THE SMOOTH OPERATION OF THE EFFICIENT LUBRICANT TESTING LAB

Avio® 500 ICP-OES Oils LPC 500™ Liquid Particle Counter OilPrep™ 4/8 Oil Diluters Clarus® 590/690 GC
• Vertical plasma torch ensures fast, stable • Inflow sensor measuring particle size and count • High speed dilution of oil samples with a solvent • Fast fuel analysis with unique PreVent
operation, dependable results, and low cost as the sample makes its way to the Avio 500 • Preparation for particle counting by SPOS and backflush technology
per analysis • No additional sample preparation required elemental analysis by ICP-OES • Robust, integrated liquid autosampler provides reliability
• Patented Flat Plate™ plasma technology uses • Combined sample-to-sample analysis of 45 sec • Sample throughput between 200 and 500 with small sample sizes
half the argon of load-coil systems with the • Smallest automated particle counter footprint samples per hour • Deeper, more specific insights into the state of your oil
same robust plasma in the industry • Detection of potentially damaging compounds
• Simultaneously collects data on more than • Precise results on fuel or coolant contamination levels
73 elements (UV and visible wavelengths) in • More precise and effective scheduling of
seconds for exceptional sample throughput preventative maintenance
• Complies with: ASTM D5185, D4951 • Complies with ASTM D7593
and D6130
PerkinElmer Consumables
• Engineered for your instruments
• Tested and validated to ensure accurate,
repeatable results, on-time, every time
• Designed to deliver reliable
performance, control operating costs
and maximize uptime

Power Conditioner Teledyne CETAC Oils 7400 OilExpress™ 4 Oil Condition Spectrum Two™ FT-IR TurboMatrix™ Headspace
• Ensures a stable power supply Autosampler with Dedicated Monitoring System Lubricant Analysis System Sampler for GC
• Recommended for most instrumentation Sample Introduction Systems • Automated FT-IR analysis of oils • User-friendly design with dedicated in-service • Determines glycol contamination in
• Provides clean power at 120, 208, or 240 VAC in-service oils
• Detection of degradation and contamination lubricants analysis protocols
• Oils 7400 Autosampler for easy switching between oil properties of lubricating fluids • Clear, high-quality results, regardless of the • Complies with ASTM D7922
and coolant testing • Provides undiluted samples of used oil to level of expertise
- Features mixing paddle to stir sample prior to analysis the Spectrum Two FT-IR • Designed to handle demanding
• ASXpress Plus for higher throughput: 2 samples/min • Sample throughput of up to 100 samples quantitative applications
for 23-element analysis per hour • Easy setup and reporting to get your lab
• Particle Xpress for LPC 500 coupling to Avio 500, • Complies with: JOAP, ASTM E2414 and up and running faster
offering particle and elemental analysis in the same run D7418
- Features switching valve with syringe assist

www.perkinelmer.com/lubricants
Copyright ©2016-2019, PerkinElmer, Inc. All rights reserved. PerkinElmer® is a registered trademark of PerkinElmer, Inc.
All other trademarks are the property of their respective owners. 014443A_01 PKI