analyze the power system.
 To understand Symmetrical and unsymmetrical fault analysis.
 To study the load flow analysis and power system stability.
Course Contents
Representation of Power System Components: Synchronous machines; Transformers;
Transmission lines; One-line diagram: Impedance and reactance diagram, p.u. System.
Symmetrical components: Symmetrical Components: Unbalanced phasors, Power; Sequence
impedances and sequence networks.
Symmetrical fault analysis: Transient in R-L series circuit; Calculation of 3-phase short circuit
current and Reactance of synchronous machine; Internal voltage of loaded machines under transient
conditions.

Unsymmetrical faults: Analysis of L-G fault, L-L fault and L-L -G fault on an unloaded generators
and power system network with and without fault impedance; Formation of Z bus using singular
transformation and algorithm; Algorithm based methods for short circuit calculations.

Load Flows Analysis: Bus classifications; Nodal admittance matrix (Y bus); Development of load
flow equations: Load flow solution using Gauss-Siedel and Newton-Raphson methods,
approximation to N-R method; Line flow equations and fast decoupled method.

Power System Stability: Stability and Stability limit: Steady state stability study, Derivation of
swing equation, Transient stability studies by equal area criterion and step-by-step method, Dynamic
stability studies, Factors affecting steady state and transient stability, Methods of improvement of
stability.

Traveling Waves: Wave equation for uniform Transmission line; Velocity of propagation; Surge
impedance; Reflection and transmission of traveling waves under different line loadings; Bewlay’s
lattice diagram; Protection of equipments and line against traveling waves.
Text Books:
1. W.D. Stevenson, Jr. “Elements of Power System Analysis”, McGraw Hill.
2. C.L. Wadhwa, “Electrical Power System”, New Age International.
3. D. P. Kothari & Nagrath, “Modern Power System Analysis”, Tata McGraw Hill.
4. A. Chakrabarti, M.L. Soni, P.V. Gupta & U.S. Bhatnagar, “Power System Engineering”, Dhanpat
Rai & Co.

Semester VI
POWER GENERATION SYSTEMS
3 0 0 3
Objective:
 To learn the generation of electrical power from different types of power plants like thermal
nuclear and hydro power plants.
 To understand the concepts of generation of electrical power using non-conventional energy
resources.
 To learn the economics connected with power generation.
Course Contents
Economics of Generation: Load and load duration curve: Load, Demand and diversity factors, Plant
capacity and plant use factors; Choice of type of generation; Choice of size and number of units;
Cost of energy generated: Tariffs.

Hydro power plants: Layout and working; Types of turbines for high, medium and low head plants;
Advantages of hydro generation; Environmental issues; Hydro-Thermal scheduling problem.

Thermal power plants: Location, Layout and working of steam and diesel power plants; Types of
boilers and turbines and other accessories for steam and gas power plants; Environmental issues.

Nuclear power plants: Principles of nuclear power generation; Types of nuclear power plants and
their comparative study; Layout and working of nuclear power plants; Advantages and disadvantages
of nuclear energy; Reactor control; Reactor safety; Environmental issues.

Non-conventional power plants (Explanation of Power Generation through Block Diagrams):
Basic concepts; Principle of working and layout of MHD; Solar; Wind; Tidal; Biomass and
Geothermal Power Generating Systems.
Text Books
1. S.L. Uppal, “Electrical Power”, Khanna Publishers, New Delhi, 1997.
2. M.L. Soni, P.V. Gupta, U.S. Bhatnagar, “A Course in Electrical Power”, Dhanpat Rai & Sons,
Delhi.1992.A 155
Reference Books
1. I.J. Nagrath and D.P. Kothari , “Modern Power System Analysis”, Tata Mc Graw Hill.1989
2. C.L. Wadhwa., “Generation, Distribution and Utilization of Electric Energy”, New Age
International Ltd.1998.
3. M.V. Deshpande, “Elements of Electrical Power Station design”, Pitman, New.Delhi.1991.

Semester VI
ANALOG & DIGITAL COMMUNICATION
3 0 0 3
Objectives:
 To study about the modulation techniques for digital data transmission, digital
communication, spread spectrum and multiple access techniques.
Course Contents
Introduction: Overview of Communication system, Communication channels. Need for modulation,
Baseband and Pass band signals.

Amplitude Modulation: Double side band with Carrier (DSB-C), Double side band without Carrier,
Single Side Band Modulation, DSB-SC, DSB-C, SSB Modulators and Demodulators, Vestigial Side
Band (VSB), Quadrature Amplitude Modulator, Radio Transmitter and Receiver. Approximately
Compatible SSB systems.

Angle Modulation: Tone Modulated FM Signal, Arbitrary Modulated FM Signal, FM Modulators
and Demodulators, Stereophonic FM Broadcasting, Phase Modulation, relations with FM. Examples
Based on MATLAB.

Pulse Modulation & Digital Transmission of Analog Signals: Sampling Theorem and its
applications, Pulse Amplitude Modulation (PAM), Pulse Width Modulation, Pulse Position
Modulation. Their generation and Demodulation, Digital Representation of Analog Signals,
introduction to Pulse Code Modulation (PCM), Issues in digital transmission: Frequency Division
Multiplexing, Time Division Multiplexing, T1 Digital System, TDM Hierarchy.

Noise: Sources of Noise, Frequency domain representation of Noise, Superposition of Noise, Linear
filtering of Noise, Mathematical Representation of Noise. Analysis, Signal to Noise Ratio, Figure of
Merit, Noise in Amplitude Modulation and Frequency Modulation: Pre Emphasis, De Emphasis and
SNR Improvement, threshold effect, Phase Locked Loops Analog and Digital.
Text Book:
1. H. Taube, D L Schilling, Goutam Saha, “Principles of Communication”, 3rd Edition, Tata
McGraw-Hill Publishing Company Ltd.
Reference Books:
1. B.P. Lathi, “Modern Digital and Analog Communication Systems”, 3rd Edition, Oxford
University Press, 2009.
1. Simon Haykin, “Communication Systems”,4th Edition, Wiley India.
2. H. P. HSU & D. Mitra, “Analog and Digital Communications”, 2nd Edition, Tata McGraw-Hill
Publishing Company Ltd.

Semester VI
OBJECT ORIENTED PROGRAMMING SYSTEM
Course Code: ECS610 L T P C
3 0 0 3
Objective:
 To understand the information hiding, data abstraction, encapsulation, modularity,
polymorphism, and inheritance using object oriented programming.
Course Contents
OOP: History, OOP vs. Procedure oriented programming, Abstraction, Encapsulation, Inheritance
and Polymorphism.
Object & Classes: Links and Associations, Generalization, Aggregation, Abstract classes, Meta
data.
State model: Events and States, Operations and Methods, Nested state diagrams, Concurrency,
Relation of Object and Dynamic Models.
Functional Models: Data flow diagrams, Specifying Operations, Constraints, OMT Methodologies,
examples and case studies

C++ Basics: Structure of a program, Data types, Declaration of variables, Expressions, Operators,
Operator Precedence, Evaluation of expressions, Type conversions, Pointers, Arrays, Pointers and
Arrays, Strings, Structures.
Flow control statement: if, switch, while, for, do, break, continue, go to statements.
Functions: Scope of variables; Parameter passing; Default arguments; Inline functions; Recursive
functions; Pointers to functions.
Dynamic memory: Allocation and Reallocation operators: new and delete; Preprocessor directives.

C++ Classes and Data Abstraction: Definition, Structure, Objects, Scope, this pointer, Friends to a
class, Static class members, Constant member functions, Constructors and Destructors, Data
abstraction.
Polymorphism: Function overloading; Operator overloading; Generic programming: necessity of
templates, Function templates and class templates.
Inheritance: Class hierarchy, Types, Base and Derived classes, Access to the base class members,
Destructors, Virtual base class.

Virtual Functions and Polymorphism: Static and Dynamic bindings; Base and Derived class
Virtual function: Definition, Call mechanism, Pure virtual functions; Virtual destructors; Abstract
classes; Implications of polymorphic use of classes.

C++ I/O: I/O using C functions; Stream classes hierarchy; Stream I/O; File streams and String
streams; Overloading << and >> operators; Error handling during file operations; Formatted I/O.
Text Books:
1. James etal Rambaugh , “Object Oriented Design and Modeling”, PHI-1997
2. R. Lafore., “Object Oriented Programming in C+”, Galigotia Publications Pvt. Ltd.
3. E.Balagurusamy , “Object Oriented Programming with C++”, TMH, 2001
Reference Books:
1. S.B. Lippman and J. Lajoie, “C++ Primer”, Pearson Education
2. B, Stroutstrup, “The C++ Programming Language”, Pearson Education.

Semester-VI
Technical Writing
Course Code: EHM601 L T P C
2 0 2 3
Course Contents
Unit I
Forms of Technical Communication: Report writing, Definition and characteristics, Steps towards
report writing, Structure, style of Report writing, Types & forms of Reports, Presentation of Reports,
importance of Report writing.
Unit II
Technical Paper writing: Definition and purpose, essentials of a good technical paper/Article,
Scientific Article writing, Difference between Technical paper/Article and scientific article,
elements/steps in writing Technical paper & Scientific Article, Methods of writing technical paper &
Scientific article.
Unit III
Technical Proposal: Definition and meaning of Technical Proposal, Significance of Proposal,
Kinds, Types of proposal, Characteristics of a good Proposal, Structure, Parts, Format of Proposal,
Supplementary parts, Uses of Proposals.
Unit IV
Writing Skills: Reporting events, Writing News paper, Reports, Essentials of essay writing –writing
an essay of about 300 words on a given topic. Bio-Data Making, Writing of CV & Resumes,
Difference between CV and Resume, Writing Job application etc.
Unit V
Value-based Text Reading: R.K. Narayan- A Bookish Topic.
1. Francis Bacon- of studies.
2. CEM Joad – The Civilization of Today.
(Note: The two periods per week may be utilized in Language Lab covering the above
syllabus.)
Text Books:
1. Singh R.P., An Anthology of English Easy O.U.P. New Delhi.
2. Raman Meenakshi & Sharma Sangeeta, Technical Communication-Principles & Practice O.U.P.
New Delhi. 2007.
Reference Books:
1. Monippally Matthukutty M., Business Communication Strategies Tata- Mc Graw Hill
Publications Company, New Delhi.
2. Mohan K. & Sharma R.C., Business Correspondence of Report Writing,TMH, New Delhi.
NOTE:

Semester-VI
Language Lab III
[EHM 661 amended vide approval dt. Jan 11, 2017 of V.C]
Course Code: EHM661/EHM561 LT PC

0 0 53
Objective:
1. To prepare students for interview with GDs & Mock Interviews.

2. To make them ready for speaking on burning issue.
3. To enhance presentation skills.
4. To make students able to write report & email correctly.
5. To master the art of preparing CV & Résumé.
Lab Module:
1. Group Discussion on burning issues to prepare the students for interview

2. Mock interviews: Preparation, unfolding of personalities and expressing ideas effectively
3. Add –made shows
4. Presentations& practice of using skills covered in EHM501/BHM501
5. Quiz to increase students’ IQ Level/Quick Decision
6. Writing skills: Report Writing, Email Writing, Resume & CV, Covering Letter & Joining
Report.
Sample Topic for Group Discussion:
1. Swachh Bharat Abhiyan
2. Demonetization
3. Make in India
4. Climate Change
5. Smart phone has revolutionized education.
6. Any other Topic
Learning Outcomes:
1. Student will be able to overcome stage fright, nervousness and indecisiveness.
2. To speak in English on contemporary issues confidently and effectively in a group
discussion.
3. They will be able to communicate with a range of people in formal interview.
Evaluation Scheme
Internal Viva (Marks 50)
Group Discussion
S.N Leadership Skills Interpersonal Knowledge of Communication Confidence
Skills the Topic Skills
1
2
External Viva (Marks 50)
Mock Interviews
S.N Knowledge of frequently Confidence Body Technical Attitude
asked Questions Language & Knowledge
Voice
Modulation
1
2

Semester VI
ELECTRICAL DRIVES & CONTROLS (LAB)
0 0 3 1. 5
LIST OF EXPERIMENTS
1. To measure the magnetization and short-circuit characteristics of the synchronous machine.

2. To examine the external characteristics of the synchronous machine operating as a torque-
controlled machine.
3. To explore the field-weakening capabilities of the synchronous machine at higher speeds.
4. To measure the basic operating characteristics of PM synchronous machines for comparison with
those of the wound-field synchronous machine.
5. To explore the characteristics of PM synchronous machines under torque control, including
dynamic performance.
6. To demonstrate the basis for flux weakening in PM machine in comparison to field weakening.
7. To study the speed control of dc motor using dc chopper.
8. To study the speed control of dc motor using single-phase converter.
9. To study the speed control of dc motor using 3-phase converter.
10. To study the speed control of single-phase induction motor using ac regulator.
11. To study the speed control of three-phase induction motor using ac regulator
12. To study the static rotor resistance control method in three-phase induction motor

Evaluation scheme:

(10 MARKS) WORK (10
(05 MARKS)
MARKS)


(50 MARKS)

Semester VI
ANALOG & DIGITAL COMMUNICATION (LAB)
0 0 3 1. 5
LIST OF EXPERIMENTS

1. To study and construct a detector circuit for demodulation of AM signal and observe the diagonal
peak clipping effect.
2. To study amplitude demodulation by linear diode detector
3. To study Frequency modulation using voltage controlled oscillator.
4. To study the generation of DSB- SC signal using balanced modulator.
5. To study generation of side band signal.
6. To study and detect the FM signal using PLL.
7. To study and measure the noise figure using a noise generator.
8. To study the super heterodyne AM receiver and measure the sensitivity, selectivity and fidelity.
9. To study Pulse Width Modulation and Pulse Position Modulation.
10. To study sampling and reconstruction of Pulse Amplitude modulation system.

Evaluation scheme:

(10 MARKS) WORK (10
(05 MARKS)
MARKS)


(50 MARKS)

Semester VI
OBJECT ORIENTED PROGRAMMING SYSTEM (LAB)
0 0 3 1. 5
LIST OF EXPERIMENTS
1. To write a program illustrating overloading of various operators.

2. To write a program illustrating use of Friend.
3. To write a program illustrating use of Inline Function.
4. To write a program illustrating use of Static Member functions.
5. To write a program illustrating use of default arguments.
6. To write a program illustrating use of destructor and various types of constructor.
7. To write a program illustrating various forms of Inheritance.
8. To write a program illustrating use of virtual functions, virtual Base Class.
9. To write a program illustrating how exception handling is done.
10. To write programs implementing various kinds of sorting algorithms, Search algorithms & Graph
algorithms.

Evaluation scheme:

(10 MARKS) WORK (10
(05 MARKS)
MARKS)


(50 MARKS)

Semester VII
SWITCHGEAR & PROTECTION
3 0 0 3
Objective:
 To study about relays and circuit breakers for the protection of transmission lines etc.
Course Contents
Introduction to Protection System: Introduction to protection system and its elements: Functions of
protective relaying, Protective zones, Primary and backup protection, Desirable qualities of
protective relaying, Basic terminology; Relays: Electromagnetic, attracted armature type and
induction type relays, Thermal relay, Gas actuated relay, Design considerations of electromagnetic
relay.

Relay Applications and Characteristics: Amplitude and phase comparators: Over current relays,
Directional relays, Distance relays, Differential relays,
Static relays: Comparison with electromagnetic relays, Classification and their description, Over
current relays, Directional relay, Distance relays, Differential relay.

Protection of Transmission Line: Over current protection; Distance protection; Pilot wire
protection; Carrier current protection; Protection of bus; Auto reclosing.

Circuit Breakers: Properties of arc: Arc extinction theories, Restriking voltage transient, Current
chopping, Resistance switching, Capacitive current interruption, Short line interruption; Circuit
breaker ratings; Classification; Circuit Breakers: Operating modes, Selection of circuit breakers,
Constructional features and operation of Bulk Oil, Minimum Oil, Air Blast, SF6, Vacuum and D. C.
circuit breakers.

Apparatus Protection and testing of Circuit Breakers: Protection of transformers, generators and
motors; Testing of Circuit Breakers: Testing station and equipments, Testing procedure, Direct and
indirect testing.
Text Books
1. S. S Rao., “Switchgear and Protection”, Khanna Publishers.
2. B. Ravindranath. & M. Chander, “Power System Protection and Switchgear”, Wiley Eastern.
Reference Books
1. B.Ram & D. N. Vishwakarma, “Power System Protection and Switchgear”, Tata McGraw.
2. Y. G. Paithankar. & S. R. Bhide, “Fundamentals of Power System Protection”, Prentice Hall.

Semester VII
HIGH VOLTAGE ENGINEERING
3 1 0 4
Objective:
 To study breakdown mechanisms in gaseous, liquid and solid dielectrics etc.
 To study generation and measurement of high voltages.
Course Contents
Unit-I (Lecture 08)
Conduction and Breakdown of Gaseous Insulation Materials: Ionization process and current
growth; Townsend’s criterion for breakdown; Breakdown in electronegative gases; Time lags for
breakdown; Paschen’s law; Corona discharges; Breakdown in non-uniform fields; Selection of
insulating gases.
Unit-II (Lecture 08)

Conduction and Breakdown in Liquid and Solid Dielectrics: Breakdown mechanisms in liquid
dielectrics; Liquid dielectrics used in practice; Various processes of breakdown in solid dielectrics;
Solid dielectrics; Solid dielectrics used in practice.
Unit-III (Lecture 08)

Generation of High Voltages and Currents: Generation of high DC voltages: Multiplier circuits,
Van de Graff generator; High alternating voltage generation using cascade transformers; Production
of high frequency AC high voltages; Standard impulse wave shapes; Marx circuit; Generation of
switching surges; Impulse current generation; Tripping and control of impulse generators.
Unit-IV (Lecture 08)

Measurement of High Voltages and Currents: HVDC measurement techniques; Measurement of
power frequency A.C. voltages: Sphere gap measurement technique, Potential divider for impulse
voltage measurements; Measurement of high D.C, A.C and impulse currents; Use of CRO for
impulse voltage and current measurements.
Unit-V (Lecture 08)

High Voltage Testing: Testing: Insulators, Bushings, Cables, Isolators, Circuit Breakers and
Transformers; Surge diverter testing; Radio interference measurement; Use of I.S. for testing.
Text Books
1. C.L.Wadhwa, “High Voltage Engineering”, Wiley Eastern Limited, 1994
2. M.S.Naidu, and V. Kamaraju, “High Voltage Engineerin”, Tata McGraw Hill, 1982.
Reference Books
1. E. Kuffel. and M. Abdullah, “High Voltage Engineering”, Pergamon Press, 1970.
2. Dieter Kind, “An Introduction to High Voltage Experimental Techniques”, Wiley Eastern Limited,
1978.

Semester VII
FACTS TECHNOLOGY
[EEE703 Changes vide approval dt. Jan 11, 2017 of V.C]
Course Code: EEE703 LTPC

300 3
Objective:
 To study the Flexible AC Transmission Systems (FACTS) technology concepts and
their applications in power system transmission & distribution.
Course Contents
Unit-I (Lecture 08)
Introduction to FACTS: Electrical Transmission Network: Necessity, Power flow in AC system;
Relative importance of controllable parameter; Opportunities for FACTS: Possible benefits for
FACTS, Power Semiconductor Devices, Perspective on Power Devices, Types of High-Power
Devices, Principal High-Power Device Characteristics and Requirements: Voltage and Current
Ratings, Losses and Speed of Switching, Parameter Trade-Off of Devices; Power Device Material,
Diode (PN Junction)Transistor, MOSFET, Thyristor (without Turn-Off Capability), Gate Turn-Off
Thyristor (GTO), Turn-On and Turn-Off Process, MOS Turn-Off Thyristor (MTO), Insulated Gate
Bipolar Transistor (IGBT), MOS-Controlled Thyristor (MCT)
Unit-II (Lecture 08)

Static VAR Compensation: Need for compensation: Shunt & series compensation, Objectives of
shunt & series compensation, Configuration & operating characteristics; Thyristor controlled reactor
(TCR); Thyristor Switched Capacitor (TSC); Comparison of TCR & TSC.
Unit-III (Lecture 08)

Voltage-Sourced Converters: Basic Concept of Voltage-Sourced Converters, Single-Phase Full-
Wave Bridge Converter Operation, Single Phase-Leg Operation, Square-Wave Voltage Harmonics
for a Single-Phase Bridge, Three-Phase Full-Wave Bridge Converter, Converter Operation,
Fundamental and Harmonics for a Three-Phase Bridge Converter, Sequence of Valve Conduction
Process in Each Phase-Leg, Transformer Connections for 12-Pulse Operation, Three-Level Voltage-
Sourced Converter, Operation of Three-Level Converter, Fundamental and Harmonic Voltages for a
Three-Level Converter, Three-Level Converter with Parallel Legs, Pulse-Width Modulation (PWM)
Converter
Unit-IV (Lecture 08)

Series Compensation: Variable impedance type series compensation; Thyristor switched series
capacitor (TSSC); Thyristor controlled series capacitor (TCSC); Basic operating control schemes for
TSSC & TCSC.
Static Voltage Phase Angle Regulator: Objectives of voltage & phase angle regulators: approaches
to Thyristor, Controlled Voltage & Phase Angle Regulator.
Unit-V (Lecture 08)

Emerging FACTS Controller: STATCOM; Unified Power Flow Controller (UPFC); Interline
Power Flow Controller (IPFC); Basic operating principles of UPFC; Sub-synchronous resonance.
Text Books-
1. Narain G. Hingorani & Laszlo Gyugyi, “Understanding FACTS – Concepts & Technology offlexible AC
Transmission Systems”, Standard Publishers, New Delhi.
2. Mohan Mathur, R. & Rajiv K. Varma, “Thyristor Based FACTS Controller for Electrical Transmission
Systems”, Wiley Inter-science Publications.

Reference Books-
1. T.J.E Miller., “Reactive Power Control in Electric System”, John Wiley & Sons.
2. G.K Dubey., “Thyristorized Power Controller”, New Age international (P) Ltd., New Delhi.
3. Narain G. Hingorani, “Flexible AC Transmission”, IEEE Spectrum, April 1993, pp 40 – 45.
4. Narain G. Hingorani, “High Power Electronics in Flexible AC Transmission”, IEEE Power Engineering
Review.
5. Elinar V. Larsen, Juan J Sanchez – Gasca Joe H. Chow, “Concepts for design of FACTS controllers to
damp power swings”, IEEE Transactions on Power Systems, Vol. 10, No. 2.
*Latest editions of all the suggested books are recommended.

Semester VII
BIOMEDICAL INSTRUMENTATION
[EEC707 amended vide approval dt. August 08, 2017 of V.C]

2 0 0 2
Objective:
 To study the Electrodes and Transducers, Cardiovascular.
 To understand the Respiratory System Measurement, Ophthalmology Instruments etc.
Course Contents
Introduction of bio-medical instrumentation: Specifications of bio-medical instrumentation
system, Man- Instrumentation System Components, Problems encountered in measuring a living
system. Basics of Anatomy and Physiology of the body. Bioelectric potentials: Resting and action
potentials, propagation of action potential, The Physiological potentials – ECG, EEG, EMG, ERG,
EOG and Evoked responses. Electrodes and Transducers: Electrode theory, Bio potential Electrodes
– Surface electrodes, Needle electrodes, Microelectrodes. Biomedical Transducers.

Cardiovascular Measurements: Electrocardiography –ECG amplifiers, Electrodes and Leads, ECG
recorders –Single channel, three channel, Vector Cardiographs, ECG System for Stresses testing,
Holter recording, Blood pressure measurement, Heart sound measurement. Pacemakers and
Defibrillators. Patient Care & Monitoring: Elements of intensive care monitoring, displays,
diagnosis, Calibration & Reparability of patient monitoring equipment.

Respiratory system Measurements: Physiology of Respiratory system, Measurement of breathing
mechanism – Spiro meter. Respiratory Therapy equipments: Inhalators, Ventilators &Respirators,
Humidifiers, and Nebulizers & Aspirators. Nervous System Measurements: Physiology of nervous
system, Neuronal communication, Neuronal firing measurements.

Ophthalmology Instruments: Electroretinogram, Electro-oculogram, Ophthalmoscope, Tonometer
for eye pressure measurement. Diagnostic techniques: Ultrasonic diagnosis, Eco-cardiography,
Ecoencephalography,X-ray &Radio-isotope diagnosis and therapy, CAT-Scan, Emission
computerized tomography, MRI.

Bio-telemetry: The components of a Bio-telemetry system, Implantable units, Telemetry for ECG
measurements during exercise, for Emergency patient monitoring, Prosthetic Devices and Therapies:
Hearing Aids, Myoelectric Arm, Dia-thermy, Laser applications in medicine.
Text Books:
1. Khandpur R.S.- Biomedical Instrumentation- TMH
2. Venkata Ram,S.K.-Bio-Medical Electronics & Instrumentation (Revised)- Galgotia.
Reference Books:
1. Cromwell- Biomedical Instrumentation and Measurements- PHI
2. Webster, J.G. –Bio- Instrumentation ,Wiley (2004)
3. Ananthi, S. –A Text Book of Medical Instruments-2005-New Age International
4. Carr &Brown –Introduction to Biomedical Equipment Technology – Pearson
5. Pandey & Kumar-Biomedical Electronics and Instrumentation. – Kataria

Semester VII
Design and Installation of Solar Photovoltaic System
[EEC762 amended vide approval dt. August 08, 2017 of V.C]
Course Code: EEC762/BAS464 L T PC

0 2 2 2
Objective: To learn students-
 Basics of solar energy
 Installation, Maintenance and Service of solar power plant.
 Designing in AutoCAD
 Risk Management and to ensure safety and performance.
Course Outcomes: After completion, of course student should be able to-
 Explain the principles that underlie the ability of various natural phenomena to deliver solar
energy
 Outline the technologies that are used to harness the power of solar energy
 Discuss the positive and negative aspects of solar energy in relation to natural and human
aspects of the environment.
 Know all the design aspects of solar power plant.
Course Contents:
Unit-1 (T Hrs-4.5, P Hrs - 3.5)
Basics of PV Technology: What is Solar Energy, Solar Collectors, Photovoltaic Systems, History of
Photovoltaics, Photovoltaic Effect, Photovoltaic Cells, PV Modules and Arrays.
Solar PV technology overview: How does PV technology work, Other Types of Photovoltaic
Technology, Costs of Solar Photovoltaics, Modern Photovoltaics.
Fundamentals of Solar Components Solar PV System: Solar Radiation, Solar Cell Parameters and
Equivalent Circuit, Losses and Efficiency Limits, Crystalline Silicon Solar Cells, Thin-film solar cells,
PV System Design.
Site survey, assessment & feasibility study: PV Site Location, Assumptions and Input Data for
Analysis, Potential Rate Increases, Conclusions and Recommendations.
Unit-2 (T Hrs-4, P Hrs -5)

Assess the customer’s Solar PV requirement: pv cost considerations, permits and covenants, stand-
alone small solar electric systems, grid-connected small solar electric systems, estimating energy cost
savings for net-metered pv system.
Capacity or system sizing approach: Solar PV system sizing, determine power consumption demands,
Inverter sizing, Battery sizing, available area for installation of SPV.
Design of SPV Plants: Load estimation, Estimation of number of PV panels, Estimation of battery bank,
Cost estimation of the system.

Preparation of Bill of Materials (BoM): Mechanical or electrical components used to assemble or
integrate major components, Size of the Plant, Type of Roof, Module Make and Specs, Inverter Make
and Specs, Whether Remote Monitoring is separately required.
Installation, Maintenance and Service of SPV Plants: Modularity & scalability, Flexible location.
Civil and Mechanical parts of Solar PV System: Get Equipment Foundation constructed, Install
Mounting System, Install Photovoltaic modules, Install Battery Bank Stand and Inverter Stand.

Electrical components of Solar PV System: Install Array JB, cost effective wiring, Using MCCBs and
other essential components.

Advanced Solar Power plant Engineering: Photovoltaic Inverter Topologies for Grid Integration
Applications, Advanced Control Techniques for PV Maximum Power Point Tracking, Maximum Power
Point Tracking Methods for PV Systems, Photovoltaic Multiple Peaks Power Tracking Using Particle,
Swarm Optimization with Artificial Neural Network Algorithm
Intro – Google Sketchup, PV Syst, AutoCAD: Creation of a grid-connected project, Construction and
use of 3D shadings scenes, Meteorological data in PV-syst.

Solar project development phases and issues: Initiation phase, Definition phase, Design phase,
Development phase, Implementation phase, Follow-up phase.
Project planning and schedule of activities: Management activities, Project planning, Project
scheduling, Risk management, Risk identification, Risk analysis, Risk planning, Risk monitoring
Best practices in design & installation to ensure safety and performance: Work History, Financial
Transparency, Health and Safety, Insurance.

Each experiment (Min. 06 experiment) would be evaluated by external trainer or by faculty
concerned on the date of the experiment on a 4-point scale which would include the practical
conducted by the students and a Viva taken by external trainer or the faculty concerned. The marks
shall be entered on the index sheet of the practical file. Each experiment will be evaluated in 5 marks
as per given distribution.
Evaluation scheme:
S. No. Experiment Attendance Test result Viva Average in
(10 marks) (10 marks) (20 marks) (10 MARKS) 5 Marks
Experiment 1
Experiment 2
:
Experiment 10

The external evaluation would also be done by the external trainer or industrial expert or by faculty
based on the experiment conducted during the examination.

(50 MARKS)

Semester VII
SWITCHGEAR & PROTECTION (LAB)
0 0 3 1. 5
LIST OF EXPERIMENTS
1. To study the relaying and control circuits components.

2. To plot operating characteristics of inverse time over-current relay.
3. To plot operating characteristics of the differential relay.
4. To plot operating characteristics of the MHO distance relay.
5. To study the combined over-current & earth fault protection scheme of alternator.
6. To study the transformer protection using differential relay.
7. To plot the characteristic of Kit-Kat fuses and MCB.
8. To study the oil arc extinction phenomenon.
9. To demonstrate the microprocessor base protection for 3-phase induction motor.
10. To demonstrate the microprocessor base protection for 1-phase induction motor.
11. To demonstrate the microprocessor base protection for 3-phase alternator motor.
12. To study the different types of fuses.
Evaluation Scheme of Practical Examination:

Evaluation scheme:
PRACTICAL PERFORMANCE & VIVA DURING THE ON THE DAY OF EXAM

SEMESTER (35 MARKS) (15 MARKS) TOTAL
EXPERIMENT FILE WORK VIVA ATTENDANCE EXPERIMENT VIVA INTERNAL
(5 MARKS) (10 MARKS) (10 MARKS) (10 MARKS) (5 MARKS) (10 MARKS) (50 MARKS)



Semester VII
INDUSTRIAL TRAINING AND PRESENTATION
0 0 0 2.5
Students will have to undergo industrial training of six weeks in any industry or reputed organization
after the VI semester examination in summer. The evaluation of this training shall be included in the
VII semester evaluation.
The student will be assigned a faculty guide who would be the supervisor of the student. The faculty
would be identified before the end of the VI semester and shall be the nodal officer for coordination
of the training.
Students will prepare an exhaustive technical report of the training during the VII semester which
will be duly signed by the officer under whom training was undertaken in the industry/ organization.
The covering format shall be signed by the concerned office in-charge of the training in the industry.
The officer-in-charge of the trainee would also give his rating of the student in the standard
University format in a sealed envelope to the Director of the college.
The student at the end of the VII semester will present his report about the training before a
committee constituted by the Director of the College which would comprise of at least three
members comprising of the Department Coordinator, Class Coordinator and a nominee of the
Director. The students guide would be a special invitee to the presentation. The seminar session shall
be an open house session. The internal marks would be the average of the marks given by each
member of the committee separately in a sealed envelope to the Director.
The marks by the external examiner would be based on the report submitted by the student which
shall be evaluated by the external examiner and cross examination done of the student concerned.
Not more than three students would form a group for such industrial training/ project submission.
Internal: 50 marks
By the Faculty Guide – 25 marks.
By Committee appointed by the Director – 25 marks.
External: 50 marks
By Officer-in-charge trainee in industry – 25 marks.
By External examiner appointed by the University – 25 marks.

Semester VII
PROJECT WORK PHASE – I
(Synopsis, Literature Survey, and Presentation)
0 0 6 3
A group of students, not more than three, will be assigned a faculty guide who would be the
supervisor of the student. The faculty would be identified in the starting of the VII semester.
The group will carry out the literature search and collect required material for carrying out the
project.
The group will prepare a report not exceeding 15 pages at the end of semester.
The assessment of performance of students should be made at least twice in each semester i.e. VII
and VIII. In this semester the student shall present the progress of project live as also using
overheads project or power point presentation on LCD to the internal committee as also the external
examiner.
The evaluation committee shall consist of faculty members constituted by the college which would
comprise of at-least three members comprising of the Department Coordinator, Class Coordinator
and a nominee of the Director. The students guide would be a special invitee to the presentation. The
seminar session shall be an open house session. The internal marks would be the average of the
marks given by each member of the committee separately in a sealed envelope to the Director.
Internal: 100 marks

By the Faculty Guide - 50 marks
By Committee appointed by the Director – 50 marks

Semester VII
TELEMETRY & DATA TRANSMISSION
3 1 0 4
Objective:
 To familiarize the students with the various tools and tackles involved in effective use of
modulation techniques and data handling techniques in data transmission.
Course Contents
Unit I (Lecture 08)
Sampling Fundamentals: Sampling theorem and Sampling process; Convolution; Minimum
sampling rate; Aliasing Errors.

Digital Modulation Techniques: Review of PCM, DPCM; Methods of binary data transmission;
Data Formats; DM code converters; PSK; QPSK; FSK; Probability of error; Phase ambiguity
resolution and differential encoding; Error detection, Error correction, Error correction codes.

Data Handling System: Block schematic; Sensors; Signal conditioners; Multiplexing: High level
and Low level; ADC, Range and resolution; Word Format; Frame format; Frame synchronizer codes,
R. F. links, X24, RS 422, RS423, RS 232C interfaces; Multi terminal configuration; Multiplier &
Concentrator; Data Modems, Data transmission over telephone lines; Data Reception Systems; Bit
synchronizers; Frame synchronizers, Sub frame synchronizers; PLL; Display systems.

Remote Control: Communication based process control systems; Pipelines, Operational security
systems components, Pipeline control; Power system control; Programmable controllers for factory
automation.
Command: Tone command system, Tone digital command system, ON/OFF command and data
commands.

Aerospace Telemetry: Signal formation and conversion; Multiplexing techniques in tele-control;
Industrial tele-control installations; Reliability in tele-control installations.
Text Books
1. Patranabis, “Telemetry Principles”, Tata McGraw Hill.
2. Schweber, “Data Communication”, McGraw Hill.
Reference books
1. Vishwanathan, “Telecommunication Switching Systems”, Prentice Hall of India.
2. William C.Y. LEE, “Wireless and Cellular Telecommunications”, McGraw Hill.
3. Pandya Raj, “Mobile and Personal Communication Systems”, Prentice Hall of India.
4. Rappaport, “Wireless Communication”, Prentice Hall of India.
5. Alberto Leon Garcia, “Communication Network”, Tata McGraw Hill.
6. Andreas F. Molisch, “Wireless Communication”, Wiley.

Semester VII
DIGITAL SIGNAL PROCESSING
3 1 0 4
Objective:
 The objective behind this subject is to know about DFT, FIR filters their design.
Course Contents
Discrete Fourier Transform: Frequency Domain Sampling: The Discrete Fourier Transform
Frequency-Domain Sampling and Reconstruction of Discrete-Time Signals. The Discrete Fourier
Transform (DFT). The DFT as a linear Transformation. Relationship of the DFT to Other
Transforms. Properties of the DFT., Periodicity, Linearity, and Symmetry Properties. Multiplication
of two DFTs and Circular Convolution. Additional DFT Properties. Frequency analysis of signals
using the DFT.
Unit II (Lecture 08)

Efficient Computation of DFT Efficient Computation of the DFT: FFT Algorithms, Direct
Computation of the DFT. Radix-2 FFT algorithms. Efficient computation of the DFT of two real
sequences, computations, efficient computation of the DFT of 2NPoint real sequences, Gortezel
Algorithm, Chirp Z-transform algorithm.
Unit III (Lecture 08)

Basic IIR Filter Structures: Direct forms (I & II), cascade and parallel realizations. Signal flow
graph, Transposed structure, Basic FIR filter structures-. Direct form structure, frequency sampling
structure, Lattice structure, linear phase FIR structure. FIR structures.
Unit IV (Lecture 08)

FIR Filters: Symmetric and Anti-symmetric FIR Filters, Design of Linear-Phase FIR Filters Using
Windows, Design of Linear-Phase FIR Filters by the Frequency Sampling Method, Design of FIR,
and Equiripple filter design Differentiators. Design of Hilbert Transformers.
Unit V (Lecture 08)

Design of IIR Filters from Analog Filters: IIR Filter Design by Approximation of Derivatives, IIR
Filter Design by Impulse Invariance. IIR Filter Design by the Bilinear Transformation. The Matched-
z Transformation, Characteristics of Commonly Used Analog Filters. Application of above technique
to the design of Butterworth & Chebyshev filters.
Text Books:
1. Proakis.J.G.&Manolakis.D.G,Digital Signal Processing: Principles Algorithms and Applications,
Prentice Hall (India).
Reference Books:
1. Sanjit K. Mitra, Digital Signal Processing, TMH
2. Oppenheim A.V. & Schafer, Ronald W ,Digital Signal Processing,Pearson Education.
3. Rabiner, L.R. and Gold B., Theory and applications of DSP, PHI.
4. DeFatta, D.J., Lucas, J.G. & Hodgkiss, W.S.,Digital Signal Processing, John Wiley & Sons

Semester VII
TELEMETRY & DATA TRANSMISSION (LAB)
0 0 3 1. 5
List of Experiments:
1. To measure the temperature using RTD thermistor and amplify signal from thermistor to and
appropriate level suitable for tele transmission.
2. To study the S/H circuit, and reconstruction of the sampled signal.
3. To realize the PCM signal using ADC & reconstruction using DAC with 4 bit / 8 bit system.
4. To fabricate and test a PRBS generator.
5. To realize the data in different formats such as NRZ-L, NRZ-M &NRZ-S.
6. To study the clock recovery circuit from NRZ-L data using PLL.
7. To study the Manchester Coding & Decoding of NRZ-L data.
8. To study the Coding & Decoding of NRZ- L into URZ-L (unipolar return to Zero coding).
9. To study the ASK- modulation & detection.
10. To study the FSK- modulation & detection.
11. To study the PSK- modulation & detection.
12. To study the error introduction, error detection & correction using Hamming code.
13. To study the amplitude modulation & detection of signal obtained from transmission.

Evaluation scheme:




Semester VII
DIGITAL SIGNAL PROCESSING (LAB)
0 0 3 1. 5
LIST OF EXPERIMENTS
1. To study the sampling & waveform generation.
2. To study the technique of Quantization.
3. To study the PCM Encoding.
4. To study the Delta Modulation.
5. To study the digital modulation schemes (ASK, PSK&FSK).
6. To study the error correcting codes
7. To study & compute DFT.
8. To study & analyze fast Fourier transform (FFT).
9. To study & implement FIR Filter.
10. To study & implement IIR Filter.
11. To study & implement DSP processor.
12. To study & perform computational experiments with digital filters
Note: The entire practical’s to be performed on MATLAB DSP tool kit

Evaluation scheme:




Semester VIII
LINEAR INTEGRATED CIRCUITS & APPLICATIONS

3 0 0 3
Objective
 To understand the Technology involved in IC Fabrication.
 To study the characteristics of Operational Amplifiers.
 To study the 555 Timer IC and its application.
Course Contents
Unit I (Lecture 08)
IC FABRICATION: IC classification; Fundamental of monolithic IC technology; Masking and
Etching; Diffusion of impurities; Realization of monolithic ICs and packaging; Fabrication of diodes,
Capacitors, Resistors.

CHARACTERISTICS OF OP-AMP: Ideal OP-AMP characteristics: DC characteristics, AC
characteristics; Offset voltage and current; Voltage series feedback and Shunt feedback amplifiers;
Differential amplifier; Frequency response of OP-AMP; Basic applications of op-amp: Summer,
Differentiator and Integrator.

APPLICATIONS OF OPAMP: First and Second order active filters: LPF, HPF; V/I & I/V
converters; Comparators; Multivibrator; Peak detectors, S/H circuits, D/A converters: R-2R ladder
and weighted resistor types; A/D converters: Dual slopes, Successive approximation.

SPECIAL ICs: 555 Timer circuit; Functional block; Characteristics & applications; 565-phase lock
loop circuit functioning and applications, Analog multiplier ICs.
Unit V (Lecture 08)

APPLICATION ICs: IC voltage regulators: 78XX, 79XX Series, LM317, 723 regulators, SMPS,
LM 380 power amplifier.
Text Books
1. Ramakant A.Gayakward, “Op-amps and Linear Integrated Circuits”, IV edition, Pearson
Education, 2003 / PHI. (2000).
2. D.Roy Choudhary, Sheil B.Jani, “Linear Integrated Circuits”, II edition, New Age, 2003.
Reference Books
1. Jacob Millman, Christos C.Halkias, “Integrated Electronics - Analog and Digital circuits system”,
Tata McGraw Hill, 2003.
2. Robert F.Coughlin, Fredrick F.Driscoll, “Op-amp and Linear ICs”, Pearson Education, 4th
edition, 2002 / PHI.
3. David A.Bell, “Op-amp & Linear ICs”, Prentice Hall of India, 2nd edition, 1997.

Semester VIII
ANTENNA & MICROWAVE ENGINEERING

3 0 0 3
Objectives: To study working and types of antennas and wave guides.
Course Contents
Antenna Principles: Potential Functions & Electromagnetic Field, Current Elements, Radiation
from Monopole & Wave Dipole Network Theorems, Directional Properties of Dipole Antenna,
Antenna gain, effective area, antenna Terminal impedance, antenna as an opened out Transmission
Line, Practical Antennas and Methods of Excitation, Transmission Loss between Antennas, Antenna
Temperature and Signal to Noise Ratio.

Antennas Arrays: Two Element Array, Horizontal Patterns in Broadcast Arrays, Linear Arrays,
Binomial Array Tchebyscheyf Distribution.

Wave Propagation: Modes of Propagation, Plane Earth Reflection, Space wave and Surface Wave,
Elevated Dipole Antennas above a Plane Earth, Wave Tilt of the Surface Wave, Spherical Earth
Propagation. Tropospheric Wave. Ionosphere Propagation, Sky Wave Transmission Calculations,
Effects of the Earth’s Magnetic Field, Wave Propagation in the Ionosphere, Virtual Height,
MUF/LUF, Skip Distance, Duct Propagation, Space wave.

Wave Guides: Rectangular, Circular, Transmission Line Analogy for Wave guides, Dielectric Slab
Wave guide.

Microwave Generation: Conventional Vacuum Tubes, Klystrons; Reflex & Multi cavity, TWT,
Magnetrons, FWCFA, BWCFA & BWO, IMPATT, Parametric Devices, Gunn, InP, CdTe Diodes.
Text Books:
1. C Jordan Edwards. and G Balmain Keith “Electromagnetic Waves and Radiating Systems”,
Prentice Hall of India.
2. S.Y.Liao, “Microwave Devices & Circuits”, , Prentice Hall of India Third Edition.
Reference Books:
1. D Kraus, John. & Mashefka, Ronald J. “Antennas: For All Applications”, Tata McGraw Hill,
2. K.D Prasad,. “Antennas and Wave Propagation”, , Khanna Publications
3. R Collin, “Antennas and Radio wave Propagation”, Tata Mc Graw-Hill
4. H Hayt Jr. William. “Engineering Electromagnetic”, Tata McGraw-Hill
5. Das, Annaparna & K Das, Sisir “Microwave Engineering”, Tata McGraw Hill.
6. Das, Annaparna & K Das, Sisir “Microwave Semiconductor Devices”, Prentice Hall of
India.

Semester VIII
LINEAR INTEGRATED CIRCUITS & APPLICATIONS (LAB)
0 0 3 1. 5
LIST OF EXPERIMENTS
Note: Minimum ten experiments should be performed.
1. To study the characteristics of Operational Amplifier (IC741).

2. To generate the waveform using Operational Amplifier (IC741).
3. To study the Operational Amplifier (IC741) as comparator.
4. To study the Operational Amplifier (IC741) as differentiator.
5. To study the Operational Amplifier (IC741) as integrator.
6. To Implement the S/H circuit using Operational Amplifier (IC741).
7. To study the DAC (ladder type) and ADC (successive approximation type).
8. To study applications of Timer IC555 as Multivibrator (monostable and bistable).
9. To study LM 380 as power amplifier.
10. To implement the S/H circuit using Operational Amplifier (IC741).
11. To implement PLL using IC555.
12. To study the voltage Regulator-IC 723.

Evaluation scheme:



Semester VIII
ANTENNA & MICROWAVE ENGINEERING (LAB)
0 0 3 1. 5
LIST OF EXPERIMENTS
1. To plot and analyses the radiation pattern of Dipole antenna.

2. To plot and analyses the radiation pattern of Half Wave Dipole antenna.
3. To plot and analyses the radiation pattern of Yagi Antenna
4. To plot and analyses the radiation pattern of Log Antenna
5. To plot and analyses the radiation pattern of Crossed Dipole, Log Periodic Antenna.
6. To study the measurement of a VSWR system.
7. To study the measurement of unknown impedance.
8. To design & test the RF Tuned Amplifier.
9. To design & test the RF Oscillator.
10. To design & test the IF Amplifier.
11. To design & test the RF mixture.
12. To design & test the RF filters. (LP. HP. BP. Notch filter).

Evaluation scheme:



Semester VIII
PROJECT WORK PHASE-II
(Report, Analysis, Implementation/Simulation, and Presentation)
0 0 18 9
Students should devote themselves to prepare something tangible, which could be a working model
of their thoughts based on their subject of choice.
The project shall be finalized by the students based on the VII semester project work report and shall
be completed and submitted at least one month before the last teaching day of the VIII semester, date
of which shall be notified in the academic calendar.
The assessment of performance of students should be made at least twice in each semester i.e. VII
and VIII. In this semester student shall present the final project live as also using overheads project
or power point presentation on LCD to the internal committee as also the external examiner.
The evaluation committee shall consist of faculty members constituted by the college which would
comprise of at-least three members comprising of the Department Coordinator, Class Coordinator
and a nominee of the Director. The students guide would be a special invitee to the presentation. The
seminar session shall be an open house session. The internal marks would be the average of the
marks given by each member of the committee separately in a sealed envelope to the Director.
Internal: 50 marks
By the Faculty Guide - 25 marks.
By Committee appointed by the Director – 25 marks.
External: 50 marks
By External examiner appointed by the University – 50 marks.
Semester VIII
ELECTRIC POWER SYSTEM OPERATION
3 0 0 3
Objective:
 To study the operation of electrical power systems and their control.
Course Contents
Unit I (Lecture 08)
Introduction: Structure of power systems; Power system control center and real time computer
control; SCADA system; Level decomposition in power system; Power system security; Various
operational stages of power system; Power system voltage stability.

Economic Operation: Concept and problems of unit commitment; Input-output characteristics of
thermal and hydroplanes, System constraints; Optimal operation of thermal units without and with
transmission losses: Penalty factor, Incremental transmission loss, Transmission loss formula
(without derivation); Hydrothermal scheduling: Long and short terms; Concept of optimal power
flow.

Load Frequency Control: Concept of load frequency control: Load frequency control of single area
system; Turbine speed governing system and modeling; Block diagram representation of single area
system: Steady state analysis, Dynamic response, Control area concept, P-I control; Load frequency
control and Economic dispatch control: Load frequency control of two area system, Tie line power
modeling, Block diagram representation of two area system, Static and dynamic response.

Automatic Voltage Control: Schematic diagram and block diagram representation, different types
of Excitation systems & their control.
Voltage and Reactive Power control: Voltage control: Methods of voltage control, Control by tap
changing transformer; Compensation: Shunt compensation, Series compensation, Phase angle
compensation.
Unit V (Lecture 08)

Computer Control of Power System: Energy control center; Various levels: National, Regional and
State level; SCADA system: Computer configuration, Monitoring, Data acquisition and controls;
EMS System-System operating states: Normal, Alert, Emergency, In-extremis, Restorative-Control
strategies.
Text Books:
1. D.P. Kothari & I.J. Nagrath, “Modern Power System Analysis”, Tata Mc Graw Hill.
2. P.S.R., Murty, “Operation and control in Power Systems”, B.S. Publications.
3. N. G. Hingorani & L. Gyugyi , “Understanding Facts Concepts and Technology of Flexible AC
Transmission Systems”, Wiley India.
Reference Books:
1. O.I Elgerd. “Electric Energy System Theory”, Tata McGraw Hill.
2. P. Kundur, “Power System Stability and Control”, McGraw Hill.
3. M.H. Rashid “Power Electronics: Circuits, Devices and Applications”, Prentice Hall of India.
4. A. J. Wood & B.F. Wollenburg, “Power Generation, Operation and Control”, John Wiley & Sons
Semester VIII
ARTIFICIAL INTELLIGENCE
3 0 0 3
Objective:
 To know about networking system, control information & algorithms.
Course Contents
Unit I (Lecture 08)
Artificial Intelligence: Issues, Techniques, Problems, Importance and areas of AI; Problem solving
state space search; DFS; BFS Production: System, Problem characteristics; Heuristic Search
Techniques; Generate and Test; Hill Climbing; Best First Search; Problem reduction; Constraint
satisfaction; Crypt arithmetic and problems.

Knowledge representation: Mapping; Approaches; Issues; Representing simple facts in logic;
Representing instance and relationships; Resolution and natural deduction; Representing knowledge
using rules; Procedural vs. Declarative knowledge; Logic programming; Forward v/s Backward
chaining; Matching & control knowledge.

AI programming language: Prolog: Objects, Relationships, Facts, Rules, Variables, Syntax and
Data Structures; Representing objects & Relationships by using “trees” and “lists”; Use of cut; I/O of
characters and structures; Symbolic reasoning under uncertainty; Monotonic Reasoning: Logics for
Non-Monotonic reasoning; Implementation issues; Implementation: DFS & BFS.

Slot and Filler Structures: Semantic nets; Frames; Conceptual dependency; Scripts; CYC Natural
languages and NLP; Syntactic processing parsing techniques; Semantic analysis case grammar;
augmented transition net; Discourse & pragmatic processing; Translation.
Unit V (Lecture 08)

Expert System: Definition and Characteristics; Representing and using Domain Knowledge; Expert
system shells Knowledge Engineering; Knowledge acquisition; Expert system life cycle & Expert
system tools; MYCIN & DENDRAL.
Text Books
1. E Rich,. and K Knight, “Artificial Intelligence”, Tata McGraw Hill.
Reference Books
1. W.F Cloksin, C.S Mellish, “Programming In Prolog”, Narosa Publishing House.
2. V.S.Janakiraman, K Sarukesi, “Foundation of Artificial Intelligence & Expert System”,
Macmillan
Semester VIII
PLC PROGRAMMING LAB
[EEC 857 amended vide approval dt. Jan 11, 2017 of V.C]
Course Code: EEC-857

L T P C
0 0 5 3
Objective: To understand and learn how system and process are automated in industry and how
automated monitoring and control function are performed.
List of Experiments-
1. Introduction to PLC: Introduction to PLC hardware and role in automation ,Architectural Evolution
of PLC, Introduction to the field devices attached to PLC,PLC Fundamentals - (Block diagram of
PLC's),Detail information about PLC components ,Power supply, CPU, I/Os, Communication bus,
Various ranges available in PLC’s, Types of Inputs & outputs modules , Source Sink Concepts for
connecting external devices, Electrical Signal levels used in industrial application, Wiring of the I/O
devices to PLCs, Concept of flags and Scan cycle execution, Selection of control system to suit the
local requirement, Setting up PLCs / Connecting CPU, I/O modules, Rack, Backplane and
Communication bus.
2. PLC Programming software: Introduction to PLC programming software, Advanced Feature of PLC
programming software, Starting the programming terminal and configuring the PLCs, Addressing
concepts in various PLCs, PLC programming types– Ladder Diagram (LD), Instruction List(IL),
Functional Block Diagram (FBD) Sequential Function Charts (SFC), Structured Text (ST),
Information on the PLC & its Software and Language, Upload / Download and Monitoring of program
3. PLC Programming: Starting the programming terminal, Creating & Modifying an RSLogix new
project, Introduction to Bit Byte and Word Concept, Programming instructions arithmetic and logical ,
Load /and /or/out / and Read / Write , Compare / Add / Sub /And /Or – Blocks, Leading edge / trailing
edge instructions, MOVE block application, Programming instructions arithmetic and logical ,Timer
and Counter Blocks programming, Comments in the PLC programs, Handling Analog I/Ps, Advanced
Programmers ,Conversion, Jump Shift instructions, Accumulator functions, Extended mathematical
functions, Indirect Addressing, PLC Project Development, Creating various Tasks & Organizing Data,
Programming Program Control Instructions, Upload, Download and Monitoring of program.
4. Operation, Maintenance and Troubleshooting: Managing RSLogix 500 Project Files, Back up of
the programs and reloading, Interpreting Project Organization & Execution, Documenting &
Searching for Project Components, Online operations, Monitoring Arrays & Tags of User-Defined
Data , Forcing of the I/O’s and Toggling Bits, Editing Ladder Logic Online, Identifying the status of
PLC and communication bus, Troubleshooting Controller, I/O Modules, PS Problems, CPU, I/O
module replacements, Fault detection and error handling,Online editing of the program, Forcing the
I/Os, Backup and Restoring programs, Cold, Warm, and Hot Restarts in Siemens PLCs
,Troubleshooting and fault diagnostics of PLC, Fault Detection using Simantic S 7 software ,Hardware
fault detection,Replacing CPU, Digital or Analog Modules, battery, Power Supply, Clearing the faults.
5. SCADA: Introduction and Applications of SCADA Technology, Architectural evolution of SCADA,
Introduction to SCADA software, Features supported by RS View Software, Start up Option and
application management, Licensing – No. of I/Os, Screens, Creating a new application, Creating tags
and address assignments, Creating & Editing graphic display with animation, Data Entry / Start Stop
command, Analog entry, Sizing, Movement, Blinking, Visibility, Filling, Create navigational tools
between various pages for user, Trends - Configuring & Accessing Real-time and Historical data.
Guide to the alarm pag, Alarm Classes, Configuring, Retrieving and Acknowledgement, Logic writing
in SCADA software.
Learning Outcomes:
 To understand Industrial Automation Environment

 How PLC can be used to Automate any Process
 How a real life Automation need is converted to a problem and solved by PLC.?
 Programming in PLC by using different language learns to automate any process in industry.
Text Books: Garry Dunning "Introduction to Programmable Logic Controller" Thomson 3rd Edition.
*Latest editions of all the suggested books are recommended.

Each experiment (Min. 10 experiment) would be evaluated by external trainer or by faculty
concerned on the date of the experiment on a 4-point scale which would include the practical
conducted by the students and a Viva taken by external trainer or the faculty concerned. The marks
shall be entered on the index sheet of the practical file. Each experiment will be evaluating in 5
marks as per given distribution.
Evaluation scheme:
S. No. Experiment Attendance Test result Viva Average in
(10 marks) (10 marks) (20 marks) (10 MARKS) 5 Marks
Experiment 1
Experiment 2
:
Experiment 10

The external evaluation would also be done by the external trainer or industrial expert or by faculty
based on the experiment conducted during the examination.

(50 MARKS)
Note: External exam will be conducted at the end of the training.
Semester VIII
POWER SYSTEM SIMULATION (LAB)
0 0 3 1. 5
LIST OF EXPERIMENTS (MATLAB Based Experiments)
1. To study the various power system simulation commands.

2. To perform load power flow analysis by NR method.
3. To perform load power flow analysis by fast decoupled NR method.
4. To perform load power flow analysis by Gauss elimination method.
5. To study the symmetrical fault analysis.
6. To study the L-L fault analysis.
7. To study the L-G fault analysis.
8. To control the voltage level in a power system by automatic voltage regulator.
9. To control the voltage level in a power system by tape changing transformer.
10. To control the voltage level in a power system by tab changing transformer.
11. To study the load frequency control in single area system.
12. To study the load frequency control in two area system.

Evaluation scheme:



Semester VIII
ARTIFICIAL INTELLIGENCE (LAB)
0 0 3 1. 5
LIST OF EXPERIMENTS
1. To Write a LISP Program to solve the water-jug problem using heuristic function.
2. To create a compound objects using Turbo Prolog.
3. To Write a Prolog Program to show the advantage and disadvantage of green and red cuts.
4. To write a prolog program to use of Best-First search applied to the eight puzzle problem.
5. To implement the problem solving strategies: Forward Chaining, Backward Chaining, and
Problem Reduction.
6. To Write a Lisp Program to implement the Steepest-Ascent Hill Climbing.
7. To Write a Prolog Program to implement counter propagation network.
8. To write program to solve Travelling Salesman problem.
9. To write program to solve 8-Queen problem.
10. To write program to solve Missionary Cannibal problem.

Evaluation scheme:




Eee. 14 15 PDF

Uploaded by

Copyright:

Available Formats

Eee. 14 15 PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Eee. 14 15 PDF

Uploaded by

Copyright:

Available Formats

Study & Evaluation Scheme

TEERTHANKER MAHAVEER UNIVERSITY

B.Tech (EEE) Syllabus Applicable w.e.f. Academic Session 2014-15 Page 1

Study & Evaluation Scheme

S. Course Periods Evaluation Scheme

S. Course Periods Evaluation Scheme

B.Tech (EEE) Syllabus Applicable w.e.f. Academic Session 2014-15 Page 3

Sr. Course Periods Evaluation Scheme

2 EEE301 Circuit Theory 3 0 - 3 30 70 100

4 EEE303 Electrical Machines – I 3 - - 3 30 70 100

9 EEE355 Electrical Machines - I (Lab) - - 3 1.5 50 50 100

1 EME152/252 Engineering Drawing Lab - - 3 0 50 50 100

Sr. Course Periods Evaluation Scheme

B.Tech (EEE) Syllabus Applicable w.e.f. Academic Session 2014-15 Page 4

Sr. Periods Evaluation Scheme

Periods Evaluation Scheme

B.Tech (EEE) Syllabus Applicable w.e.f. Academic Session 2014-15 Page 5

Sr. Course Periods Credit Evaluation Scheme

S. Periods Credit Evaluation Scheme

B.Tech (EEE) Syllabus Applicable w.e.f. Academic Session 2014-15 Page 6

Unit II (Lectures 08)

Unit III (Lectures 08)

Unit IV (Lectures 08)

Unit V (Lectures 08)

B.Tech (EEE) Syllabus Applicable w.e.f. Academic Session 2014-15 Page 7

Course Code: EAS102/EAS 202 L T P C

Unit II (Lectures 08)

Unit III (Lectures 08)

Unit IV (Lectures 08)

Unit V (Lectures 08)

B.Tech (EEE) Syllabus Applicable w.e.f. Academic Session 2014-15 Page 8

Unit II (Lectures 08)

Unit III (Lectures 08)

Unit IV (Lectures 08)

Unit V (Lectures 08)

B.Tech (EEE) Syllabus Applicable w.e.f. Academic Session 2014-15 Page 9

Course Code: EME101/EME201 L T P C

Unit II (Lectures 08)

Unit III (Lectures 08)

Unit IV (Lectures 08)

Unit V (Lectures 08)

B.Tech (EEE) Syllabus Applicable w.e.f. Academic Session 2014-15 Page 10

Course Code: EME102/EME202 L T P C

Unit I (Lectures 08)

Unit II (Lectures 10)

Unit III (Lectures 10)

Unit V (Lectures 04)

B.Tech (EEE) Syllabus Applicable w.e.f. Academic Session 2014-15 Page 11

Course Code: ECS101/ECS201 L T P C

Unit II (Lectures 08)

Unit III (Lectures 08)

Unit IV (Lectures 08)

Unit V (Lectures 08)

B.Tech (EEE) Syllabus Applicable w.e.f. Academic Session 2014-15 Page 12

Course Code: EAS104/EAS204 L T P C

Unit I (Lectures 08)

Unit II (Lectures 08)

Unit III (Lectures 08)

Unit IV (Lectures 08)