Scribd Logo
Upload

Welcome to Scribd!

  • 86 views

    ct-2000 Viscometer Bath

    Uploaded by

    Jesse
    The CANNON CT-2000 is a constant temperature bath that maintains temperatures between 10-150°C for applications like viscosity measurements. It features microprocessor control, a built-in platinum thermometer for monitoring the bath temperature display, and ports for data acquisition. The bath chamber holds up to seven glass viscometers and maintains temperature stability to within 0.01°C from 20-100°C and 0.03°C outside that range through proportional control of heating elements and a stirrer. Safety features include over-temperature detection that cuts power until manually reset.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    ct-2000 Viscometer Bath

    Uploaded by

    Jesse
    86 views2 pages
    The CANNON CT-2000 is a constant temperature bath that maintains temperatures between 10-150°C for applications like viscosity measurements. It features microprocessor control, a built-in platinum thermometer for monitoring the bath temperature display, and ports for data acquisition. The bath chamber holds up to seven glass viscometers and maintains temperature stability to within 0.01°C from 20-100°C and 0.03°C outside that range through proportional control of heating elements and a stirrer. Safety features include over-temperature detection that cuts power until manually reset.

    Original Title

    ct-2000 Viscometer bath

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The CANNON CT-2000 is a constant temperature bath that maintains temperatures between 10-150°C for applications like viscosity measurements. It features microprocessor control, a built-in platinum thermometer for monitoring the bath temperature display, and ports for data acquisition. The bath chamber holds up to seven glass viscometers and maintains temperature stability to within 0.01°C from 20-100°C and 0.03°C outside that range through proportional control of heating elements and a stirrer. Safety features include over-temperature detection that cuts power until manually reset.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    86 views2 pages

    ct-2000 Viscometer Bath

    Uploaded by

    Jesse
    The CANNON CT-2000 is a constant temperature bath that maintains temperatures between 10-150°C for applications like viscosity measurements. It features microprocessor control, a built-in platinum thermometer for monitoring the bath temperature display, and ports for data acquisition. The bath chamber holds up to seven glass viscometers and maintains temperature stability to within 0.01°C from 20-100°C and 0.03°C outside that range through proportional control of heating elements and a stirrer. Safety features include over-temperature detection that cuts power until manually reset.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    CANNON ®

    INSTRUMENT COMPANY
    4Microprocessor-Controlled
    Temperature Regulation to 150°C
    4Built-in Platinum Resistance Thermometer
    4On-Screen Temperature Monitoring

    The CANNON CT-2000 Constant Temperature Bath maintains the


    accurate control required by ASTM D 445 for kinematic viscosity
    measurements. Within the range of 20 to 100°C temperature is
    controlled to 0.01°C; outside that range, temperature stability is
    controlled to within ± 0.03°C.
    Setting Temperature
    A front panel keypad permits convenient temperature selection to
    two decimal places at any temperature from +10°C to 150°C.
    The built-in platinum resistance thermometer continuously monitors
    bath temperature and displays it digitally on a four line by twenty
    character back-lit liquid-crystal screen. Either Celsius or Fahrenheit
    display of temperature may be selected. On power-up, the CT-2000
    performs an automatic self-test of its circuits.
    The CT-2000 also features RS-232 and RS-485 communication ports
    which permit data acquisition and networking via an external
    computer. Several baths may be networked to a single computer.
    CANNON CT-2000 Constant Temperature Bath
    Bath Features
    The bath chamber is a cylindrical clear Pyrex® vessel 300 mm (12 inches) in diameter x 300 mm (12 inches) high.
    A stainless steel baffle coated with white Teflon is located in the center of the bath to provide a good background for
    viewing viscometers. Two fluorescent lamps illuminate the interior of the bath brightly and uniformly, without glare.
    Twin heating elements inside the bath rapidly heat the medium to any desired temperature within the range. A cooling
    coil, when connected to tap water or a cooling system, permits operation near ambient temperature. The cooling coil
    or an accessory cooling unit (CBC-100) is required for bath operation below ambient.
    The top cover contains seven round holes 51 mm (2 inches) in diameter. Up to seven glass capillary viscometers (in
    holders) can be placed in the bath. Two additional holes 10 mm (p-inch) in diameter are provided for thermometers.
    A solid-state control circuit equipped with a stainless steel-encased thermistor provides proportional control
    of temperature. A motor driven stirrer ensures a uniform temperature throughout the bath. The entire electrical control
    system is located in a convenient drawer for easy access if adjustment or repair is necessary.
    All wetted parts of the bath are made of stainless steel, glass, or Teflon®. The bath housing is fabricated from heavy
    aluminum and coated with a corrosion-resistant epoxy finish. The top cover consists of three parts: a stainless steel top
    surface, an insulating layer, and a bottom stainless steel heat reflector.
    The bath is designed to use water or oil (not supplied). Viscometers, holders, bath oil and thermometers must
    be purchased separately.
    Safety Features
    There are multiple safety features. A thermistor in the bath senses any over-temperature fault condition. If such
    a condition occurs, all power is removed from the bath until an operator resets the over-temperature limit control
    circuit. A second safety feature cuts power to the heaters if the control thermistor is disconnected. A liquid-level sensor
    prevents the control circuit from heating the bath until the safe operating level is attained. The bath heaters are
    automatically turned off when the bath liquid drops below the minimum safe level.

    CT-2000 Constant Temperature Bath Specifications Order Information


    Size: 438 mm wide x 464 mm deep x 584 mm high Catalog # Item Description
    (17.3 x 18.3 x 23 inches)
    9726-A30 CT-2000, 100-130 VAC, 50/60 Hz, 1400 watts
    Bath Volume: 17 liters (4.5 gallons)
    9726-A35 CT-2000F, 200-250 VAC, 50/60 Hz, 1400 watts
    Weight: 51.4 kg (113 lbs) without bath fluid
    Shipping Weight: 60 kg (131 lbs) (total/two boxes)
    Electrical: Specify exact line voltage when ordering

    CANNON INSTRUMENT COMPANY • 2139 HIGH TECH ROAD • STATE COLLEGE • PA • 16803 • USA
    800-676-6232 • 814-353-8000 • Fax 814-353-8007 • [email protected] • www.cannoninstrument.com

    You might also like