0% found this document useful (0 votes)

432 views174 pages

Microstation Powerdraft For Students: Bentley Institute Course Guide

Bentley, the "B" Bentley logo, MDL, MicroStation and SmartLine are registered trademarks; Bentley SELECT is a service mark of Bentley Systems, Incorporated or Bentley Software, Inc. Java and all Java-based trademarks and logos are trademarks or registered trademarks of sun microsystems, Inc. In the U.S. And other countries.

Uploaded by

322399mk7086

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as PDF, TXT or read online on Scribd

0% found this document useful (0 votes)

432 views174 pages

Microstation Powerdraft For Students: Bentley Institute Course Guide

Uploaded by

322399mk7086

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as PDF, TXT or read online on Scribd

You are on page 1/ 174

MicroStation PowerDraft for

Students
Bentley Institute Course Guide
Trademarks

AccuDraw, Bentley, the “B” Bentley logo, MDL, MicroStation and SmartLine are registered
trademarks; PopSet and Raster Manager are trademarks; Bentley SELECT is a service mark
of Bentley Systems, Incorporated or Bentley Software, Inc.

Java and all Java-based trademarks and logos are trademarks or registered trademarks of Sun
Microsystems, Inc. in the U.S. and other countries.

Adobe, the Adobe logo, Acrobat, the Acrobat logo, Distiller, Exchange, and PostScript are
trademarks of Adobe Systems Incorporated.

Windows, Microsoft and Visual Basic are registered trademarks of Microsoft Corporation.

AutoCAD is a registered trademark of Autodesk, Inc.

Other brands and product names are the trademarks of their respective owners.

Patents

United States Patent Nos. 5,8.15,415 and 5,784,068 and 6,199,125.

Copyrights

©1995-2007 Bentley Systems, Incorporated.

MicroStation ©1998 Bentley Systems, Incorporated.
IGDS file formats ©1981-1988 Intergraph Corporation.
Intergraph Raster File Formats ©1993 Intergraph Corporation.
Portions ©1992 – 1994 Summit Software Company.
Portions ©1992 – 1997 Spotlight Graphics, Inc.
Portions ©1993 – 1995 Criterion Software Ltd. and its licensors.
Portions ©1992 – 1998 Sun MicroSystems, Inc.
Portions ©Unigraphics Solutions, Inc.
Icc ©1991 – 1995 by AT&T, Christopher W. Fraser, and David R. Hanson. All rights
reserved.
Portions ©1997 – 1999 HMR, Inc. All rights reserved.
Portions ©1992 – 1997 STEP Tools, Inc.
Sentry Spelling-Checker Engine ©1993 Wintertree Software Inc.
Unpublished – rights reserved under the copyright laws of the United States and other
countries. All rights reserved.

2/23/07 ii
Table of Contents

Introduction _______________________________________i

MicroStation PowerDraft Concepts ____________________1-1

System Overview _____________________________________ 1-1
Positioning the Cursor _________________________________ 1-1
Menus ______________________________________________ 1-1
Elements ____________________________________________ 1-2
Levels ______________________________________________ 1-2
Reference Drawings ___________________________________ 1-2
Views ______________________________________________ 1-2
View Control ________________________________________ 1-3
Attributes ___________________________________________ 1-3
Real World Coordinates ________________________________ 1-3
Snap _______________________________________________ 1-3
Design Plane _________________________________________ 1-3
Global Origin ________________________________________ 1-4
Handle Point _____________________________________ 1-4
Coordinate Entry __________________________________ 1-4
Going On From Here __________________________________ 1-5
Lesson 1: File Navigation _______________________________ 1-6
File Extension ____________________________________ 1-6
File Save/Backup/Workfile __________________________ 1-6
To Load a File ____________________________________ 1-6
New Design File___________________________________ 1-6
Lesson 2: First Things First______________________________ 1-7
MicroStation PowerDraft Menus ______________________ 1-7
MicroStation PowerDraft Settings _____________________ 1-8
Exercises ________________________________________ 1-8
Grids ___________________________________________ 1-9
Coordinate Readout ________________________________ 1-10
Status bar ________________________________________ 1-10
Lesson 3: Beginning to Draw ____________________________ 1-10
Task Navigation ______________________________________ 1-13
Controlling the view ___________________________________ 1-14
The Reset Button _____________________________________ 1-15
Drawing Elements _________________________________ 1-15
Continuous Draw Mode ________________________________ 1-16

iii
Table of Contents

Tool Settings _________________________________________ 1-16

Searching for a Needed Tool_____________________________ 1-16
Input Focus__________________________________________ 1-17

Changing Things ___________________________________2-19

Lesson 4: Manipulating Elements _________________________ 2-19
Lesson 5: Modifying Elements ___________________________ 2-21
Modify tool box ___________________________________ 2-22
Lesson 6: Changing Element Attributes ____________________ 2-22
Exercise 1: Schematic _______________________________ 2-24
Text Styles _______________________________________ 2-29
Summary____________________________________________ 2-29

Menu Survey _______________________________________3-31

File Menu ___________________________________________ 3-31
Edit Menu___________________________________________ 3-33
Element Menu _______________________________________ 3-35
Settings Menu ________________________________________ 3-36
Snaps Menu ______________________________________ 3-37
Tools Menu__________________________________________ 3-40
Utilities Menu ________________________________________ 3-43
Workspace Menu _____________________________________ 3-45
Window Menu _______________________________________ 3-46
Help Menu __________________________________________ 3-47
Summary____________________________________________ 3-47

Input of Precise Geometric Data _______________________4-49

Lesson 7: Key in of Coordinate Data ______________________ 4-49
Using Key-In Commands ____________________________ 4-49
Key-In of Coordinate Data Using AccuDraw _____________ 4-51
Exercise 2: Stepped-Shaft ____________________________ 4-52
Summary____________________________________________ 4-55

Working with Groups ________________________________5-57

Lesson 8: Fences ______________________________________ 5-57
Fence Tool Box ______________________________________ 5-58
Three Most Common Fence Tools_____________________ 5-58
Lesson 9: Element Selection Tool _________________________ 5-59
Exercise 3: Sprinkler Protector ________________________ 5-60
Review _____________________________________________ 5-62
File Navigation ____________________________________ 5-62
Menus___________________________________________ 5-62
Master-Sub Working Units and Grids___________________ 5-62
Main and Task Navigator tool boxes ___________________ 5-62
Panning and View Control in middle of a command________ 5-62

iv
Table of Contents

Data-Reset-Tentative _______________________________ 5-63

AccuSnap ________________________________________ 5-63
Accept/Reject ____________________________________ 5-63
Tool Settings Window ______________________________ 5-63
Command and Prompt ______________________________ 5-63
Manipulating and Modifying Element___________________ 5-63
Input Focus ______________________________________ 5-64
Positional Mapping_________________________________ 5-64
AccuDraw _______________________________________ 5-64

Using Levels _______________________________________6-67

Lesson 10: Levels _____________________________________ 6-67
Level Manager dialog box ____________________________ 6-67
Level Display dialog box_____________________________ 6-68
Lesson 11: Moving Elements Between Levels ________________ 6-69
Lesson 12: Level Locks _________________________________ 6-70

Using Multi-lines ___________________________________7-71

Lesson 13: Multi-line Set-up _____________________________ 7-71
Lesson 14: Placing Multi-Lines ___________________________ 7-72
Lesson 15: Cleaning up Multi-line Joints ____________________ 7-72
Exercise 4: Floor Plan_______________________________ 7-73

Text ______________________________________________8-77
Lesson 16: Text Settings ________________________________ 8-77
Fonts_______________________________________________ 8-77
Text Justification______________________________________ 8-78
Text Size and Spacing __________________________________ 8-78
Lesson 17: Placing Text_________________________________ 8-79
Place Text Tools___________________________________ 8-79
Lesson 18: Editing Text ________________________________ 8-80
Exercise 5: Notes on Floor Plan _______________________ 8-81

Cells ______________________________________________9-83
Lesson 19: Cell Library Creation __________________________ 9-83
Lesson 20: Cell Library Attachment _______________________ 9-84
Lesson 21: Creating Cells _______________________________ 9-84
Lesson 22: Placing Cells ________________________________ 9-85
Cells Tool Box ____________________________________ 9-86
Exercise 6: Add Symbols to the Floor Plan_______________ 9-87

Patterning and Crosshatching _________________________10-89

Patterning Tool Box ___________________________________ 10-89
Lesson 23: Hatch Area Tool _____________________________ 10-90
Lesson 24: Crosshatch Area Tool _________________________ 10-91

v
Table of Contents

Lesson 25: Pattern Area Tool ____________________________ 10-91

Delete Pattern Tool____________________________________ 10-92
Hatching Around Text _________________________________ 10-92
Exercise 7: Hatch Walls _____________________________ 10-93

Dimensioning ______________________________________11-95
Annotation Scale ______________________________________ 11-95
Dimension Element ___________________________________ 11-96
Dimension Styles _____________________________________ 11-96
Dimensioning tool box ______________________________ 11-96
Lesson 26: Placing Dimensions ___________________________ 11-97
Linear Dimensioning tool ____________________________ 11-97
Linear Dimension tool box___________________________ 11-98
Lesson 27: Placing Angular Dimensions ____________________ 11-98
Angular Dimensioning tool __________________________ 11-98
Angular Dimensions tool box_________________________ 11-99
Lesson 28: Placing Radial Dimensions _____________________ 11-99
Dimension Diameter tool ____________________________ 11-99
Misc(ellaneous) Dimensions tool box ___________________ 11-100
Exercise 8: Dimensioning ____________________________ 11-100

Comprehensive Exercise _____________________________12-103

Exercise 9 - City Tract Map __________________________ 12-103

Printing Your Drawing _______________________________13-115

Defining What to Print _________________________________ 13-115
Printer and Paper Size ______________________________ 13-116
Print Scale and Position _____________________________ 13-117
Print dialog box icons _______________________________ 13-118

Summary of 2D and Moving On _______________________14-121

Selected Advanced 2D Topics____________________________ 14-121
Differences between MicroStation PowerDraft and AutoCAD ___ 14-123

3D Concepts _______________________________________15-125
Basic 3D Concepts ____________________________________ 15-125
The Right Hand Rule _______________________________ 15-126
Eight Standard Views _______________________________ 15-127
Screen Axis vs. Model Axis___________________________ 15-127
The Right Hand Rule for Angles ______________________ 15-128
View Volume _____________________________________ 15-128
Active Depth _____________________________________ 15-129
Lesson 29 - Understanding 3D Concepts ___________________ 15-129

vi
Table of Contents

Precise 3D Input ____________________________________16-133

AccuDraw in 3D______________________________________ 16-133
Exercise 10: 3D Model of a Kite_______________________ 16-134
Lesson 30: Projecting 2D into 3D Models___________________ 16-135
Exercise 11: 2D Floor Plan Converted to 3D _____________ 16-135

Creating and Manipulating Solid Models _______________17-139

Lesson 31: Basic Approach ______________________________ 17-139
Exercise 12: Creating a U bracket ______________________ 17-140
Lesson 32: Joining Primitives to Make More Complex Solids ____ 17-141
Exercise 13: Creating an L bracket by the union of two slabs _ 17-142
Lesson 33: More on Features ____________________________ 17-142
Exercise 14: Modify Solid in MicroStation _______________ 17-143
Exercise 15: Create a Roller bearing with mounting bracket __ 17-144
Modeling Summary_________________________________ 17-145

Reference Files and Drawing Composition ______________18-147

Lesson 34: Reference Files ______________________________ 18-147
Design Reference __________________________________ 18-147
Reference Raster___________________________________ 18-149
Raster Reference Files ______________________________ 18-149
Lesson 35: Drawing Composition from 3D Models ___________ 18-150
Creating Sheet models ______________________________ 18-150

Rendering and Animation ____________________________19-157

Rendering ___________________________________________ 19-157
Ray Tracing and radiosity _______________________________ 19-157
Animation in MicroStation PowerDraft ____________________ 19-158
Creating a Flythrough _______________________________ 19-158
Animation Producer ________________________________ 19-160

Appendix __________________________________________20-163
Shortcut 2D key-in commands ___________________________ 20-163

vii
MicroStation PowerDraft for Students Copyright © 2007 Bentley Systems, Incorporated Do Not Duplicate

2/23/07 viii
Introduction

What is in the MicroStation PowerDraft Student Training Guide?

The MicroStation PowerDraft Training Guide is a collection of lessons and lab exercises
designed for a CAD course using Bentley Systems’ MicroStation PowerDraft Academic Suite
as the software. It is the only book on the market that covers an introduction to MicroStation
PowerDraft 2D and 3D. It is also useful for users of other CAD who need to quickly get
started in MicroStation PowerDraft.

The exercises are a combination of text and illustrations in a step-by-step format intended to
guide you from beginning to intermediate level. Exercises are self-explanatory and can be
used self-guided or as a text for a short course or classroom semester course combined with
lecture and demonstration.

For additional, in-depth information on MicroStation PowerDraft, refer to the product’s Help
file. The Help file supplied with the product includes a Getting Started section, which is very
useful for getting started. Help is always the most up to date reference information for a
particular release of the software. docs.bentley.com is your repository of product help files
and books. You can browse through online help for specific information or download it to
ensure you have the most recent help available on your computer.

The exercises in this book have been developed through a number of presentations and have
been reviewed and perfected with the help of many students and instructors. We sincerely
hope that you will find them helpful and useful.

Who Should Use This Book?

Anyone who wants to quickly learn how to use MicroStation PowerDraft to produce technical
drawings and 3D models.

What Software Version is it for?

This book is written for MicroStation PowerDraft V8 XM Edition and later.

2/23/07 i
How to Read This Book

How to Read This Book

The MicroStation PowerDraft Training Guide is designed to use minimum words and
maximum step-by-step exercises to take you quickly up the learning curve. Each subject is
introduced with a very short description and then a step-by-step exercise. You can skip the
description and go directly to exercises if you want.

Menu selections are shown with each step separated by “>.” For example, “Settings > Design
File > Grids” means that you first select the Settings menu at the top of the screen, then
select Design File from the list, and then select Grids.

2/23/07 ii
1 MicroStation PowerDraft
Concepts
If you are new to CAD, read this section carefully; if you are experienced in CAD, you may go
directly to Lesson 1: File Navigation on page 6.

System Overview
MicroStation PowerDraft can be operated as a 2D general-purpose drafting program or as a
full 3D modeling program. The first few chapters on MicroStation PowerDraft address 2D
drafting; 3D will be introduced later. The 2D commands learned also apply to 3D.
MicroStation PowerDraft is an extract from MicroStation, intended for the production
drafting function. It is essentially the same as MicroStation 2D plus some of the 3D.

Positioning the Cursor

MicroStation PowerDraft receives its graphic input from the mouse or digitizer. This manual
refers to the graphic input device as a mouse, i.e., the object you use to move the graphic
cursor on the screen.

Menus
MicroStation PowerDraft commands appear on menus. A menu is a list of options available
to you. Each menu has a specific purpose. For example, the File menu allows you to enter a
command to open or retrieve a drawing you have previously saved. A file is a place in the
computer where a drawing is stored. This manual interchangeably uses File or Drawings.

Some menu selections cause a dialog box to open. A dialog box provides further options for a
menu command.

Some menus can be opened as a tool box. A tool box is a list of little drawings called icons.
You can click on an icon to command MicroStation PowerDraft. For example, click on the
little circle to command MicroStation PowerDraft to draw a circle.

2/23/07 1-1
Elements

Elements
MicroStation PowerDraft allows you to create a drawing using basic building blocks called
elements. Other CAD software programs refer to these building blocks as objects or entities
or primitives. Elements include lines, circles, arcs, French curves (Bézier curves), points, text
and more.

Cells (referred to as symbols or blocks in other software) are created from elements and
stored in libraries for later use.

Series of elements can be connected such as lines, arcs and curves into “complex chains.” The
complex chain can then be treated as an element. Some software call these connected
elements a “polyline.” MicroStation PowerDraft also uses the term “SmartLine” for
connected elements.

Levels
MicroStation PowerDraft allows you to manipulate an unlimited number of different layers or
levels. A level can be thought of as one sheet of clear plastic. All elements with the same level
number are on the same sheet. Turning on one level is like viewing only one sheet. Turning
on a second level is like placing a second sheet on top of the first.

Reference Drawings
Information can also be separated by use of Reference drawings. When making a new
drawing, any existing drawings can be viewed simultaneously with the new drawing. When a
drawing is viewed as such, it is called a “reference drawing” since it is being used as a
reference for the new drawing. An example would be to view a floor plan as a reference when
making a new drawing of the electrical wiring for a house. A new drawing can reference any
number of other drawings.

Views
MicroStation PowerDraft can display from 1 to 8 different views of the same file (2D drawing
or 3D model). Each view is independent of the other views.

2/23/07 1-2
View Control

View Control
MicroStation PowerDraft allows you to view your drawing through up to eight windows. You
can move each viewing window around, and thus look at different portions of your drawing.
In addition, you can shrink the window so that you are looking at a tiny detail of the drawing
(magnified to fill the view on your display screen). Or, you can take a “birds eye” view by
“zooming out” to look at your entire design from a distance.

Attributes
Each element you create is automatically assigned certain attributes that stay with it. For
example, a line will have a ‘linestyle’, i.e. solid, dashed, dotted, etc. Other attributes include
color, level number and line width. The attributes of an element can be changed after it is
placed.

Real World Coordinates

Each drawing is created using the appropriate “real world” units. Whether the drawing
consists of a 100 millimeter machine part or a 1000 foot facilities layout, you can create and
position each element in its actual dimensions. All scaling for the sake of putting your design
on paper is done at the time you send your design to the plotter.

Snap
Snapping pulls (or snaps) the cursor to a precise X, Y location that you desire. Several
different types of snap can be selected from the Snap menu. Keypoint is the most common.
Keypoints are the characteristic points on an element such as end-points and center of a line,
center and quarter-points of a circle. You can also snap to the intersection of two lines,
tangent or perpendicular, and more. MicroStation PowerDraft V8 introduced AccuSnap,
which automatically finds the nearest snap point when Accusnap is active.

Design Plane
MicroStation PowerDraft uses the concept of a design plane. A MicroStation PowerDraft
design plane is essentially infinite in either direction. Actually coordinates are stored in 64 bit
IEEE floating point which provides a huge range of coordinates that for all practical
purposes is infinite.

2/23/07 1-3
Global Origin

Global Origin
Since the design plane is really a coordinate system that you draw on, somewhere in the
design plane there has to be a point with the coordinates 0,0. This point is referred to as the
global origin. This coordinate system is set up for master units. In other words, the coordinate
1,0 lies one master unit to the right of the global origin, and the coordinate 1.5,0 lies one and
one half master units to the right of the global origin.

The following illustration shows you the coordinate layout of a design plane.

Handle Point

A handle point is the point on an element by which you control placement or modification.
When adding elements to your drawing, you are guided by prompts; for example, Place first
point of line, place center of circle, etc.

When modifying elements, such as moving a rectangle (called a block in MicroStation

PowerDraft) you control its movement with the point at which you select it.

Coordinate Entry

There are several ways to enter the X and Y coordinates for placement of an element. When a
prompt calls for the location of a point, you can move the cursor to the desired coordinates
and press the mouse button. Or, you can type XY=a,b <return> to supply the coordinates a
and b from the keyboard. These are called absolute coordinates.

2/23/07 1-4
Going On From Here

Or, you can type DL=c,d <return> to supply c (the change in X from the previous location)
and d (the change in Y). These are called relative coordinates.

Or, you can type DI=e,f <return> to supply the radius “e” and angle “f ” of polar coordinate
changes from the previous location. These are called polar coordinates.

MicroStation PowerDraft 95 introduced a new method of entering coordinates called

AccuDraw. AccuDraw uses your hand motion to determine whether you want to enter
positive or negative, x or y coordinates and then you simply type the number representing the
distance. AccuDraw greatly reduces the number of keystrokes required to enter precise
coordinates.

Going On From Here

At this point you have a basic understanding of the concepts of MicroStation PowerDraft.
This is a good time to sit at a computer with MicroStation PowerDraft and begin to get some
hands-on experience.

If you have carefully read this introduction, you have a head start in using the MicroStation
PowerDraft program. Don’t worry if some of it doesn’t make sense; after you have worked
with the system for a while it will fall into place. When you have gained a little experience,
come back and read these concepts again and try reading the MicroStation PowerDraft
Getting Started in the Help from MicroStation PowerDraft main menu.

From this point, we will shift to a lesson style that includes short readings and hands-on work.
After a few lessons, we will shift to an emphasis on exercises where you will quickly learn to
produce real designs.

2/23/07 1-5
Lesson 1: File Navigation

Lesson 1: File Navigation

You save and retrieve drawings (called files in computer terminology) using a dialog box. The
MicroStation Manager dialog box displays when you first launch MicroStation PowerDraft.
Or, you can select File and then Open when you are already running MicroStation
PowerDraft. In either case, the operation of the dialog box is similar. The right hand list
shows the directories (or folders) that you can open to find your file. The list at the left shows
the names of the files within the selected directory that meet the Type of file you want.
MicroStation PowerDraft files have a .dgn extension so in the MicroStation Manager you will
be looking for Files of type: *.dgn. You double-click on directories to change to a different
directory and you double-click on file names to load a file. Try these operations:

From MicroStation PowerDraft, select File > Open.

To change directories, click on directories listed in right-hand box, then click on the folder
you want to open.

File Extension

Note that MicroStation PowerDraft drawing files have an extension .DGN (similar to
AutoCAD .DWG, VersaCAD .2D, etc.)

File Save/Backup/Workfile

Some CAD software such as VersaCAD or AutoCAD have a Workfile concept. The saved
drawing is loaded into the workfile, then work is done. Then the drawing is “saved” from the
Workfile back to the Saved file.

MicroStation PowerDraft works on the saved file directly. So, to create a backup, it is
necessary to make a copy of the MicroStation PowerDraft file before starting a work session.
Or, more likely, save a backup copy at the end of each successful session. Just press Function
key <F3> and a copy of your file will be saved with extension .bak

To Load a File

Use the File pull-down in upper left corner to load recently used files. Or, double-click on File
name shown in left hand box when ready.

New Design File

Use a Seed file to start a new design file. A Seed file is like a template.

2/23/07 1-6
Lesson 2: First Things First

The Seed file presets settings and parameters conveniently for an application.

As an exercise, try this from the File pull-down on the main menu:
1 Select New.
2 In the New dialog box, click the Browse button (lower right corner of dialog).
3 In the Select Seed File dialog box, select the seed file, seed2D.dgn and double-click it
or click Open.
4 Back in the New dialog box, supply the file name (the .dgn extension is added
automatically).
5 Click Save.

This creates a new file with name you supplied in step 4. The file will be saved in the directory
folder you selected in Save in at top of dialog box. You can click on My Documents on the
left and keep all your files there conveniently.

Lesson 2: First Things First

MicroStation PowerDraft Menus

MicroStation PowerDraft offers several ways to do commands:

2/23/07 1-7
Lesson 2: First Things First

1 Click-click — click on the menu name at the top of the screen. Then click on the
menu item in the pull-down.
2 Click/drag/let go — hold the button down over menu and keep it down while
moving to menu item in pull-down. Then let go of the button.
3 Powerkey — press <Alt> and underlined letter on main menu. Press only the
underlined letter in sub menus.
4 Type in the complete command after opening the Key-in dialog box (Utilities > Key-
in).
5 Type-in the command abbreviation See the Appendix (page 163) for a list of
command shortcuts.
6 Use the Key-in Browser in Help or Utilities > Key-in.
7 Use the single keystrokes, such as <Q> then <2> to start the Place Line tool. Note
the single letters at lower left of each icon.

MicroStation PowerDraft Settings

The first thing to do with any new design file is to set up the working units. Users often set
the working units in the company’s standard seed files so you may not have to do this step.
But, for new users, it is good to practice settings.

MicroStation PowerDraft has a flexible dimensional unit system for which there are two
parts:
mu - master units (for example, feet)
su - sub units (for example, inches)

A practical set up would be:

mu = feet
su = inches (12 per foot)

) MicroStation PowerDraft previously used an integer system where subunits had to be divided
into “positional units.” Starting with V8, positional units are no longer required.

Exercises

To experiment with menus and to set up working units before adding any geometry to a new
file, try getting to Working Units in three different ways, first:
1 From the main menu, select Settings, then Design File.
2 In the DGN File Settings dialog box, select the Working Units category.

2/23/07 1-8
Lesson 2: First Things First

3 Click on Cancel.

Then try:
1 Click on Settings and keep the button depressed.
2 Drag the cursor to Design File, then release button.
3 Click on Cancel.

Finally, try:
1 While pressing the <Alt>, type <S>.
2 Type <D>, then <W>.
3 Change the Master Unit to Feet.
4 Use the <Tab> key to the Label field and key in the mark “ ' ” for feet.
5 Use the <Tab> key to go to Sub Unit.
Sub units were automatically changed to inches.
6 <Tab> to the Label field and enter “ '' ” to represent inches on drawings.
7 To accept the changes:
tab until OK is highlighted and then press <Enter>
or
type <Alt-O> since O is underlined
or
move the cursor to OK and click the button

Your drawing file is now set up for a drawing of feet and inches. To set up a mechanical
drawing, use inches or millimeters for master units.

Grids

To make your whole file consistent, change the grid which is presently a reference line every
10 inches to every 12 inches:
1 Click on Settings > Design File.
2 In the DGN File Settings dialog box,
select the Grid category.
3 Turn on Grid Lock (a check mark in the
box).
4 Change Grid Master to 0:1 (i.e., 1'').
5 Change Grid Reference to 12.
6 Click OK to close the DGN File Settings dialog box.

2/23/07 1-9
Lesson 3: Beginning to Draw

You now have set up a normal architectural file. To save these settings for the next time you
open this drawing, go to File > Save Settings and click.

Coordinate Readout

MicroStation PowerDraft shows you coordinates in the format: mu:su, for example, 5:4.125.
This example means the following: 5 master units and 4.125 subunits. This format is useful
when working with master units in feet and subunits in inches, such as architectural drawings.
The example 5:4.125 would represent 5'-4.125''. For this format, choose Settings > Design
File > Working Units and set Format to MU:SU. Set Accuracy to something reasonable, for
example 1/16, then above example would show as 5'-4 1/8'' (Accuracy means the precision
by which coordinates and dimensions will be displayed. Coordinates are stored in the
computer to much greater precision.)

When working with units in inches and decimal inches or millimeters and decimal mm as is
common for mechanical drawings, the coordinate readout is better understood as 5.4125
rather than 5:4.125.

When working with mechanical drawings, civil drawings or any drawing that is expressed in
units and decimal units, choose Settings > Design File > Working Units and then change
Format to MU, master units. Change the Accuracy to something appropriate to your
requirements, for example 0.12 to represent 2 decimal digits of precision.

Status bar

The Status bar provides prompts, context-sensitive assistance, and some interactive
functionality. It displays at the bottom of the application window. The left most section shows
the name of the selected tool or view control and (usually) a prompt for the next step in the
normal procedure for using it.

Lesson 3: Beginning to Draw

There are several different ways to display the Main tool box for adding elements and
modifying elements after they are added to a file. Normally, when MicroStation PowerDraft is
installed and first launched, the Main tool box displays automatically.

Since the XM edition, the Main tool box is split between commands that add graphics to the
file and the commands that modify what is in the file (or “on the drawing” to use different
words). Here is a screen showing that approach which puts a single column of commands on
either side of the drawing View or views:

2/23/07 1-10
Lesson 3: Beginning to Draw

The icons on the tool bar on the left are the ones that are used to modify a drawing. This is
the Main tool box. The icons on the right of the screen are the ones to use to place elements
such as lines, circles, text, etc. This is the Task Navigation bar.

Older versions, including V8 2004 Edition, open with both drawing and modifying tools in
one tool box. That approach can still be used by selecting Tools > Tool Boxes > Main Classic.

For Classic MicroStation PowerDraft, the Main tool box is a 1 column x 14 row tool box of
tools. Each of the tools in the tool box is the first in a sub-tool box that can be pulled out for
other tools in the same family. For example, all of the tools to draw circles or arcs are in the
tool box starting with Place Circle. Nearly every tool for drawing things can be found on the
Main tool box.

In Classic MicroStation PowerDraft, if you press the left mouse button down while over one
of the tools and drag your hand to the right, you will see the name of the tool on the prompt
line at the bottom of the screen.

Since the XM edition, if you click on a tool in the Main tool box and hold down the mouse
button, all of the subtools display in a list with the icon, the single stroke character (positional

2/23/07 1-11
Lesson 3: Beginning to Draw

keyboard navigation) and the name of the command. Positional keyboard navigation is a
technique that utilizes a position-mapped keyboard. Position mapping is the mapping of
keyboard zones to logical collections of controls in the user interface.

With Classic or XM versions, you can dock the Main tool box at the left or right side of your
screen by using the mouse to place the cursor at the top border of the frame, press down on
the left mouse button, and hold it down while you slide the frame firmly to the left or right.

Classic MicroStation PowerDraft Main Tool Box

The tools in Classic and XM are the same. For simplicity, we will use the Classic version to
describe some of the major tools.

The small black arrow at lower right of each tool means that if you click and hold down, and
move your hand to the right you will see the other tools.

The tools included in MicroStation PowerDraft are the same as the tool in MicroStation.
Everything you learn in MicroStation PowerDraft is directly transferable when you use
MicroStation.

Briefly review the first 14 tools of the Classic MicroStation PowerDraft Main tool box.

Classic MicroStation PowerDraft has same tools arranged in one long column.

2/23/07 1-12
Task Navigation

MicroStation PowerDraft XM Edition has the same tools in two single columns.

Element Selection: Used to select a tool. Place SmartLine: Used to place linear elements.
Place Circle: Used to place ellipses, circles and Place Block: Used to place planar polygonal shapes.
arcs.

Place Text: Used to place text, modify existing Place Active Cell: Used to place and manipulate cells.
text elements, and fill in enter data fields.
Hatch Area: Used to pattern both areas and Measure Distance: Used to perform measuring operations.
along linear elements.
Dimension Element: Used to perform Drop Element: Used to drop or create complex elements
dimensioning. from their component elements.
Copy: Used to copy, move, resize, rotate, mirror, Change Element Attributes: Used to change an element(s)
and create arrays of elements. to the active element attribute settings.
Modify Element: Used to modify element Delete Element: Used to remove an element.
geometry.

Task Navigation
The Task Navigation tool box contains the Task List and the tools of the active task. In the
as-delivered application window layout, the Task Navigation tool box is docked to the right-
hand edge of the application window, and the active task is the Drawing task.

2/23/07 1-13
Controlling the view

Controlling the view

Briefly review the tools of the View Control tool bar. These are essentially the same as the
view control tools that appear on the top of a view when using the XM edition

You do not need to display the View Control tool bar to access these tools. In the Classic
edition, at the bottom left corner of each Window view, all the View Control tools are
displayed except Copy View. In XM edition, they are displayed at the top of the view.

Update View Used to update (redraw) the contents of a view window(s)

Zoom In Used to increase a view window's magnification, making elements appear

larger

Zoom Out Used to decrease a view's magnification, making elements appear smaller

Window Area Used to indicate a rectangular area in the design that is to be displayed in a view

Fit View Used to adjust the view magnification so that the entire design is visible in the
view

Rotate View Used to rotate a view

Pan View Used to view a different part of the design without changing the view
magnification

View Previous See previous view

View Next Come back after previous view

Copy View Used to copy the contents of an entire view and its corresponding attributes to
other views

The paint brush just repaints the screen. The open window is for zooming in to an outlined
area, the magnifying glass with + zooms in and with - zooms out. The picture of the dark
mountains is to “fit” the drawing to available view.

To Pan across the drawing, press the <shift> key and move the graphics cursor away from the
center of the view while holding the data button down.

2/23/07 1-14
The Reset Button

View control is attached to the bottom of each view. In addition to <Shift-click>, you can
Pan with Pan View tool.

The Reset Button

MicroStation PowerDraft is set up for a two-button mouse or digitizer puck. One of the
buttons is the data button, i. e., the button for clicking to select a menu or to enter a
coordinate pair (X & Y) location.

The other button is called Reset and is used for different things including to: reset to
beginning of commands, reject a tentative selection or select a snap point.

Snapping is one of the basic features of any CAD system. MicroStation PowerDraft offers a
number of different types of snap. Right now, we are set up to snap automatically on grid
points (every inch) or to a keypoint on an object.

To snap to a keypoint, the reset and data buttons are pressed at-the-same-time. A large cursor
will appear showing the “tentative” location you snapped to. If you like it, press the data
button once more. If you don't like it, press the reset button, then try again.

Your computer may be setup with a 3 button mouse. In that case, you will want to setup so
you can press the middle button on your mouse rather than the reset and data buttons.

If you have a three-button mouse, and the middle button is not functioning for snapping, go
to Workspace > Button Assignments. Highlight tentative in the list box, then move the cursor
to the Button Definition Area and press the middle button. Note the change in the list box.
Click OK. Then select File > Save Settings. Your middle mouse button should now function
for snapping.

Since the V8 edition of MicroStation PowerDraft, snapping can be done automatically with
AccuSnap. More on AccuSnap later.

Drawing Elements

Now, we are ready to start drawing or creating our design file.

Let’s start by making a scratch-pad drawing of the most used drawing tools:

1 Use the Place SmartLine tool to draw a line between three dots (grid reference
points).
2 Use the Place Block tool to draw a box.

2/23/07 1-15
Continuous Draw Mode

3 Use the Place Arc tool to draw an arc.

4 Use the Place Circle tool to draw a circle until you have drawn one each of everything
you can by watching the prompt messages displayed at the bottom of the screen after
selecting each drawing tool.

Continuous Draw Mode

MicroStation PowerDraft is in continuous-draw-mode. For example, when drawing lines,
after drawing one line, MicroStation PowerDraft is ready to draw the next line, and then the
next. There are several ways to stop drawing lines:
1 To stop drawing lines and begin another tool such as circle, click on the Place Circle
tool.
2 To stop drawing lines but stay in the line drawing tool, press the Reset button.
3 To stop drawing lines and exit all commands, click on the Element Selection tool.

One exception to above: When drawing curves, you must accept the desired curve using the
Reset button before terminating the curve drawing tool.

Tool Settings
The tool settings contents and heading change depending on which tool is in use. The tool
settings window opens automatically when you select a tool. It contains all of the settings
available for that particular tool. Note the colored ball at top of screen. This is called PopSet.
If green, the tool settings appear right next to the tool you select. It disappears when you
move the cursor beyond it. If red, the tool settings dialog is always displayed.

Searching for a Needed Tool

If you’re not sure what function an icon performs, simply move the cursor over it and the
short description of the command displays at the bottom of the screen. Or, if the icon is part
of a sub tool box, hold the left mouse button down as you slide over the icons. Again, the
command displays at the bottom of the screen in Classic editions or in the tool list alongside
the tool bar in the XM edition.

2/23/07 1-16
Input Focus

Input Focus
Just like any Windows software, you must have the “input focus” on the dialog box where you
want to input the data. For example, if you have the tool settings open, and some other dialog
at the same time, MicroStation PowerDraft needs to know which dialog box you want to
enter data into. Just click the top bar of the dialog box to make it active.

2/23/07 1-17
MicroStation PowerDraft for Students Copyright © 2007 Bentley Systems, Incorporated Do Not Duplicate

2/23/07 1-18
2 Changing Things

All design drawings will be changed a number of times before final approval and fabrication
of the part or construction of the project. That is because a drawing is one of the principal
means of communication between the designer and the client. It is supposed to be that way.
Consequently, any CAD software should be very good for making changes if it is to be
productive.

MicroStation PowerDraft offers a rich variety of commands for changing elements after they
have been placed in a drawing file. As discussed in Chapter 1, Lesson 3, three tools from the
Main tool box are used to change things:

The Manipulate Element tools are for using one element to create another. For example, you
can scale an element to make a geometrically similar but different sized element. Or, you can
copy one element to make another.

The Modify Element tools are for actually changing an element already in a drawing. For
example, delete half of a circle, or extend a line.

The Change Element Attribute tools are for changing an existing element's color, linestyle,
and other attributes.

The Delete Element tool is for deleting an element. You can also select elements first and
then either this tool or the Delete key on the keyboard.

Lesson 4: Manipulating Elements

Let’s briefly review the Manipulate tools.

Copy Used to copy an element(s).

Move Used to move an element(s).

2/23/07 2-19
Lesson 4: Manipulating Elements

Scale Used to resize an element(s).

Rotate Used to rotate an element(s).

Mirror Used to mirror an element(s).

Construct Array Used to copy an element(s) many times to create an array.

Align Elements by Edge Used to align an element(s) to an edge of another element.

Stretch Used to stretch an element(s).

Move Parallel Used to move or copy an element (line, line string, multi-line, curve, arc,
ellipse, shape, complex chain or complex shape) parallel to the original

Move to Contact Used to move an element(s) in a defined direction until it contacts an

existing element in the model.

After creating a drawing you will want to scale some objects to make them larger or smaller,
copy objects and the like.

Experiment with the manipulate objects commands by:

1 From the Main tool box, open the Manipulate tool box (as we did View Control
earlier).
2 Click the Copy tool.
The name of the function appears in the status bar while holding down the data
button.
The prompt message at the bottom of the screen says to identify the element. That
means to take the cursor to the element and click on it.
3 Try it with one of the lines you entered.
The line is now “glued” to your cursor and you can drag it anywhere.
4 Click again to place the copy. You can make as many copies as you like. Hit Reset to
stay in Copy but without element attached.
5 Click the Move tool.
6 Click on the box you drew.
7 Drag and place it.
The original box has moved to a new location rather than a copy as before.
8 Try the Move Parallet, Scale, Rotate, Mirror, and Construct Array tools on your own.

2/23/07 2-20
Lesson 5: Modifying Elements

The Move Parallel tool, just like Copy, moves parallel to original element. You can
enter an exact distance in the tool settings window. Also, you can check if you want a
copy. Note: The side will be where cursor is relative to original element.

) The Move Parallel tool is very powerful. For example, when laying out a floor plan,
you can draw parallel lines to locate column centerlines or other key locations such as
walls. Then, you can use the extend and trim functions to complete the layout. You
can move lines, arcs and even Bézier curves parallel!

Lesson 5: Modifying Elements

Let’s briefly review the Modify tools.

Modify Element Used to move vertices and line segments, scale, modify rounded
segments and shapes, change a circle's radius and move dimension text

Partial Delete Used to delete part of an element

Break Element Used to break a linear element at a defined point.

Extend Line Used to extend or shorten a line or an end segment of a line string or
multi-line

Extend Elements to Intersection Used to extend or shorten two lines, line strings, or arcs to their
intersection

Extend Element to Intersection Used to extend or shorten a line, line string, or arc to its intersection
with another element

Trim Elements Used to trim or cut an element or series of elements at their

intersection with one or more cutting elements

IntelliTrim Used to trim or extend multiple elements at their intersection with one
or more elements.

Insert Vertex Used to insert a vertex, attach a line segment, extend a point curve, and
add an extension line

Delete Vertex Used to delete a vertex or remove an extension line

Construct Circular Fillet Used to construct a circular fillet between two elements, two segments
of a line string, or two sides of a shape

2/23/07 2-21
Lesson 6: Changing Element Attributes

Construct Chamfer Used to construct a chamfer between two lines or adjacent segments of
a line string or shape

Modify Arc Axis Used to lengthen or shorten an arc’s axis.

Modify tool box

From the Main tool box, open the Modify tool box.

The Modify Element tool is actually a scale-in-place tool. Try selecting several of the elements
to see how each scales.

The Partial Delete tool allows you to take a bite out of an element. Move the cursor to
indicate which part of the object you keep and which you throw away.

The Extend Line tool enables you to stretch a line (in MicroStation PowerDraft, use the
Modify Element tool).

The Extend Elements to Intersection tool automatically extends to the point of intersection.
To try it, select a line then a circle or arc that the line can intersect.

The Trim Element tool trims or cuts an element(s) at the intersection. Select a line to be
“cutter.” Then, select a line, circle or arc it intersects. Click on the side of cutter you want
eliminated.

The IntelliTrim tool simultaneously trims or extends multiple elements at their intersection
with one or more other elements.

The Insert Vertex tool inserts a vertex in a line, line string or shape. Select a box. Pull out a
fifth vertex. (You can even insert a dimension in a chain with this.)

The Delete Vertex tool is the opposite of Insert Vertex tool.

The other Modify Element tools are advanced functions that will be treated later.

Lesson 6: Changing Element Attributes

Let’s briefly review the Change Attributes tools.

2/23/07 2-22
Lesson 6: Changing Element Attributes

Change Element Attributes Used to change selected attributes of an element(s) such as

level, color, line style, line weight or class

Change to Active Area (Change Element Used to change the area attribute of a closed element(s) (shapes,
to Active Area) ellipses, complex shapes, or B-spline curves) to the Active Area

Change to Active Fill Type (Change Used to change a closed element to the Active Fill Type which
Element to Active Fill Type) are none (no fill), opaque (filled with Active color), and outlined
and to change the Active color

Modify Line Style Attributes Used to interactively modify the line style attributes of an
element with a custom line style

Change Multiline Definition (Change Used to change a multi-line's attributes to the active multi-line
Multiline to Active Definition) definition

Match Element Attributes Used to change the active element attribute settings so they
match the attributes of an element in the design

SmartMatch (Match All Element Used to change all active element attribute settings, including
Settings) those specific to particular element types, so they match the
attributes of an element in the design

1 Close all of the tool boxes you have opened by double-clicking the minus sign (-) in
the upper left corner. Leave open the tool settings window.
2 Tear off the Change Attributes tool box.
3 Click on the Change Element Attributes tool.
4 In the Change Element Attributes tool settings window, turn on Color.
5 Hold down the cursor on the colored box and select a new color.
6 Click on any element and see its color change.

) Changing attributes in the Change Attributes tool settings window, changes the attributes to
any new element also. So be sure element attribute settings are what you want before adding
new elements.

2/23/07 2-23
Lesson 6: Changing Element Attributes

Exercise 1: Schematic

In this exercise, you will draw a simple schematic diagram.

You will construct rectangles, polygons, lines and text and learn how to copy elements. This
exercise introduces new concepts so be sure to watch the command and prompt at the
bottom of your screen as you follow these step-by-step instructions.

Î To create a new design file

1 From the File menu, select New.
The New dialog box opens.
2 In the File Name field, type in a name for the new file.
3 At the bottom of the dialog box, click on the Browse button.

) Click means put the cursor on Browse and press the left-mouse button.
4 When the Select Seed File dialog box opens, find seed2D.dgn.
To find the seed file, you may have to navigate to c:\Documents and Settings\All
Users\Application Data\Bentley\Workspace\System\Seed.
5 Double-click (two clicks in rapid succession) with the cursor placed over seed2D.dgn.
This opens your new file with the information stored in this seed file.
6 Click Save to save the file and to open the new file for work.

2/23/07 2-24
Lesson 6: Changing Element Attributes

Î To set the working units and grid settings

1 Click on Settings > Design File.
In the DGN File Settings dialog box, select Working Units.

The seed2d.dgn may have units of feet and inches or meters. We’ll change the master
units to inches.
2 Click on Master Units and select Inches.
3 Click on Sub Units and change to Mils. (It really doesn’t matter in this exercise as we
will only use master units of inches.)
Note your drawing is set up for master units of inches, sub units of thousandths of an
inch (mils).
4 In the DGN File Settings dialog box, under Linear Units, change the Format to MU.
Since we chose inches as our master unit, MicroStation PowerDraft shows us
coordinates in inches and decimal inches rather than with a colon separating master
and sub units.
5 Click OK.
6 In the DGN File Settings dialog box, select the Grid category. Set Grid Master to 0.1
and Grid Reference to 10.
7 Turn on the Grid Lock.
This restrains your drawing to whole tenths of an inch, adequate for this schematic.

2/23/07 2-25
Lesson 6: Changing Element Attributes

8 Click OK to close the DGN File Settings dialog box.

9 If you can’t see the grid, click on Settings > View Attributes and turn on Grid. Then,
zoom in the drawing a few times and you will see the grids.
MicroStation PowerDraft automatically turns off grids if they get too close together.
The dim dots you see are the master grid and the brighter lines or crosses are the
reference grids.

Î To place the rectangles

1 If the Main tool box is not open, select Tools > Main. (If in Classic, go to Tools >
Tool Boxes and select Main Classic from the list.)
This opens the main drawing and editing tool box.
2 Select the Place Block tool.
The Place Block command is shown in the status bar. The prompt for the next
operation is also shown “> Enter First Point.” The options are shown in the tool
settings window that is now titled “Place Block.”
3 In the Place Block tool settings window, be sure that Method is set to Orthogonal,
Area is Solid, and Fill Type is None . Fill Color is not avialable when no Fill Type is
selected.
4 Using your mouse to visually move the cursor, place the cursor over one of the
reference grids. Click the mouse button. Drag the diagonally opposite rectangle
corner one reference grid to the right and two down. Click again.
The prompt says “Enter First Point” again. MicroStation PowerDraft is ready for you
to enter another rectangle.
5 Instead, click on the Element Selection tool in the Main tool box.
6 From the Main tool box (or Manipulate tool box), click the Copy tool.
The command shown in the status bar and the prompt says “identify element.”
7 Take the cursor to the upper left corner of the rectangle you already placed and click
the mouse button. You will see a copy of your rectangle “glued” to your cursor.
8 Try “rejecting” the selection by pressing the right button.
Watch the status bar and you will see the prompt is back to asking you to “identify
element.”
9 Take the cursor close to a corner of the first rectangle. Press the data button.
10 Move your rectangle copy two reference grid lines to the right and click on the
reference point. A new copy appears. Move the cursor two more reference points to
the right and click the data button.
11 Now press the Reset button.
Congratulations! You have successfully placed three rectangles of identical
dimensions precisely on a grid.

2/23/07 2-26
Lesson 6: Changing Element Attributes

Î To make a correction or change

1 If you inadvertently placed an extra rectangle or if one is at the wrong location, from
the Main tool box, click the Delete Element tool. Then click on the bad rectangle.
The bad rectangle is deleted. Try it with one of the good rectangles.
2 Now from the Edit menu, select Undo Delete Element and see the good rectangle
reappear.
3 From the Task Navigation bar on the right hand side of screen, select the Place
SmartLine tool. The Place SmartLine tool is the first icon in the Linear tool box.
The command says “Place Smartline” and the prompt says “Enter first point.”
4 Take the cursor to a point on the right side of first rectangle. Click the data button.
5 Move the cursor to the left side of the middle rectangle keeping the line horizontal.
Click and press the Reset button.
This “disconnects” the line and puts you back ready to enter the first point of
another line.
6 Move the cursor to begin the next line. Repeat 3 - 5 to draw all lines representing the
conductors in your schematic.
To draw the connectors at the ends of each line, you will use a regular polygon.
7 Move the cursor to the Place Block tool in the Task Navigation bar. Press down on
the data button but don’t let up. All the tools in the Polygons tool box displays. Move
to the fourth icon, which looks like an octagon, the Place Regular Polygon tool.
8 With the cursor over the octagon, let up on the data button. The command says
“Place Inscribed Polygon” and the prompt says “Enter point on axis.”
The tool settings window shows that you are drawing a six-sided polygon.
9 Move the cursor to the end point of one of the lines. Click to place the center of the
polygon at the end of the line. Move the cursor and then click to set the polygon
radius.
10 Select the Copy tool.
11 Click on the polygon. If you accidently get the rectangle or the line, press reset to
reject. Keep rejecting until the polygon is selected. Place copies of the polygon at the
connection of each line with a rectangle.

Î To add text
1 Select Element > Text Styles.
2 In the Text Styles dialog box, select the Engineering font from the Font option menu
on the General tab. Change Height and Width to 0.2 inches.

2/23/07 2-27
Lesson 6: Changing Element Attributes

This makes the lettering on your drawing .2 inches wide by .2 high.

3 Close the Text Styles dialog by clicking on the “X” in upper right corner. Answer Yes
to “Do you want to save the changes made?.”
You can move a dialog box by moving your cursor to a point on the title bar, click
and hold the mouse button down and move the dialog box.
4 From the Task Navigation bar, open the Text tool box and select the Place Text tool.
The Text Editor dialog box opens.

5 Type the numeral 1.

6 Move your cursor near your schematic and see the numeral 1 follow. Click on a point
near connector 1 on your drawing.
7 Click on the text window. Press the backspace key to erase the 1.
8 Type the numeral 2. Place it near connector 2.
9 Repeat for all five connectors.
Your first drawing is complete!

2/23/07 2-28
Summary

Text Styles

MicroStation PowerDraft supports text styles and provides an interface for constructing text
using available system fonts and a wide variety of text attributes. A text style comprises a
group of text attributes, such as font type, width, height, and color. Text styles enable you to
place text within a model in a consistent and automated manner.

The fonts that are supported natively in MicroStation PowerDraft are the traditional
MicroStation PowerDraft fonts, TrueType fonts and AutoCAD Shape fonts (.shx).

Î To create a text style

1 From the Element menu, choose Text Styles.
The Text Styles dialog box opens.
2 From the menu bar of the Text Styles dialog box, choose Style > New.
A new “Untitled” style appears in the Text Styles hierarchy tree.
3 Key in the desired name for the new text style.
4 Click <Enter>.
The new text style name appears in the Text Styles hierarchy tree.
5 (Optional) From the Advanced tab, modify the values of text attributes as desired.
The Advanced Tab contains all the settings from the Spacing, Under/Overline and
Background tabs.
6 From the menu bar of the Text Styles dialog box, choose Styles > Save.
The new text style is saved.

Summary
In summary, you have demonstrated that you can:
1 Create a new design file.
2 Setup your working units.
3 Setup your grids.
4 Work with grid lock on.
5 Create graphics with blocks (rectangles), lines and polygons.
6 Setup your text size.
7 Annotate your drawing.
8 Edit by deleting graphics.

2/23/07 2-29
Summary

9 “Undo” a command.
10 Copy graphics.

You are prepared to do complex schematic drawings at this point.

2/23/07 2-30
3 Menu Survey

Now that we are somewhat comfortable with MicroStation PowerDraft, let’s do a menu
survey to see what other things we can do and what other functions we need to learn. Click
on each menu listed as you read this chapter. Don’t get bogged down. This is intended to give
you an overview of functions that are available and where they can be found.

File Menu

New Creates and opens a design file as the active design file.

Open Opens an existing design file or a file of a different type as the active design file. To do it,
scroll up and down the list or change directories and scroll.
Close Closes the active design file and opens the MicroStation Manager dialog box.

Save Saves design changes to the open DGN file.

2/23/07 3-31
File Menu

Save As Opens the Save As dialog box, which is used to save a copy of the design file with a
different name, in a different directory, on a different disk, or in a different file format. If
just a different name is chosen, the copy becomes the active design file.
Compress Reduces the size of the open DGN file by purging empty and unused data resources and
clears the application's undo buffer.When we add and delete elements, all data is kept so
we can 'undo' things. When we compress the file, all deleted elements are thrown away.
Save Settings Saves settings in the active design file. This option is enabled only if the “Save Settings on
Exit” preference is set to off in the Operation category of the Preferences dialog box
(Workspace > Preferences). This allows you to save settings at will, as they are not
automatically saved when you exit the file.
Project Explorer Opens the Project Explorer dialog box, which is used to manage project data within
MicroStation PowerDraft.
Reference Opens the References dialog box, which is used to adjust reference settings and select
reference tools. Allows us to view a separate drawing while working on our current
drawing. Great for things like drawing electrical fixtures on someone else’s floor plan.
One of MicroStation PowerDraft’s strengths. See Reference Files and Drawing
Composition (page 147).
Raster Manager Controls the display of one or more raster images, such as photographs or scanned
drawings, in a design file view.
Models Creates and manages models in a DGN file. You can have several drawings stored in the
same file. Each separate drawing is called a model. They can be 2D or 3D models.
Import Brings a drawing into MicroStation PowerDraft in any of several formats.

Export Sends a MicroStation PowerDraft drawing file out in one of the other formats.

Print Preview Shows how your drawing will look if plotted with current settings.

Print Opens the Print dialog box, which is used to adjust printing settings and create printed
output.Where you go to get a hardcopy of your drawing. If you use the Windows driver,
you can plot to any windows device.
Batch Print Gives you the ability to plot a whole set of drawings

Associate Associates file types with their proper extensions., such as associating a tiff file to open
Display Image. Then, when you drag and drop that file type on the MicroStation
PowerDraft icon, it loads and runs.
Properties Shows the active DGN file's general properties and usage statistics.

Protection Enables protecting a file via a password on other technique.

Send Opens a new email message inside of MicroStation PowerDraft with the current design
file attached. Address, add comments and send the message just as you would for any
email message outside of MicroStation PowerDraft.
1… Numbered list displays file history. If files have been opened previously, lists up to the last
2… ten design files that were most recently opened. Click on any one of them to re-open that
3… file.

Exit Exits MicroStation PowerDraft and returns to the operating system.

2/23/07 3-32
Edit Menu

Edit Menu

Undo Reverses the effect of most recent command.

Undo Other Undo Other > To Mark negates drawing operations performed after a mark was set
by choosing Set Mark from the Edit menu. Undo Other > negates all of the drawing
operations recorded in the Undo buffer.
Redo Reverses Undo.

Set Mark Sets a mark in the undo buffer back to which subsequent drawing operations can be
undone by choosing Undo Other > To Mark.
Cut Removes (cuts) the selected element(s) to the Clipboard for subsequent pasting. The
element(s) remain on the Clipboard until another Cut or Copy is performed.
Copy Copies the selected element(s) to the Clipboard.

Paste Copies the contents of the Clipboard to the design. After choosing Paste from
Clipboard, you must enter a data point to position the element(s) being pasted.
Paste Special Opens the Paste Special dialog box which is used to apply a special display format to
the contents of the Clipboard. Paste Special is dimmed if there are no elements on
the Clipboard. Puts contents of a spreadsheet or Word document onto the drawing
as an image, as an embedded spreadsheet or as a linked spreadsheet.
Group Consolidates selected elements into a group for manipulation as a single entity.

Ungroup Discontinues selected groups. Each ungrouped element can be manipulated by

itself.
Lock Locks selected elements. The attributes and location of a locked element cannot be
changed until Unlock is selected.
Unlock Unlocks selected locked elements. Each unlocked element can be manipulated.

Bring to Front Brings the selected element to the front of the view display.

2/23/07 3-33
Edit Menu

Find/Replace Text Opens the Find/Replace Text dialog box, which is used to search all the text in a
design file for any sequence of letters and numbers and replace some or all instances
of the text with other text.
Select All Selects all elements in the design and creates a Group of all elements in drawing. To
ungroup, click on empty screen.
Select None Deselects all elements in the design.

Select By Attributes Creates a Group by selecting elements with same level, color, linestyle, object type,
etc. A group can then be manipulated using the Manipulate tool box. Use Group
and Ungroup to temporarily turn off and on groups.
Insert Object Choosing Insert Object and then defining a rectangle in a view window opens the
Insert Object dialog box, which is used to link or embed an object in the active
design file from an application that is not currently open.
Update Links Updates embedded or linked objects in a DGN file. The Update Links status bar
displays while the links are being updated.
Links Opens the Links dialog box which is used to update, break, or change the source of
a linked object. This is dimmed if there are no linked objects in your DGN file.
Object This menu item is dimmed unless you have a linked or embedded object selected in
a DGN file. When an object is selected, the Object title changes to reflect the type
of file selected. For example, if you select a linked Excel worksheet, the Object
submenu title changes to Microsoft Excel Worksheet.

2/23/07 3-34
Element Menu

Element Menu

B-splines Controls specific attributes of B-splines and 3D elements being placed in the
design. Changes the characteristics of Bézier curve tool.
Cells Opens the Cell Library dialog box, which is used to attach cell libraries and
activate different types of cells, and to create, delete, and rename cells in the
attached cell library, if one is attached. The name and path of the attached cell
library, if one is attached, are displayed in the title bar.
Dimension Styles Opens the Dimension Styles dialog box, which is used to create and modify
dimension styles, such as linestyle, tolerance, units.
Line Styles Activate line styles and sets line style modifiers. Used to define and modify
lines.
Multi-line Styles Opens the Multi-line Styles dialog box, which is used to create and modify
multi-line styles such as, linestyle of each line, spacing between.
Detailing Symbol Settings Sets the element symbology and bubble size for the detailing symbols.

Tags Creates, edits, and removes tag set definitions. Generates a tag report
template file that specifies the tag set and its member tags (plus any graphical
element attributes) on which to report. Generates report files using the
selected templates on tags attached to elements and on graphical element
attributes.
Text Styles Creates and modifies text styles. Sets text properties (width, height, font) and
saves as a style.
Information Used to review or modify information about an element(s), such as its type,
attributes, and geometry. Choose the tool and then click on an element.
Double-click on the element to open the dialog box. If you edit information
in this box and click Apply, it changes the element.

2/23/07 3-35
Settings Menu

Settings Menu

Tool Settings Toggles the display of the Tool Settings window, which is used to review and
adjust settings for the selected tool. The title bar shows the tool name.
Manage Opens the Select Settings window, which is used to select a settings group and
its associated drawing tool. Pre-saved groups of settings that are useful for a
particular type of drafting, e.g., ANSI Y14.5 geometric tolerancing.
AccuDraw Opens the AccuDraw Settings dialog box, which contains controls relevant to
the AccuDraw point input tool. AccuDraw is used to streamline the drawing
process by assisting in the rapid and accurate placement of data points while
placing and manipulating elements.
Color Table Opens the Color Table dialog box, which lets you browse and modify a “copy”
of the active color table — the color table that is currently attached to the
design file or, if none is attached, the default (internal) color table. After you
make any desired changes, you can attach this “copy” to the active design file,
or you can save it as a separate file for later attachment.
Color Books Opens the Color Book Editor dialog box, which is used to create and maintain
color books.
Database Control settings related to linkages between elements and rows in a non-
graphical database. Used to connect/disconnect to an external database from
within MicroStation PowerDraft. Provides a graphically intuitive means of
generating simple and complex queries and joining tables.
Design File Opens the DGN File Settings dialog box, which is used to change design file-
specific settings.
Drawing Scale Opens the Drawing Scale window, which is used to adjust drawing scale
settings
Level Level Manager is used to control level display, level symbology and level filters
for the active DGN file and attached references. The Level Manager also
allows you to attach and detach references.
Locks Opens the Locks dialog box, which sets locks and the Fence Selection Mode.

Snaps Opens the Snap Mode button bar, the buttons on which can be either clicked
to set the snap override or Shift-clicked to set the Snap Mode.
View Attributes Opens the View Attributes dialog box, which is used to set view attributes that
affect whether and how certain types and classes of elements are displayed and
whether certain drawing aids are displayed.Changes to the selected view take
effect immediately. If Apply To All is enabled, changes are applied to all views.

2/23/07 3-36
Settings Menu

Snaps Menu

You can open the Snaps menu from the icon on the prompt line at the bottom of the screen
or you use the Snap Mode button bar (Settings > Snaps > Button Bar).

More or less snaps will be shown on the Snaps menu depending on the current active drawing
tool. In other words, only the snaps that are available for the current tool display. To see the
maximum, activate the Place Line tool and then select snaps icon at bottom of screen. Or,
choose Snaps Button Bar from bottom screen.

Nearest Sets the snap override (or snap mode if the <Shift> key is pressed) to Nearest,
which causes a tentative point to snap to the point closest to the pointer on an
element.
Keypoint Sets the snap override (or snap mode if the <Shift> key is pressed) to
Keypoint, which causes a tentative point to snap to a keypoint on an element.
Midpoint Sets the snap override (or snap mode if the <Shift> key is pressed) to
Keypoint, which causes a tentative point to snap to a keypoint on an element.
Center Sets the snap override (or snap mode if the <Shift> key is pressed) to Center,
which causes a tentative point to snap to the center or centroid of an element.
Origin Sets the snap override (or snap mode if the <Shift> key is pressed) to Origin,
which causes a tentative point to snap to the origin of a cell.
Bisector Sets the snap override (or snap mode if the <Shift> key is pressed) to Bisector,
which causes a tentative point to snap to the midpoint of an entire element.
Intersection Sets the snap override (or snap mode if the <Shift> key is pressed) to
Intersection, which constrains an element to intersect another element with the
point of intersection at the first element's starting or ending point.
Tangent Sets the snap override (or snap mode if the <Shift> key is pressed) to Tangent,
which constrains an element to be tangent to another element.

2/23/07 3-37
Settings Menu

Tangent Point Sets the snap override (or snap mode if the <Shift> key is pressed) to Tangent
Point, which constrains an element to an element to be tangent to another
element with the point of tangency fixed.
Perpendicular Sets the snap override (or snap mode if the <Shift> key is pressed) to
Perpendicular, which constrains an element to be perpendicular to another
element.
Perp Point Sets the snap override (or snap mode if the <Shift> key is pressed) to
Perpendicular Point, which constrains an element to be perpendicular to
another element with the point at which the first element does or would
intersect the second element fixed.
Parallel Sets the snap override (or snap mode if the <Shift> key is pressed) to Parallel,
which constrains an element to be parallel to another element.
Point Through Sets the snap override (or snap mode if the <Shift> key is pressed) to Point
Through, which constrains an element to pass through a particular point on the
design plane.
Point On Sets the snap override (or snap mode if the <Shift> key is pressed) to Point
On, which constrains an element to begin or end on an element in the design
file.
Multi-snap1 Sets the snap mode to Multi-snap 1, Multi-snap 2 or Multi-snap 3. A multi-snap
Multi-snap2 represents a list of grouped snaps.
Multi-snap3

The main snaps are keypoint, center, intersection, origin, tangent, perpendicular and parallel.
The Snap Mode is where the diamond is on the menu. To change mode, hold down the shift
key and select another or double-click the icon of the new mode. The mode can be
overridden for one snap only.

Î To use snapping
1 Set the snap mode or method to what is desired, such as keypoint, nearest or other.
2 Move the cursor near the point to be snapped.
3 Press the left and right buttons on the mouse (or middle button if you are using a
three button mouse). See Workspace > Button Assignments (page 45) to change.
4 Watch the large cursor appear on correct point.
5 Left-click to accept, or right-click to reject.

AccuSnap

AccuSnap enhances many of the standard snap mode settings by displaying and automatically
snapping to the next tentative snap point as you move the pointer over an element. With
AccuSnap enabled, you very rarely need to enter a tentative snap point manually. All you need
do is move the cursor until the little yellow x symbol comes up near the snap point, and then
left click. Your point will be snapped automatically.

2/23/07 3-38
Settings Menu

AccuSnap Settings

To turn AccuSnap on or off, to turn automatic element highlight on or off, use the settings
which are found by clicking the snap icon on the lower right of the MicroStation PowerDraft
window and then select AccuSnap. Multi-snaps is used to set up groups of snaps and allows
AccuSnap to automatically snap to different snap modes such as all keypoints and all element
centers.

AccuSnap works in conjunction with the current Snap Mode setting and, for the most part, is
similar in operation to the manual method of tentative snap points - minus the button presses.
How close to an element or a keypoint that the pointer must be, before AccuSnap finds it, is
governed by the Locate Tolerance setting in the Input category of the Preferences dialog box.

2/23/07 3-39
Tools Menu

Tools Menu

The more common tool boxes are listed when you select Tools from the main menu. To see
all the tool boxes, click Tools > Tool Boxes.

Attributes Toggles the display of the Attributes tool box, which is used to
control the attributes (color, level, line weight, and line style) of
elements placed in the design. The controls in the Attributes tool
box do not affect existing elements.

Primary Tools Toggles the display of the Primary Tools tool box, which is used to
attach reference files, set up levels or turn on and off levels, as well
as toggle AccuDraw and Popset.

Standard Toggles the display of the Standard tool box, which contains icons
that enable quick access to commonly used pull-down menu items,
such as open file, new file, save, print, cut, copy, paste, undo, redo,
help.

Main Toggles the display of the Main tool box, which is open and docked
when you start MicroStation PowerDraft for the first time.

2/23/07 3-40
Tools Menu

Task Navigation Toggles the display of the Task Navigation tool box. If you are
viewing tasks in the Tasks dialog box, this menu item hides and
displays the Tasks dialog box.
Annotation Toggles the display of the Annotation tool box, which contains tool
boxes for labelling and annotating designs.

Auxiliary Coordinates Toggles the display of the ACS tool box, which contains tools used
to define and manipulate an auxiliary coordinate system (ACS).
Active in 3D.

B-spline Curves Toggles the display of the Curves task, which contains tools used to
manipulate B-spline curves.

Common Tools Toggles the display of the Common Tools tool box.

Database Toggles the display of the Database tool box, which contains tools
for attaching and detaching a database.

Design History Opens the Design History tool box., which contains tools to record
changes in history file, restore elements or fence from history, show
design history, and initialize design history.

Digital Signatures Opens the Digital Signatures tool box, which is the main interface
to the Digital Signatures functionality.

Dimensioning Toggles the display of the Dimension Tools tool frame, which
contains tool boxes to create linear, angular, radial and
miscellaneous dimensions.

Drop Toggles the display of the Drop tool box, which contains tools to
break up complex elements into simpler components, and to
remove association points between elements.

2/23/07 3-41
Tools Menu

Engineering Links Toggles the display of the Engineering Links tool box.tools, which
contains tools for linking to and managing remote data.

Google Earth Toggles the display of the Google Earth tool box, which contains
tools for interacting with Google Earth.

Isometric Toggles the display of the Isometric tool box, which contains tools
to represent 3D relationships in 2D design.

Multi-line Joints Toggles the display of the Multi-line Joints tool box, which contains
tools used to construct joints at multi-line intersections, construct
cuts (breaks) in multi-lines, and modify multi-line components.

Raster Toggles the display of the main Raster tool box, which contains
tools for displaying and controlling raster files.

Redline Toggles the display of the Redline tool box, which contains tools to
work with redline files.

Reference Toggles the display of the References task, which contains tools to
manipulate attached reference files, to attach/detach referenced
models to the active model and to control the positioning, scaling,
clipping, and orientation of attached referenced models.

Rendering Tools Toggles the display of the Rendering Tools tool box, which contains
the Render view control used to request on screen rendering, or ray
tracing.

Tags Toggles the display of the Tags task, which contains tools to attach,
edit, change, review, and delete element tags.

2/23/07 3-42
Utilities Menu

View Control Toggles the display of the View Control tool box, which is used to
manipulate views in the active DGN file.

Tool Boxes Opens the Tool Boxes dialog box, which lists all individual tool
boxes.

Close Tool Boxes Closes all tool boxes.

Utilities Menu

Here are a number of utilities that are useful. Key-in allows you to key-in commands and
distances rather than graphic selections; Cell Selector is very useful for placing cells; Render

2/23/07 3-43
Utilities Menu

for shading a 3D model; Install Fonts to bring True Type or other outside fonts into
MicroStation/PowerDraft and more.

Key-in Opens the Key-in window, which is used to browse, construct, and enter
key-ins.
3D Warehouse Opens the 3D Warehouse dialog box, which lets you choose a SketchUp
model (.skp file) to open in MicroStation, in read-only mode.
Connect Web Browser Opens your default Web browser, which is used to browse the World Wide
Web.
Cell Selector If no cell library is loaded, selecting this menu item opens the Select Cell
Library to Load dialog box.
Image Controls image settings and display.

Render Renders a view(s) as a Hidden line, Filled hidden line, or Smooth.

Auxiliary Coordinates Opens the Auxiliary Coordinates dialog box, which is used to name, save,
attach, delete, or import an auxiliary coordinate system (ACS) and to select
ACS tools.
Saved Views Opens the Saved Views dialog box, which is used to name, save, attach, and
delete views. Saving a view allows you to quickly recall a view with specific
attributes.
Named Groups Opens the Named Groups dialog box, which is used to create and modify
named groups and hierarchies of named groups.
Design History Controls initialize, deletion, revisions and management of design history.

Standards Checker Opens the Standards Checker dialog box, which is used to run standards
checks. These checks compare information in your DGN file against
standards that you have established.
Packager Opens the Create Package wizard, which is used to step you through the
process of creating a project package.
Archive Opens the Archive dialog box, which is used to open existing archive files
and extract their contents and view and verify digital signatures.
Install Fonts Opens the Font Installer dialog box, which is used to insert fonts into font
libraries and to rename and renumber fonts.
Data Cleanup Opens the Design File Cleanup dialog box, which is used to identify
duplicate elements, overlapping elements and/or gaps between elements in
the active design file.
Dimension Audit Opens the Dimension Audit dialog box, which is used to search all the
dimensions in the active model and report any problems.
DWG Scans a DWG and/or DXF file, and generates a report on the number of
objects audited and the number of errors found. Also used to select a DWG
file for recovery.
License Management Opens the License Management Tool dialog box, which is used to check out
application and program licenses under concurrent license control of the
SELECT Server License Manager to systems that are not continually
connected to a network with access to SELECT Server.

2/23/07 3-44
Workspace Menu

Macro Displays a list of macros available in the currently loaded Visual Basic
projects. Allows for the creation of Visual Basic applications and macros
and MicroStation BASIC macros. Provides means to run, edit, or debug
MicroStation BASIC macros.
MDL Applications Opens the MDL dialog box, which is used to load, unload, and monitor the
sizes and memory use of Development Language (MDL) applications.

MicroStation PowerDraft automatically picks up all truetype and AutoCAD shx fonts (if
available) and installs them with MicroStation PowerDraft.

Workspace Menu

Allows you to select from a number of different options for your setup. You may not need to
go here and the rest of this book is based on the way MicroStation PowerDraft installs
without changes.

Preferences Opens the Preferences dialog box, which is used to set user preferences —
settings that control how MicroStation PowerDraft operates.
Configuration Opens the Configuration dialog box, which is used to edit, define, save, and
delete configuration variables.
Customize Opens the Customize dialog box, which is used to add and manage
templates; add custom tool boxes, tools, and tasks; and customize menus.
Function Keys Opens the Function Keys dialog box, which is used to open, edit, and save
function key menus. A function key menu is a file that contains keyboard
function key definitions — assignments of actions to function keys, By
default, F1 is help, etc.
Button Assignments Opens the Button Assignments dialog box, which is used to assign
MicroStation key-ins and to add key combinations to logical buttons, thus
creating additional button assignments. Used to change the function of
mouse or digitizer buttons. Go here if you have a three-button mouse.
Change the center button to function as the snap button, the left to be the
data button and the right to be used as the reset button. You must click in
the wide bar in the dialog to make it work.
About Workspace Opens a window in which information is displayed about the active
workspace and its components and the active workmode.

2/23/07 3-45
Window Menu

Window Menu

Views Opens the View Groups window from which you can select a
different view group, manage view groups or open or close multiple
view windows in tandem. By default, it is docked at the bottom left
of your screen above the status bar. Let’s you open or close a view
window. The numbered items in the submenu are window numbers.
The windows marked on are open.
Cascade Stacks view windows in numerical order with the lowest numbered
window entirely visible and the title bar of each remaining window
visible.
Tile Tiles view windows between all docked windows and dialog boxes
near the edges of the MicroStation PowerDraft window. This is a
quick way to clean up the screen. Divides up the screen evenly
between all views.
Arrange Resizes all view windows so that they fit tightly within the available
space without overlapping. Arrange attempts to preserve the view
windows' original size and positional relationships as much as
possible. Takes up available screen space with open Windows.
Scroll Bars Toggles display of scroll bars and a view control bar in the borders of
view windows.
Task Navigation in Views Causes a Task Navigation tool box to be docked to each view
window. This enables you to activate different tasks in different
views. If Task Navigation in Views is off (the default), only one task
is active at a given time.
View ToolBox Causes a View Control tool box to be docked in the open view
windows. This enables you to activate different view controls in
different views.

2/23/07 3-46
Help Menu

Help Menu

Contents Opens the Help window to display MicroStation PowerDraft’s

Table of Contents.
Tool Index Opens the Tool Index window in the online help system. When
you select a tool, the associated tool documentation displays in the
Help window. Additionally, the tool can be invoked in MicroStation
PowerDraft by clicking the Use It icon in the Help window.
Tool Tips If on, positioning the pointer over a tool icon displays a tool tip,
which is a yellow rectangle with text that provides the name of the
tool.
Tracking If on, help for each newly selected tool or view control is
automatically displayed in the Help window. As the tool or view
control changes, the help changes.
Key-in Browser Opens the Key-in window, which is the same window that opens
when you choose Utilities > Key-in. If the Key-in window is
docked when you choose this menu item, it is undocked and
simultaneously expanded to its full size.
Bentley Institute Training Opens your Web browser to the Bentley Institute website.

Online Support Opens your Web browser to a URL from which you can access
Bentley’s SELECTservices KnowledgeBase.
Discussion Groups Opens a Web page from which you can access Bentley discussion
groups.
About MicroStation PowerDraft Opens the About MicroStation PowerDraft window in which
information about the product is displayed.

Summary
We are now able to open and create drawing files, navigate the menus, add, manipulate and
edit elements and we have an overview familiarity with the entire menu structure. From this
point, we will slow down and go more deeply into the most commonly used functions and
will gain more hands-on experience.

2/23/07 3-47
MicroStation PowerDraft for Students Copyright © 2007 Bentley Systems, Incorporated Do Not Duplicate

2/23/07 3-48
4 Input of Precise Geometric Data

A very useful feature of MicroStation PowerDraft for precise technical drawing is the key in
of coordinate data.

Whenever MicroStation PowerDraft calls for entry of coordinate data, the data may be
entered:
• via the mouse and graphic cursor
• via coordinates entered from the keyboard

There are two ways to key in coordinate data from the keyboard:
• using key-in commands
• using AccuDraw

Lesson 7: Key in of Coordinate Data

Using Key-In Commands

MicroStation PowerDraft allows you to input data point values with the keyboard instead of
the mouse. This means that you can create elements that are a certain size, or a certain
distance from another element. You can also use keyed-in input to specify the exact location
that you want an element to be placed. To use key-ins, select Utilities > Key-in to display the
Key-in dialog box.

2/23/07 4-49
Lesson 7: Key in of Coordinate Data

The xy= Key-in Command

MicroStation PowerDraft allows you to place data points by specifying their absolute
coordinate positions, i.e., relative to the global origin. This feature is most frequently used to
indicate the exact position for an element’s origin point. The key-in command that you use to
specify coordinate position is xy=. The format for this key-in is:
xy=x coordinate,y coordinate

The values for the X and Y coordinates should be specified in working units format, and they
can be either a positive or negative value.

You can use this key-in to create a line with initial point at the global origin of the design
plane. Here are the steps needed to create this line:
1 Select the Place SmartLine tool.
2 Key in xy=0,0<enter> in the Input field of the Key-in utility.
3 Complete the command by entering a data point to visually place the line’s end point
or enter another xy= key-in to specify the exact coordinates for the line’s end point.

) The xy= key-in uses the drawing coordinate system so the coordinates you enter are always
placed relative to the global origin.

The dx= and dl= Key-in Commands

You can use the dx= and dl= key-in commands to place a data point at an offset distance
from a previous data point or current tentative point. The format for each of these key-ins is:
dx=delta x,delta y
dl=delta x,delta y

The delta values for X and Y are entered in working units format and they can be positive or
negative.

The only difference between these two key-ins is that dx= uses the view coordinate system
and dl= uses the drawing coordinate system. Unless you are working in a rotated view, you
will not see a difference between these two key-ins.

You can use these key-ins to create a line that is 5 feet in length, and its origin point is 3 feet
to the right of an existing element. Here are the steps needed to create this line:
1 Select the Place SmartLine tool.
2 Use the tentative button to snap to the right side of the existing element, but don’t
accept the tentative.
3 Key in dx=3,0. This indicates that you want the origin point of the line to be shifted
3 feet to the right of the current tentative point.

2/23/07 4-50
Lesson 7: Key in of Coordinate Data

4 Key in dx=5,0. This indicates that the end point for the line is 5 feet from the
previous data point.

The di= Key-in Command

The di= key-in allows you to place a data point in polar coordinates by referencing a previous
data point or a current tentative point. Here you specify the distance and the angular direction
of the next data point. The format for this key-in is:
di=distance, direction (angle)

Distance is entered in working units. Valid angle values range from 0 to 360 measured
counterclockwise from positive x. They can be whole numbers or decimal values down to one
ten-thousandth of a degree.

You can use this key-in to create a rectangle that is exactly 2 feet wide and 3 feet high. Here
are the steps needed to create this rectangle:
1 Select the Place SmartLine tool.
2 Enter the origin point for the rectangle. You might do this by visually selecting a data
point, entering xy= to specify the exact coordinates, or by entering dx= to offset
from the previous data point or current tentative point.
3 Key in the following to draw the rectangle:
di=2,0
di=3,90
di=2,180
di=3,270

) This key-in uses the view coordinate system, so the angle is always relative to the screen
orientation, not the file’s axes.

Key-In of Coordinate Data Using AccuDraw

AccuDraw can be opened by clicking on the AccuDraw icon. In a 2D design file, this opens a
coordinate dialog box showing X and Y coordinates. As an example of how to operate
AccuDraw, do the following:
1 Start a line anywhere. Move your cursor so the line is horizontal.
The line highlights to indicate that it is horizontal. Vertical works the same.

2/23/07 4-51
Lesson 7: Key in of Coordinate Data

2 Move the cursor horizontally to the right and then type 5 (don’t type <enter>).
AccuDraw makes the line 5 units in “X.” Left click the mouse to set the line.
3 Move cursor straight up and then type 3. The line is 3 units in “Y.” Click the mouse
to set the line.
4 Touch the space bar to switch between xy mode and polar coordinate mode in
AccuDraw. In the polar coordinate mode you enter distance and angle in the
coordinate dialog box.

5 When drawing a line, press <Enter> to set Smart Lock. Smart Lock locks the
direction in either X or Y depending on the direction at the time you press <Enter>.
6 To start a line at a known distance from a point, tentative-snap to the known point,
but don’t accept. Press the letter <O> on the keyboard. Move the cursor using soft
lock as explained in step 1. Type the distance from the known point and then left-
click to set the beginning of new line.

A useful feature of AccuDraw is an enhancement of the previous key-in command. With

input focus on AccuDraw, press the <P> key. Note the dialog box says x,y= with a box to
input a number. Here you type the coordinate pair except that AccuDraw has already typed
the letters “x y and =” for you. Press <Enter> after entering the two coordinates.

If you practice these steps you will find that AccuDraw is the easiest way to enter precise
coordinates. We will work with AccuDraw more in later exercises.

Exercise 2: Stepped-Shaft

You will use key-in of coordinate data to create the design file for the following shaft:

2/23/07 4-52
Lesson 7: Key in of Coordinate Data

1 Select File > New and in the New dialog box, select seed2D.dgn as the seed file. In
the File name field, enter your first.
2 Select Settings > Design File. In the DGN File Settings dialog box Working Units
category, set the Master Unit to Inches.
3 While still in DGN File Settings, set the Format to MU to use Master Units.
4 Set the coordinate Accuracy to 0.123. Coordinates will display as 1.250 inches. Click
OK to close the DGN File Settings dialog box.
5 Turn on AccuDraw, if it is not already on, by clicking on the AccuDraw icon on the
Primary tool bar.
6 From the Task Navigation tool bar, select the Place Block tool. Make sure Input
Focus is on AccuDraw (click on AccuDraw dialog box). To place first rectangle with
corner at 0,0: press the <P> key and type in 0,0 <enter>.

7 Then, move the cursor to the right of the first point and type 4 (without typing
<enter>). Then, move the cursor straight up and type 4 (without typing <enter>).
Finally, accept by pressing the left mouse button.
8 Fit View to see the 4 x 4 inch rectangle (block).
9 To place the second rectangle, select the Place Block tool and move the cursor to the
lower right corner of the first rectangle until a small x appears. With AccuDraw
having the Input Focus, press the letter <O> for Origin to set the AccuDraw origin.
The AccuDraw compass should now be located at the lower right corner of the first
rectangle.
10 Move the mouse up along the rectangle’s right side and type 1 and then press the data
button.
This places the first point of the second rectangle.
11 Move the cursor to the right and type 6 (don’t press <Enter>) for the width of
second rectangle. Then, move the cursor up and type 2 for the height of the second
rectangle. Press the data button to complete the second rectangle.
12 Fit View to see the first and second rectangles.
13 From the Modify tool box, select the Construct Chamfer
tool. In the tool settings, edit both distances to .125 (1/8").
14 Click on right hand vertical edge of 6 x 2 rectangle. Then,
click above on the horizontal edge of the same rectangle.
Accept. One corner has been chamfered to 1/8". Click anywhere on the view to
accept. Repeat on the lower right corner of the same rectangle.
15 Draw the vertical line at the chamfer by using the Place SmartLine tool and snapping
(using default keypoint snap) at top and bottom.

2/23/07 4-53
Lesson 7: Key in of Coordinate Data

) Remember the sequence for manual snapping. First, take the cursor near the point to
be snapped. It is usually best to put it right on a line near, but not on, the snap point.
In this case, on the horizontal line near, but not on, the chamfer point. Then, press
both buttons on your mouse at the same time. Your computer may be set to snap
with the middle button of your mouse. A huge cursor appears. MicroStation
PowerDraft is asking you if it snapped to the right point. If OK, press the data
button to accept the tentative point. If not OK, press reset and then try again. If
AccuSnap is on, you will see the element highlight and the little symbol by the point
with a cross. Just left-click to accept the AccuSnap. Much easier!
16 Reset to disconnect the line.
17 From the Active Line Style drop-down menu (part of Attribute tool box, usually
docked at the top of the screen), choose the Center style.
18 Place the centerline by snapping to the center of the vertical edge of the rectangles.
Then use the Modify Element tool to extend the line to make the centerline as long as
you like.
19 Pan your view to the right to make room for the end-view circles. You pan by using
the Pan icon in the View Control tool bar.
20 Change the linestyle back to solid.
21 Draw the small outer circle by locating the center by snapping to the centerline, and
in the Place Circle tool settings window, set the diameter to 2 inches.
22 Draw a large circle similarly, with a diameter of 4 inches.
23 In the Place Circle tool settings window, change Diameter to Radius. Draw the small
circle representing the chamfer by placing the center of the small circle as in step 21
and then using AccuDraw to place a point on the circle by dragging your cursor
horizontally to the right and typing 0.875.
24 Select Element > Text. Set the text height and width to 0.200.
25 From the Navigation tool box, open the Dimensioning tool box and select the
Dimension Element tool. Click on left the vertical line on the shaft. Drag the
dimension out and click.
26 For the 10" dimension, select the Dimension Linear tool. This is a special sequence:
Snap to the corner of the shaft. Move the cursor straight to the far right end and click
to set the length. Then, move the cursor straight up to set the extension lines. Accept
the 10" dimension.
27 Reset.
28 Select Dimension Element again. Identify the 2" circle. Accept the dimension and
place it. Identify the .875" radius circle. Accept.
If you want a horizontal leg on your leader, select Element > Dimension Styles. In
the Dimension Styles dialog box, go to Advanced > General > Placement >
Location > Manual. Enter another data point for the leader, then Reset.

2/23/07 4-54
Summary

29 To place a center mark for the circles, use the Dimension Element tool and then click
on the circle. In the tool settings, turn on Center Mark.

Summary
You have now completed a medium complexity mechanical drawing including chamfering,
key-in of precise coordinates and dimensioning!

Congratulations!

We will go more deeply into dimensioning in a later chapter. But, you are already prepared for
schematics and normal mechanical drafting with your MicroStation PowerDraft.

2/23/07 4-55
MicroStation PowerDraft for Students Copyright © 2007 Bentley Systems, Incorporated Do Not Duplicate

2/23/07 4-56
5 Working with Groups

There will be times when you will want to perform the same operation on several elements.
This can be done by repeating the operation for each individual element, or by temporarily
grouping the elements and performing the operation once for the entire group. This chapter
covers two different ways that you can create these temporary groupings in MicroStation
PowerDraft.

Lesson 8: Fences
One way that you can group elements in your design file is to place a fence around them.
Once a fence has been placed, you can move, copy, scale, rotate, delete, or change the
attributes of elements that are in the fence. There are three important things that you need to
remember about fences:
1 A fence is a temporary structure that you can use to group elements. Place a fence by
selecting the Place Fence tool. To turn a fence off, click the same tool.
2 Only one fence can exist in your design file at any given time.
3 MicroStation PowerDraft fences can be in one of six different modes. These modes
determine which elements are considered to be fenced. You can set the fence mode
when you create the fence, when you perform any operation that uses the fence, or at
any time from the Locks dialog box. The three most common fence modes are:

Inside Only elements that lie entirely inside the fence will be affected.

Overlap Elements that lie inside or elements that overlap any portion of the fence will be
affected.

Clip Similar to the Overlap mode, it too affects elements that lie inside the fence or ones
that overlap any portion of the fence. The difference is that Clip mode actually
breaks overlapping elements at the points where they touch the fence. So only the
portions of the broken elements that lie inside the fence are affected.

2/23/07 5-57
Fence Tool Box

Fence Tool Box

You can use the tools on the Fence tool bar to place, modify, or move a fence. There is also a
tool that allows you to delete the elements in the fence.

Three Most Common Fence Tools

Place Fence

You can use this tool to place a rectangular fence. When you activate this tool, you will be
prompted to supply two data points. These data points will be the diagonal vertices of your
fence.

Delete Fence Contents

Unlike the other tools on this tool box, this tool affects the elements within the fence. When
you select this tool, you will be prompted to confirm the deletion with a data point. A data
point anywhere in an open view confirms this action and deletes the contents of the fence.
Remember that the current fence mode determines which elements will be deleted.

Manipulate Fence Contents

Essentially, any modification that can be done to elements can also be done to fenced groups.

For example, select the Place Fence tool from the Fence tool box. Click on the corners of a
fence so as to include the circles of previous exercise. Then select the Change Element
Attributes tool. Turn on Use Fence in tool settings, then click on “color” box, then click on
the colored box and hold down the mouse button to expand out the color palette. Go to a
bright color and drop the button. Accept. All of the circles will change color.

This same approach changes level, linestyle or any attribute.

Or, we could delete the contents of the fence or move the contents or copy the contents, etc.
Note also that several manipulation tools can be found in the Manipulate Fence Contents
icon which is the third one in on the Place Fence tool bar. Click on Operation to see the
functions that can be done. Other tools in the Fence tool box provide for non-rectangular
fences which can be very useful in certain circumstances.

2/23/07 5-58
Lesson 9: Element Selection Tool

Lesson 9: Element Selection Tool

Another way to temporarily group elements is to use the Element Selection tool found on the
Main tool box. This tool allows you to select a single element, a group of elements, or all
elements that lie within a specified area. When an element or group of elements has been
selected with this tool, handles display around the element(s). The element(s) can now be
changed or manipulated the same way you would change or manipulate any single element.

Î To select a single element

1 Select the Element Selection tool from the Main tool box.
2 Identify the desired element. The element now displays with handles indicating that it
is selected.

Î To select multiple elements

1 Select the Element Selection tool from the Main tool box.
2 Press and hold the <Ctrl> key on the keyboard and identify the desired element.
Continue this process until all the desired elements are selected.

) In the Element Selection tool, the sequence <Ctrl> key + data button is a toggle. If
you issue this sequence on an element that has already been selected, you will un-
select it.

Î To select all the elements within a specified area

1 Select the Element Selection tool from the Main tool box.
2 Position the screen cursor at one corner of the area that you want to select, press and
hold the data button, drag the dynamic fence to the opposite corner of the area, and
release the data button. All elements that lie completely inside this area now display
with handles indicating that they are selected.

) If you hold the <Ctrl> and the <Shift> keys while you are dragging across elements,
any element that lies inside or overlaps the defined area will be selected.

2/23/07 5-59
Lesson 9: Element Selection Tool

Exercise 3: Sprinkler Protector

In this exercise you will create the Plan and Section view of the sprinkler protector.

Plan View

Section View

1 Select File > New.

2 In the New dialog box, enter any file name (for example, EXER3) without pressing
<Enter>.
3 Click Browse and in the Select Seed File dialog box, double-click seed2d.dgn and
click Open.
4 In the New dialog box, click Save to close the dialog.
You will see the name you selected for the new file and you will have it set up with
the seed2d.dgn seed file.
5 Select Settings > Design File and in the DGN File Settings dialog box, select the
Working Units category. Set Master Units to Inches with the label ". Set Sub Unit to
Mils.
6 In the DGN File Settings dialog box Grid category, turn off Grid Lock.
You can also turn off the Grid Lock in the View Attributes dialog box. You open this
dialog box by clicking the View Attributes icon at the top left of the screen.

2/23/07 5-60
Lesson 9: Element Selection Tool

Î To create the Plan View of the sprinkler protector

1 Using the Place Block and Place Circle tools, draw the rectangle and two concentric
circles of the plan view using AccuDraw. Place the circle center by changing the Snap
to Center method and then snap to an edge of the Rectangle.
2 Use Fit View to see the entire rectangle.

Î To create the Section View of the spring protector

You will draw one half of the Section View and mirror-copy it to create the other half.
1 Select the Place SmartLine tool, then space the Section View down from the Plan
View.
2 With the Input Focus on AccuDraw, move the cursor to the lower left corner of the
rectangle until the yellow “x” is on the corner. Then type the letter <O>. Move
straight down, with AccuDraw indexed to vertical (you see the heavy white line) to
make the first point of the section. Click the data button. Then, move to the right and
type 6, but don’t press <Enter>. Then, move up and type 2 then click. Press the
letter <V> to reorient to the view. Now, move down, press 6, then click. Move left,
press <Enter> to lock to x, then snap to first point. Close the section by snapping
again to upper left point.
3 Draw the remainder of the left half of section. Place a few points and three-sided
polygons to represent the concrete. (We will learn about automatic patterning later.)
4 Select the Place Fence tool to make the right side of the section.
5 Move the cursor a couple of inches above and to left of the Section and click.
6 Move the cursor a couple of inches below and to the right and click.
You will see a colored rectangle surrounding your left half section.
7 From the Modify tool box, choose the Mirror tool. In the
tool settings window, turn on Use Fence. Turn on Make
Copy, otherwise it will mirror-image your geometry and
you will lose the original.
The mirror-image tool is now expecting you to accept the
contents of the fence and to simultaneously supply it with
the line about which it will mirror.
8 In the Mirror tool settings window set the Mirror About option to Vertical and then
click at the exact center of the sprinkler protector plan.

) Use the Keypoint snap and AccuSnap to the center of the horizontal line in top view.
You will see your geometry copied and mirrored to create the right side of the
section. You will see another copy also as MicroStation PowerDraft assumes you
want to continue. Just hit Reset to leave your original plus one copy.
9 Finish the remainder of the drawing as in Exercise 2: Stepped-Shaft (page 52).

2/23/07 5-61
Review

Review
You can now manipulate groups of elements as well as operating on individual elements.

This is a good point to review what you have learned since you are already capable of
preparing fairly complex working drawings using MicroStation PowerDraft.

Here are the main points of what you have covered:

File Navigation

Create a new file using a seed file to get it started or Open an existing file.

Menus

By now you have settled on the way you like to do it. Maybe you like click-click. Or, if you
learned on a Macintosh, you like click-drag.

If you are keyboard oriented, you have probably already begun to memorize some power keys.
If you really like the keyboard, check the list of abbreviated key-in commands in the Appendix
(page 163). You can use the Key-in Browser found on the Utilities menu to learn the longer
key-ins for other commands. Also, see Workspace > Function Keys (page 45). You can even
set keystrokes for each command. For example, if Input Focus is on “Home” (Press <Esc>
first to be sure focus is on Home), type <Q> then <1> to be in Place SmartLine. Or, <E>
then <1> to be in Place Circle.

Master-Sub Working Units and Grids

Go to Settings> Design File and in the DGN File Settings dialog box, use the Working Units
category to set up working units for any new design file. Use the Grids category to set up
grids.

Main and Task Navigator tool boxes

You always want these tool boxes displayed.

Panning and View Control in middle of a command

Pan the drawing using the Pan view control, using the scroll bars (Workspace > Preferences >
View Options, turn on Scroll Bars on View Windows) or by pressing <Shift> and mouse
button at the same time with cursor near center of screen. Move your hand right, left, up, or

2/23/07 5-62
Review

down to pan. After panning or any view control, you can return to the command you were in
by right clicking the mouse.

Data-Reset-Tentative

If you have three-button mouse, press the left button to select a command, accept a point or
enter a data point. Press the right button to reset to the beginning of continuous operation
like entering lines or press Reset to “reject” a selection. Press the middle button to enter a
tentative point. If snap lock is on, pressing the middle button manually snaps according to
mode set in the Snap menu. See AccuSnap (page 63).

AccuSnap

Automatically snaps to the highlighted point and object.

Accept/Reject

Many commands prompt you to Accept/Reject the selection you have made. For example, if
you want to delete the contents of a fence, MicroStation PowerDraft asks you to Accept/
Reject fence contents. You must answer that question before continuing. Use the left button
to accept and the right button to reject. If you reject, you are ready to try again.

Tool Settings Window

The tool settings window opens automatically whenever you select a tool. Always look at it
after selecting a tool as it gives you the options for that tool.

Command and Prompt

Remember to watch the Command and Prompt at the bottom of the screen. You may not be
where you thought!

Manipulating and Modifying Element

The tools for changing elements that are already on the drawing are found in three tool boxes:
• Manipulate (copy, move, mirror)
• Change Element Attributes
• Modify (delete partial, scale, extend two lines)

2/23/07 5-63
Review

You can also use the Delete Element tool.

To find a tool, place the cursor over the first tool and press and hold down the data button
while dragging the cursor. Watch the name of each tool appear.

Input Focus

Remember that, like any Windows program, the input focus must be on the dialog box into
which you want to enter data. To change focus to a dialog box, click on it. To change input
focus to Home, press the <Esc> key.

Positional Mapping

Positional keyboard navigation is a technique that utilizes a position-mapped keyboard.

Position mapping is the mapping of keyboard zones to logical collections of controls in the
user interface. MicroStation PowerDraft position maps your keyboard by default. You can
show or hide the keyboard mapping through the Preferences dialog box (Workspaces >
Preferences), Position Mapping category.

AccuDraw

To start AccuDraw, click on the icon in Primary Tools tool box. With input focus on the
AccuDraw dialog box, here are the most popular short cuts:
1 While in the Place Line tool, click a point, then, move your hand in the direction you
want the next point, key in the distance and click again to accept. If you see the heavy
white line (or index), you know you are going in the x or y direction. This works for
drawing a line, for the radius of an arc, for moving an element, or really any
command that requires a distance or coordinate change.
2 To enter an absolute coordinate, type <P> and the coordinate pair separated by a
comma, followed by an <Enter>.
3 If using AccuDraw to enter two coordinate changes (like a line on an angle or a
rectangle), move the cursor in the first direction until you see the heavy line, enter the
first number without clicking the mouse or pressing <Enter>. Then, move the
cursor in the second direction, enter the second number and then click the mouse.
4 If you want to start a line offset from a known point, tentative snap to the known
point without accepting. Then, type in the letter <O> (representing Origin). Now, do
as described in 1 or 3 to set the start of the line.

2/23/07 5-64
Review

Company Standard Seed File

One of the first places for any company to standardize is with their seed files. To set up a
company standard seed file, just start a new file with Seed2D.dgn, modify it to suit and then
save the result in the path of seed files (See File > New > Browse to locate). From then on,
you would use your company’s standard seed file to start all new files.

2/23/07 5-65
MicroStation PowerDraft for Students Copyright © 2007 Bentley Systems, Incorporated Do Not Duplicate

2/23/07 5-66
6 Using Levels

A design file consists of any number of levels. A level is a way of separating CAD data much
in the same way as a clear sheet of acetate is used by an architect on “pindrafting.” For
example, you might put your floor plan drawing on level 1, your dimensions on level 10 and
furniture symbols on level 20. If you turn on all levels, you see the floor plan, dimensions and
furniture. Or, if you turn off level 10 and 20 you will only see the floor plan.

Using levels allows you to work on only one part of a design at a time without the clutter of
other parts. It also facilitates communication. You might turn off the furniture when sending
the file to an electrical designer who only needs the floor plan.

Also, levels facilitate plotting the actual working drawings. From one file you can make a
dimensioned drawing for the framer or a drawing with the floor plan and furniture for the
interior designer, just by turning levels on and off.

In this chapter you will learn the details of using levels in MicroStation PowerDraft. Probably
the nicest feature about MicroStation PowerDraft’s level setup is that each of the unlimited
number of levels can be turned on or off independently. Another nice feature is that each of
the eight design views can be set up to display a different combination of levels.

Lesson 10: Levels

Level Manager dialog box

The Level Manager dialog box is used to create and delete levels and optionally to set the
color, linestyle and lineweight for that level if using ByLevel option for those attribute.

2/23/07 6-67
Lesson 10: Levels

The Level Manager dialog box opens when you select Settings > Level > Manager or when
you click the Level Manager icon on the Primary Tools tool box.

Î To create a level
1 In the Level Manager dialog box, select Levels > New.
A new level is added to the level list in the Level Manager dialog box.
2 Click on any item that you wish to change. If you want to rename the New Level
entry under Name, type in the new name you wish for that level.
3 Click on a heading to have the list sort in that order.

Level Display dialog box

Even though there are any number of levels that you can draw on, only one level is considered
active at any given time. Any elements that you create are placed in the active level. The Level
Display settings box can be used to set the active level and to turn levels on and off in the
individual views.

You can display this settings box by selecting Settings > Levels > Level Display (or click the
Level Display icon in the Primary Tools tool bar). The green highlighted level in the list box is
currently the active level. The darkened levels indicate that they are turned on for this
particular view.

) Changing the active level only affects elements that are created from that point on. It does not
affect any existing elements.

2/23/07 6-68
Lesson 11: Moving Elements Between Levels

Î To set the active level

1 From the Settings menu, select the Levels > Display to open the Level Display dialog
box (or from the Primary Tools tool box, click the icon).
2 In the dialog box, position the cursor on the level you want to make active, and
double click the data button. The level highlights in green.

Î To turn levels on or off

1 In the Level Display dialog box, single click any level that is not the active level. The
active level is always on.
2 To turn off a level, single click it.
3 Position the cursor on the number for the level you want to turn on or off, and single
tap the data button. This toggles the level off if it was on or on if it was off. You can
also press and hold the data button and drag across several numbers to turn on or off
multiple levels.

Lesson 11: Moving Elements Between Levels

After elements have been added to your drawing, you may want to move an element or a
group of elements from the original level on which the elements were entered to some new
level.

2/23/07 6-69
Lesson 12: Level Locks

To do that, use the Change Elements Attributes tool. In the

tool settings window that opens, turn on the Level check box.
Then, select the new level name. Finally, identify the elements
that you want changed by clicking on them and then
accepting.

You might try this by changing all of the dimensions of the

previous exercise to a named level. Then select Settings >
Levels > Display and click on the named level. When you
click All, the dimensions disappear.

Remember, when you change any attribute, including level,

you are also changing the attribute for elements to be subsequently entered.

Remember to check the Element Attributes after using Change Element Attribute to be sure
you are setup as you want.

Lesson 12: Level Locks

You can use the Level Lock feature to restrict element manipulations, so that only elements
on the current active level are affected by certain manipulation tools. Trying to select an
element on any other level for manipulation when this lock is on, causes the error message
Element Not Found to appear in the status bar.

By default, the Level Lock is off. You can turn this lock on through the Locks settings box. To
display this settings box, select the Locks item from the Settings menu, and then select Full.
Click the data button in the check box beside Level Lock to turn on this lock.

2/23/07 6-70
7 Using Multi-lines

The multi-line feature of MicroStation PowerDraft is very useful for many types of design
and drafting, but especially for drawing floor plans. MicroStation PowerDraft will
automatically “mitre” the corners, join lines and cap multi-lines as you direct it.

Lesson 13: Multi-line Set-up

To set up your multi-lines, select Element > Multi-line Styles. The Multi-line Styles dialog box
opens.

Profile/End Caps and Joints tabs Contains controls to change one of the lines, the caps or the way joints are
handled.

Offset Sets the distance of each line relative to the “centerline” of the multi-line.

Level, Color, … Sets the attributes of each line in the multi-line independent of the others.
Click on the value and change it to what you want.

Fill Color If on, the entire area of the multi-line is filled with the selected color.

Picture at bottom Shows how your multi-line will look.

2/23/07 7-71
Lesson 14: Placing Multi-Lines

As an example, you probably found multi-line setup for the default with three lines. Two lines
are solid, spaced 0:3" above and below the centerline which is at 0:0.

That’s the essence of setting up multi-lines. You can name a style and save it for later use. You
can have an unlimited number of multi-line styles.

From the Settings menu, select Manage. In the Group section of the Select Settings dialog
box that opens, select Multi-line Styles. In the Component section (bottom half of the dialog
box), the list of included standardized styles displays Click on any one and then try placing it
with the Place Multi-line tool.

Lesson 14: Placing Multi-Lines

Î To place a multi-line
1 Select the Place Multi-line tool. It is the third tool on the Linear tool box.
2 In the status bar, the message Place Multi-Line > Enter First Point displays.
3 Move your cursor to the first point of the centerline of the multi-line and click. Then,
drag the multi-line to the second point and click.
The tool settings window gives you the option of placing by Work line, Center,
Maximum or Minimum.
4 Move at an angle and see the multi-line mitre the corner.

Lesson 15: Cleaning up Multi-line Joints

After placing some arbitrary multi-lines in your drawing, experiment with cleaning up the
joints. From the Tools menu, choose Multi-Line Joints. In the Multi-line Joints tool box, select
the tools one-by-one and try them on your sample multi-lines.

2/23/07 7-72
Lesson 15: Cleaning up Multi-line Joints

Î To clean up a multi-line joint

1 Select one the Multi-line Joint tools.
2 Identify the first multi-line at the joint.
3 Identify the second multi-line.
4 Enter a data point to “accept” the joint.
The joint will be “cleaned up” according to the tool you selected.
Select the centerlines a short distance from the joint. Also, if a joint does not cleanup
as you wished, reset before accepting or use Edit > Undo and then try again, clicking
on the centerlines in opposite sequence.

Exercise 4: Floor Plan

Î To set up the wall with a centerline

1 Create a new file with name FLOOR using seed2d.dgn.
2 Select Settings > Design File.
3 In the DGN File Settings dialog box, select the Working Units category and set:
Format: MU:SU
Master Unit: Feet with label '
Sub Units: Inches with label "
Accuracy: 1/16

2/23/07 7-73
Lesson 15: Cleaning up Multi-line Joints

4 While still in the DGN File Settings dialog box, select Grid and set:
Grid Master: 0:1.000 (every 1")
Grid Reference: 12 (every foot or 12")
Click OK to close the DGN File Settings dialog box.
5 From the Attribute tool box, set:
Level: Default
Color: white
Style: solid
Weight: 0
6 Select Element then Multi-Line Styles.
Note that the Multi-line dialog box shows the location of each line that makes up the
multi-line.
Note the first entry (Centerline). By default, the offset is 0:0 and Override for
centerline style 7.
7 Select second entry (lower line in graphic figure) by left-clicking on the offset
distance. The entry highlights and is available for editing. Change the offset to -0:3,
(that is, -3").
8 Select the third entry and change the offset to 0:3.
This completes setup for a normal 6" wall with centerline.
Close the Multi-line Styles dialog box.

Î To trace the wall

With AccuDraw active, we will trace the wall.

1 Zoom-Out so that you see an area of about 30' x 20'. You can use the measure tool,
or draw a 30 x 20 block, or use the Grid to judge how large an area is covered by the
screen.
2 From the Linear tool box, select the Place Multi-line tool.
3 Move the cursor to the near upper left of screen and click the data button.
4 Move the cursor straight up and type 1 (1' long vertical wall). Click the data button.
5 Move the cursor straight right and type 24. Click the data button.
6 Move the cursor down and type 15. Click the data button.
7 Move the cursor left and type 15. Click the data button.
8 Move the cursor up and type 15. Click the data button, then press Reset.

2/23/07 7-74
Lesson 15: Cleaning up Multi-line Joints

Î To set up the 3' doorway

1 Still with the Place Multi-line tool, move the cursor so the AccuSnap X is on the first
point of the wall, but don’t accept.
2 Type <O> for origin (AccuDraw may need focus), move the cursor straight down
and type 3. Click the data button.
The beginning of the new wall will be exactly 3' down from the first point, leaving a
3' opening.
3 Move the cursor down and type 9. Click the data button.
4 Move cursor right to the center of the vertical wall. Use AccuDraw to ensure the line
is horizontal. Click the data button, then press Reset.

) If you enter a string of good points as above and accidently enter a bad one, go to
Edit > Undo Last Data Point and you will preserve the good work.

Î To clean up the joint

We will clean up the joint between the first and second series of multi-lines.
1 From Tools menu, select Multi-line Joints.
2 Select the Construct Merged Tee Joint tool.
3 Identify the first multi-line at the joint by clicking on the centerline.
4 Click on the centerline of the intersecting wall.
5 Data point to accept.
If your multi-lines get distorted when you use the joint tool, reset (or Undo if already
placed) and then select the two lines in the opposite order. Your multi-lines are now
automatically joined.

Î To set up the dimensions

We will now create the dimensions on a separate level.
1 Select Settings > Level > Manager and from the Level Manager dialog box, select
Levels > New. Click the new level Name in list box and type “dimensions.” Close the
Level Manager.
2 Select Element > Dimension Styles, and in the Dimension Styles dialog box, select
the Units tab.

2/23/07 7-75
Lesson 15: Cleaning up Multi-line Joints

3 Set Label Format to MU label-SU Label (that is X'-X") and set Accuracy to 1/16.

4 Select Element then Text Styles.

5 In the Text Styles dialog box, set the height and width to 3 for 3" (or .25 ft).
6 Zoom Out to see whole plan and make room for the dimensions.
7 Select the Dimension Element tool.
8 Click on 24' wall and drag up the dimension.
9 Continue dimensioning the drawing.

You have completed the dimensioned floor plan.

To view the design without dimensions, select Settings > Levels> Display (or press <Ctrl-
E>). Double-click on the “Default” level to change the active level, then, click on
“dimensions” to turn off that level.

All your dimensions should disappear. If it doesn’t happen, select Element > Information and
double-click on one of the dimensions. The dialog box shows you a lot of information about
the dimension, including its level. You can change things right there. Try changing the
dimensions to a different level. Be sure to click Apply.

2/23/07 7-76
8 Text

All technical drawings require some annotation. Notes may be call-outs, title-block
information, instructions to the shop or construction, or lists of materials.

MicroStation PowerDraft provides a large number of fonts and features for setting up text
and for placement and editing.

Lesson 16: Text Settings

Certain settings control the text characters. The easiest way to specify these settings is
through the Text Styles dialog box. This dialog box displays by selecting Text Styles from the
Element menu.

Fonts
The top line of the list box shows the name of the Text Style. The remainder of the list box
shows the font, size, line spacing and other characteristics of the named Text Style. If you
want to create your own style, click Style > New and you will be placed in a new, untitled style.

2/23/07 8-77
Text Justification

To select the font to use for the new style, click on the Value field opposite Font. You will see
a list of fonts. Scroll down to pick a font from the list of available ones.

At the bottom of the Text Styles dialog box, you can see how the font will display.

Text Justification
Justification is the orientation of a text element relative to the data point that is used to place
it. The current text justification is shown when you click in the list box.

Text Size and Spacing

From the General Tab of the Text Styles dialog box, you change or set following:

Height Specifies the text height, in working units, in the list box.

Width Specifies the text width, in working units, in this data field.

Slant Specifies the slant value for the individual text characters. You can enter a value from -89
to +89. You use this feature to create italicized text.

Underline Underlines the text automatically.

Fractions Indicates that fractions, numeric characters separated by a slash, should be treated as one
character.

Vertical Text Causes the text characters to display in vertical lines instead of horizontal lines.

From the Spacing tab of the Text Styles dialog box, you have options for:

Line Length Specifies the maximum number of characters allowed per line in a multi-line text
element. This number cannot exceed 255.

Line Spacing Sets the vertical spacing, in working units, between lines in a multi-line text element, or
between text and the specified element when you choose to place text above, below, or
along an element.

Interchar Spacing Specifies the distance, in working units, between each character.

2/23/07 8-78
Lesson 17: Placing Text

Lesson 17: Placing Text

The tools on this palette are for placing, editing, and modifying text. Here are the more
commonly used text placement tools.

Place Text Used to place text elements in your design file or fill in empty text nodes.
Depending on the placement method you select, text will be placed using
some or all of the active text settings. The active element attributes: color,
weight, and line style, and the active angle can affect the way your text is
placed.

Place Note Used to place a line of text with a leader line and arrow as a dimension
element. It is especially useful for placing geometric tolerance symbols,
feature control frames, and quick notes.

Match Text Used to set the active text settings, the same as the corresponding attributes
Attributes of an existing text element.

Change Text Used to change the attributes of an existing text element to the active text
Attributes settings.

Display Text Used to see the attributes of existing text elements.

Attributes

Edit Text Used to replace, add, or delete characters from existing text elements.

Place Text Tools

You can use the Place Text tool to put text elements in your design file. The Method option
menu setting for this tool allows you to choose how you want the text placed.

2/23/07 8-79
Lesson 18: Editing Text

Here are common methods:

By Origin Places text at the current active angle and active text settings. This method must
be specified if you are filling text nodes.

Fitted Forces text to fit between two data points that you supply. The vertical alignment
of the text element is determined by the active text justification. This method
overrides the active angle and active text size settings. You cannot use this
method to place multi-line text.

Above an Element Places text, at the active text settings, above a line or segment of a line string,
shape, or multi-line. The active line spacing setting determines how far above the
element the text will be placed.

Below an Element Places text, at the active text settings, below a line or segment of a line string,
shape, or multi-line. The active line spacing setting determines how far below the
element the text will be placed.

On an Element Places text, at the active text settings, on a line or segment of a line string, shape,
B-spline curve, or multi-line.

Along an Element Places text along - above or below - a curve, arc, ellipse, line, line string, or shape.
Each character that is placed becomes a single text element that is a component
of a graphic group. The characters are placed at the active text settings at a
distance equal to the active line spacing.

Î To place text
1 From the Text tool box, select the Place Text tool.
The Text Editor and Place Text tool settings windows open.
2 From the tool settings window Method option menu, choose the appropriate text
placement method.
3 In the Text Editor window, type in the desired text.
4 Enter data point(s) to position the text.

Lesson 18: Editing Text

The Edit Text tool is used to change text in existing text, text node, or dimension elements.

Î To edit text
1 From the Text tool box, select the Edit Text tool.
2 Enter a data point to identify the text element that you want to edit.
3 Enter another data point to accept the text element.
The current text now displays in the Text Editor window.

2/23/07 8-80
Lesson 18: Editing Text

4 In the Text Editor window, make the desired changes to the text.
While in this window, you can use the arrow keys to move the displayed cursor. The
<Delete> key can be used to delete the character to the left of the cursor. The
<Backspace> key can be used to delete the character to the right. Tapping and
dragging on text highlights it and puts it overstrike mode.
5 Click on the screen to apply the changes to the text element.

Exercise 5: Notes on Floor Plan

1 Go to File > Open and open the floor plan (FLOOR.DGN) you completed in
Exercise 3: Sprinkler Protector (page 60).
2 Annotate the floor plan as shown:

) Hint: Visually note that the letters should be about the same height as the walls are thick.
3 Select Element > Text and set the height to 0:6 or just enter 0.5 (1/2 foot is the same
as 6"). Make the width the same.
4 Make the line spacing 6" also.
You can use the Architectural text font, or look for one you like better by pulling
down the list of fonts.
5 Place the text by selecting the Place Text tool from the Task Navigation tool bar.
6 Type Reception and click on the floor plan to place it. Continue until all the text is
placed.
7 From the Task Navigation tool bar, open the Text tool box and select the Edit Text
tool.

2/23/07 8-81
Lesson 18: Editing Text

) If you are entering and editing a lot of text you may want to tear off the Text tool
box. See Open as Toolbox on the bottom of the tool list. If you are using the Classic
tool frame, “tear off ” the tool bar by sliding cursor out over the tool bar then
perpendicular to it.
8 Change some of the text already placed by identifying it, making changes, then
clicking on the screen to apply the changes.
9 Change the color of some of the text by first highlighting it and then clicking on a
new color using the Attributes tool box.

You have now learned how to set up text, place text on your drawing, edit or change text after
it has been placed and how to change the attributes of the text after placement.

2/23/07 8-82
9 Cells

A cell is a group of elements combined into one complex element and stored in a cell library
or in your design file as a shared cell. Any cell can be easily recalled and placed, and then
manipulated as a single element. Cells reduce repetitive drawing and encourage
standardization. With the proper setup, any cell can be used in any drawing. Therefore,
everyone working on a project can use the same cells if they are given access to the same cell
library.

In order to be able to create and use cells, there are several general steps that you need to
perform. Some of these steps must be performed each time you place a cell, others only need
to be performed when you enter the design file, and still others only have to be performed
one time. The following list outlines these general steps. Each step is also covered in more
detail later in this chapter.

Î To create and place cells from a library

1 Create the cell library. This step only has to be performed one time. Once you create
the library it can be used to store all your cells and used later for other drawings.
2 Attach the cell library to the design file (it is already attached if you just created it).
This step will only have to be performed one time for each design file you want to
attach the cell library to as long as you File > Save Settings after attachment.
3 Draw the elements that make up the cell.
4 Group the elements that make up the cell with a fence.
5 Define a cell origin. A cell origin is the point with which the cell is placed.
6 Create the cell in the cell library.
7 Make the desired cell active and place it in the design file.

Lesson 19: Cell Library Creation

All cells have to be stored in and recalled from a cell library. If no cell library is available to be
used with your design file, you must create one. Creating a cell library is similar to creating a
design file.

2/23/07 9-83
Lesson 20: Cell Library Attachment

Î To create a cell library

1 Select Element > Cells and from the Cell Library dialog box that opens, select File >
New.
The Create Cell Library dialog box opens.
2 Enter the name of the new library in the File Name data field. You can either specify
a full path for the file in this box or use the Directories list box to navigate to the
desired directory. MicroStation PowerDraft automatically appends the standard cell
library extension .cel to your filename.
3 Click Save to create the new cell library and close the dialog box.
Unless you change the Save in field, this file is automatically saved to c:\Documents
and Settings\All Users\Application
Data\Bentley\Workspace\Projects\Untitled\cell.

Lesson 20: Cell Library Attachment

A MicroStation PowerDraft design file can have only one cell library attached at a time. But,
several design files can have the same cell library attached at the same time. When you create
a new cell library, that library is automatically attached to your current design file. By default,
once a cell library is attached to a design file, if you Save Settings, it remains attached until you
manually detach it or attach a different one.

Î To attach a cell library

1 Select Element > Cells.
2 From the Cell Library dialog box that opens, select File > Attach File.
The Attach Cell Library dialog box opens.
3 Enter the name of the desired library in the Name data entry box. Use the
Directories and Files list boxes to navigate through the directory structure to the
desired file.
4 Click the Open button to attach the specified library and close the dialog box.

Lesson 21: Creating Cells

Once you have created and attached your cell library, you can begin creating and placing cells.

2/23/07 9-84
Lesson 22: Placing Cells

Î To create a cell
1 Create and/or attach a cell library.
2 Place the elements in your active file that will be used to create the cell. Make sure
that you have the desired element attributes set when you place these elements.
3 Place a fence, or use the Element Selection tool, to group the element(s) you want to
include in the cell.
4 Open the Cells tool box.
5 Select the Define Cell Origin tool.
6 Define the origin of the cell with a data point.
7 From the Cell Library dialog box, click the Create button.
The Create Cell dialog box opens.

8 Fill in the appropriate name and description, select the type and click Create.

Name Enter the cell name. This name can be any combination of alphanumerics, periods,
underscores, or commas. Alphabetic characters can be entered in uppercase or
lowercase.

Description Enter an optional description.

Type Choose either Graphic or Point cell type from the option menu. Usually graphic.

The new cell name appears in the Cell Library dialog box.

Lesson 22: Placing Cells

The Cell Library dialog box contains a group box called Active Cells. The buttons in this
group box are used to designate a cell as the active cell, active point, active line terminator, or
active pattern cell.

Placement

The cell name that displays beside this button is the cell that is placed with the Place Active
Cell and Place Active Cell Matrix tool (Cells tool box). The word NONE appears if no cell is
currently active.

2/23/07 9-85
Lesson 22: Placing Cells

Point

The name that appears beside this button indicates which cell, if any, will be used as the active
point. The active point does not have to be a cell, it can also be a zero-length line element or
text character. The words, Element or Character display beside this button if a line or
character is the current active point. Do not confuse the active point with a point cell. They
are two separate items.

Terminator

The cell name that appears beside this button is the cell that is placed with the Place Active
Line Terminator tool (Cells tool box). The word NONE appears if no line terminator cell is
currently active.

Pattern

The cell name that appears beside this button is the cell that will be used to pattern an
element. Patterning is done with the various tools found on the Patterning tool box. The
word NONE appears if no pattern cell is currently active.

Î To activate a cell
1 From the Cell Library dialog box, click on the desired cell from the list box.
2 From the Active Cells group box, select the appropriate button to activate the cell,
for Placement, Point, Pattern or Terminator.

Cells Tool Box

The tools on the Cells tool box are used for defining cell origins, placing cells, and displaying
information about cells.

Place Active Cell Place the active cell.

Place Active Cell Place a matrix (rows and columns) of the active cell.
Matrix

Select and Place Identify a cell and place an additional instance(s).

Cell

Define Cell Origin Define the cell origin (the point about which the cell is placed) when
creating the cell.

Identify Cell Display the name and level of a cell that is in the DGN file.

2/23/07 9-86
Lesson 22: Placing Cells

Place Active Line Add a terminator to a line segment.

Terminator

Replace Cells Replace a cell(s) (or all instances of a shared cell) in the design with
another of the same name from an attached library.

Cell Selector

Selecting Utilities > Cell Selector automatically opens the Cell Selector dialog box. Each
button is associated with a cell stored in a cell library. In the dialog box’s default button
configuration, clicking a button has the effect of activating the associated cell and selecting
the Place Active Cell tool. You can then dynamically drag the cell and place it. Use Active
Angle and Active Scale to vary the angle and scale at which the cell is drawn.

You can have several cell libraries loaded in the same cell selector. Use the File menu on the
Cell Selector tool to load another cell library.

Exercise 6: Add Symbols to the Floor Plan

1 Go to File > Open and open the floor plan you completed in Exercise 3: Sprinkler
Protector (page 60) and updated in Exercise 5: Notes on Floor Plan (page 81).
2 Choose Settings > Level > Manager. Create a new level 20. Make level 20 the active
level.
You will add all symbols to level 20.
3 Close the dialog box.
4 Select Element > Cells to display the Cell Library dialog box.
5 From Cell Library dialog box, select File > New.
6 Enter the name Fixture for the library.
7 Click OK and then close the dialog box.

2/23/07 9-87
Lesson 22: Placing Cells

8 With the Place Block tool, draw a block 2' x 2'.

9 With the Place Circle tool, place a circle in the center of the block.
This represents a sink.
10 Place a fence around the block-circle.
11 From the Cells tool box, select the Define Cell Origin tool.
12 Click on the corner of block-circle to represent the handle-point, that is the point by
which you will place this symbol.
13 Select Element > Cells and click the Create button.
14 In the Create Cell dialog box, supply the name (sink), and a description and click
Create.
15 Make the cell active by clicking Placement in the Active Cells section of the Cell
Library dialog box.
You have now created a library, created a cell, added the cell to your library and made
it the active cell for placement.

Î To place the “sink” cell in the drawing

1 Select Utilities > Cell Selector.
The Cell Selector dialog box opens showing the “sink” cell.
2 Click on the button which displays your “sink” cell.
This automatically makes the cell active for placement and opens the Place Active
Cell tool settings window.
3 Click in the design file to place the sink cell and Reset.
4 Draw additional symbols for a tub, toilet, and some furniture. Add to your symbol
library and save the updated library.
A large number of cell libraries are supplied with MicroStation PowerDraft. By
default they are stored in C:\Documents and Settings\All Users\Application
Data\Bentley\Workspace\System\Cell. If you don’t find the Cell folder there, use
your Windows Search and find the folder.
5 Experiment by attaching remodel.cel and then open Utilities > Cell Selector and
place a few cells.

Cell libraries are one of the most productive aspects of any CAD software.

2/23/07 9-88
10 Patterning and Crosshatching

Patterning Tool Box

These tools are used to pattern areas along linear elements. From the Task Navigation bar on
the right hand side of the screen, click and hold down the Hatch tool and then click Open as
Toolbox.

The available tools are:

Hatch Area Used to hatch an area.

Crosshatch Area Used to crosshatch an area.

Pattern Area Used to pattern an area by tiling instances of the active

pattern cell.

Linear Pattern Used to draw a pattern along a linear element.

Show Pattern Attributes Used to display the angle and scale attributes of a pattern
element.

Match Pattern Attributes Used to set the active pattern angle, scale, and delta settings to
match the attributes of an existing pattern element.

2/23/07 10-89
Lesson 23: Hatch Area Tool

Change Pattern Used to change an existing pattern to match the current

attributes or to redefine the intersection point of patterning.

Delete Pattern Used to delete patterning.

Lesson 23: Hatch Area Tool

You use the Hatch Area tool to hatch an area with lines. The various settings associated with
this tool determine how the hatching looks and where it is done.

Spacing Sets the space between the hatching lines. By default, this value is set to zero. You
will receive an error message in the Command Window if you do not enter some
other value in this data entry box. Values should be entered in working units
format.

Angle Sets the angle at which hatching lines will be drawn. By default, this value is also
set to zero. You can enter the desired angle in this data entry box.

Tolerance When patterning along or inside a curved element, the curve is approximated with
a series of line segments that are used as guides for patterning. The tolerance is the
maximum distance between the element and these line segments guides. If the
tolerance is small, the line segments conform closely to the curve and the
approximation is more accurate, but processing time increases. If tolerance is
large, line segments do not conform closely to the curve and the approximation is
less accurate, but processing time decreases.

Associative Pattern If on, hatching is associated with a patterned element and is automatically moved
or resized when the element is manipulated or modified. If the patterning method
is intersection, union, difference, or flood, a complex shape that bounds the
patterned area is created, and the hatch lines are associated to the complex shape.

Snappable Pattern If on, you can snap to the elements in the pattern.

Method Determines the area that will be hatched. The options available are:
• Element: The interior of a shape, ellipse, or closed B-spline curve, or between
the components of a multi-line will be patterned.
• Fence: The area inside the fence will be patterned.
• Intersection: The intersection of two or more closed elements will be patterned.
• Union: The union of two or more closed elements will be patterned.
• Difference: The difference between two or more closed elements will be
patterned.
• Flood: The minimum area enclosed by a set of elements will be patterned.
• Points: An area defined by a series of data points will be patterned. Each
specified data point defines a vertex.

Max Gap When Method is set to Flood, displays the maximum distance, in working units,
between the endpoints of enclosing elements.

2/23/07 10-90
Lesson 24: Crosshatch Area Tool

Lesson 24: Crosshatch Area Tool

The Crosshatch Area tool is very similar to the Hatch Area tool. The tool settings and the
procedures are the same, except that there are two additional data entry boxes to specify the
spacing and angle of the crosshatch lines. There are two ways that you can use the Spacing
and Angle boxes for the crosshatch lines:
• You can enter the desired angle and/or spacing, in working units, in the appropriate data
entry box.
• You can leave either value set to zero. If the spacing is zero, the crosshatch lines have the
same spacing as the hatch lines. If the angle is zero, MicroStation PowerDraft
automatically calculates an angle for you. This angle will be 90 degrees from the angle that
you specified for the hatch lines. For example, if you leave both Angle values set to zero,
the hatch lines will be at 0 degree angles and the crosshatch lines will be at 90 degree
angles.

Lesson 25: Pattern Area Tool

The Pattern Area tool is used to pattern an area by tiling instances of the active pattern cell.
There are several settings associated with this tool that determine what cell is used, how it will
be spaced, and what area will be patterned.

Pattern Cell Displays the cell that will be used to create the pattern. You
can select another cell by entering a different cell name in this
box, or by using the Pattern button on the Cell Library dialog
box.

Scale Sets the scaling factor for the pattern cell.

Row Spacing Specifies the desired spacing between rows in this data entry
box.

Column Spacing Specifies the desired spacing between columns in this data
entry box.

Angle Specifies the angle at which instances of the pattern cell are
placed.

Tolerance Sets the value for the maximum distance between a curved
element and the line segment guides used for patterning.

Associative Pattern Determines whether or not patterning automatically adjusts if

the patterned element is modified.

Snappable Pattern Determines whether you can snap to the individual pattern
elements.

2/23/07 10-91
Delete Pattern Tool

Method Specifies the area that is patterned through this option menu.
The individual items are described with the Hatch Area tool.

Max Gap When Method is set to Flood, sets the value for the maximum
distance between the endpoints of enclosing elements.

Î To pattern an area using the Element, Fence, or Flood method

1 From the Patterns tool box, select the Pattern Area tool.
2 In the Pattern Area tool settings window, set all the desired settings.
3 For the Element method, enter a data point to identify the element.

For the Flood method, enter a data point inside the area
enclosed by the set of elements.
For the Fence method, skip this step.

4 Enter a data point to place the origin of one of the pattern cells.

Delete Pattern Tool

Most patterning operations can be undone with the Undo item from the Edit menu. But
some patterning operations are so complex that they exceed the capacity of the undo buffer.
This means that the only way to undo the patterning is to delete. The Delete Pattern tool
provides a quick and easy way to do this.

Î To delete patterning
1 From the Patterns tool box, select the Delete Pattern tool.
2 Enter a data point to identify the patterning that you want to delete.
3 Enter another data point to accept it.

Hatching Around Text

To hatch around text in an element, create an element and before choosing the Place Text
tool, change the area in the tool settings box from solid to hole. Place text inside the element,

2/23/07 10-92
Hatching Around Text

and hatch element making sure that the associative pattern setting is off. Works for the
Element, Fence, and Points Methods but not for Flood.

If you use the Flood method, you can just click on the text or other elements that you want to
hatch around and those items will be missed. Click on the down arrow on the lower right of
Hatch tool settings.

Exercise 7: Hatch Walls

1 Select File > Open and open the floor plan FLOOR.DGN.
2 From Main Classic tool box, select the Hatch Area tool.
3 In the Hatch Area tool settings window, set the following:
Method: Element
Spacing: 3" (0:3)
Angle: 45
4 Turn on Associative Pattern.
5 Identify the multi-line wall by clicking anywhere on the wall. It changes color and
prompts for “accept-reject.” Click anywhere on the design file to accept.
The whole wall will be hatched.
This works the same for crosshatch or pattern fill.
6 Select Edit > Undo Hatch Area.
The hatching disappears.
7 Select Edit > Redo Hatch Area.
Hatch is back.

Î To scale the laboratory room to make it 1.5 times wider

1 Place a fence around right half of the laboratory.
2 From the Fence tool box, select the Manipulate
Fence Contents tool.
3 In the tool settings window, select Stretch.
4 Define the origin and use AccuDraw to enter 6'.
Accept.

) Note that dimensions and hatch pattern adapt to the new walls! This is associative
dimensioning and associative patterning.

2/23/07 10-93
MicroStation PowerDraft for Students Copyright © 2007 Bentley Systems, Incorporated Do Not Duplicate

2/23/07 10-94
11 Dimensioning

You were introduced to dimensioning in Exercise 2: Stepped-Shaft (page 52). The basics of
dimensioning your design are quite simple. This chapter introduces some additional aspects
of dimensioning so you will be prepared for your most comprehensive designs.

MicroStation PowerDraft dimensioning tools place dimensions for your file as a single
element. You can delete, move, rotate and perform other operations on your dimension as a
single element. Dimension elements have attributes just like other elements. Dimensions will
take on the active color, line style width, etc. The text size in a dimension is set by the active
text size in real world coordinates.

Since text sizes are expressed in real world units, you have to think ahead to the scale you will
use on plotting so you assign the correct real world text size.

Here’s a simple table to help you set text sizes:

Mechanical
Architectural Real World Height of Real World
Plotting Height of Text Height of Plotting Text on Height of
Scale on Paper Text Scale Paper Text
1/4” to ft 1/4 1’ 1:1 1/4” 1/4”
1/4” to ft 1/8 1/2’ 1:1 1/8” 1/8”
3/8” to ft 1/4 .67’ 1:2 1/4” 1/2”
3/8” to ft 1/8 .33’ 1:2 1/8” 1/4”
1/2” to ft 1/4 .5’ (6”) 1:4 1/4” 1”
1/2” to ft 1/8 .25’ (3”) 1:4 1/8” 1/2”
1/8” to ft 1/4 2’

Annotation Scale
The above values can be placed automatically, if you know in advance
the scale you will use when plotting your drawing. Select Settings >
Drawing Scale to open the Drawing Scale dialog box.

In this dialog box, the “A” on the left side toggles on and off the
Annotation Scale lock. Set the scale as desired, for example, ½" to the

2/23/07 11-95
Dimension Element

foot, then enter text height and width in the size you want to see on paper. For example, if
you want the text to be ¼" high and scale is ½" to ft, enter your text as ¼" in Settings > Text
Styles. MicroStation PowerDraft actually stores the height as 2' high so when scaled at ½' to
ft, the letters will be ¼" on paper. You can use Annotation Scale or not as you choose. If not,
you do the math as indicated in the table above.

Dimension Element
A dimension element is a special element type. It is composed of combinations of the five
following entities.
• Dimension Line: A line that shows the direction of a measurement or the size of an angle.
• Dimension Text: The text used to display the length of a measurement or the size of an
angle.
• Extension Lines (optional): Lines that are used to extend the lines of the element you are
dimensioning, to better identify the area that is being dimensioned.
• Dimension Line Terminators (optional): Objects, like arrows or strokes, that are placed at
each end of the dimension line.
• Mark (optional): Used to identify the center of a circular element.

Dimension Styles
After you have adjusted all the dimension settings, save them as a Dimension Style. It is really
just a file that contains all the settings. You can then switch between one set of settings to
another by selecting the style you want from the list of styles in the Dimension Styles dialog
box (Element > Dimension Styles).

Dimensioning tool box

The tools in the Dimensioning tool box are used to perform general dimensioning.

) With V8 2004 Edition and beyond, the Dimension tool box was shortened and renamed to
Dimensioning.

2/23/07 11-96
Lesson 26: Placing Dimensions

The Dimension Tools tool frame contains four tool boxes related to certain types of
dimensioning: Angular Dimensions, Linear Dimensions, Radial Dimensions and
Misc(ellaneous) Dimensions.

) A dimension element can be dropped to its component lines, line strings, ellipses, arcs, and
text elements with the Drop Element tool. This tool is found on the Main tool frame.

Lesson 26: Placing Dimensions

The three most commonly used tools on the Dimensioning tool box are:

Element This is the best dimensioning tool of all! This tool dimensions any
Dimensioning element such as line, circle or arc in the way that is best for that element.
After selecting the tool, identify an element and then press the <Enter>
key to switch between modes (the tool settings window must have the
Input Focus). For example, you can show the dimensions of a line using
arrowheads or tick marks. When dimensioning a circle, you can get the
radial, diametrical or other dimensions by first click on the Dimension
Element icon, then on the circle, then press <Enter> to switch between
modes. Use this tool whenever dimensioning a single element.

Linear This tool is used to dimension linear size with each dimension computed
Dimensioning from the endpoint of the previous dimension and placed in line. Arrows
are used as terminators.

Angular This tool is used to dimension an angle.

Dimensioning

Linear Dimensioning tool

This tool is used to dimension the linear distance between two points. Each dimension,
except the first, is computed from the endpoint of the previous dimension. The two settings
associated with this tool are described below.

2/23/07 11-97
Lesson 27: Placing Angular Dimensions

Î To dimension the distance between two points

1 From the Dimensioning tool box, select the Linear Dimensioning tool.
2 Enter a data point to define the origin.
3 Enter a second data point to define the direction of the dimension line, then move
the cursor away from the object to define extension line depth.
4 Continue clicking points to chain the dimension.
5 Reset to place the dimension in the design go back to step 4 to define another
dimension endpoint.
6 (Optional) Go back to step 3 to dimension from the last data point in a different
direction or Reset and go back to step 2 to start a new size dimension from a
different origin.

You can use this tool to create a string or chain of dimensions. If you later want to insert a
dimension in the chain, use the insert vertex tool. If you want to remove one of the inner
dimensions, use the delete vertex tool.

Linear Dimension tool box

Tools in the Linear Dimensions tool box are used to create specialized types of linear
dimensions.

Lesson 27: Placing Angular Dimensions

The Angular Dimensioning tool is the third tool in the Dimensioning tool box.

Angular Dimensioning tool

This tool is used to dimension angles. Each dimension, except the first, is computed from the
endpoint of the previous dimension.

Î To dimension an angle
1 From the Dimensioning tool box, select the Angular Dimensioning tool.
2 Enter a data point to define the dimension origin. For example, snap to the end of a
horizontal line. The dimension is measured in a counter-clockwise direction from
this point.
3 Enter a second data point to define the length of the extension line and the radius of
the dimension arc, for example, slightly away from first point.
4 Enter a third data point to define the vertex of the angle.

2/23/07 11-98
Lesson 28: Placing Radial Dimensions

5 Enter a fourth data point to define the endpoint of the dimension. For example, snap
to the end of the first sloped line you want to dimension to.
6 Reset to complete the dimension.
OR
Go back to step 5 to dimension an angle that has its origin at the endpoint of the
dimension just placed.

Angular Dimensions tool box

Tools in the Angular Dimensions tool box are used to create specialized angular dimensions.

Lesson 28: Placing Radial Dimensions

The tools of this tool box are used to dimension the diameter or radius of a circle or arc and
to place a center mark. The most commonly used tools are:

Dimension Radial Used to dimension the radius of a circle or circular arc.

Dimension Diameter Used to dimension the diameter of a circle or circular arc.

Dimension Diameter Perpendicular Used to dimension the diameter of a circle or a circular arc, with the
dimension placed perpendicular to the plane of the circle or arc and
with tangent extension lines extending to the circle or arc.

Dimension Radius (Extended Leader) Used to dimension the radius of a circle or circular arc with an
extended leader.

Place Center Mark Used to place a mark at the center of a circle or circular arc.

Dimension Diameter tool

This tool is used to dimension the diameter of a circle or a circular arc.

Î To dimension the diameter of a circle or arc

1 From the Radial Dimensions tool box, select the Dimension Diameter tool.
2 Identify the circle or arc.

2/23/07 11-99
Lesson 28: Placing Radial Dimensions

If the dimension is to be placed inside the circle, this data point defines the endpoint
of the dimension.
3 Enter another data point.
If the dimension is placed inside the circle, this data point accepts the dimension.
If the dimension is to be placed outside the circle, this data point positions the
dimension.

Misc(ellaneous) Dimensions tool box

Tools in the Misc(ellaneous) Dimensions tool box are used to perform dimensioning
that is not specific to linear, angular, or radial dimensioning.

Exercise 8: Dimensioning

By referring back to the preceding three lessons, try your hand at drawing and dimensioning
this diagram:

Some suggestions:
• Set the Working Units to inches and tenths.
• Set the Text height and width to .375".
• Place two circles at 0,0: the first radius a 2 1/16, second radius at 1 11/16.
• Place three circles 7/8" below the first centerline with radii: 1 1/16, 11/16 and 1 7/16.

2/23/07 11-100
Lesson 28: Placing Radial Dimensions

• Do the two 1/4" fillets. Truncate none. Use the Partial Delete tool.
• Use the Place Multi-line tool with two lines, space 3/16 off center for key.
• Use the Dimension Element tool for many of the dimensions

2/23/07 11-101
MicroStation PowerDraft for Students Copyright © 2007 Bentley Systems, Incorporated Do Not Duplicate

2/23/07 11-102
12 Comprehensive Exercise

Exercise 9 - City Tract Map

The City Tract Map is a comprehensive exercise that brings together many of the 2D
functions that you have learned.

Î To create a horizontal line and rotate it

1 Create a new file from 2dseed.dgn and set the working units to feet and inches, then
Save Settings.
2 Select the Place Line tool.
3 With Input Focus on AccuDraw, type the letter <P> to open the Data Point Keyin
dialog box.
4 Type 0,0 and press <Enter>.
This puts first point of line at the origin of the design plane.
5 For the end of the line, use AccuDraw and move the screen cursor in the positive X
direction. Type 330 in the AccuDraw X field and click the data button to set the end
of the line.
6 Right-click and then Fit View.
7 In the Manipulate tool box, click the Rotate tool.
8 In the tool settings window, turn on the Copies check box.
9 Set the Method to Active angle and set the angle to 90º.
10 Identify the element by clicking the horizontal line (at the AccuSnap X) at the center
of the line.
11 Locate the pivot point by snapping to the center of the horizontal line.
12 Right-click to end the Rotate operation.

2/23/07 12-103
Comprehensive Exercise

13 Click Fit View.

Î To create parallel lines

1 From the Manipulate tool box, select the Move Parallel tool.
2 In the Move/Copy Parallel tool settings window, turn on the Distance check box and
enter 11 (streets are 22' wide).
3 Turn on Make Copy.
4 Identify the vertical line.
The copy is made on the cursor side of the vertical line.
5 Left-click the right side of original line to place a copy.
6 Click the left side to place a copy on the left.
7 Click Reset.
8 Repeat steps 4 - 7 for the horizontal line.

Î To clip the curb lines

We will use the Window Area tool to zoom in on the intersections and the Partial Delete
tool to clip a portion out of the curb lines. When we use the Fillet tool, it will not trim the
bottom half of our vertical line.
1 From the View Control bar, select the Window Area tool to zoom in on the
intersection of the streets.
2 From the Modify tool box, select the Partial Delete tool.
3 Click a start point and end point to delete the parts of the intersection to be deleted.

2/23/07 12-104
Comprehensive Exercise

The intersection should look like this:

Î To place arcs at each corner

Using the Construct Circular Fillet tool, we will place arcs at each corner of the streets.
1 From the Modify tool box, select the Circular Fillet tool.
2 In the tool settings window, set the Radius to 30 and Truncate to Both.
3 Click the first line and then the second line that makes up the intersection.
4 Click once more to accept
5 Repeats steps 3 and 4 for the all four arcs.

Î To change element attributes

1 With the Change Element Attributes tool, change the element attributes of the
center lines by setting the following and clicking on the centerline:
Color: yellow
Linestyle: 4
Weight: 0
You can also select the centerlines then drag and drop to yellow and linestyle 4 on the
Primary Tool tool box.
2 Reset the elements attributes (Color, Linestyle, and Weight) back to 0.

Î To shorten the lines

Using the Extend Line tool, we will shorten all three vertical lines at each end of the
north/south streets by exactly 30 feet.

2/23/07 12-105
Comprehensive Exercise

1 From the Modify tool box, select the Extend Line tool.
If the Extend Line tool is not displayed in the Modify tool box, right-click the tool
box and turn on Extend Line to add it to the tool box.
2 In the Extend Line tool settings window, turn on the Distance check box and set the
distance to -30. Turn on the Front End check box.
3 Click on the outside end of the six vertical lines.

shorten all three lines

Î To create the adjacent streets

1 From the Fence tool box (opened from the Main tool box), select the Place fence
tool.
2 In the Place Fence tool settings window, set the Fence Mode to Overlap and place a
fence around the intersection.
3 From the Manipulate tool box, select the Mirror tool.
4 In the Mirror tool settings window, turn on Make Copy and Use Fence.
5 Tentative the end of one line so that the copy of the intersection lines up with the
original intersection. Then click to Accept.
6 Fit View to see the two intersections.
7 With the Place Fence tool, place a fence around both intersections.
8 Select the Mirror tool again.
9 In the Mirror tool settings window, set Mirror About to Vertical.
10 Snap to the end of the horizontal line and Accept.
11 Select the Place Fence tool to turn off the fence.

2/23/07 12-106
Comprehensive Exercise

12 Fit View to see the four intersections.

Î To complete the lot

1 Place a fence around the streets in the upper right corner of the street grid. In the
Place Fence tool settings window, make sure the Fence Mode to Overlap.
2 Use the Rotate tool to copy the fenced streets at 150 degrees.
The center lines of the streets should be connected.

3 From the Modify tool box, use the Extend Elements to Intersection tool to finish the
street lines.

4 Use the Construct Circular Fillet tool to fillet the connections of the streets. In the
Construct Circular Fillet tool settings window, set the Radius to 75 feet. Remember
to match the element attributes of the lines being modified.

2/23/07 12-107
Comprehensive Exercise

5 From the Linear tool box, select the Place Point or Stream Curve tool to draw a pond
in the middle block of the streets.

6 From the Manipulate tool box, select the Move Parallel tool and in the tool settings
window turn on the Make Copy check box and set the Distance to 124 ft.
This copies the outside streetlines back to make the rear property lines.

7 Use the Extend tools to extend property lines to meet each other and the street
edges.

8 Use the Move Parallel tool to make lots 50 feet wide.

2/23/07 12-108
Comprehensive Exercise

) Make property lines the correct length before copy parallel rather than copy and then
have to extend them all.

9 Use the Extend tools to complete your lots.

10 Change the element attributes of the lot lines as follows:
Linestyle: 6
Color: green
Weight: 1

Î To change element attributes with PowerSelector

1 With PowerSelector, select all lot lines.
2 From the Attributes tool box, click on the Active Line Style menu and from the
option menu select 6. From the Active Color menu, select green and from the Active
Line Weight menu select 1.
3 In the PowerSelector tool settings window, click the line icon (on the top row) and
the plus sign (on the bottom row).

4 Draw a line through the groups of lot lines and change all the attributes at one time.

2/23/07 12-109
Comprehensive Exercise

Houses and Details for the City Tract Map

1 Open your City Tract Map design file.
2 Set the Element Highlight Color (Settings > Design File > Color) to any color but
red.

3 Zoom into an unused portion of the file.

4 Use the Place Shape tool to draw the house roof outlines, using a weight of 2,
linestyle of 0 and color red. Draw the roofs on level 5.
The dimensions are shown for sizing only. Don’t include dimensions in your cells.

) AccuDraw works really well here.

Leave the above houses in your design file for now. We will make them into a cell
library later.
5 Move the center lines of the streets to level 3. Select all yellow centerlines by Edit >
Select By Attributes. In the dialog box, choose color yellow and click Execute. All the
yellow lines are now selected. Change your active level to 3 by clicking on Level on
Primary Tools tool bar and drag to level 3. Drag and drop on 3 even if 3 was already
set. This is the fastest way to change any attribute.
6 Deselect by clicking on the Element Selection tool and then click on the blank part
of screen. Change your active level back to 1.
7 Type <Ctrl-E> to open the Level Display dialog box. Click Level 3 to turn off the
level that displays the centerline.
8 Use the Place Curve tool to draw a stream below the city. Draw the stream in blue on
level 19.
9 Draw a green curve on level 57 to represent a golf course in the center section of the
subdivision.
10 On level 1, using color 0, draw a line string at the upper right of your drawing that
will be used as a True North Indicator.

2/23/07 12-110
Comprehensive Exercise

Adding Text to the City Tract

This exercise uses many of the text placement tools discussed earlier.
1 Open your City Tract drawing. Set your active level to 12, color to 0 and weight 0.
2 Use the Place Text tool with Method set to Above Element to place names on the
streets. Use a text size of 12, Font 3, and set Line Spacing to 5 feet.
3 Set Interchar(acter) Spacing to 0.
4 Label the north arrow using font 0 with a text size of 12 feet.
5 Label the City Tract using font 42 and a size of 30 feet.
6 Use the Change Text tool to change the north arrow text font to 7, and size 20 feet.
7 Use font 42 and size of 15 feet to label “Blue River.” In the Place Text tool settings
window, set Method to Along Element. Click on the river edge and accept.
NEW SUBDIVISION

Î To create a cell library and cells

The dimensions shown in the illustrations are for aiding you with your cell creations.
They are not part of the cell.
1 From the Element menu, select Cells.
2 In the Cell Library dialog box, select File > New.
3 In the Create Cell Library dialog box, create a new cell library with the name xx.cel
where xx represent your initials. It will be attached to your Tract Map file.
4 Create three cells from the three roof outlines you drew previously. Define each cell
origin by snapping to the lower left corner of the roof. Name the cells house1,
house2 and house3.

2/23/07 12-111
Comprehensive Exercise

5 Set your active level to 5, weight to 1, and color to anything you like.
6 Using the Place Stream or Curve tool, create a cell representing a tree.

7 Create an arrowhead point cell, which will be used as a line terminator for the True
North Indicator. Select the Place SmartLine tool and place a data point.
8 Using AccuDraw with the compass set to distance and angle (hint: hit the space bar
to change from x,y to distance, angle) draw the following three lines:
Distance 24.5, angle 30.
Press <V> to rotate AccuDraw compass back to View.
Distance 24.5, angle 150.
Press “<V> again.
Distance 14, angle 300.
Snap back to the starting point, accept it, and then reset.

9 Create a cell representing a chain link fence using the Place Line tool. Each section of
the X is 5 feet long. Use the dimension shown as a guide, it is not part of the cell.

10 Place cells of the roof outlines on some lots. Use all three buildings. Utilize your
Active Angle when placing buildings on angled lots.
11 Make the tree your active cell and place trees randomly on the drawing.
12 Add a chain link fence somewhere on your drawing. To do this, draw a line string
where the chain link fence should be.

2/23/07 12-112
Comprehensive Exercise

13 From the Patterns tool box, select the Linear Pattern tool. In the tool settings
window, set Cycle to Complete. Set the pattern cell to the name of your chain link
cell, set the scale to 5.0, then click on the line string.

2/23/07 12-114
13 Printing Your Drawing

MicroStation PowerDraft has one dialog box for setting up how your drawing file will be
printed.

The Print dialog box opens when you select File > Print.

Defining What to Print

You will often want to create several hardcopy drawings from one design file. The architect
will want a floor plan with dimensions, and then a floor plan with no dimensions but showing
furniture arrangement. Select File > Print to display the Print dialog box. To tell MicroStation
PowerDraft which portion of your design file you want to plot there are two methods: Fence

2/23/07 13-115
Defining What to Print

and View. To select either one of these methods, see the General Settings > Area on the Print
dialog box.

View

Click View or Fit All or Fit Master in the Area field. Then, select the view number in the View
field.

Fence

A print can be created from a fenced area, if a fence exists in the design file (this is the
recommended method).

Printer and Paper Size

In this area of the Print dialog box, you select the printer
driver, the paper size and orientation of the paper.

Use the Windows driver whenever possible. If you have a

special situation, click File > Select Bentley Driver and then
select the one you want such as HPGL2.plt if you need to
spool a file for HPGL language.

Click on the Paper option menu and choose the paper size from a list of available paper sizes
for the selected printer. Included are Letter, A (8.5 x 11), B (11 x 17), C (17 x 22). The list of
selections depends on the Windows printer that you select under File > Configure Windows
Printer. The Total Area (printable area) that displays takes into account the necessary margin
on the paper. You can turn on the Full box to use all of the paper, but see the Tool tip on that
check box. Also, click on whether you want to use a portrait or landscape layout.

2/23/07 13-116
Defining What to Print

Print Scale and Position

The Print Scale and Position area of the Print dialog box is used to layout your drawing on the
page. The dialog box shows the extreme X and Y dimensions of your drawing given the scale
shown. MicroStation PowerDraft automatically calculates the scale that will draw your
drawing so either width or height of the extremes of your drawing equals width or height of
the page you selected. That is, MicroStation PowerDraft calculates the largest scale that can be
used to fit your whole fence or view on the paper. Normally that produces a strange scale, so,
if your drawing is to be to a standard scale, you can edit Scale to make it the largest standard
scale that will fit.

Note: Scale as used in MicroStation PowerDraft Print dialog box is the reciprocal of
mechanical or architectural drafting scales. It is similar to mapping scales.

So, for example, if you want to plot a mechanical drawing in 1/4 scale, you would enter “4” in
Scale.

The following table shows the number to enter in Scale field for normal drafting scales:

Master Units Standard Scale Plot Layout Scale

inches full scale 1/1 1

inches half 1:2 2

inches quarter 1:4 4

feet 1/2" to the foot 2

feet 3/8" to the foot 2.6667

MicroStation PowerDraft calculates mechanical or architectural scale for you. Click on the
magnifying glass next to Scale to enter what you want on paper to represent a length on your
design.

Note the small preview of your plot on the upper right of the dialog box. You can see how
large your plot will be on the paper and where it will start. You can shift the small rectangle,
that is you can specify where you want the Origin to be. Just edit the X and Y location in the
Origin box. You will see the small drawing shift.

2/23/07 13-117
Defining What to Print

Print dialog box icons

You can use the five icons at the top of the Print dialog box as follows.

When the selected printer is the Windows system printer, the print is sent to the printer.
When the selected printer is not the Windows system printer, the Save Print As dialog box
opens, which lets you select a location and choose a name for the print file. This file can be
copied to the relevant printer at a later time.

Preview

Opens the resizable Preview dialog box, which lets you preview the proposed print.

Maximize Print Size

Automatically fits the selected view or fenced area into as much of the printable area as
possible.

Print Attributes

Opens the Print Attributes dialog box, which lets you set various printing attributes.

Update from View

Synchronizes the printing settings to that of the model as displayed in the selected view.
Useful for updating the printing parameters after adjusting a view’s parameters. If your only
change has been to turn levels on or off, you will see this change when you preview or print
the output.

Plotfile

A Plotfile is a file that contains all of the instructions to your printer or plotter. If you create a
plotfile, nothing is plotted! You will have to leave MicroStation PowerDraft and then send
that file to a plotter by one of the ways compatible with your operating system.

If you have connected your printer to the parallel port of your computer or available on your
network, here’s how you can print right away:

Printing from Windows

If Windows printer driver is selected, drawings can be printed/plotted by the sequence: File >
Print. Printer.plt is referred to as the system printer in Windows. MicroStation PowerDraft
uses whatever graphics output device has been setup for Windows through the Windows
Control Panel.

2/23/07 13-118
Defining What to Print

To plot a color file in black and white, Select Gray Scale or Monochrome from the Color
button on the Print dialog box.

Border / Title Block

The standard borders typically are drawn in a separate design file and then either referenced
or placed as a cell. We are going to place the border by creating a cell, drawing in appropriate
real-world units so that the border scales properly when plotted. For example, in mechanical
work to be plotted full scale in inch units to an 8.5" x 11" plotter in landscape.

MicroStation PowerDraft is delivered with a number of sample border files. If you installed
MicroStation PowerDraft to the default directory, these border files will be located at
C:\…\Workspaces\System\Borders. The Borders directory has subfolders for ANSI,
Architectural, and ISO borders.

Î To place the border and title block as a cell

1 Draw a border with the desired line weight of 8" x 10.5".
2 Draw the title block.
3 Place Enter Data Fields in the title block where you want company name, title,
drawn-by, and other information to be placed, with text attributes set for each.
An Enter Data Field is a placeholder for future text input. To insert the placeholder,
just type the underbar character _ (upper case dash). The number of underbars
determines the number of characters to be entered.
4 Add above to a cell library, with all your border/title blocks.

Î To plot the drawing

1 Attach the border cell library.
2 Make the border you want active for placement and place the border cell on your
drawing.
3 From the Text tool box, select the Auto Fill In Enter Data Fields tool.
4 Click anywhere on the view.
Note the rectangle around the first field.
5 Type in the first field and press <Enter> and then type in the next field, and so on.
Note that the text you entered has the same attributes as you used when you typed in
the underbars.

) See Title Block and Borders (page 148) for referenced borders.

The most popular way to make up a composite file for printing is the following:

2/23/07 13-119
Defining What to Print

1 When finished with your work, open an empty file with units the same as your paper,
example would be inches.
2 Reference your work, applying an appropriate reference file scale, example 1 to 48 if
an architectural drawing at ¼" /ft.
3 Reference a border/title block that was prepared in paper units.

See Reference Files and Drawing Composition (page 147) for more details.

2/23/07 13-120
14 Summary of 2D and Moving On

At this point you have a good understanding of the concepts of MicroStation PowerDraft and
you have completed eight exercises that cover the MicroStation PowerDraft tools that enable
you to produce almost any technical drawing that you would ever want.

More importantly, you have learned your way around MicroStation PowerDraft so you are
prepared to develop a deeper understanding and greater skill on your own.

There is much more to learn about MicroStation PowerDraft. Where you go from here
depends on your own goals. You will want to read the rest of this book and do the exercises
to learn the basics of 3D in any case, since all industry except schematic design is moving in
that direction.

If you are keyboard oriented take note of the list of two character commands in the Appendix
(see page 163). Also, experiment with the Key-in “Browser” (Utilities > Key-in) to learn the
longer type-ins.

The following table lists some of the 2D functions that we didn’t cover and where to look to
learn more about those functions. MicroStation PowerDraft Help is excellent and you will
find everything you need there. You can print selected pages if you wish. Also, try the Help
Search command.

Selected Advanced 2D Topics

Selected Advanced 2D Functions Reference (MicroStation PowerDraft Help File)

AccuDraw & AccuSnap Help > Contents > AccuDraw & AccuSnap

Configuration variables & Workspaces Help > Contents > Setting Up Projects

Custom dimensions Help > Contents > Detailing Designs

Custom line styles Help > Contents > Menus > Element Menu

Custom multi-lines Help > Contents > Menus > Element Menu

2/23/07 14-121
Selected Advanced 2D Topics

Customizing Help > Contents > Programmed Custom

Digitizing Help > Contents > Programmed Custom

File translation Help. Then, Search for File Translation

Groups Help > Menus > Edit > Group

Images Help > Utilities > Image

Importing text Help > Menus > File > Import > Text

Models Help > Getting Started > Models

Reference Files Help > Menus > File > Reference

Tags (text tied to graphics) Help > Menus > Element > Tag

Workspaces Help > Contents > Setting Up Projects

Also, see the Appendix for more information on structuring your own class, Reference Files,
and Short cut commands.

There are a number of software packages designed to supplement MicroStation PowerDraft

which are developed by others. You may find it more economical to purchase one of these
supplemental packages than to develop it yourself.

Some tips to make good use of MicroStation PowerDraft:

1 Remember to watch the prompts and messages.
2 Practice snapping, tentative then accept, and use AccuSnap.
3 Get in the habit of referring to the tool settings window.
4 Use Reference Drawings.
5 Use AccuDraw for coordinate entry.
6 Set up your own seed files with all your standards.
7 Make heavy use of cell libraries. Purchase one, if possible.
8 When translating files:
As often as possible, just use File > Open with Type set.
Use Import/Export only when needed for control.
Reduce the file to as little as possible before translation.
Compress Files before translation.

2/23/07 14-122
Differences between MicroStation PowerDraft and AutoCAD

Differences between MicroStation PowerDraft and AutoCAD

Here are some of the key differences between AutoCAD and MicroStation PowerDraft for
those who learned first on AutoCAD:

AutoCAD MicroStation PowerDraft

new file untitled new file named and start with seed file

file must be saved file always saved

file extension is .dwg file extension is .dgn or .dwg

xref reference files

self reference not available self referencing permitted for details

64-bit floating point coordinates 64-bit floating point coordinates

unlimited layers unlimited levels

Layer Name & ByLayer standard independent attributes or ByLayer attributes

tool settings in command tool settings in tool settings window

polyline SmartLine

single purpose mouse three buttons: data, reset, snap

key in dimensions & type Enter AccuDraw: visual align, key number, no Enter

Linear Dimension: 2pts on object then witness Single-click Element Dimensioning (or similar to Acad)
depth

various trim methods IntelliTrim

commands by: Verb/Noun/Enter Verb/Noun or Noun/Verb method of commands

2/23/07 14-124
15 3D Concepts

MicroStation PowerDraft enables you to approach design from either a 2D or 3D perspective.

Basic 3D Concepts
2D is working with your design as if you were sitting at a drafting table except using the
computer to record your ideas rather than a sheet of vellum.

3D is working with a model of your ideas much as if you were building a physical model out
of plastic parts.

The seed file you select when you create a new file tells MicroStation PowerDraft whether you
will be building a 3D model or whether you will be working in 2D. For your convenience,
MicroStation PowerDraft eliminates the 3D menus when you select a 2D seed file.

If you select a 3D seed file such as seed3d.dgn, then MicroStation PowerDraft activates all of
the 3D menus for your use.

Certain types of design work are best suited to 2D, such as:
• electrical schematic diagrams
• process schematics
• 2D layouts such as sign cutting

However, most mechanical, architectural or industrial design involves products which are 3D
in nature, that is, have depth, width and height. The conventional approach has been to
reduce 3D objects to 2D by drawing views of the 3D object. While 2D drafting is still very
useful and is consistent with the way a large number of designers have been trained; there is a
marked trend towards 3D computer aided design.

The benefits of 3D for mechanical and architectural design are manifold:

• If a good 3D model is defined in the computer, drawings can be produced almost
automatically.
• When a change is made in the 3D model, the change is automatically made in the drawing
files.

2/23/07 15-125
Basic 3D Concepts

• Rendering a 3D model provides a photograph-like image of the design which can be

better understood by a broader audience. That means better communication between
members of a team: engineer or architect to customers, between office and field, etc.
• Printers are now available that can take a 3D computer model and automatically make a
3D physical model.

Before working in 3D you should understand the MicroStation PowerDraft concepts of

Chapter 1 and the fundamentals of 2D design, especially Chapters 1 through 5. In addition,
there are six new concepts to understand to become proficient in 3D:
1 The “Right Hand Rule” for coordinates
2 The 8 standard views
3 The screen axis system vs. the drawing or model axis system
4 The “Right Hand Rule” for angles
5 The View Volume
6 The Active Depth

The Right Hand Rule

You will recall from 2D that X was always positive to the right and Y was positive up the
screen.

We can look at a 3D model from different directions. To keep coordinates straight in our
mind, we use the “Right Hand Rule.” Think of your right thumb as the +X axis, your right
forefinger as +Y and your middle finger as +Z. No matter how you turn your hand or from
where you look, the axis are the same.

2/23/07 15-126
Basic 3D Concepts

Eight Standard Views

The figure shows the eight standard MicroStation PowerDraft views of a model.

Screen Axis vs. Model Axis

There are two coordinate systems available to MicroStation PowerDraft:

• The View or Screen Axis System
• The Model or Drawing Axis

The Screen Axis System is fixed, just as we learned in 2D. Positive X to the right, positive Y
up and positive Z coming out of the screen. Think of the Screen Axis System as being glued
to the physical, computer monitor. This system follows the right-hand rule.

The Model Axis System is tied to the model or the part or product we are designing, not to
how we are looking at it.

2/23/07 15-127
Basic 3D Concepts

The following figure shows the fixed view axis system and the model axis system as it would
appear in each of four views.

The Right Hand Rule for Angles

The right hand rule for rotation or angles states that an angle is positive: Grab the positive x,
y or z axis with your right hand. The direction of your fingers is the direction of a positive
angle or positive rotation.

View Volume

The View Volume is the portion of a design which can be seen in a particular view. This is
also referred to as the Display Volume or Clipping Volume.

Think of it as a box that you wrap around a portion of your design. MicroStation PowerDraft
displays everything inside the box, but, does not display parts of your design which are
outside the box, that is, clipped from view. The box is defined by the height and width of the
View and by the Display Depth. The Display Depth is defined by two screen axis Z
coordinates, for example, -10 to plus 10. These two Z coordinates can be keyed in using the

2/23/07 15-128
Lesson 29 - Understanding 3D Concepts

format DP = a, b or the two coordinates can by supplied graphically from the View Control
tool box (Tools > View Control).

Active Depth

The Active Depth is a plane parallel to the screen related to one view where you can currently
draw. Think of it as a sheet of clear plastic that you can move anywhere paralleled to your
computer screen and then you can draw or construct geometry on that plane. The location of
the active plane can be keyed in by AZ = d, or it can be set graphically from the View Control
tool box.

Let’s dig deeper into these concepts by some hands-on lessons followed by some exercises.

Lesson 29 - Understanding 3D Concepts

1 Choose File > New to create a new 3D design file to use as a scratch-pad.
2 In the New dialog box, click the Browse button and select seed3d.dgn as the seed file.
3 In the File name field, enter a file name.
You will see four views with a triad of model coordinates.
4 Set the line weight to 4.
5 From the 3D Drawing tool box, select the Place Slab tool.
To open this tool box, select Tools > Tool Boxes and from
the Tool Boxes dialog box, turn on 3D Drawing.
6 With the Place Slab tool, place a 2 x 2 x 2 slab.
7 In the AccuDraw window, set X, Y and Z to 2.

2/23/07 15-129
Lesson 29 - Understanding 3D Concepts

8 Click in the Top view and Front view to set the direction of the 3D box (slab) you are
placing. Fit View in all views.

9 From the View Control bar at the top of each window, select the Rotate View tool.
Try this in the isometric as it works differently than 2D. Using the Rotate View tool
settings, you can put any standard view in any of the four windows.
See the colored X, Y and Z in the four views. The associated arrows show the
positive direction of the model coordinate system.
10 From the Tools menu, select View Control. Right-click in the View Control tool box,
and then select Show All. This displays on tools in the tool box.
11 Select the Show Display Depth view control.
12 Click on each view and in the status bar prompt field, note the Display Depth. It
shows two screen z coordinates. The difference between them is the Display Depth.

2/23/07 15-130
Lesson 29 - Understanding 3D Concepts

The Display Volume in that view is the width and height of the view as you see it
multiplied by the display depth in the view coordinate system. -z is away from you
“inside the screen” and +z is toward you.
13 To demonstrate View Volume, from the View Control tool box, select the Set
Display Depth icon.
14 Click in the Top view to set the display depth for the Top view.
15 Manipulate the dimension lines in the isometric to make a thin volume.
Your first click in the isometric defines the Top view clipping plane closest to you.
The second click defines the clipping plane “inside the screen,” that is, away from
you. For this to work, Clip Front and Clip Back must be on (Settings > View
Attributes) for the Top view (View 1).
If the two planes are close enough, you will no longer see part of the slab you placed.
You just see points where you cut the edges of the slab. Or, if View Volume is above
the slab, you may see nothing.
16 Restore the original clipping planes (View Volume) by clicking on Fit View and then
click on the views.
Fit View expands the clipping planes so you see the whole model.
17 Draw rectangles (Place Block tool) and circles (Place Circle tool) in the Top view.
Notice where they are in the isometric.
18 Change the Active Depth (the plane where you are drawing) by clicking the Set
Active Depth tool. Click in the Top view, then in the Isometric, move the plane and
snap it to the opposite face of the slab. Draw additional circles and see them drawn
on this face of the slab.
You can use the Rotate View tool to dynamically rotate the view in any window.
19 Click on the Rotate View icon and set the Method to
Dynamic.
20 Click on one of the windows and hold down the data
button.
As you move the cursor on the screen, the view dynamically follows.

) A good OpenGL graphic card can make a huge difference as to how fast the rotation
takes place and the quality of the image displayed. Note the small dot which
represents where you originally clicked and the larger dot which is the center of
rotation.
21 You can also click the View Attributes icon on the View Control bar of any window
to open the View Attributes dialog box. In the Display option menu, change
Wireframe to Smooth Shading. Then, that window will be shaded and will remain
shaded while you use the Rotate View tool.

2/23/07 15-132
16 Precise 3D Input

In Chapter 4, we learned how to precisely input geometric data using two key-in methods
(like DX=, etc.) and AccuDraw.

The same commands apply in 3D with two additions:

1 We must enter X, Y and Z coordinates, for example XY=a,b,c.
Note the command is still XY= even though we enter Z.
2 When using coordinate key-ins, use DL= for entering relative distances in model
Coordinates. Use DX= for entering view coordinates.

AccuDraw in 3D
AccuDraw is particularly useful in 3D, however, there are a few more things to learn to use
AccuDraw effectively in 3D:
1 The AccuDraw compass must be aligned to the view in which you are working. With
AccuDraw on, if you press the letter <T>, the compass aligns to the Top View. If
you press <S>, AccuDraw aligns the compass with the Side View. If you press <F>,
the compass aligns to the Front View.
2 You can even use the AccuDraw compass in an isometric view. Just press <T> to
work in a plane aligned with the Top View, or <S> for Side View or <F> for Front
View.
3 To locate a point relative to a known point, tentative to the known point then type
<O> to establish it as the origin, just as in 2D. Then, drag the cursor in the direction
of an offset and type the distance. Then, you can drag orthogonal to the first
direction and type another offset distance. Then, click the left-mouse button.
4 To align a point under a known point, drag in the direction until AccuDraw
highlights the line, then, type <enter> to lock in that direction. You can then snap on
the known point and the length of the line will be set.

Key-in precise data is more important in 3D since it is sometimes more difficult to locate
geometry graphically.

2/23/07 16-133
AccuDraw in 3D

A typical procedure for building 3D models is to precisely key-in the coordinates of known
geometry and then to construct further geometry from the base.

Exercise 10: 3D Model of a Kite

In this exercise we will construct a 3D model of a box kite.

1 Continue in the same 3D scratch file created in Lesson 29 - Understanding 3D

Concepts (page 129).
2 Select Edit and Select All.
3 Delete all of the geometry in your file using the Delete tool.
4 Select the Place Block tool and click anywhere in front view.
5 To place a rectangle for the front face of the kite, with AccuDraw on, move the
cursor straight to the right (in x direction) and type 2 (don’t hit <Enter>).
Then move the cursor straight up (y direction) and type 2.
Click the data button.
6 Select Fit View.
Click on all four views.
The 2D View controls still work, however, using Fit View resets the display depth of
the view to just contain the current geometry.
7 Select the Copy tool from the Main tool box. Snap to the block in top view. Move the
cursor straight up. Type 2. Click the data button.
This makes a copy of the front face to save as the back face. Accudraw insures the
block moves straight up in the top view.

2/23/07 16-134
Lesson 30: Projecting 2D into 3D Models

8 Fit View again to see both blocks. Make sure the copy is right behind the first block
when viewed in the front view.
9 Select the Place Block tool again. Snap on the top left corner of the front
block in the isometric (View 2), then adjust the AccuDraw compass so it is
in the Side View (press S with focus on AccuDraw). Draw a block to the
lower left corner of the back block.
10 Draw a block on top in a similar way. Then, copy the blocks as in step 9. Snap lines
between corners to represent the ribs.
11 Select Utilities > Render > Smooth. Click on View 2 - Isometric.

Congratulations! You have completed a 3D model and you have rendered it!

Lesson 30: Projecting 2D into 3D Models

As you saw in Exercise 10: 3D Model of a Kite (page 134), you can build 3D models using
most of the commands of 2D, just drawing in the View that gives you the best access to the
geometry you need and either keying in precise coordinates or snapping to points in the
familiar way, or using AccuSnap.

MicroStation PowerDraft provides much more powerful means to create 3D models,

including starting from 3D primitives of sphere, slab and the like, or by first making a drawing
in 2D and then extruding that drawing or sweeping the drawing to make a 3D model.

The Extrude tool can be found in the 3D Drawing tool box, which can be opened by
selecting Tools > Tool Boxes and in the Tool Boxes dialog box, turning on 3D Drawing. This
is a common tool for the architect who wants to draw a floor plan and then extrude or
“project” that floor plan to make the walls on a 3D model.

The next exercise takes you through all of the stages to convert a floor plan done in a 2D file
into a 3D model. Understand that we could start in a 3D file and then skip the steps of
conversion. We will purposefully start in 2D in this exercise to learn how to convert 2D to
3D.

Exercise 11: 2D Floor Plan Converted to 3D

1 Start a new 2D file, using seed2d.dgn. Set up the working units (Settings > Design
File > Working Units) using the Format of MU:SU, Master Unit of Feet and Sub Unit
of Inches.
2 Open the Multi-line Styles dialog box (Element > Multi-line Styles).
We are going to change the multi-line so that there is no centerline.

2/23/07 16-135
Lesson 30: Projecting 2D into 3D Models

3 From the Multi-line Styles dialog box, select Style > New. Name the style and make
the spacing (offset) 0:3 and -0:3 (to have a 6" wall). Save the new style.
4 Draw the floorplan of a small garage as shown.

) Use Accudraw. Don’t draw the dimensions.

5 From the File menu, select Export > 3D. In the Save 2D to 3D dialog box, name the
file (remember the directory path). Accept all the default settings.
This saves your floorplan as another file, but in 3D format.
6 Open the file you created in step 5.
7 Using the View Groups window (docked at the bottom left hand of the screen) turn
on four views.

8 Change the view rotation of each view by using the Rotate View tool on the top of
each window so that View 1 is Top, View 2 is Isometric, View 3 is Front and View 4
is Right.
9 To arrange the views, select Window > Tile.
10 Select Fit View and click on each of the four views.
You will see your floor plan in four views.
11 From the 3D Drawing tool box, select the Extrude tool.
12 In the Extrude tool settings window, set Type to Solid.
13 Identify the multi-line, and accept. Click on the floor plan in the Isometric view and
move your hand up. See the highlighted vertical line. Type 8 for the distance to
extrude then click on the Isometric view.
14 From the View Control bar in the Isometric view, select the Display Mode Smooth
tool and then click on the view.

Congratulations! You have created a floorplan in 2D, exported it to a 3D file, extruded the
floor plan to create a 3D surface model and rendered the view.

2/23/07 16-136
Lesson 30: Projecting 2D into 3D Models

For extra credit, draw the end view of a gabled roof in the right or front view and then use the
Extrude tool to extrude the roof over the entire plan. Extrusions always are perpendicular to
the screen so pick your view correctly. You can also extrude in the isometric by adjusting the
AccuDraw compass. Experiment and you will see how it works.

You have now created a 3D model from scratch and by extruding a 2D model into a 3D
model. Note that we could have simplified this exercise by starting with a 3D file, drawing the
floorplan in the top view.

2/23/07 16-138
17 Creating and Manipulating Solid
Models
Solid modeling tools are built into MicroStation PowerDraft. Using solid modeling is much
easier than the 3D exercises of the previous chapter.

Lesson 31: Basic Approach

The basic approach in solid modeling is to choose the solid primitives, extrusions, or sweeps
that make up your design, unite those building blocks (as required) and then to modify the
primitives with features. It’s that simple. If you look at the 3D Drawing tool box, you see the
primitives included with MicroStation PowerDraft. Hold the mouse button down as you drag
the cursor across the icons in the tool box. The name of the tool displays in the status bar at
the bottom of the screen.

After you have reviewed these icons you will begin to remember where to look for a specific
function. Let’s work a small example in order for this to have more meaning.

To make the following bracket, we can see that it might have started as a 2D drawing of the
outline and then extruded for its length.

2/23/07 17-139
Lesson 31: Basic Approach

Exercise 12: Creating a U bracket

1 Select File > New.

2 In the File name field of the New dialog box, enter a file name but don’t click Save
yet.
3 Click Browse and open seed file seed3D.dgn.
4 Save the new file.
5 Select Settings > Design File.
6 In the Working Units category of the DGN File Settings dialog box, set the Master
Units to Inches.
7 Set Format to MU and Accuracy to two decimal places.
8 In the Grid category, turn off the Grid Lock.
9 Click OK to close the DGN File Settings dialog box.
Be sure to watch the tool settings so you will see the details of each command that
you select. Also, watch commands and prompts on the bottom of your screen.
10 Draw the end view of the U bracket in the front view using lines and arcs. The height
of the U bracket is 4 inches. The inside radius is 1" and the outside radius is 1.5".
11 Select the Fit View icon and click anywhere in each view so you see your completed
U cross section.
12 Select the whole U section.
13 Select the Extrude tool and in the Right or Top views, using AccuDraw, extrude a
distance of 4".
14 Use Fit View again to be sure you can see the whole bracket.
15 To confirm that Undo works with the modeling, choose Edit > Undo Extrude and
see the extrusion removed from your block. Choose Edit > Redo and put it back.
In MicroStation, you could fillet the edges, drill the bolt holes, add a boss, or any of a
number of other advanced features. With MicroStation PowerDraft, we will use our
U bracket as it is.
16 Select Utilities > Render > Smooth. Click on the isometric view and see a shaded
view of your solid model.

2/23/07 17-140
Lesson 32: Joining Primitives to Make More Complex Solids

Remember, a shaded view by itself does not make a solid model.

A 3D model is a solid model only if:
• The surfaces are represented by the actual surface, not just a bunch of polygons.
• The way that the model was constructed is stored in the computer so the
construction can be undone.
• The features are stored as features, not just the geometry that makes them up.

Your first exercise is complete and you have created a bracket from a block using extrusion.
While it seems like a lot of steps, most of the above will quickly become second nature to you.
You will be able to create 3D solid models of this magnitude in less than five minutes.

Lesson 32: Joining Primitives to Make More Complex Solids

Now that you have a feel for solid modeling with MicroStation PowerDraft, let’s take a deeper
look into the modeling tools.

The primitives are slab, sphere, cylinder, and cone. You decide the key axis, then you supply
the dimensions via AccuDraw. You can experiment with each of the primitives later.

Alternatively, you can start from a profile drawn with the 2D tools, then use one of the
extrusion tools to make that profile into a solid. These tools are Extrude and Construct
Revolution.

Let’s do a simple exercise uniting two slabs to make an “L” bracket.

2/23/07 17-141
Lesson 33: More on Features

Exercise 13: Creating an L bracket by the union of two slabs

1 File > Open and create a new file using one of the metric seed files or seed3d.dgn
and set working units to millimeters.
2 From the 3D Drawing tool box, select the Place Slab tool. Enter the length, width
and height respectively as 100, 100 and 10.
3 Reselect Place Slab and snap to the corner of the existing slab for the first point.
Then enter 100, 100, 10 with AccuDraw oriented so this slab is at right angles to the
first.
4 Use Fit View to see both slabs. Look in the Front view. The two slabs should overlap
at the bottom right corner. This makes an L bracket that is 100 mm on each leg, but
the two slabs are not connected.

With MicroStation, you could unite the two slabs into one L shaped object. You could also
select the Fillet tool, input the radius as 5 mm, select all of the edges on the front of the L.
Then, click the data button away from the part to accept.

Just that quickly you can create an L bracket with filleted edges. You can now fillet more
edges, or add hole to the bracket for mounting.

Lesson 33: More on Features

MicroStation provides six different feature tools that you can use to build your solid model:
• Fillet
• Chamfer
• Create Cut
• Thin Shell
• Modify Solid
• Taper Solid

2/23/07 17-142
Lesson 33: More on Features

With MicroStation PowerDraft, you do your fillets and chamfers with the 2D model so that
when you extrude or revolve it, there will be a smooth surface.

We have already used the fillet and chamfer in our 2D exercises. In each case the menus work
similarly to what we have done.

Exercise 14: Modify Solid in MicroStation

In MicroStation there are tools for modifying the solid once it is created.

1 Open the L bracket drawing (File > Open).

2 From the 3D Modify tool box, select the Modify Solid Entity tool.

3 In the tool settings window, turn on the Distance check box and enter 2.0.
4 Click on the vertical leg.
5 Choose the Top plane and click Accept.
6 Repeat steps 4 and 5 for the horizontal leg.

2/23/07 17-143
Lesson 33: More on Features

Exercise 15: Create a Roller bearing with mounting bracket

This exercise is more complex than the previous one, but allows you to dig deeper into the
modeling commands and gain more experience in the most frequently used commands.

1 Open a new file using the seed3d.dgn seed file.

2 From the Settings menu, choose Design File and in the dialog box that opens, select
Working Units.
3 Change the Master Unit to Inches and click OK to accept.
4 In the Front view, use the Place SmartLine tool to draw a shape that represents the
face of the roller bearing.
5 Click a point for the lower left of bracket, draw a 6" horizontal line (using
AccuDraw). Then draw vertical line 0.5". Then draw 1" to left. Then, 1.5" up. Now
Switch SmartLine to arc. Click center point 2" to left of vertical line making arc begin
at end of vertical line. Sweep 180 degrees. Switch back to lines. Draw vertical line
down 1.5". Then to left 1" Then close.
6 Now draw the large circle with a radius of 1.5".
7 From the Groups tool box (open from Main tool box), select the Create Region tool.

8 In the tool settings window, click the Flood and Locate Interior Shape icons.

Flood

Locate Interior Shape

See the lines, arc and circle highlight to indicate correct selection.

2/23/07 17-144
Lesson 33: More on Features

9 Click to accept.
10 Extrude the circle and shape 1" to make the bearing block.
11 In the Extrude tool settings window, set Type to Solid.
12 Fit View.
13 From the 3D Drawing tool box, select the Place Cylinder tool. Place the center of
cylinder in the Front view at the center of arc. Move until AccuSnap highlights the
arc and shows the x in the center. Don’t click just yet. Type the letter <O>. Move to
Top view and place a point 1" above the center of bracket. Then, back to the Front
view to set the radius to 1". Go back to the Top view and using AccuDraw, make the
cylinder 2" long.
14 Draw a line in Front view from the top of large circle to the top of cylinder. Use
AccuSnap with Keypoint snap for first point. Then, press <Enter> to lock the line
vertical before clicking on AccuSnap “x” over large arc (to keep the line vertical).
15 From the 3D Drawing tool box, select the Place Sphere tool. Click its center at the
center of the vertical line you just drew. Make it just large enough in radius to fill the
space.
16 From the Manipulate tool box, select the Construct Array tool. In the tool settings
window, set Method to Polar. Set the to 45 degrees.
17 In the Front view, first identify the ball, then snap to the center of the circle.
18 Select Utilities > Render > Smooth to see your isometric more clearly. Or, go to
Settings > Rendering > View Attributes and set the isometric view to Dynamic
Acceleration with Smooth Shading. You can then move your shaded roller bearing
using the View Rotate command.

This is a very rough approximation of a ball bearing, but as you can see we have created the
bottom bracket, the holder, the shaft and the ball bearings. This is quite a complex 3D model
to accomplish as easily as we have done it.

Modeling Summary

MicroStation is a basic parametric hybrid solid modeler. Hybrid means that it uses both
constructive solid geometry and boundary representation. Editing is easy to use.

MicroStation PowerDraft includes a limited set of 3D tools. It is intended to be a production

design drafting software, not specifically for 3D modeling. However, MicroStation
PowerDraft can be used to create interesting 3D models and can read and display any 3D
model created in MicroStation.

Modeling Hints

Here are a couple of suggestions that will help you.

2/23/07 17-145
Lesson 33: More on Features

1 Solid Modeling is still a combination of science and art. If you try one way to build a
model and it doesn’t work, try a different approach.
2 Save your model often as your modeling progresses.

To get deeper into solid modeling, you will want to upgrade to MicroStation or one of the
discipline specific products such as TriForma with Bentley Architecture, InRoads for civil
engineering, etc.

2/23/07 17-146
18 Reference Files and Drawing
Composition
Lesson 34: Reference Files
MicroStation PowerDraft’s reference file capability is one of its strongest features. It is
especially useful for project groups working on the same project. For example, the architect
works on the floor plan, the electrical designer works on the power and lighting and the
mechanical consultant works on the heating and ventilation. Each works on their own
drawing file but can reference the work of the other. When the floor plan changes, the
mechanical designer sees the results of the change the next time the drawing referencing the
floor plan is opened. This is very useful for organizing work. In addition, reference files are
very handy for the individual designer.

There are two types of files or drawings that can be used as reference files for other drawings:
• design
• raster

We will take each of these file types one at a time.

Design Reference

There are essentially three purposes for using one dgn or dwg file as a reference for another:
1 As an aid in constructing a new file.
2 For putting together sheets of details for a project.
3 As a way of handling title blocks and borders.

Construction Aid

As a drill to understand reference drawings quickly, do the following:

1 Open citymap.dgn created in Exercise 9 - City Tract Map (page 103).
2 Select File > Save As and name it cityref.dgn.
3 While you have cityref.dgn open, choose Edit > Select All and delete all of the
information in the file. Now we have an empty file with all its settings the same as
citymap.

2/23/07 18-147
Lesson 34: Reference Files

4 Choose File > Reference. In the References dialog box, select Tools > Attach and
select citymap.dgn to be attached to cityref. Accept all the defaults in Reference
Attachments Settings dialog box and click OK.
5 Experiment with the other tools. Move it, scale it, draw a fence around a portion and
clip it.

You can see how the citymap.dgn could be used by the electrical engineers or the mechanical
contractors to layout their work using the map as a construction aid. We could layout the
sewers so they are exactly in the middle of the streets. The new work would fit exactly. If
needed, we can copy elements from citymap.dgn into cityref.dgn and then those elements
become a part of cityref. However, it’s generally best to leave all the elements in citymap.dgn
so the public works have their files, the sewer engineers theirs, the electrical theirs and so on.
This way, the work can be divided on a large project. Also, when the map changes, the
engineers see that revision the next time cityref.dgn is opened.

Detail Sheets

Detail sheets are generally made of various dgn files at different scales arranged in
checkerboard fashion on a sheet of paper. Reference files are very handy for this operation.
Start with a blank file, then attach and move and scale the details to fit on the detail sheet. You
could see how this works by attaching citymap.dgn several times to cityref. Each time, move it
to a new location and scale it differently. Also, you could clip out a different portion each
time.

Title Block and Borders

Another practical use of reference files is to attach a title and border to a design file before
plotting. You will need one copy of your title block file for each combination of sheet size and
scale you will want to plot.

For example, if you have a plotter paper that is 22" by 32" in available plot space and you want
to plot at ¼" per foot, then draw your border 88' by 128'.

That the scale plots the border as follows:

¼" x 88' = 22"

¼" x 128' = 32"

Self Referencing

You may at times want to reference the active file to itself. You must first save the part of the
active file that you would like to self-reference as a saved view. Go to Utilities > Saved Views.
Select the view you would like to save, give it a name and click the Save button. To reference
this saved view, go to File > Reference. In the References dialog box, select File > Attach.
Select the active file. In the Reference Attachment Settings dialog box, select the saved view to
attach.

2/23/07 18-148
Lesson 34: Reference Files

Reference Raster

Raster files are files that are made up of dots. Each dot is called a raster or a pixel. These files
are not like dgn files that contain lines, arcs and things which are referred to as vector files. In
a vector file you know that a line is a line. In a raster file, a line is just a series of dots that are
turned on.

There are many different types of raster files. There are monochrome, continuous tone and
color files. In Monochrome files, each pixel is black or white. Continuous tone files contain
shades of grey. And, each pixel can be a different color in a color raster file. There are many
different standard formats for raster files, such as TIFF, JPEG, BMP. These are just different
methods of coding the dots. For example, if there are 100 white dots in a row, you wouldn’t
want to store 100 bits. Instead, TIFF would store a code saying there were 100 white dots.

Raster files can be stored at different resolutions. The file may be stored as 640 x 480 or 1024
x 768. The first would represent 307,200 dots. The second 786,432 dots. The more dots, the
better the raster file looks on the screen or on paper, but, the bigger the file to contain it.

Raster Reference Files

You can attach a raster file as a reference to a dgn file.

Î To attach a raster file

1 Select File > Raster Manager. In the Raster Manager dialog box, select File > Attach.
2 In the Attach Raster Reference dialog box, navigate to any raster file on your
computer. Use Search to find any file with extension .jpg or .jpeg or .tiff or .bmp.
3 Turn on Place Interactively and click OK.
4 Click on two corners of a rectangle to place the raster file in your dgn file.
In the Raster Manager dialog box, you can change the transparency and other
characteristics of the raster file.

Suppose you have a photograph of a site. You scan that into the computer. Open an empty
file for the drawing of your new structure. Attach the photo as a raster reference file with one
corner of the file exactly at 0,0. Then, measure how far to an item on the photo such as a fire
hydrant. If you know how far the hydrant really is from the first point, you can “warp” the
photo so the raster file falls exactly on that point. See Edit > Warp on the Raster Manager
dialog box.

Reference files are a very important part of MicroStation PowerDraft in real production work.
The reference file feature of MicroStation PowerDraft is one of its very strong features.

2/23/07 18-149
Lesson 35: Drawing Composition from 3D Models

Lesson 35: Drawing Composition from 3D Models

Creating Sheet models automates the creation of drawing sheets for printing of your design
drawings. This process is similar in a way to how the manual draftsperson works. Where it
differs is that instead of redrawing the model’s geometry for each view, like the manual system
requires, you simply attach views of the design model as references.

In other words, you attach as references, views of your design geometry for each plan,
elevation, section, and so on. The power of this system is that any changes made to the design
model then is reflected immediately in each affected view in the drawings. The electronic
version of the manual drawing sheet consists of:
• Sheet model— The electronic drawing sheet.
• Attached models/views — References of the design geometry.

Sheet models are created with attached references and saved views. By working with
appropriate scaling, you can always create your drawing to the correct size, and then
manipulate the output to suit your requirements. For example, with a map, you can place a
drawing within a scaled border and then print to whatever size is required. The tools in the
reference attachments simplify the process of creating sheet views in a number of ways:
• An attached view in a sheet model can be any standard (Top, Bottom, Right, Left, Front,
or Back) or any saved view of the model. Attachments can be clipped or set to display
only certain levels. The attachments that can be placed via the Attached Reference dialog
box, are primarily orthogonal and can be mirrored so no special procedures for placing
folded images are included.
• An attached view of the model can be placed in any position at any scale. Related attached
views can be grouped in a separate Sheet.
• References may be mirrored.
• The Presentation of any attachments can be set independently, for example, you can
show the Right view as hidden line.

Creating Sheet models

There is no hard and fast rule to how you create Sheet models, and display your drawing
information from your design models. Commonly, either of two methods are used, one
that scales the border to enclose the design, or the other that scales the design to fit the
border.
With both methods, for 3D work in particular, it is a good idea to have separate design
models and sheet models. This lets you keep the purely drawing information, such as text
and dimensioning, separate from the design information. Doing this reduces the
likelihood of conflicts where others, for example, wish to reference the same design
model for use in a drawing of a different scale.

2/23/07 18-150
Lesson 35: Drawing Composition from 3D Models

Î To create a new Design or Sheet model

1 From the File menu, choose Models.
The Models dialog box opens.

2 In the Models dialog box, click the Create a new model icon.
The Create Model dialog box opens.

3 From the Type option menu, choose Design, Sheet, Design From Seed or Sheet
From Seed.
4 If the Type is Design, choose 2D or 3D from the right option menu.
The Seed Model field displays the name of the seed model.
5 In the Name field, key in the required name.
6 (Optional) In the Description field, key in a brief description of the model.
7 In the Ref Logical field, key in a logical name for the model. The logical name is used
to uniquely identify the model when it is attached as a reference.
8 (Optional) Turn on Create a View Group (to create a View Group for the model).
Creating a View Group lets you change models via the View Groups window also.
9 If you will use the model as a cell, turn on Can be placed as a cell and select a cell
type.
10 Click OK.

2/23/07 18-151
Lesson 35: Drawing Composition from 3D Models

Î To name and save a view

1 Set up the source view so that the desired portion of the design is displayed and the
view attributes are as desired.
2 From the Utilities menu, choose Saved Views.
Or, from any view window’s control menu,
choose View Save/Recall. If you are using the
default function key menu, press <F6>.
The Saved Views dialog box opens.
3 In the Saved View dialog box, click the Save
View icon.
The Save View dialog box opens.

4 In the Name field, key in a name for the view.

The maximum number of characters in the name is limited to 511. Alphabetic,
numeric, and special characters are valid. Lowercase characters are interpreted as
uppercase.
5 (Optional) In the Description field, key in a description.
6 From the View list box, choose the number of the source view.
7 Click OK.

Î To attach a reference
1 From the File menu, choose Reference.
The Reference dialog box opens.
2 From the Tools menu in the Reference dialog box, choose Attach.
3 Select the file to attach the references from.
The default file is the last file referenced, which speeds the process.
4 Click Open.
The Reference Attachment Settings dialog box opens.
5 From the Orientation list, choose the desired view (for example, Top) of the
reference attachment. This view starts the layout of the sheet model.
6 If necessary, set the Scale and Nesting.

2/23/07 18-152
Lesson 35: Drawing Composition from 3D Models

7 From the Tools menu in the Reference dialog box, choose Attach and attach a border
that is contained in a border file or a border file supplied with MicroStation
PowerDraft.
8 Attach other Reference or Saved views by choosing the appropriate item from the
References dialog box menu and submenus.
9 Place the dimensions.
10 Place the text.

Î To attach a reference using a saved view

1 Open the Sheet model, if not already opened.
2 Select File > Reference.
3 From the References dialog box, select Tools > Attach.
The Attach Reference dialog box opens.
4 From the Attach Reference dialog box, select the desired file and model.
5 Select the desired view name to attach from the Attach reference settings, by
highlighting it.
6 Click OK.
The selected view is now attached to the cursor, with the outline lightly highlighted.
7 Place the view with a data point.

Î To copy a reference
1 From the References dialog box, choose Copy.

2 From the References dialog box, identify the reference to be copied.

3 Enter a data point to define the origin of the copy.
4 Enter a data point to define the destination of the copy.
5 Go back to step 2 to copy another attached view or Reset to finish.

2/23/07 18-153
Lesson 35: Drawing Composition from 3D Models

Î To detach a reference
1 From the References dialog box, select the view to detach.
2 From the Tools menu, select Detach or click the Detach Reference icon.

3 Accept the detachment.

The reference is detached and the information is removed from the drawing.

Î To move a reference
1 From the References dialog box, select the reference to move.
2 Identify an element in the attached view to be moved.
3 Enter a data point to define the origin of the move.
4 Enter a data point to define the destination.

Î To scale a reference
1 From the References dialog box, select File > Scale or click the Scale References
icon.

2 In the Scale fields of the References dialog box, key in the desired relative scale
factors.
3 Identify an element in the attached view to be scaled.
4 Identify a point to scale the object about.
5 Accept the attached view.
6 Enter a data point about which the attached view will be scaled.

2/23/07 18-154
Lesson 35: Drawing Composition from 3D Models

Î To change the presentation of a reference

1 From the References dialog box, select the view on which you wish to change the
presentation.
2 Select the Set Reference Presentation icon.

3 Select the presentation method.

4 Accept the reference.

2/23/07 18-156
19 Rendering and Animation

Advanced rendering and animation is an integral part of MicroStation and is not included as a
part of MicroStation PowerDraft.

The MicroStation rendering functions are among the leading 3D photorealistic rendering and
animation available in the CAD/CAM industry. MicroStation PowerDraft includes enough of
the rendering and animation functions to make it useful for visualizing a design, but, short of
the photorealistic functions included in MicroStation. For example, MicroStation PowerDraft
can render any model by several methods, up to what is called Smooth rendering.
MicroStation goes beyond that with more comprehensive methods such as Phong, Phong-
anti-alias, ray tracing and more. The following lessons apply to MicroStation PowerDraft only
up to its limitations but apply to MicroStation.

Rendering
Instead of the flat colors you used to draw lines, you can shade 3D objects in MicroStation
PowerDraft with the colors you used to draw the elements. You can also make the materials
transparent or translucent. In MicroStation PowerDraft, you can shade by several methods up
to Smooth shading. To learn smooth rendering, choose any 3D example file or one of the 3D
exercises you did in this book. Go to Utilities > Render > Smooth. Click on the isometric
view. Your scene will be rendered with the colors you selected. If you want a greater mix of
colors on your scene, just edit your file.

Ray Tracing and radiosity

When you render a 3D file with Utilities > Render > Smooth, you are using a rendering
program that allows you to have different colors in your scene but won’t show materials, show
shadows and highlights. In MicroStation, you not only get materials and shadows, if you want
to make the rendering look even better, you can use AntiAliasing with Phong rendering.
(Phong is the name of the inventor of this rendering algorithm.) AntiAliasing simply tries
several times to move your image around on the screen to minimize the “jaggies.” It uses a
four pass algorithm and takes four times as long as regular Smooth.

2/23/07 19-157
Animation in MicroStation PowerDraft

In MicroStation, if you want your rendering to be even better, you can select Utilities >
Render > Ray Tracing. This is a method of rendering that gives another order of realism. It
does take longer for the computer to do since it is more comprehensive. Essentially, the
difference is that Ray Tracing shows reflections of reflections of reflections and so on. That
is, every ray of light is traced. Consequently, for some models and some purposes, the extra
computer time for ray tracing may be worth it.

Radiosity is an even more sophisticated rendering technique. When used with ray tracing,
radiosity keeps better track of how light is diffused between surfaces and shows color
bleeding where one surface may tint another (like orange carpet makes an orange tint on a
white wall), as well as showing light dispersion where the reflection of an indirect light onto
other surfaces in a scene.

Animation in MicroStation PowerDraft

There are a number of ways to animate your design with MicroStation PowerDraft. The
simplest is to click on the Rotate View icon and then click in the scene and move your cursor.
Your eye point moves around the view as you move the cursor. With MicroStation, there are
many more ways to do animation. You can record animations via the Flythrough method. In
this case, you simply draw a curve in your 3D scene using a smartline or curve. Then you
direct the camera to follow that curve and either look tangentially along the curve, or usually,
have the camera focus on one point in the scene. This produces a .fli file which can then be
played back with Utilities > Image > Movie.

With Animation Producer, available in MicroStation, you can create “actors,” place them in a
scene and then the actors can be moving while the camera moves around the scene.

Coupled with photorealistic rendering, this method makes the most lifelike animations of
your scene and will wow even the most reserved of clients.

Here are a couple of simple examples for making a Flythrough and for animating actors to get
you started.

Creating a Flythrough

While not available in MicroStation PowerDraft, as a reference, here is how you would
prepare animation in MicroStation:

) Note you can change the number of ticks that each frame delays and other parameters to
control the playback. Also, when you record the flythrough, note that you can change the
resolution, the type of rendering and many other parameters.

2/23/07 19-158
Animation in MicroStation PowerDraft

Î To produce a flythrough sequence

1 Choose Utilities > Render > FlyThrough.
The FlyThrough Producer dialog box opens.

2 From the View option menu, choose the source view for the animation.
3 From the Shading option menu, choose Wireframe for “rehearsal” purposes or the
desired rendering method for a finished or nearly finished sequence.
4 (Optional) Use the other controls in the dialog box to adjust the camera settings and
set the output options (Render > FlyThrough.).
5 Define the path that the camera is to follow and the camera target.
The path can be an existing open element, or you can place an element in the design
file.
6 Preview the sequence.
Once you have adjusted the FlyThrough Producer settings and defined the camera
path, you can preview the sequence before taking the time to record all the frames.
7 Record the sequence.
8 Go to Utilities > Image > Movies, load the file you just made and play it back.

Î To define the path that the camera will travel during the sequence
1 Place a line, line string, arc, ellipse, curve, or B-spline curve to define the path the
camera is to travel. (If you do not want the path to be visible in the sequence, place
the path as a construction element, or on a separate level that is not displayed in the
source view for the sequence.)
2 From the FlyThrough Producer dialog box’s Tools menu, choose Define Path.
3 Identify the element that defines the camera path at the point at which the camera
path is to begin.

2/23/07 19-159
Animation in MicroStation PowerDraft

4 Accept the element at the point at which the camera path is to end.

Î To preview each frame in the output view

1 (Optional) To see each camera location and viewing volume for each frame along the
camera path, choose Camera from the Tools menu’s Preview submenu, in the
FlyThrough Producer dialog box.
2 From the Tools menu's Preview submenu, choose View in the FlyThrough Producer
dialog box.

Animation Producer

The Animation Producer in MicroStation works generally as follows: Sequences are produced
by first defining a set of actors and then scripting their motion. Object motion can be
controlled by specifying the position of the actors and keyframes, by defining actor paths, or
by explicitly specifying their position, orientation and scaling as a function of time or frame
number. Settings for materials and lights also can be specified as a function of time or frame
number. The simplest method is keyframing. Here you simply move the 3D object or rotate
as you wish for several of the frames which are called “keyframes.” Then, you interpolate the
difference between the positions in keyframes to make motion from one orientation to
another.

Î To animate the red block in the figure

1 In MicroStation, create a small red slab sitting on top of a larger green slab.
We will animate the red slab sliding across the green slab.
2 Select Utilities > Render > Animation.

2/23/07 19-160
Animation in MicroStation PowerDraft

The Animation Producer dialog box opens. We will use this dialog box throughout
this procedure.
3 From the Animation Settings tool box (Tools > Visualization > Animation Settings),
select the Keyframes dialog tool.
The Animation KeyFrames dialog box opens.
4 Using the Element Selection tool, select both the red and green slabs.
5 On the Animation KeyFrames dialog box, click Create.
6 Enter a name like “start” for this frame.
7 Now, deselect and then move the red slab to the middle of the green slab. Again,
select both slabs.
8 Click Create again. Name this frame “mid.”
9 Deselect again and then move the red slab to the far corner of the green slab.
10 Select the red and green slabs.
11 Click Create. Call this one “finish.”
We have created three key frames.
We must next make a script to describe the type of motion between each key frame.

Î To make the script

1 In the Animation KeyFrames dialog box, highlight the key frame named “start” and
click the Script button.
2 In the Script KeyFrame dialog box, click OK to use all defaults.
3 Do the same for “mid” and set the start time to 11.
4 Do the same for “finish” and set the start time to 21.
5 In Animation Producer dialog, make sure the view is set to the one in which you
want the animation to occur, then select Tools > Preview.
6 Click the Play button and watch the red slab move across the green slab.

By now, you should have a feel for how this works and you are ready to dig deeper into the
Help files to learn more when you have MicroStation available. There is much more to learn.
You can make the red block into an actor and have it rotate, jump up and down or morph it
into a cylinder. You can place a variety of lights where you want and much much more to
make your designs come to life.

2/23/07 19-162
Appendix

Shortcut 2D key-in commands

Key-in Result

aa= nn sets the active angle to nn

ac= cell sets the active cell to the name given, for example, “cell”

ap= cell sets the active pattern cell to the cell indicated

ar= cell sets the active cell to “cell” for relative place

as= nn sets the active scale to nn

cc= cell creates the cell in the attached library

cd= cell deletes the cell from the attached library

co= color sets the active color

cr= old, new renames a cell

df= displays the Fonts dialog box

di=dist,angle sets the distance and angle to the next data point

dl=del x, del y sets the distance to the next data point in the drawing coord

dv=view deletes the saved view indicated

dx= del x, del y similar to dl, but in the view coordinate system

ff=filename copies the fenced elements to a new design file

ft= font# sets the active font

gr= nn sets the number of units between grid references

gu=distance sets the grid spacing to the working units value

2/23/07 20-163
Shortcut 2D key-in commands

ky= nn sets the snap lock divisor to nn

lc= code sets the active linestyle

ld= level places all dimensioning information on the level

ll= nn sets the maximum number of characters for a text node (1-255)

ls= nn sets the text line spacing

lv= nn sets the active level to nn

on= nn,nn,… turns on the levels listed

off= nn,nn,… turns off the levels listed

pa= nn sets the active pattern angle to nn

pd= nn sets the active pattern spacing to nn

ps= nn sets the active pattern scale to nn

rc= library attaches the cell library

rd= file closes the current design file

sd= nn sets the stream delta to nn

sf= file moves the selected elements to a new file

st= nn sets the stream tolerance to nn

sv= name saves the current view settings under name

th= nn sets the active text height

tx= nn sets the active scale for cell as line terminator

tw= nn sets the active text width

vi= name attaches the view named

wt= nn sets the active line weight

xs= nn sets the active x scale

xy= nx, ny sets the next data point at absolute nx and ny

ys= nn sets the active y scale

2/23/07 20-164

MicroStation Training Manual 2D Level 1
50% (2)
MicroStation Training Manual 2D Level 1
296 pages
Vis
No ratings yet
Vis
226 pages
MicroStation Basic UsersV8iSs2 PDF
No ratings yet
MicroStation Basic UsersV8iSs2 PDF
266 pages
Training
No ratings yet
Training
27 pages
Microstation/J: Tutorial Workbook
No ratings yet
Microstation/J: Tutorial Workbook
438 pages
All MicroStation Tips and Tricks
100% (1)
All MicroStation Tips and Tricks
92 pages
MicroStation V8i SS3 Essentials
100% (1)
MicroStation V8i SS3 Essentials
266 pages
Plantspace Tutorial
No ratings yet
Plantspace Tutorial
168 pages
Introduction To Microstation - A Project Based Approach For Learning MicroStation V8i
No ratings yet
Introduction To Microstation - A Project Based Approach For Learning MicroStation V8i
304 pages
MicroStation V8i Essentials SS3-Full
No ratings yet
MicroStation V8i Essentials SS3-Full
289 pages
Ms Quickstartguide
No ratings yet
Ms Quickstartguide
370 pages
Micro Station Power Draft Training Guide by Bentley Systems
100% (2)
Micro Station Power Draft Training Guide by Bentley Systems
162 pages
MicroStation V8i Essentials
No ratings yet
MicroStation V8i Essentials
100 pages
Practice Workbook - Using - General - Tools
No ratings yet
Practice Workbook - Using - General - Tools
32 pages
MicroStation V8i Essentials PDF
No ratings yet
MicroStation V8i Essentials PDF
340 pages
MicroStation V8 Manual PDF
100% (1)
MicroStation V8 Manual PDF
128 pages
Dean R. Lillard, Rebekka Christopoulou-Life-Course Smoking Behavior - Patterns and National Context in Ten Countries-Oxford University Press (2015)
100% (2)
Dean R. Lillard, Rebekka Christopoulou-Life-Course Smoking Behavior - Patterns and National Context in Ten Countries-Oxford University Press (2015)
305 pages
MicroStation V8 Manual
No ratings yet
MicroStation V8 Manual
128 pages
MicroStationV8iForCADUsers TRN012280-1 0001
No ratings yet
MicroStationV8iForCADUsers TRN012280-1 0001
364 pages
Microstation v8 Manual-Desprotegido
No ratings yet
Microstation v8 Manual-Desprotegido
128 pages
Microstation: Quick Reference Guide
No ratings yet
Microstation: Quick Reference Guide
32 pages
Essential Microstation v8
No ratings yet
Essential Microstation v8
364 pages
MicroStation Manual
No ratings yet
MicroStation Manual
39 pages
MicroStation Training Guide
No ratings yet
MicroStation Training Guide
72 pages
Defect Prediction in Software Development & Maintainence
From Everand
Defect Prediction in Software Development & Maintainence
Rudra Kumar
No ratings yet
Power Draft V 8 I Quick Start Guide
No ratings yet
Power Draft V 8 I Quick Start Guide
40 pages
Improved Performance Research Integration Tool User Guide - Version 4.6
From Everand
Improved Performance Research Integration Tool User Guide - Version 4.6
Beth Plott
No ratings yet
Bentley Microstation Training Presentation
100% (1)
Bentley Microstation Training Presentation
30 pages
MicroStation Basic 2D Graphics
No ratings yet
MicroStation Basic 2D Graphics
70 pages
Getting Started in MicroStation
No ratings yet
Getting Started in MicroStation
59 pages
Vilfredo Pareto Beyond Disciplinary Boundaries
100% (2)
Vilfredo Pareto Beyond Disciplinary Boundaries
214 pages
Microstation Guide
No ratings yet
Microstation Guide
158 pages
Microstation Part 1-1.1
No ratings yet
Microstation Part 1-1.1
13 pages
User Interface: Chapter Four
No ratings yet
User Interface: Chapter Four
8 pages
Microstation Part 1.1
No ratings yet
Microstation Part 1.1
7 pages
Basic MicroStation Student Training Outline V8i
No ratings yet
Basic MicroStation Student Training Outline V8i
7 pages
03 - Drawing in MicroStation
No ratings yet
03 - Drawing in MicroStation
7 pages
Advanced Techniques in Power System Protective Relaying PDF
No ratings yet
Advanced Techniques in Power System Protective Relaying PDF
332 pages
Microstation and Microstation Powerdraft
No ratings yet
Microstation and Microstation Powerdraft
4 pages
Microstation Sample EDocument
No ratings yet
Microstation Sample EDocument
25 pages
Course MicroStation V8i Everything 3D
No ratings yet
Course MicroStation V8i Everything 3D
1 page
Programmable Logic Controller
67% (3)
Programmable Logic Controller
214 pages
VLSI Layout Using Microwind: Kishore C Acharya
No ratings yet
VLSI Layout Using Microwind: Kishore C Acharya
27 pages
(8Hrs X 2.5 Days 20Hrs) : Content For Microstation
No ratings yet
(8Hrs X 2.5 Days 20Hrs) : Content For Microstation
3 pages
Hacking for Beginners: Comprehensive Guide on Hacking Websites, Smartphones, Wireless Networks, Conducting Social Engineering, Performing a Penetration Test, and Securing Your Network (2022)
From Everand
Hacking for Beginners: Comprehensive Guide on Hacking Websites, Smartphones, Wireless Networks, Conducting Social Engineering, Performing a Penetration Test, and Securing Your Network (2022)
Ross Menzie
No ratings yet
IGNOU BCA Operating System Concepts and Networking Management Previous Year Solved Papers MCS 022
From Everand
IGNOU BCA Operating System Concepts and Networking Management Previous Year Solved Papers MCS 022
Manish Soni
No ratings yet
Computer Aided Architectural Design: A Summary of Microstation Commands
No ratings yet
Computer Aided Architectural Design: A Summary of Microstation Commands
11 pages
The Stress-Free Guide to Parenting a Child With ADHD: Effective and Proven Strategies for Alleviating Anxiety and Forming Strong Bonds Without the Hassle
From Everand
The Stress-Free Guide to Parenting a Child With ADHD: Effective and Proven Strategies for Alleviating Anxiety and Forming Strong Bonds Without the Hassle
Regina Michaels
No ratings yet
The MicroStation Training Manual 2D Level 1 Contai
No ratings yet
The MicroStation Training Manual 2D Level 1 Contai
7 pages
Global Vector Control Response 2017-2030: Fourth Draft (Version 4.3)
No ratings yet
Global Vector Control Response 2017-2030: Fourth Draft (Version 4.3)
50 pages
The Beginner’s Guide to Unreal Engine Building Complete Games: The Beginner’s Guide to Unreal Engine, #3
From Everand
The Beginner’s Guide to Unreal Engine Building Complete Games: The Beginner’s Guide to Unreal Engine, #3
Steven Mcananey
No ratings yet
AOCL1731482039864 Assignment
No ratings yet
AOCL1731482039864 Assignment
4 pages
PLC Programming & Implementation: An Introduction to PLC Programming Methods and Applications
From Everand
PLC Programming & Implementation: An Introduction to PLC Programming Methods and Applications
Ojula Technology Innovations
No ratings yet
Course Outline - Autocad 2006 2D & 3D Training Series:: Approx. 18 Hrs. of Training
No ratings yet
Course Outline - Autocad 2006 2D & 3D Training Series:: Approx. 18 Hrs. of Training
15 pages
Introduction to N.C.M., a Non Contact Measurement Tool
From Everand
Introduction to N.C.M., a Non Contact Measurement Tool
Dennis R. Branch
No ratings yet
Creo Parametric 6.0 for Designers, 6th Edition
From Everand
Creo Parametric 6.0 for Designers, 6th Edition
Prof. Sham Tickoo
No ratings yet
Anshu Yadav Rakesh Kataria Rituparna Neog Subhasmita Panigrahi Nift, Mfm-2 SEM
No ratings yet
Anshu Yadav Rakesh Kataria Rituparna Neog Subhasmita Panigrahi Nift, Mfm-2 SEM
34 pages
MicroStation V8i Essentials
No ratings yet
MicroStation V8i Essentials
2 pages
A Technical Excellence Framework for Innovative Digital Transformation Leadership
From Everand
A Technical Excellence Framework for Innovative Digital Transformation Leadership
Dr Mehmet Yildiz
5/5 (2)
Softstarters Type PSTX30... PSTX1250: Installation and Commissioning Manual
No ratings yet
Softstarters Type PSTX30... PSTX1250: Installation and Commissioning Manual
162 pages
HKN-MST-EL-0037 - Rev - B - Status A
No ratings yet
HKN-MST-EL-0037 - Rev - B - Status A
25 pages
SolidWorks 2015 Learn by doing-Part 1
From Everand
SolidWorks 2015 Learn by doing-Part 1
Tutorial Books
4.5/5 (11)
IN DataSheetForInstruments
No ratings yet
IN DataSheetForInstruments
8 pages
HWX Manual PDF
No ratings yet
HWX Manual PDF
67 pages
HWX Manual PDF
No ratings yet
HWX Manual PDF
67 pages
Lesson Colleges Uni Oxford
No ratings yet
Lesson Colleges Uni Oxford
5 pages
Consumer Behaviour in Selecting Mobile Phones
No ratings yet
Consumer Behaviour in Selecting Mobile Phones
24 pages
Chem JUJ K1 K2 K3 Skema Jawapan SET 2
33% (6)
Chem JUJ K1 K2 K3 Skema Jawapan SET 2
18 pages
Areva - HWX VCB - Installation Operation & Maintenance Manual
81% (16)
Areva - HWX VCB - Installation Operation & Maintenance Manual
16 pages
Microstation Software Syllabus
No ratings yet
Microstation Software Syllabus
3 pages
Group Work in The Classroom: Types of Small Groups
No ratings yet
Group Work in The Classroom: Types of Small Groups
22 pages
311l Testing Procedure
0% (1)
311l Testing Procedure
21 pages
Glossary of Mathematical Terms (CSTM 0120)
No ratings yet
Glossary of Mathematical Terms (CSTM 0120)
6 pages
Darrenpikulresume
No ratings yet
Darrenpikulresume
4 pages
Cibano 500 PTM User Manual Enu
No ratings yet
Cibano 500 PTM User Manual Enu
238 pages
A.) B.) C.) D.)
No ratings yet
A.) B.) C.) D.)
4 pages
Commissioning PSTX Manual
No ratings yet
Commissioning PSTX Manual
162 pages
DP-600: Implementing Analytics Solutions Using Microsoft Fabric Exam Preparation
From Everand
DP-600: Implementing Analytics Solutions Using Microsoft Fabric Exam Preparation
Georgio Daccache
No ratings yet
Maritime Thesis
No ratings yet
Maritime Thesis
32 pages
Science Social Studies 2nd Quarter Lesson Plans
No ratings yet
Science Social Studies 2nd Quarter Lesson Plans
4 pages
Factual Description
No ratings yet
Factual Description
14 pages
Song Analysis Rakan Zaid M XI-H
No ratings yet
Song Analysis Rakan Zaid M XI-H
2 pages
Eoies Task12 B2.2 Cte
No ratings yet
Eoies Task12 B2.2 Cte
7 pages
NCM 109L Guidelines On Presentation of The Case Study
No ratings yet
NCM 109L Guidelines On Presentation of The Case Study
1 page
How Does Society Influence Literature? How Does Literature Influence Society?
No ratings yet
How Does Society Influence Literature? How Does Literature Influence Society?
16 pages
Science 5 S5LT-IIb2
100% (1)
Science 5 S5LT-IIb2
30 pages
Visionary Leadership: Great Video On The 3 Most Important
No ratings yet
Visionary Leadership: Great Video On The 3 Most Important
21 pages
Staad Pro v8i for beginners
From Everand
Staad Pro v8i for beginners
T.S.Sarma
4/5 (23)
REF615 Relays
100% (2)
REF615 Relays
24 pages
Electrical Testing Skills
0% (1)
Electrical Testing Skills
2 pages
SEL751 Protection Relay Commands
No ratings yet
SEL751 Protection Relay Commands
3 pages
Techniques & Methods in Sensory Evaluation
No ratings yet
Techniques & Methods in Sensory Evaluation
37 pages
Lov Voltage Air Circuit Breakers
No ratings yet
Lov Voltage Air Circuit Breakers
29 pages
Class Program: General Pantaleon Del Rosario Elementary School
No ratings yet
Class Program: General Pantaleon Del Rosario Elementary School
3 pages
Practice Problems in Statistics and Data Reduction
From Everand
Practice Problems in Statistics and Data Reduction
Rahul Basu
No ratings yet
8 Excitation Current Test (Yblood)
100% (1)
8 Excitation Current Test (Yblood)
77 pages
Lesson-Plan-Template - COURSERA
100% (2)
Lesson-Plan-Template - COURSERA
2 pages
Test Modes of Doble Test Equipment: Knowledge Is Power
No ratings yet
Test Modes of Doble Test Equipment: Knowledge Is Power
23 pages
Test Modes of Doble Test Equipment: Knowledge Is Power
No ratings yet
Test Modes of Doble Test Equipment: Knowledge Is Power
23 pages
Static Balancing
No ratings yet
Static Balancing
4 pages
AC DC Drives
No ratings yet
AC DC Drives
13 pages
6c Autotransformer
100% (1)
6c Autotransformer
10 pages
Differential Calculus
No ratings yet
Differential Calculus
9 pages
Homi Bhabha Stage 1 2018 STD 6th Answer Key
No ratings yet
Homi Bhabha Stage 1 2018 STD 6th Answer Key
1 page
Maintenance Instructions For Chemline 3/8" - 1-1/2" SB Series Pressure Relief Valves
No ratings yet
Maintenance Instructions For Chemline 3/8" - 1-1/2" SB Series Pressure Relief Valves
3 pages
Solidworks 2018 Learn by Doing - Part 3: DimXpert and Rendering
From Everand
Solidworks 2018 Learn by Doing - Part 3: DimXpert and Rendering
Tutorial Books
No ratings yet
Crop Tool and Lasso Tool Lesson Plan
No ratings yet
Crop Tool and Lasso Tool Lesson Plan
2 pages
Testing For Current Transformer Parameters
No ratings yet
Testing For Current Transformer Parameters
2 pages
SOLIDWORKS 2017 Learn by doing - Part 3
From Everand
SOLIDWORKS 2017 Learn by doing - Part 3
Tutorial Books
No ratings yet
Software Testing Interview Questions You'll Most Likely Be Asked
From Everand
Software Testing Interview Questions You'll Most Likely Be Asked
Vibrant Publishers
No ratings yet