OSS Equipment Fluids Section

EQUIPMENT FLUIDS
Oils - Diesel Engine Oil

Health and Safety
Under normal conditions of intended use, these products do not pose a risk to health. Excessive exposure may result in eye, skin
or respiratory irritation. Always observe good hygiene measures. Read and understand the Material Safety Data Sheet (MSDS)
before using this product. For a copy of the MSDS, visit us on the web at www.catmsds.com.
Cat DEO™
Recommended Use
• Heavy-duty diesel made by other manufacturers that recommend API CI-4, CI-4
Plus, and CH4. See “Typical Characteristics” for more information.
• Automotive gasoline engines that require API SL or SJ category oils. See “Typical
Characteristics” for more information.
• Cat earth moving, commercial, marine and on-highway truck diesel engines, ex-
cluding 3600, C280, 3126 and 3116 MUI Marine and MaK™ diesel engines. The
3116 and 3126 MUI Marine diesel engines with closed crankcase ventilation sys-
tems should use Cat SAEO™
Discover the Difference
• Cat DEO is developed, tested and approved by Caterpillar to meet the same high
standards as all genuine Cat parts.
• Factory-Fill - Used as standard factory-fill for Cat machines.
• Increased Engine Life - Resists oxidation and prevents build-up on deposits on
pistons and rings.
• Extended Drain Intervals - Extends oil drain intervals while providing excellent en-
gine protection and performance when used in conjunction with out S•O•SSM
Services oil analysis program.
• Proven Performance - Tested thoroughly in Cat diesel engines including Cat en-
gines with ACERT™ Technology to ensure excellent engine life and performance.
• Long-Lasting Protection - Improved soot control and enhanced shear stability en-
able oil to maintain proper viscosity for longer operating periods in Cat engines
with ACERT Technology, especially those equipped with HEUI™ systems.
Typical Characteristics(1)
Canada, Mexico Canada, Mexico Egypt and
Location Worldwide Worldwide and United States and United States Brazil Brazil Saudi Arabia
SAE Viscosity Grade SAE 15W-40 SAE 10W-30 SAE 15W-40 SAE 10W-30 SAE 15W-40 SAE 10W-30 SAE 15W-40
API Service Classifications CI-4, CH-4 CI-4, CH-4 CI-4 PLUS, CI-4, CH-4 CI-4, CH-4 CI-4, CH-4 CI-4, CH-4
CI-4, CH-4
API Service Classifications SL SL SL SL SL SL SL
-Gasoline
ACEA Classifications B3/A2/ E7 E7 E7 E7 E5
Volvo Performance Level VDS-3 VDS-2 VDS-3 VDS-3 VDS-3 VDS-2
MB Performance Level MB228.3 MB228.3
Cummins Performance Level CES 20071/72/ CES 20071/76 CES 20071/76 CES 20071/76/78 CES20071/72/ CES 20071/76 CES 20071/72/
76/77 76/77 76/77
Mack Performance Level EO-M Plus EO-M PLus EO-NPP, EO-M Plus EO-M Plus EO-M Plus EO-M Plus
EO-M PLus
1 The values shown are typical values and should not be used a quality control parameters to either accept or reject product. Specifica-
tions are subject to change without notice.
242
Cat DEO™ (Cont'd.)
Canada, Mexico Canada, Mexico Egypt and
Location Worldwide Worldwide and United States and United States Brazil Brazil Saudi Arabia
MAN Performance Level M3275 M 3275
RVI Performance Level RLD RLD
Canada, Mexico and Canada, Mexico Egypt and Saudi

Worldwide Worldwide United States and United States Brazil Arabia
Location 15W - 40 10W-30 15W - 40 10W-30 15W - 40 15W - 40
Flash Point, C (ASTM D92) 230 222 224 220 220 240
Pour Point, (ASTM D97) -30 -36 -30 -33 -33 -33
SAE Viscosity Grade SAE 15W-40 SAE 10W-30 SAE 15W-40 SAE 10W-30 SAE 15W-40 SAE 15W-40
Viscosity cSt 103 76 120.5 76 105 105
@ 40C (ASTM D445)
Viscosity cSt @ 100C 14.2 11.5 15.5 11.5 14.4 14.0
(ASTM D445)
Viscosity Index 135 144 135 145 141 135
(ASTM D2270)
Sulfated Ash, 1.3 1.3 1.3 1.3 1.1 1.2
wt. (ASTM D874)
TBN (ASTM D2896) 11.3 10.4 10.4 10.4 10.6 10.3
Zinc, wt. (ASTM D4951) 0.146 0.146 0.146 0.146 0.133 0.123
Gravity 16C API (ASTM D287) 29.3 31.3 30 31.7 28.7 29
Gravity 16C Specific 0.88 0.87 0.88 0.87 0.88 0.88
English Volume Metric English Volume Metric

(gal) Volume (L) Qty. Part Number(3) (gal) Volume (L) Qty. Part Number(3)
DEO 10W-30 — 1 — 123-4077
5 — — 3E-9709 — 4 — 3E-9902
55 — — 3E-9708 — 5 — 3E-9901
Bulk — — 155-6198 — 18 — 3E-9900
— 5 — 335-9830 — 19 — 3E-9849
— 18 — 283-1709 — 20 — 3E-9848
— 20 — 3E-9844 — 60 — 121-4038
— 200 — 130-7055 — 200 — 3E-9842
— 208 — 3E-9707 — 205 — 3E-9841
— 1,000 — 148-3539 — 208 — 3E-9840
— 1,100 — 384-8146 — 900 — 381-7213
DEO 15W-40 — 1,000 — 3E-9838
1 QT — 4 3E-9715 — 1,040 — 201-0775
1 — — 248-7518 — 1,100 — 384-8147
5 — — 3E-9713 — 2,000 — 120-5285
55 — — 3E-9712 — 10,000 — 119-5131
Bulk 1G — — 155-6199
2 The values shown are typical values and should not be used a quality control parameters to either accept or reject product. Specifica-
3 Part numbers listed below are not available in all regions. See your Cat dealer for part numbers appropriate for your region.
243
Cat DEO Monograde
For Cat 3600 Series Diesel Engines
Recommended Use
• Cat DEO Monograde is recommended for use in 3600 series diesel engines operating on distillate diesel fuels.
• Cat DEO Monograde is recommended for older Cat engines equipped with precombustion fuel injection systems that permit
the use of American Petroleum Institute CD or CF oil.
• Cat DEO Monograde can be used with low-sulfur diesel fuel and protects Cat engines operating on higher sulfur diesel fuels
(3600 Series engines operating on fuel containing up to 1.30% sulfur, and precombustion engines operating on fuel containing
up to 0.065% sulfur fuel.)
• Cat DEO Monograde is developed, tested and approved by Caterpillar to meet the same high standards as all Genuine Cat
Parts.
• Increased Engine Life — Resists oxidation and prevents build-up of deposits on pistons and rings.
• Extended Drain Intervals — Extends oil drain intervals while providing excellent engine protection and performance when
used in conjunction with our S•O•S Services oil analysis program.
• Proven Performance — Tested in Cat 3600 Series diesel engines worldwide.
SAE Viscosity Grade SAE 40(5)
API Service Classification CF(6)
CCMC D3
Caterpillar Performance Level (engine) 1M-PC
Flash Point, °C (ASTM D92) 215 min
Pour Point, °C (ASTM D97) -18 max
Viscosity cSt @ 40° C (ASTM D445) 132
Viscosity cSt @ 100° C (ASTM D445) 14.7
Viscosity Index (ASTM D2270) 112
Sulfated Ash, % wt. (ASTM D874) 1.4
TBN (ASTM D2896) 12.0
Zinc, % wt. (ASTM D4951) 0.10
Gravity @ 16° C API (ASTM D287) 25.5
Phosphorus, % wt. (ASTM D1091) 0.09
English Volume (gal) Metric Volume (L) Part Number English Volume (gal) Metric Volume (L) Part Number
SAE 40 SAE 40
5 – 416-9247 – 200 9X-8528
55 – 416-9246 – 208 9X-6463
Bulk 1G – 155-6202 – 1000 9X-6272
– 20 7X-7843 – Bulk 1L 8C-3703
4 The values shown are typical values and should not be used as quality control parameters to either accept or reject product. Specifica-
5 Passes FZG DIN 51354-2 A/8, 3/90 FLS 12.
6 Can be used in applications where the obsolete API CD classifi cation oil is recommended.
244
Cat DEO Cold Weather
Best Performance and Protection for Cold Weather Applications
Cat DEO Cold Weather is a synthetic diesel engine oil designed with an extremely sta-
ble formula tailored to provide long-lasting engine protection over a wide temperature
range, -40°F (-40°C) to 104°F (40°C). The backwards compatibility of Cat DEO Cold
Weather makes it well suited for mixed fleets of new and old machines. When used in
engines equipped with emissions reduction technologies, Cat DEO Cold Weather deliv-
ers the full life and performance of after treatment components. Cat DEO Cold Weath-
er exceeds the performance requirements of Cat ECF-3 (Engine Crankcase Fluid
Specification) and the API CK-4 and API SM categories.
Cat DEO Cold Weather takes the trouble out of starting your engine when temperatures
are very low. The special formulation flows readily at low temperatures, reducing startup wear and improving fuel
economy in some applications. The outstanding thermal stability and oxidation resistance of Cat DEO Cold Weather
keeps engine components cleaner, further reducing wear. In testing, Cat DEO Cold Weather was shown to reduce
piston deposits by more than 30% and to have more than 80% better viscosity control then ECF-3 standards. These
results demonstrate that Cat DEO Cold Weather will help lower you owning and operating costs through fewer oil
changes and repairs.
Benefits
• Easier Engine Starts - Excellent low temperature performance eliminates hard starts
• Reduced Engine Wear - Improved detergents keep engine components cleaner
• Minimized Deposits - Reduced oxidation breakdown and thermal degradation improves stability which minimizes
the formation of deposits, sludge, and varnish
• Full Component Life - Specially designed additives deliver superior engine protection while supporting consistent
emissions performance and extending the life of after treatment system components.
• Extended Drain Intervals - When regular S•O•S Oil Analysis is utilized, long oil life is possible
Applications
Cat DEO Cold Weather is the preferred diesel engine oil for low temperature applications.(7) Cat DEO Cold Weather
supports consistent emissions performance in engines equipped with after treatment devices designed to meet.(8)
• 2007/ 2010 On-Highway exhaust emissions standards (US)
• Tier 4 (US)
• Stage IIIB/IV (EU)
• Step 4 (Japan)
7 Oil recommendations for 3116 and 3126 MUI Marine and MaK diesel engines can be found in the Operations & Maintenance Manual
(OMM).
8 Aftertreatment devices can include Diesel Particulate Filters (DPF), Diesel Oxidation Catalyst (DOC), Selective Catalytic Reduction (SCR)
and/or Lean NOx Trap (LNT).
245
Cat DEO Cold Weather (Cont'd.)
SAE Viscosity Grade 0W-40
API Service Classification Diesel: CK-4, CI-4 PLUS/CI-4, CH-4; Gasoline: SM
OEM Performance Cummins CES 20081, Mack EO-N PP’03
Viscosity cST @ 40°C (ASTM D445) 87
Viscosity cST @ 100°C (ASTM D445) 15.2
Viscosity Index (ASTM 2270) 186
Phosporous, % wt (ATM D4951) 0.111
Sulfur, % wt. (ASTM D2622) 0.4
TBN (ASTM D2896) 7.8
Zinc, % wt (ASTM D4951) 0.121
Gravity @16°C API (ASTM D287) 36.2
Specific Gravity 16°C 0.844
SAE 0W-40 SAE 0W-40
1.1 4 361-0923 — 1000 444-3551
— 5 347-8468 — Bulk 347-8471
5.3 20 347-8469
54.2 205 347-8470
246
Cat DEO-ULS
(For the United States, Canada, and Mexico only)
Recommended Use
• Cat DEO-ULS exceeds the performance requirements of Cat ECF-3 (Engine Crankcase Fluid
Specification) and API CK-4.
• Preferred for all 2007 on-highway and non-road Tier 4 U.S. EPA engines and Euro Stage IIIB
engines equipped with after treatment systems using 15-pm sulfur fuel
• May also be used with engines not equipped with aftertreatment systems using 2000-ppm
(or less) sulfur fuel without affecting the oil change interval.
• Cat DEO-ULS is developed and tested to provide superior protection and life for Cat
engines.
• Better Detergents – Protect against piston and ring groove deposits.
• Advanced Additive Package - Improves protection of the engine and the Diesel Particulate
Filter (DPF).
• Enhanced Dispersants - Provide better soot-related viscosity control, prevents viscosity
loss from shearing and reduce oil consumption.
• Improved Protection from Thermal and Oxidative Breakdown - Withstands higher sump
temperatures while offering low-temperature pumpability.
SAE Viscosity Grade SAE 15W-40 SAE 10W-30
API Service Classification - Diesel CK-4, CI-4 PLUS/CI-4, CH-4
API Service Classification - Gasoline SM/SL
Volvo Performance Level VDS-4/VDS-3 VDS-4/VDS-3
ACEA Performance Level E9/E7 E9/E7
Cummins Performance Level CES 20081
Mack Performance Level EO-o Premium Plus
DDC Performance Level Powerguard 93K218
Mercedes Benz Performance Level MB 228.31
Flash Point, °C (ASTM D92) 236 230
Pour Point, °C (ASTM D97) -30 -27
Viscosity cSt @ 40°C (ASTM D445) 114 79
Viscosity cSt @ 100°C (ASTM D445) 15.0 11.9
Viscosity Index (ASTM D2270) 137 145
Sulfated Ash, % wt. (ASTM D874) 0.98 0.97 (ASTM D4739)
TBN (ASTM D2896) 10.4 10.4
Phosporous, %wt. (ASTM D4951) 0.100 0.100
Sulfur, % wt. (ASTM D2622) 0.3 0.3
Gravity @16°C API (ASTM D287) 30.2
Gravity @16°C Specific 0.876
10 The values shown are typical values and should be used as quality control parameters to either accept or reject product. Specifications
are subject to change without notice.
247
Cat DEO-ULS (Cont'd.)
English Volume (gal) Metric Volume (L) Part Number
Cat DEO-ULS 15W-40
1 — 291-3866
2.5 — 462-7705
5 — 291-3868
55 — 291-3869
Bulk — 300-7013
— 4 378-6535
— 5 368-4791
— 20 300-7915
— 208 301-2233
— 1000 381-7214
— Bulk 349-2581
Cat DEO-ULS 10W-30
1 — 317-3081
2.5 — 462-7704
5 — 317-3083
55 — 317-3084
Bulk — 319-2260
— 1 341-0729
— 4 378-8296
— 5 368-4792
— 20 308-1476
— 208 317-3085
— 1000 444-3549
— Bulk 346-0465
248
Cat SAEO
Recommended Use
• Cat Special Application Engine oil is the only oil approved by Caterpillar for use in
the 3116 and 3126 Marine Diesel Engine with mechanical unit injection and a
closed crankcase ventilation system. This system circulates blowby gases from
the engine crankcase to the turbocharger inlet. These blowby gases can form
harmful deposits in the turbocharger and the aftercooler. Cat Special Application
Engine Oil is designed to reduce or eliminate the formation of these harmful de-
posits.(11)
• Stops the buildup of deposits in the turbocharger compressor and the aftercooler
that can reduce power and cause an increase in smoke.
• Maintains stable oil consumption within the specified oil change interval and
from one interval to the next.
• Stabilizes functional chemistry throughout each service interval.
• Stops the buildup of deposits on pistons and rings that can increase oil
consumption.
• Helps to eliminate the formation of deposits on pistons that are abrasive enough
to polish the hone pattern from the surface of the lines.
• Prevents the clumping of soot particles that can cause an abnormal increase in
viscosity, piston deposits, or sludge.
SAE Viscosity Grade SAE 30 SAE 40
Manufacturer Cat 1K Cat 1K
Flash Point, °C (ASTM D92) 228 239
Pour Point, °C (ASTM D97) -30 -18
Viscosity cSt @100°C (ASTM D445) 10.7 13.9 (min)
Sulfated ASh, % wt. (ASTM D874) 0.9 0.9
TBN (ASTM D2896) 6.5 6.5
Zinc, % wt. (ASTM D1549) 0.103 max 0.112 max
Phosporous, % wt. (ASTM D1091) 0.102 max 0.102 max
SAE 30
1 — 170-5262 SAE 40
5 — 198-7368 1 — 170-5261
Bulk — 161-5824 5 — 198-7369
11 Cat SAEO should not be used in 3406, 3126, C-10, C-12, or 3116 low emission on-highway truck engines. Use Cat DEO multi-grade oils.
249
Oils - Natural Gas Engine Oil
Cat NGEO™
Recommend Use
• Designed for engines using gaseous fuels.
• Compatible with exhaust catalyst applications that require a low-phosphorus oil.
• Provides optimum engine and oil life with low-sulfur gaseous fuels that contain
less than 0.43 mg hydrogen sulfide per mega Joule (0.35 mg hydrogen sulfide per
BTU).
• Cat NGEO is formulated from select base stocks blended with special additives
to provide an economical engine oil for natural gas applications. Cat NGEO is de-
veloped, tested and approved by Caterpillar to meet the same high standards as
all Genuine Cat Parts.
• High-Endurance Lubrication - Performs throughout the long oil change intervals
common for gaseous fuel engines.
• Reduced Piston and Cylinder Wear - Anti-oxidation and anti-nitration properties
prevent carbon deposit buildup to minimize scuffing, scoring and wear.
• Increased Valve Life - Protects against damage to guide faces and seals.
• Corrosion Protection - Neutralizes acids to prevent rust and copper corrosion.
• High-Temperature Performance - Provides excellent thermal stability and resists
foaming and sludge formation.
SAE Viscosity Grade SAE 40
Gravity, API 27.5
Flash Point, °C (ASTM D92) 265
Pour Point, °C (ASTM D97) -12 max
Viscosity cSt @ 40°C (ASTM D445) 130
Viscocity cSt @100°C (ASTM D455) 13.5
TBN, mg KoH/g (ASTM D2896) 6.2
Phosphorus, % wt. (Spectro or AA) 0.030
Calcium, % wt. (Spectro or AA) 0.125
SAE 40 SAE 40
— 19 121-0327 — 208 105-3336
— 200 197-6911 — 1000 159-8156
— 205 9X-8527
1 The values shown are typical values and should not be used as quality control parameters to either accept or reject products. Specifi-
cations are subject to change without notice.
250
Cat NGEO EL250
Applications
• For natural gas engines and other engines requiring low ash oil.
Features
• Increased detergent concentration and acid neutralizing capability to assure less lacquer and deposits on pistons
and valves.
• Control of sludge formulation.
• Outstanding resistance to oil nitration and oxidation.
Benefits
• Improves ring and liner service life.
• Increased soot-handling capability.
• Protection against valve guide face and seat damage, piston scuffing, scoring and piston/cylinder wear, foam and
corrosion damage, and piston carbon deposits.
Typical Characteristics
SAE Visc Grade SAE 40
Gravity, API 27.5
Pour Point, °C (ASTM D97) -12 min
Viscosity @ 40°C, cSt (AST D445) 130
Viscosity @ 100°C, cSt (ASTM D445) 13.5
Sulfated Ash, %wt (ASTM D874) 0.57
TBN, mg KOh/g (ASTM D2896) 6.5
Phosphorous, %wt (Spectro or AA) 0.030
Calcium, %wt (Spectro or AA) 0.14

SAE 40
— 20 216-9221
— 208 216-9224
— Bulk 7X-2426
251
Cat NGEO EL350™
Recommended Use
• Provides superior lubrication in high-horsepower gaseous-fueled engines.
• Compatible with exhaust catalyst applications that require a low-phosphorus oil.
• Compatible with “learn burn” engines requiring low-ash oil.
• Provides optimum engine and oil life with low-sulfur gaseous fuels that contain
less than 0.43 mg hydrogen per mega Joule (0.35 mg hydrogen sulfide per BTU).
• May be used in engines that use high-sulfur gas or bio-gas, provided that shorts
drain intervals are employed.

• Cat NGEO EL350 is developed, tested, and approved by Caterpillar to meet the same high standards as all genuine
Cat parts.
• Factory-Fill - Used as standard factory-fill for Cat natural gas engines.
• Reduced Piston and Cylinder Wear - Anti-oxidation and anti-nitration properties prevent deposit buildup to mini-
mize scuffing, scoring and wear.
• Increased Spark Plug and Valve Life - Excellent detergent and dispersant additives protect against deposits and
damage.
• Corrosion Protection - Acid neutralizers protect parts from rust and copper corrosion.
• Extended Drain Intervals - Provide extended oil drain capabilities when used in conjunction with out S•O•S•SM
Services oil analysis program.
Gravity @ 16°C, API (ASTM D287) 29.3
Gravity @ 16°C Specific 0.882
Pour Point, °C (ASTM D97) -21
Viscosity Index (ASTM 2270) 97
TBN, mg KoH/g (ASTM D2696) 6.2
Phosphorus, % wt. (Spectro or AA) 0.03
Calcium, % wt. (Spectro or AA) 0.13
SAE40 SAE40
— 20 225-5084 — 1000 249-2309
— 205 269-1971 — Bulk 283-0781
— 208 225-5085
252
Cat NGEO Advanced 40
Cat NEGO Advanced 40 is an SAE 40 viscosity grade. The oil is designed to specifications that provide superior lubri-
cation performance in Cat natural gas engines. Cat NGEO Advanced 40 is formulated from select base stocks
blended with special additives to provide:
• Excellent oxidation stability and nitration control properties
• Good thermal stability for high temperatures deposit control
• Reduced carbon and sludge formation
Reduced Piston and Cylinder Liner Wear
• High temperatures deposit control properties prevent deposit buildup on pistons and piston rings to minimize
scuffing, scoring, and wear.
Increased Spark Plug and Valve Life
• Excellent detergent and dispersant additives protect against deposits and damage.
Corrosion Protection
• Acid neutralizers protect parts from rust and copper corrosion.
NGEO Advanced 40 provides optimum engine and oil life with low-sulfer gaseous fuels that contain less than 0.43 mg
hydrogen per mega joule (0.35 mg hydrogen sulfide oer BTU) NGEO Advanced 40 may be used in engines that use
high-sulfur gas, provided that shorter drain intervals are employed.
Viscosity Grade SAE 40
Flash Point, °C, ASATM D92 252
Pour Point, °C ASTM D97 -30
Viscosity cSt, D445
40°C 115
100°C 12.7
Viscosity Index, ASTM D2270 103
Sulfated Ash. wt %, ASTM D874 0.5
Total Base Number, mg KOH/G, ASTM D2896 6
Phosphorous, wt %, spectro 0.03
Calcium, wt % spectro 0.15
Cat NGEO Advanced 40 Cat NGEO Advanced 40
5 — 381-2364 — 208 331-7031
55 — 381-2365 — 1000 381-2367
— 20 331-7030 — Bulk 331-7032
253
NGEO Ultra 40
Recommended Uses
• Compatible with exhaust catalyst applications that require low-phosphorous oil
• Compatible with “lean burn” engines requiring low-ash oil
• May be used in engines that use high-sulfer gas, provided that shorter drain intervals are employed
SAE Viscosity Grade 40
Flash Point °C (ASTM D92) 220 min
Pour Point °C (ASTM D97) -21
Viscosity
cST @ 40°C (ASTM D445) 125
cST @ 100°C (ASTM D445) 13.0
Viscosity Index (ASTM D2270) 95 min.
TBN, mg KOH/g (ASTM D2896) 6.0
Sulfated Ash, % wt (ASTM D874) 0.54
Phosphorous, % wt (Spectro or AA) 0.030
Calcium, % wt (Spectro or AA) 0.130

Cat NGEO Ultra 40
5 20 331-7382
55 208 331-7383
— Bulk 331-7384
254
Oils - Hydraulic Oil
Cat Bio HYDO™ Advanced
High Performing, Environmentally Friendly
Cat Bio HYDO Advanced is an environmentally friendly hydraulic fluid that has the drain interval of premium mineral-
based oil. Developed for use in any environment, Cat BIO HYDO Advanced provides superior performance across a
wide temperature range and many applications, including: Construction, Forestry, Dredging, Ports, and Tunnel
Boring.
Benefits:
Environmentally Friendly
• Non-toxic formula
• Readily biodegradable
• EU Flower eco-label certified
Extended Drain Intervals
• Excellent oxidation stability
• Comparable to premium mineral-based hydraulic oils
Exceptional System Protection
• Superior wear protection
• Corrosion resistance
• Fast air release
Features:
• Long Life - Cat Bio HYDO Advanced out performs the previously recommended Cat Bio HYDO and competitive
brands. In fact, Cat Bio HYDRO Advanced performance is comparable to premium mineral-based hydraulic oils.
Like Cat HYDRO Advanced, Cat Bio HYDO Advanced can be taken up to 6,000 hour drain interval with Cat S•O•SSM
Fluid Analysis.
• Biodegradable - readily biodegradable and non-toxic, so that it can be used in environmentally sensitive areas
without concern.
• Wide temperature Range Protection - maintains consistent wear protection throughout the entire temperature
range, - 22°F (-30°C)-113°F (45°C). From cold start through to operating temperature, Cat Bio HYDO Advanced gives
you best system protection.
• Improved Flow Through Filters - retains its ability to flow through filters even when water is present.
• Seal Compatibility - Cat Bio HYDO Advanced is highly compatible with the seals used in Cat Hydraulic systems.
This means fewer leaks and lower maintenance costs.
• Component Protection - specially developed additives form a perspective layer on wear surfaces, reducing wear
in hydraulic pumps and other components. Cat BIO HYDO Advanced provides excellent corrosion protection to
steel and bronze components, even at high temperatures.
255
Cat Bio HYDO™ Advanced (Cont'd.)
Cat Bio HYDO Advanced Typical Characteristics(1)
Cat Bio HYDO
Characteristics Advanced (HEES) Benefits of Cat io HYDO Advanced
Oxidation Stability Test, ASTM D493 (Longer is better) More than Long Drain interval Results in Reduced Owning &
3,000 hrs (Dry) Operating Cost
Long Drain Interval Capability Yes –
Suitable for use in Environmentally Sensitive Areas Yes Low Environmental Impact
Renewable Content, ASTM D6866 >80% –
Viscosity at 100°C, ASTM D445 9.0 cSt Excellent Wear Protection and wide Operating Temperature Range
Viscosity at 40°C ASTM D445 46.0 cSt Cat Bio HYDO Advanced is Recommended For Ambient Tempera-
tures from -30°C to 45°C
Viscosity Index, ASTM D2270 (Higher is Better)(2) 180 –
Viscosity at 100°C, ASTM D445 During Use After Shear(2) 9.0 cSt –
Pour Point, ASTM D 97 -48°C –
Brookfield Viscosity at -20°C ASTM D2983 1,380 cP –
FZG Gear Test DIN 51534, Fail Stage (Higher is better)(3) >12 Excellent Wear Protection and Wide Operating Temperature Range
4-Ball Wear Test, ASTM D4172 0.35 mm Cat Bio HYDO Advanced is Recommended for Ambient Tempera-
tures from -30°C to 45°C
35VQ25 Total Wear, mg (Lower is better) 25 mg –
Air Release at 50°C (ASTM D3427) (Lower is better) 1 minute Faster Air Release Reduces Cavitation Damage
Copper Strip Corrosion ASTM D130, 3 Hours (1A is better 1A at 150°C Best in Class Corrosion Protection
then 1B. 1A at 150°C is better than 1A at 100°C)
Corrosion Protection, ASTM D665B Pass –
Cat Bio HYDO Advanced Cat Bio HYDO Advanced
5 — 339-3249 — 20 341-3442
55 — 339-3250 — 208 341-2443
— 5 142-3218
Cat HYDO Advanced 10, 20, 30

6,000 Hour Extended Drain Intervals
Cat is introducing a new hydraulic oil to fluid product line, Cat HYDO Advanced 10. This new
oil is a combination of premium additives and specially selected and controlled higher qual-
ity base oils designed to provide extended drain intervals and extra protection to hydraulic
system components.
Cat HYDO Advanced 10 represents a significant performance breakthrough in hydraulic oil
technology. The oil has been developed with an optimized formulation that has been sub-
jected to severe qualification testing in the field and laboratory for thousands of hours. The
result is the best product available for Cat hydraulic systems.
1 The values shown here are typical values and should not be used as quality control parameters to either accept or reject product. Spec-
ifications are subject to change without notice.
2 High Viscosity Index oils containing viscosity modifier additives will become thinner during use, this will reduce the level of protection.
3 In addition to high FZG rating, the oil must demonstrate excellent protection to hydraulic pumps and motors, excellent corrosion protec-
tion and compatibility with metal and seals.
256
Cat HYDO Advanced 10, 20, 30 (Cont'd.)
Features & Benefits
• 6,000 hour extended drain intervals - up to the hours of Cat HYDO 10W when monitored with Cat S•O•S Services oil analysis
program-every 500 hours. Reduced owning and operating costs and increases uptime.
• Improved corrosion protection - protects metal surfaces from rust. Better corrosion protection than most oils in the Cat line-
up.
• Enhances long lasting anti-wear protection - specially developed additives form a protective layer on the wear surfaces, re-
ducing component wear in high-pressure piston, vane and gear hydraulic pumps.
• Holds water in dispersion-contains emulsifiers specially designed to dispense water. Cat does not recommend oils that “sepa-
rate,” “shed,” or “release” water. Separated water drawn through the hydraulic system can damage pumps and other com-
ponents. If this water freezes, it can cause serious damage.
• Backward compatibility - the only hydraulic oil you need to stock for your maintenance operations. Preferred fill for Cat
equipment.
• Improved filtration properties - special detergent dispersants keep components clean and improve transport of contaminants
through the filters. Compatible with Cat Ultra High Efficiency filters.
• Faster air release –rapid air separation reduces air release time, preventing cavitation, Cat HYDO Advanced 10 air release of
less than 4 minutes is far superior compared to Cat HYDO 10W at 7-10 minutes air release time (per ASTM D3427 testing).
• Wide temperature range protection - maintains consistent wear protection at both cold and hot temperatures. Designed to
flow readily at cold temperature start up, and maintains excellent wear protection at operating temperatures.
• Improved oil stability - 250% increase in oxidation stability per ASTM D943. Improved oil stability and wear protection make
Cat HYDO Advanced 10 last longer.
Cat HYDO Advanced 10 Typical Characteristics(4)

Characteristics HYDO Advanced 10 HYDO Advanced 20 HYDO Advanced 30
SAE Viscoscity 10W 20 30
cST @ 40°C (ASTM D445) 42 68 90
cSt @ 100°C (ASTM D445) 6.7 9.0 10.6
Viscosity Index (ASTM d2270) 114 110 100
Viscosity after Shear (cSt, during use)(5) 6.7 9.0 10.6
FZG Gear Test DIN 51534, Fail Stage(6) 12 12 12
35VQ25 Vickers Total Wear Test 33 mg 33 33 mg
4 Ball 0.37 mm 0.30 mm
Pour Point, °C (ASTM D97) -24 -33 -24
Pumping @ -30°C mPaS (ASTM D4684) 55,400
Brookefeld Viscosity @ -20°C (ASTM D2983) 7,438 13,600
mPaS
Zinc, % wt. (ASTM D4951) typical 0.090 0.094 0.090
Copper Strip Corrosion (3 hr, ASTM D130)(7) 1A @150°C 1A @150°C 1A @ 150°C
Rust Protection (ASTM D665B)(8) Pass Pass Pass
Oxidation stability, hours (ASTM D943) > 5,000 > 5,000 > 5,000
Long Drain Interval, confirmed by field testing Yes Yes Yes
Filterability, Wet, E DIN ISO 13357-1 Pass Pass Pass
Air Release @ 50°C (ASTM D3427) 4 minutes 7 minutes
5 Oils that contain viscosity modifier additives will become thinner during use in this machine. This will reduce protection level.
6 Higher is typically better, but too much active antiwear additives may lead to reduced component life.
7 1A is better than 1B, 1A at 150°C is better than 1A at 100° C.5
8 May be difficult to pass with 10W engine oils.
257
Cat HYDO Advanced 10, 20, 30 (Cont'd.)
Cat HYDO Advanced 10 Typical Characteristics(9)
Characteristics HYDO Advanced 10 HYDO Advanced 20 HYDO Advanced 30
Foam Test(10)
Seq.1 ml. (ASTM D892) 0/0 0/0 0/0
Seq.2 ml. (ASTM D892) 5/0 0/0 0/0
Seq.3 ml. (ASTM D892) 0/0 0/0 0/0
Cleanliness No interference with optical No interference with optical par- No interference with optical par-
particle counters ticle counters ticle counters
Ability to keep water in emulsion Yes Yes Yes
Cat HYDO Advanced 10 — 15,000 309-6934
1 — 309-6932 Cat HYDO Advanced 20
2.5 — 462-7710 1 — 422-6704
5 — 309-6931 5 — 422-6705
55 — 309-6930 55 — 422-6706
Bulk — 314-5168 Bulk — 422-6703
Bulk Rail — 309-6929 — 4 422-6709
— 5 309-6945 — 5 422-6711
— 18 309-6944 — 20 422-6712
— 19 309-6943 — 208 422-6714
— 20 309-6942 — 1000 422-6715
— 60 309-6941 — Bulk 422-6708
— 200 309-6940 Cat HYDO Advanced 30
— 205 309-6939 — 18 319-5920
— 208 309-6938 — 20 319-5921
— 1,000 309-6937 — 200 319-5922
— 2,000 309-6936 — 208 319-5923
— 10,000 309-6935 — Bulk 319-5919
10 New oil, as received, with 0.1% water by volume added.
258
Oils - Transmission and Drive Train Oil
Cat TDTO™
Recommended Use
• Preferred lubricant for Cat power shift transmissions, most final drives and wet
brake compartments.
• Cat machine compartments where TO-4 and TO-4M specification oils are
recommended.
• Other manufacturers’ machines that recommend TO-4 ot TO-4M or specifications
oils for their transmissions, final drives and wet brake compartments.
• Cat TDTO is developed, tested and approved by Caterpillar to meet the same high
• Factory-Fill - Used as standard factory-fill for Cat machine compartments where
TO-4 oils are specified.
• Longer Clutch Life - Prolongs clutch disc life up to 45%.
• Optimum Wear Life – Ensures long life and excellent performance for gears,
bearings and friction disc material.
• System-Matched Formula - Engineered as an integral part of Cat power shift
transmissions, most wet brake compartments, and Hydrostatic Systems.
SAE Viscosity Grade SAE10W SAE 30 SAE 50
Caterpillar Test TO-4 TO-4 TO-4
Allison Test C-4 C-4 C-4
ISO Viscosity 42 100 220
Flash Point, °C (°F) (ASTM D92) 202 (395) 224 (435) 240 (464)
Pour Point, °C (°F) (ASTM D97) -33 (-27) -18 (0) -15 (5)
CCS Viscocity cP @ -25°C (ASTM D5293) 6840
Kinematic Viscosity cSt @ 40°C (ASTM D445) 42.0 100 195
Kinematic Viscosity cSt @ 100°C (ASTM D445) 6.3 11.2 18.0
Viscosity Index (ASTM D2270) 97 97 96
TBN (ASTM D2896) 7.9 7.9 7.9
Zinc, % wt. (ASTM D4951) 0.127 0.127 0.127
Gravity API (ASTM D287) 27.9 27.0 24.7
Phosphorus, % wt. (ASTM D4951) 0.110 0.110 0.110
SAE 10W — 205 7X-7851
5 — 8T-9568 — 208 103-2528
55 — 8T-9569 — 209 123-3104
Bulk — 155-6212 — 1000 166-0393
— 5 100-7019 — Bulk 3P-0659
— 19 145-0995 SAE 30
— 20 7X-7852 1 — 248-7521
— 25 9X-8525 2.5 — 452-7708
— 200 112-2866 5 — 8T-9572
1 The values shown are typical values and should not be used as a quality control parameters to either accept or reject product. Specifi-
259
Cat TDTO™ (Cont'd.)
55 — 8T-9573 5 — 8T-9576
Bulk — 155-6213 55 — 8T-9577
— 4 452-6113 Bulk — 155-6214
— 5 9X-6467 — 4 452-6114
— 18 9X-2010 — 5 9X-8443
— 20 7X-7855 — 18 9X-2012
— 200 7X-2888 — 20 7X-7858
— 205 7X-7854 — 200 9X-8520
— 208 9X-6466 — 205 7X-7857
— 1000 7X-7611 — 208 3E-9478
— Bulk 2P-9869 — 1000 7X-7612
SAE 50 — Bulk 5P-1228
2.5 — 462-7709
Cat TDTO-TMS™
Recommended Use
• Cat transmissions, wet brakes and hydraulic compartments that must operate in
wide temperature ranges.
• Cat machine compartments where TO-4 and TO-4M specification oils are
recommended.
• Other manufacturers machines that recommend TO-4 or TO-4M specification oils
for their transmissions, final drives and wet brake compartments.
• Cat TDTO-TMS is a proprietary formulation that was specifically developed,
tested and approved by Caterpillar to ensure peak performance in your transmis-
sion and to meet the same high standards as all genuine Cat parts.
• Longer Component Life-Reduces wear on transmission gears.
• Improved Cold-Weather Performance - Improves performance and efficiency of
transmissions in cold weather, especially for machines with electronic controls.
• Optimum Wear Life - Ensures long life and excellent performance for gears, bear-
ings and friction disc material.
• Fewer Oils, Fewer Changes -Can be used in multiple compartments with ex-
tended drain intervals over multiple seasons.
SAE viscosity Grade Multi Viscosity
Caterpillar Test TO-4M, TO-4
Allison Test C-4
Gravity , API (ASTM D287) 29.2
Flash Point, °C (°F) (ASTM D92) 222 (432)
260
Cat TDTO-TMS™ (Cont'd.)
Pour Point, °C (°F) (ASTM D97) -39 (-38)
Viscosity cSt @40°C (ASTM D445) 107
Viscosity cSt @100°C (ASTM D445) 14.2
TBN (ASTM D2896) 8.4
Zinc, % wt. (ASTM D4951) 0.127
KRL Shear Stability 10.0%
Multi-Viscosity Multi-Viscosity
2.5 — 469-0584 — 20 154-0196
5 — 154-0195 — 208 154-0197
55 — 154-0194 — 1000 444-3553
Bulk — 154-0192 — Bulk 154-0193
Cat TDTO Cold Weather

Best Performance and Protection for Cold Weather Applications
Cat TDTO Cold Weather is a synthetic blend lubricant that provides superior performance and
protection in transmissions, torque converters, final drives, hydraulics and/or wet brakes at
temperatures down to -40°F (-40°C). The special formulation creates optimal friction perform-
ance and controls transmission slippage while eliminating clutch glaxing. Cat TDTO Cold
Weather has excellent compatibility with all materials used in Cat machines, including friction
materials, seals and elastomers. The outstanding thermal stability and oxidation resistance
gives Cat TDTO Cold Weather long drain intervals.
Benefits:
Performance
• Easier Engine Starts
• Greater Machine Rim Pull and Breakout Force
• Long Drain Intervals
Protection
• Promotes Transmission Durability
• Increased Clutch, Gears and Bearing Life
• Optimal Cold Weather Friction Performance
Applications
Cat TDTO Cold Weather is the preferred transmission and drive train oil for low temperature
operation in certain applications and can be used in wet brakes and hydraulics. Refer to SE-
BU6250 for more information.
261
Cat TDTO Cold Weather (Cont'd.)
Long Drain Intervals
Cat TDTO Cold Weather is also recommended for applications with the following original
equipment manufacturer requirements:
• Cat TO-4
• Allison C-4
• Komatsu Micro-Clutch
• Vickers 35VQ25
With the use of Cat S•O•SSMOil Analysis and Cat Filters, Cat TDTO Cold Weather is capable of
long change intervals.
SAE Viscosity 0W-20
Gravity @ 16°C (60°F)
Gravity @ API (ASTM D287) 30.8
Specific Gravity .872
Flash Point @ °C (ASTM D92) 190
Pour Point @ °C (ASTM D97) -48
Kinematic Viscocity (ASTM D445)
CSt @ 40°C 30.7
cSt @100°C 7.4
Brookfield Viscosity (ASTM D2983)
cP @ -40°C 8000 max
Phosphorus, ppm 1040
Zinc, % wt 0.129
Calcium, % wt 0.310
1 — 341-1949 — 20 228-6069
5 — 228-6069 — 205 228-6070
55 — 228-6070 — 208 466-5027
Bulk — 301-4523 — 1000 444-3552
— 4 332-8851 — Bulk 343-7108
262
SATO
SATO will be the primary factory fill oil for the machine models listed previously. Top-off with other products from the
CAT TDTO family should be limited to less than 10% maximum of sump capacity, and the use of higher viscosity fluids
for top-off can adversely impact cold start performance
At the time of an oil change switching from CAT SATO to Cat TDTO or from Cat TDTO to Cat SATO, no special com-
partment flushing or alternative procedures are required. Follow Standard oil change procedures for the machine.
Pour Point, °C (ASTM D97) -42
Viscosity cP @ -30°C (ASTM D5293 13,500
Viscosity @ 40°C, cSt (ASTM D445) 73
Viscosity @ 100°C, cSt (ASTM D445) 11.4
Viscosity Index (ASTMD2270) 149
Zinc, % wt (ASTM D4951) 0.138
Phosphorous, % wt ASTM D4951() 0.110
Calcium, % wt (ASTM D4951) 0.312
Temperature Range (ambient) -30 to 50°C / -22 to 50°F
5 – 427-0401 – 208 427-0388
55 – 427-0443 – Bulk 427-0372
– 20 427-0375
Contact Information:
Global Dealer Solutions Network
Parts Technical Support Team
Tool Free - North America: 1-877-228-2420
International: +1-309-266-4421
Electronic Requests:
Send via Microsoft Customer Relationship Management (MSCRM)
263
Oils - Final Drive and Axle Oil
Cat FDAO™
Recommended Use
• Preferred lubricant for Cat Off-Highway Truck front wheels, differentials and final
drives.
• Preferred lubricant for Cat Large Track-Type Tractor, Pipelayer, and Track Skidder
final drives (steel-tracked machines with elevated final drives except the D5M,
D6M, and 561M).
• Compatible with Cat final drives and axles that previously specified TO-4 lubri-
cants and do not contain friction material.
• Cat FDAO is developed, tested and approved by Caterpillar to meet the same high
• Factory-Fill - Used as standard factory-fill Cat Off-Highway Trucks and Large
Track-Type Tractors.
• Extended Drain intervals - Allows for double-length drain intervals in off-highway
truck final drives, as compared to TO-4 commercial oils.
• Minimal Foaming - Formulated to protect against the damaging effects of air.
ISO Viscosity Grade 320
Gravity, 16°C API (ASTM D287) 25.9
Gravity, 16°C Specific .899
Pour Point, °C (°F) (ASTM D97) -15 (5)
Viscosity cSt @ 100°C (ASTM D445) 25.2
Viscosity cSt @ -10°C (ASTM D2983) 75,000
Copper Strip (ASTM D130, 2 hrs @100°C) 1A
SAE 60 SAE 60
5 — 184-6022 — 205 201-9855
55 — 184-6021 — 208 184-8056
Bulk — 184-6020 — 1000 221-3445
— 18 206-5210 — 1200 202-9753
— 20 184-8055 — Bulk 184-8054
— 200 198-7672
264
Oils - Final Drive and Axle Oil
Cat FDAO SYN™
Recommended Use
• Preferred lubricant for Cat Off-Highway truck and D11R carrydozer front wheels,
differentials and final drives operating under high load factors.
• Compatible with Cat final drives and axles that previously specified Cat FDAO or
TO-4 lubricants and do not contain friction material.
• Cat FDAO SYN is developed, tested and approved by Caterpillar to meet the same
high standards as all genuine Cat parts.
• Extended Drain Intervals - Extend drain intervals up to a factor of three in off-
highway truck final drives, as compared to Cat TDTO and TO-4 oils.
• Mining Foaming - Formulated to protect against the damaging effects of the air.
• Longer Bearing and Gear Life – Has demonstrated the capability to double bear-
ing life and quadruple gear life when compared to TDTO and TO-4 oils used off-
highway truck final drives.
SAE Viscosity Grade Multigrade
ISO Viscosity Grade 320
Caterpillar Test FD-1
Gravity, 16°C API (ASTM D287) 33.4
Flash Point, °C (°F) (ASTM D92) 246 (474) min.
Kinematic Viscosity cSt @ 40°C (ASTM D445) 320
Kinematic Viscosity cSt @ 100°C (ASTM D445) 31.6
Brookfield Viscosity cP @ -20°C (ASTM D2983) 34,000
Brookfield Viscosity cP @ -30°C (ASTM D2983) 131,200
Copper Strip (ASTM D130, 2 hrs @100°C) 1A
Multi-Viscosity Multi-Viscosity
5 — 208-2390 — 208 206-5212
55 — 198-7450 — 1000 454-9064
— 18 206-5211
265
Oils - Gear Oil
Cat GO
Recommended Use
• Cat GO does not meet Cat TO-4 specifications and should not be used when TO-4
is recommend
• Cat GO is a multi-viscosity API GL-5 classification gear oil intended for extreme-
pressure applications, such as the following:
• Differentials and final drives on Cat Wheel Tractor-Scrapers, specific Articulated
Trucks, Wheel Excavators, and Backhoe Loaders.
• Cold Planer direct drive transmissions, differentials and final drives.
• Drum bearings on Vibratory Soil Compactors
• Cat GO is tested and approved by Caterpillar to meet the same high standards as
all genuine Cat parts.
• Longer Gear and Bearing Life - Superior thermal stability and oxidation resist-
ance reduce deposits and wear.
• Extreme-Pressure Performance - Provides extra protection for improved per-
formance and life in extreme-load conditions.
• Simplified Maintenance - Multi-purpose capability reduces number of gears lu-
bricants needed for maintenance.
• Wide Temperature Range - Provides excellent stability at high temperatures and
superior performance at low temperatures for easier start-ups.
SAE Viscosity Grade SAE 80W-90 SAE 85W-140
Gravity @ 16°C API (ASTM D287) 26.6 25.1
Flash Point, °C (°F) (ASTM D92) 174°C 226°C
Pour Point, °C (°F) (ASTM D97) -27 (-17) -24°C
Viscosity cSt @ 40°C (ASTM D445) 130 377
Viscosity cSt @100°C (ASTM D445) 14.5 27.4
Viscosity cP @ -26°C (ASTM D2983) 107,000 75,200
Viscosity Index (ASTM D2270) 110 98
Phosporous, % wt. (ASTM D1091) 0.088 0.088
Density @ 160°C 0.897 0.910
266
Oils - Gear Oil
Cat GO (Cont'd.)
SAE 80W-90 — Bulk 2P-9863
2.5 — 462-7781 SAE 85W-140
5 — 8T-9582 2.5 — 462-7784
30 — 8T-9583 5 — 9X-6185
55 — 8T-9584 — 4 7X-7618
Bulk — 155-6220 — 18 133-9643
— 5 9X-6470 — 20 7X-7617
— 20 7X-7867 — 200 205-4312
— 60 7X-7887 — 205 7X-7616
— 200 424-2169 — 208 161-1246
— 208 9X-6469 — 1000 7X-7615
— 1000 119-5129 — Bulk 7X-7614
— 1200 8C-9927
Cat Synthetic GO
Recommended Use
• Cat GO does not meet Cat TO-4 specifications and should not be used when TO-4 is
recommended.
• Cat Synthetic GO is a full synthetic multi-viscosity API GL-5 classification multi-purpose gear
oil for the following applications:
• Sealed-and-lubricated track pins on Cat Track-Type Tractors and Track-Type Loaders.
• Track Type Tractor equalizer bar ends.
• Differentials and final drives on Cat Wheel Tractor-Scrapers, specific Articulated trucks,
Wheel and Mini Excavators, and Backhoe Loaders.
• Specific Articulated Trucks as recommended in your Operation and Maintenance Manual.
• Motor Grader circle drives.
• Cold Planer direct drive transmissions, differentials and final drives.
• Drum bearings on Vibratory Soil Compactors.
• Speed reducers on augers and elevators.
• Cat Synthetic GO is tested and approved by Caterpillar to meet the same high standards as
all genuine Cat parts.
• Maximum Gear and Bearing Life – Provides ultimate protection against scoring of gear
teeth, as well as pitting in gear teeth and rolling-element bearings.
• Extended Track Life - Improves galling resistance, reduces seal wear and minimizes bushing
end grooving in sealed-and-lubricated track joints.
• Wide Temperature Range - Offers superior stability at high temperatures and superior per-
formance at low, even arctic temperatures.
• Reduced Wear - Provides excellent oxidation resistance which reduces buildup of harmful
deposits.
• Extreme-Pressure Performance - Offers powerful protection under extreme duty conditions.
• Factory-Fill - Used as standard factory-fill for Cat machines.
267
Oils - Gear Oil
Cat Synthetic GO (Cont'd.)
SAE Viscosity Grade SAE 75W-140
API Service Classification GL-5, MT-1
Gravity API (ASTM D287) 31.7
Gravity Specific 867
Channel Point, °C (°F, max (FMTS 791A-3456) -45 (-49)
SAE 75W-140 SAE 75W-140
1 qt — 350-9510 — 4 350-9509
1 — 350-9509 — 19 242-3466
5 — 242-3466 — 208 242-3467
55 — 242-3467 — Bulk 8C-3400
268
Oils - Special Application Oils
Compactor Oil
• Special synthetic oil used in vibrator drum of Compactors

• Packaged in 20 L (5 gal) pails
• Large machines take 20 L (5 gal) per drum
• Small machines take 10 L (2 1/2 gal) per drum
Part Number Size

558-0201 1 gal
4C-6767 5 gal
417-9262 55 gal
456-5476 20 L
456-5477 208 L
507-0649 900 L
Cat Gear Oil 220

• High quality mineral gear oil used for industrial gear boxes
Part Number Size

546-0276 20 L
546-0275 200 L
546-0274 5 gal
546-0273 55 gal
269
Cat MTO
Recommended Use
• Recommended for older Car Backhoe Loader rear axles and Cat Challenger
Tractors.
• Cat Components and systems recommending multipurpose tractor fluid that meet
Ford/New Holland M2C134D specification.
• Most Cat Hydraulic Systems
• Cat MTO is developed, tested and approved by Caterpillar to meet the same high
• Improved Braking and Clutching – Where approved for use, enhances control
and extends life in clutches and wet brakes.
• Lower Maintenance Costs - Exceptional anti-wear properties extend equipment
and component lives.
• Cold-Weather Operation - Can be used in temperatures as low as -13°F (-25°C).
• Simplified Maintenance - Can be used in multiple compartments, reducing inven-
tory and the chance of using the wrong oil.
• Long-Lasting Performance - Offers high thermal stability and oxidation resistance
for long service life in severe applications.
OEM Compatibility
Cat MTO meets the following OEM specifications(1)
API GL-4
CNH MAT3525
For New Holland FNHA-2-C-201
Kubota UDT
Volvo WB 101/BM
Cat MTO can be substituted in applications that require the following:
AGCO Powerfluid 821 XL
Allison C4 (Agriculture Applications Only)
Denison HF-0/HF-1/HF-2 (T5D & P46)
Ford ESN-M2C 134D
JI Case MS 1204-07/09
John Deere JMD J20C
Massey Ferguson MF 1135/1141
Vickers 35VQ25
Gravity API (ASTM D287) 28.6
Viscosity Brookfield, cP at -20°C 4300
1 Cat MTO does not meet Cat TO-4 or FD-1 and should not be used in compartments that specify TO-4 or FD-1 oil.
270
Cat MTO (Cont'd.)
OEM Compatibility
Viscosity cSt @ 100°C (ASTM D445) 9.3
Zinc, % wt. 0.15 min.
SAE 10W-30 SAE 10W-30
2.5 — 462-7711 — 20 109-4395
5 — 105-3335 — 200 126-2700
55 — 105-3334 — 205 138-4271
Bulk — 155-6218 — 208 120-5286
— 5 172-6894 — Bulk 105-3333
— 18 135-3189
Brake Fluid
• Makes DOT and SAE requirements
DOT 3
• Use where DOT 3 brake fluid is specified by service manual or operators guide
• Loaders, lift trucks, and service trucks
DOT5
• DOT 5 is for extreme service conditions where higher than normal temperatures
will be encountered or where moisture absorption is a problem.
• High performance cars and off-road vehicles
Part Number Qty. Size

DOT 3
4C-5585 12 0.94 L (1 qt)
4C-5586 4 3.78 L (1 gal)
DOT 5
4C-5588 12 0.94 L (1 qt)
Governor Oil
• For 3600 Engine Woodward Governor
Part Number Qty. Size

136-9642 1 0.95 L
271
Oils - Additives
Cat Axle and Brake Oil Additive
English Volume (qt) Metric Volume (L) Part Number
1 qt — 197-0017
Oil Stabilizer
• Reduces oil consumption
• Reduces engine wear
• Helps keep vital engine parts clean
• Reduces thermal oil and viscosity breakdown
Part Number Qty Size

143-3655 12 0.94 L
This product should only be used as needed in the following engines:

Engine Model Engine Serial No.
3406E 5EK1-Up, 5DS1-Up, 6TS1-Up,1LW1-Up, 2WS1-Up, 1MM1-Up, 4AS1-Up
C-15 6NZ1-82494
C-16 7CZ1-Up
Hydraulic Oil Additive
• Low friction additive for some hydraulic systems

• Relieves “stick-slip” on noisy hydraulic cylinders
• Not for use on machines which have a common sump for hydraulics, brake, and
transmissions
Part Number Size Qty.

1U-9891 0.946 L (1 qt) bottle 12
272
Coolants
Health and Safety
Under normal conditions of intended use, these products do not pose a risk to health. Excessive exposure may result in eye, skin
or respiratory irritation. Always observe good hygiene measures. Read and understand that Material Safety Data Sheet (MSDS)
before using this product. For a copy of the MSDS, visit us on the web at www.catmds.com.
Cat ELC™
Recommended Use
• Cat ELC meets or exceeds the requirements of the following
specifications and guidelines:
– Cat EC-1
– ASTM D-3306
– ASTM-6210
– TMC RP-329
– TMC RP-338
– SAE J1034

• Cat ELC is developed, tested and approved by Caterpillar to meet the same high standards as all genuine Cat
parts.
• Factory-Fill - Used as standard
• Lower Maintenance Costs-Reduces engine coolant. CAT ELC eliminates the need for supplemental coolant ad-
ditives, extends coolant change-out intervals and reduces disposal requirements.
• Advanced Metal Protection - Incorporates an advanced formula technology with organic acid additive corro-
sion inhibitors, such as a combination of mono and dicaboxylates for maximum protection of copper, solder,
brass, steel, cast iron and aluminum.
Color Strawberry Red
Boiling protection with 15 psi (1 bar) radiator cap
50% Cat ELC/50% water 129°C (265°F)
60% Cat ELC/40% water (ELC concentrate added) 132°C (270°F)
Freezing protection
50% Cat ELC/50% water -37°C
60% Cat ELC/40% water (ELC concentrate added) -52°C (°62F)
Nitrite (50% solution) 500 ppm
Molybdate (50% solution) 530 ppm
273
Coolants
Cat ELC™ (Cont'd.)
English Metric Part
Volume (gal) Volume (L) Number Distribution Region
Cat ELC Concentrate (with embitterment)
— 4 365-8394 Asia Pacific
— 5 205-6615 Europe, Africa, Middle East
1 — 238-8647 North America and Latin America excluding Brazil
Cat ELC Premix 50/50 (with embitterment)
— 1000 365-8398 Asia Pacific
— 200 215-4242 Brazil
— 4 215-4245 Brazil
— 20 215-4246 Brazil
— 1000 205-6614 Europe. Africa, Middle East
Cat ELI
Recommended Use
• Inhibitor concentrate based on Cat
• For use in generator sets, industrial engines and marine engines that do not require freeze protection
• Corrosion protection, like Cat ELC, only without glycol
• Extended drain interval and little maintenance makes and excellent alternative to conventional supplement cool-
ant additives with water.
• Lower total owning and operating costs compared to water and SCA because of the extended drain interval and
limited maintenance of Cat ELC
English Metric Part

Cat ELI Concentrate
1 — 351-9431 Worldwide except Europe, Africa, Middle East
— 1000 366-2753 Latin America, Australia and North America
— 20 351-9432 Worldwide except Europe, Africa, Middle East
— 208 351-9433 Worldwide except Europe, Africa, Middle East
274
Coolants
Cat ELI (Cont'd.)
English Metric Part
Cat ELI Premix Brazil Only
52.8 200L 375-8009 Brazil
264.2 1000L 375-8010 Brazil
Cat DEAC™
Recommended Use
• Cat DEAC is approved for use in all Cat machines, commercial engine and truck
engine applications and most diesel, gas or natural gas engines made by other
manufacturers.
• Cat DEAC meets the following ASTM standards:
• ASTM D6210 (Heavy-duty antifreeze/coolants)
• ASTM D3306 (Automotive applications)
• ASTM D1384 (Glassware corrosion test)
• Cat DEAC is developed, tested and approved by Caterpillar to meet the same high
• Excellent Performance - Contains organic and inorganic corrosion inhibiting and
antifoam additives, and provides superior protection against pitting, corrosion
and freezing down to -37°C (-34°F)
• Convenience - Fully formulated, no pre-mixing with supplemental coolant additive
required at initial fill. Concentrate available in 1 gallon, 20 liter, and 55 gallon con-
tainers for top off.
Color Magenta
Boiling protection °C (°F) 15 psi pressure cap (ASTM D1177)
50% Car DEAC/50% water 129 (265)
60% Cat DEAC/40% water (maximum) 132 (270)
Freezing protection °C (°F)
50% Cat DEAC/50% water -37 (-34)
60% Cat DEAC/40% water (maximum) -52 (-62)
Silicon concentrate (in the form of Silicates) 240 ppm
Ethylene Glycol (% volume) 95.2% min.
275
Coolants
Cat DEAC™ (Cont'd.)
English Metric Part
Cat DEAC - Concentrate with Embitterment
1 3.79 339-3768 North America and Latin America
5 20 339-3770 North America and Latin America excluding Brazil
Cat NGEC™
Recommended Use
• Cat NGEC Premix 50/50 is a heavy-duty cooling system fluid especially designed
to provide superior protection against pitting, freezing, and corrosion in Cat natu-
ral gas engines or natural engines made by other manufacturers.
• Cat NGEC meets the following ASTM standards:
• ASTM D6210 (Heavy-duty antifreeze/coolants
• ASTM D3306 (Automotive applications)
• ASTM D1384 (Glassware corrosion test)
• Cat NGEC is developed, tested and approved by Caterpillar to meet the same
high standards as all genuine Cat parts.
• Fully Formulated - Does not require an initial supplemental cooling additive.
• Quick, easy servicing
• Superior Protection – Contains both organic and inorganic corrosion inhibitors
as well as antifoam additives. It provides superior protection against pitting, cor-
rosion and freezing down to -37°C (-34°F)
Color Purple
Boiling protection with 15 psi pressure cap °C (°F (ASTM D1177) °C (°F) ASTM D1177)
50% Cat NGE/50% water 265 (129)
60% Cat NGEC/40% water (concentrate added) 270 (132)
Freezing protection °C (°F)
50% Cat NGEC/50% water -34 (-37)
60% Cat NGEC/40% water (maximum) -62 (-52)
Ash content, % wt. (ASTM D1119) 0.60
3 The values shown are typical values and should not be used as a quality control parameters to either accept or reject product. Specifi-
276
Coolants
Cat NGEC™ (Cont'd.)
Silicon concentrate (in the form of Silicates) 120 ppm
Ethylene Glycol (% volume) 45.3
English Metric Part

Cat NGEC Premix 50/50 with Embitterment
— 1000 339-3766 Australia
277
Cooling System Cleaners
Cooling System Cleaner - Standard
Applications
• Cooling system cleaner, full effect after several weeks in the cooling system.
• Not for use in removing large amounts of oil from cooling systems.
Features
• Removes scale or lime deposits.
Benefits
• Cleans cooling system while the machine works.
English Metric Part

0.500 (2 qt.) 1.893 6V-4511 North America
Cooling System Cleaner - Quick Flush

Applications
• For use as preventative maintenance or as a short-time flush at the time of cool-
ant change.
• Not for use in removing large amounts of oil from cooling systems.
Features
• Removes lime deposits, scale and solder bloom.
Benefits
• Allows for one-step cleaning in just 90 minutes.

0.125 (1 pt) 0.473 4C-4609
0.250 (1 qt) 0.946 4C-4610
1 3.785 4C-4611
5 18.92 4C-4612
55 208.45 4C-4613
278
Cooling System Cleaners
Cooling Conditioner for Aluminum Components
• Passivates reactive aluminum components within the cooling system

• For use with Cat Extended Life Coolant (ELC) in applications with aluminum
radiators
• Inhibits the reaction that can cause depletion in nitrites in the Extended Life
Coolant
• 1-Time treatment, on-going use is not required

0.5 fl oz 15.0 ml 461-2417
1.5 fl oz 44.4 ml 369-0804
2.5 fl oz 73.9 ml 369-0805
279
Coolant Tools
275 Gallon Tote Ball Valve Dispensing Tool
To dispense coolant from 275-gallon totes, a new ball valve dispensing tool has been
added to the Cat product line-up. It was designed specifically to dispense coolant
from disposable totes.
The tote dispensing tool is easy to use, and instructions are included with each tool
group. Also included are toll-free 800 numbers to receive assistance from an experi-
enced professional on the ball valve tool, plus other accessories that may be useful
per your specific installation.
The valve group should last for several years, but the cutting tool may dull, necessi-
tating the replacement of the cutting tool only.
Part Number Description

232-4452 Ball Valve Group
Group Consists of:
232-4451 Ball Valve Assembly
232-4450 Cutting Tool
239-5289 Buttress Nipple
Cooling Conditioner Test Kit

Applications
• Simple dip test just minutes to perform. Measures coolant nitrite levels.
• Use on coolants containing nitrites (for measuring nitrite levels)
Features
• Does not require dilution, titration or drops to count.
Benefits
• Includes a color density change for people with color blindness.
Part Number Product

4C-9301 Coolant Conditioner Test Kit
(100 test strips, sample, bottle, pipette)
4C-9297 Refill test strips
280
Coolant Tools
Battery and Coolant Refractometer
• Used to measure freezing point of coolants plus battery charge condition.
• Refractometer uses a prism and lens with simple focus adjustment to provide.
• Easy to operate
• Automatic temperature compensation (ATC)
• Requires only 2 to 3 drops of solution.
• Carrying case and calibration screwdriver included.
• Reads degrees Centigrade and Fahrenheit.
Range Resolution
-60 to 32° propylene glycol freeze point 10°F
-50 to 0°C ethylene glycol freeze point 5°C
1.15 to 1.30 specific gravity of battery acid 0.01
Product Part Number

Battery and Coolant Refractometer 245-5829
Battery, Coolant and Diesel Exhaust Fluid Refractometer

• Digital refractometer is simple to use and to read
• Used for measuring concentration levels for multiple fluids including ethylene
glycol-based coolants such as Cat ELC ad Cat DEAC, propylene glycol-based
coolants, Cat ELI and battery charge condition.
• Tool operating manual provides conversion for concentration of coolant glycol
level to corresponding freeze protection level.
• Automatic temperature compensation
• Requires only a few drops of fluid
• Case and cleaning cloth included
Product Part Number

Test Kit, Brix Refractometer 360-0774
281
Additives
Cat® ELC Extender
Recommended Use
• Protects against cylinder liner/block pitting and cavitation erosion.
• Should be added to Cat ELC at 500,000 km (300,000 miles) for Cat powered on
highway trucks and 6,000 hours for commercial engines.
• Extender is typically necessary only once during the life of the coolant
• Ensures CAT ELC performance to 1,000,000 km (600,000 miles) or 12,000 hours
ELC Extender and Flush Intervals
Cat ELC Extender should be added after 6,000 hours or 300,000 miles (500,000 km) of
operation, and the system should be drained and flushed with clean water after
12,000 hours or 600,000 miles (1,000,000 km). No cleaning agents are needed.
English Metric Part

Cat ELC Extender
>0.250 (1 Qt.) .946 119-5152 —
1 3.79 210-0786 —
— 1 215-4241 Brazil
Cat® SCA
Application
• For regular maintenance use with Cat DEAC and other heavy duty diesel engine
coolants requiring maintenance with SCA.
• For use in water-based cooling systems, such as marine applications that do not
require glycol for antifreeze protection.
• Use for initial does in non-fully formulated (ASTM D4985) engine coolants
Features
• Helps stop rust and material deposits from forming in the cooling system.
Benefits
• Protects all metals.
• Protects against cylinder liner cavitation and corrosion.
• Will not affect gaskets or hoses.
Cat SCA Cat SCA
.063 (1/2 pint) — 6V-3542 55 — 5P-2907 (1)
.125 (1 pint) — 8T-1589 — 1 217-0616 (2)
.250 (1 qt) — 3P-2044 (1) — 20 217-0617 (2)
5 — 8C-3680 (1)
— 208 217-0618 (2)
1 North and South Americas only

2 EAME and APD only
282
Greases
Health and Safety
Cat Grease is developed, tested and approved by Caterpillar to meet the same high standards as all genuine Cat parts. Under normal condi-
tions of intended use, these products do not pose a risk to health. Excessive exposure may result in eye, skin or respiratory irritation. Always
observe good hygiene measures. Read and understand the Material Safety Data Sheet (MSDS) before using this product. For a copy of the
MSDS, visit us on the web at www.catmsds.com.
Cat Grease
Lithium Complex Thickener Calcium Sulfonate Thickener
Cat Utility grease Cat Extreme Application Grease 1
• NLGI 2 • NLGI 1
• General Purpose Product – where solid additives • Extreme Pressure - 5% Moly added for extreme
are not required impact and wear resistance
• Corrosion Protection – resists oxidation and pro- • Moisture Resistance – resists washout from fresh
tects metal against rust and salt water
• For low speed and low load applications where • Performs and protects where operating tempera-
operating temperatures are between (-20°C to tures are between -20°C to +140°C (-4°F to +284°F)
+140°C (-4°F to +284°F)
Cat Prime Application Grease Cat Extreme Application Grease 2

• NLGI 2 • NLGI 2
• Reduced Component Wear – resists softening and • Extreme Pressure – 5% Moly added for extreme
protects parts for optimal life impact and wear resistance
• Extreme Pressure – enhanced with 3% Moly for • Moisture Resistance – resists washout from fresh
moderate loads and salt water
• Long life – for applications where speed, loads • Performs and protects where operating tempera-
and temperature are moderate tures are between -15°C to +140°C (+5°F to +284°F)
• Performs and protects where operating tempera-
tures are between -20°C to +140°C (-4°F to +284°F)
Cat Extreme Application Grease – Arctic Cat Extreme Application Grease – Desert
• NLGI 0.5 • NLGI 2
• Extreme-Cold Operation – pumps and protects • Extreme-Heat Operation – performs and protects
where operating temperatures are between -50°C where operating temperatures are between -10°C
to +130° C (-58°F to +266°F) to +140°C (+14°F to +284°F)
• Extreme Pressure - 5% Moly for exceptional heavy • Extreme Pressure - 5% Moly for exceptional heavy
duty performance duty performance
• Semi-synthetic base oil • Mineral base oil
283
Greases
Specialty Greases
Cat Ball Bearing Grease
• Provides outstanding protection at high speeds and high temperatures associated with ball,
needle and sealed bearing applications
Cat Hammer Paste (1)
• Formulated for extreme temperatures and applications. Prevents seizing and signiἀcantly
slows wear in applications with repetitive impact and vibration
Cat High Vacuum Grease (1)
• Stiff silicone resists high temperatures while maintaining a seal under vacuum or pressure
Cat White Assembly Grease (1)
• Ideal for holding bearings, seals, gaskets and other parts during assembly
Cat Petro Gel Amber (1)
• Compound aiding in assembly of components
Reference Table
Lithium Complex Calcium Sulfonate Complex Polyurea
Cat Cat Advanced Cat Arctic Cat Ultra5 Cat Ultra5 Cat High Speed
Previous Cat Product Name Multipurpose Moly Platinum Moly #1 Moly #2 Cat Desert Gold Ball Bearing
Cat Prime Cat Extreme Cat Extreme Cat Extreme Cat Extreme
Package Cat Utility Application Application Application Application Application Cat Ball
Description(2) Size Grease Grease Grease - Arctic Grease 1 Grease 2 Grease - Desert Bearing Grease
Cartridge(3) 450 g, 15.9 oz.(3) 452-6015 452-6010 452-6000 452-6005 452-7458 454-0292
Cartridge 390 g, 14 oz. 452-6011 452-6006 508-2184 452-5996 452-6001 452-6016 454-0291
Plastic Pail 16 kg, 35 lb. 452-6014 452-6009 508-2187 452-5999 452-6004 452-6019
Keg 55 kg, 120 lb. 452-6013 452-6008 508-2186 452-5998 452-6003 452-6018
Drum 180 kg, 400 lb. 452-6012 452-6007 508-2185 452-5997 452-6002 452-6017
Specialty
Does Not Contain
Al Complex Silicone Lithium Complex a Thickener
Package Cat High Cat White
Description(2) Size Cat Hammer Paste Vacuum Grease Assembly Grease Petro Gel Amber
Cartridge 390 g, 14 oz. 130-6951 129-1966
Cartridge-AutoLube 390 g, 14 oz. 317-8491
12 pack of 317-8491 390 g, 14 oz. 317-8492
Tube 283 g, 10 oz. 266-9682 369-9451
Tube 150 g, 5.3 oz. 6V-2055
Plastic Pail 2.72 kg, 6 lb.
Plastic Pail 5 kg, 11 lb. 133-8807 369-9450
Plastic Pail 16 kg, 35 lb. 129-1969
1 Order through Antares

2 Not all products and package sizes will be available in your area.
3 Only available in Australia & New Zealand
284
Greases
White Assembly Grease
Applications
• For use in general assembly and other light-duty applications.
Features
• Added tackifiers, making it ideal for holding gears, bearings, gaskets and other parts during assembly.
• Contains no molybdenum disulfide.
Benefits
• Exceptional general purpose Lithium Complex grease.
NLGI #0
10 oz (tube) 254 g (tube) 266-9682
NLGI #2
14 oz (cartridge) 397 g (cartridge) 129-1966
35 (plastic pail) 16 (plastic pail) 129-1969
Cat Hammer Paste

Cat Hydraulic Hammer Paste (Grease) is formulated to lower friction and improve
tool and bushing life in the harsh environments encountered with hydraulic impact
hammer applications. These work tools generate high heat, severe shock, and
heavy friction loads, which can fuse parts together. Cat Hydraulic Hammer Paste is
made from copper and graphite to provide excellent wear protection even at tem-
peratures higher than 2,000°F (1,093°C).
Performance
• Formulated for extreme temperatures and applications
• Strong adhesion, even in the presence of water
Protection
• Significantly slows wear
• Prevents seizing
• Extremely stable and corrosion resistant
Color Copper
NLGI Class 2
Thicker Type Aluminum Complex
Base Oil Type Mineral
Operating Range -20 to 1,100°C (-4 to 2,012°F)
Worked Penetration (mm) 265-295
Viscosity @ 40°C, cSt 350
4 Ball E.P. Weld Point (kg) 400
Dropping Point 260°C (500°F)
4 The values shown are typical values and should not be used as quality control parameters
285
Greases
Cat Hammer Paste (Cont'd.)
NLGI #2
– 12 pack (auto lube cartridge) 317-8492
– 400 g (auto lube cartridge) 317-8491
11 lbs (tub) 5 kg (tub) 133-8807
High Vacuum Grease

• Applications where maintaining a seal under vacuum or pressure is required.
Petro Gel Amber

• Provides overall compatibility in most application utilizing retention compounds
• High quality, meeting customer needs
• For use in the following applications

– Engine Seals
– Transmission Seals
– Machine Seals English Volume Metric Part Number
– Hydraulic Cylinder Seals 6 lb 2.72 kg 369-9450
• Should not be used on gaskets or piston seals 10 oz 283 g 369-9451
Cat Open Gear Lubricant – High Viscosity/Semi-Synthetic Compound

• For use in Electric Rope Shovels and Draglines Open Gears
• Formulated for high load/low speed applications
• Available in both Cold Weather and Warm Weather formulations
Cat OGL - Cold Weather
English Volume Metric Part Number Distribution
120 lb 54 kg 557-5707 Worldwide except Brazil
120 lb 54 kg 557-5770 Brazil Only
400 lb 181.4 kg 511-4464 Worldwide except Brazil
400 lb 181.4 kg 511-4468 Brazil Only
2100 lb 952.5 kg 511-4469 Brazil Only
286
Greases
Cat Open Gear Lubricant – High Viscosity/Semi-Synthetic Compound (Cont'd.)
Cat OGL - Warm Weather
English Volume Metric Part Number Distribution
120 lb 54 kg 557-5706 Worldwide except Brazil
120 lb 54 kg 557-5769 Brazil Only
400 lb 181.4 kg 511-4466 Brazil Only
2100 lb 952.5 kg 511-4467 Brazil Only
287

OSS Equipment Fluids Section

Uploaded by

Copyright:

Available Formats

OSS Equipment Fluids Section

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

OSS Equipment Fluids Section

Uploaded by

Copyright:

Available Formats

EQUIPMENT FLUIDS

Oils - Diesel Engine Oil

Canada, Mexico and Canada, Mexico Egypt and Saudi

English Volume Metric English Volume Metric

English Volume (gal) Metric Volume (L) Part Number

Discover the Difference

English Volume (gal) Metric Volume (L) Part Number

Cat HYDO Advanced 10, 20, 30

Cat HYDO Advanced 10 Typical Characteristics(4)

Cat TDTO Cold Weather

• Special synthetic oil used in vibrator drum of Compactors

Part Number Size

Cat Gear Oil 220

Part Number Size

Part Number Qty. Size

Part Number Qty. Size

Part Number Qty Size

This product should only be used as needed in the following engines:

Hydraulic Oil Additive

• Low friction additive for some hydraulic systems

Part Number Size Qty.

Discover the Difference

English Metric Part

English Metric Part

English Metric Part

Cooling System Cleaner - Quick Flush

English Volume (gal) Metric Volume (L) Part Number

• Passivates reactive aluminum components within the cooling system

English Volume (gal) Metric Volume (L) Part Number

Part Number Description

Cooling Conditioner Test Kit

Part Number Product

Product Part Number

Battery, Coolant and Diesel Exhaust Fluid Refractometer

Product Part Number

English Metric Part

1 North and South Americas only

Cat Prime Application Grease Cat Extreme Application Grease 2

1 Order through Antares

Cat Hammer Paste

High Vacuum Grease

Petro Gel Amber

• For use in the following applications

Cat Open Gear Lubricant – High Viscosity/Semi-Synthetic Compound

You might also like