Scribd Logo
Upload

Welcome to Scribd!

  • 20 views

    2-Table of Contents

    Uploaded by

    Amy
    This inspection report summarizes an inspection of the jacket legs of the BEP-A offshore production platform located in the Betty field. UT thickness measurements were taken of the external surfaces of jacket legs A1, A2, B1, and B2 to determine remaining wall thickness. The inspection found reduced remaining thickness in some areas of the legs.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd

    2-Table of Contents

    Uploaded by

    Amy
    20 views4 pages
    This inspection report summarizes an inspection of the jacket legs of the BEP-A offshore production platform located in the Betty field. UT thickness measurements were taken of the external surfaces of jacket legs A1, A2, B1, and B2 to determine remaining wall thickness. The inspection found reduced remaining thickness in some areas of the legs.

    Original Title

    2-TABLE OF CONTENTS

    Copyright

    © © All Rights Reserved

    Available Formats

    DOC, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This inspection report summarizes an inspection of the jacket legs of the BEP-A offshore production platform located in the Betty field. UT thickness measurements were taken of the external surfaces of jacket legs A1, A2, B1, and B2 to determine remaining wall thickness. The inspection found reduced remaining thickness in some areas of the legs.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    20 views4 pages

    2-Table of Contents

    Uploaded by

    Amy
    This inspection report summarizes an inspection of the jacket legs of the BEP-A offshore production platform located in the Betty field. UT thickness measurements were taken of the external surfaces of jacket legs A1, A2, B1, and B2 to determine remaining wall thickness. The inspection found reduced remaining thickness in some areas of the legs.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    of 4

    CONTRACT NO : CHO/2012/SKO-BIE/1000

    PROVISION OF ICMS FOR PCSB

    INSPECTION REPORT REPORT NO. :


    PAGE NO. : 2
    REV NO : A

    TABLE OF CONTENTS

    1.0 INTRODUCTION 3
    2.0 INSPECTION SUMMARY 3
    2.1 Background 3
    2.2 Scope Details 3
    2.3 Restriction And Limitation 3
    2.4 Inspection Tools And Methods 4
    2.5 Outstanding Work 4
    2.6 Platform Overview 5
    2.7 Platform Data 5
    3.0 INSPECTION RESULTS 6 - 27
    3.1 Detailed Results 6 - 27
    1. Jacket Leg A1 7 - 11
    2. Jacket Leg A2 12 - 16
    3. Jacket Leg A1 17 - 21
    4. Jacket Leg B2 22 - 26
    3.2 Brief Summary 27
    4.0 REFERENCES 28
    4.1 Ultrasonic Thickness Measurement Procedure 29
    4.2 List of Drawing 30

    OC/ICMS-PCSB/F/1.3 REV. 00
    CONTRACT NO : CHO/2012/SKO-BIE/1000
    PROVISION OF ICMS FOR PCSB

    INSPECTION REPORT REPORT NO. :


    PAGE NO. : 3
    REV NO : A

    1.0 INTRODUCTION
    Inspection Reference
    Platform ID BEP-A Region Betty ( Baram Delta
    Operation )
    Platform Name Betty Production - A
    Inspection Start Date 24th February 2015
    Inspection Finished Date 25th February 2015
    Inspection Headline Jacket leg Inspection
    Type of Inspection Close Visual Inspection ( CVI ) & UT Wall Thickness Measurement

    2.0 INSPECTION SUMMARY


    2.1. Background
    BEP-A is a four legged production platform. The structure was installed on the year 1978 and located in the
    Betty field in 72.85m water depth. The piles are 30 inch outer diameter. The platform is bridge linked to
    BEDP-A, a drilling platform. The platform supports one 6 inch, one 8 inch, one 12 inch, one 16 inch and
    three 10 inch risers. It also support one 24 inch sump pump pipe and a boatlanding. The boatlanding is
    located between row 1 and 2 off face A. The topsides comprises of a Main Deck (EL +14.889m), Cellar Deck
    (EL +10.973m), and sump pump deck (EL +3.05m). The main deck also provides support for a mega skid
    which is cantilevered towards Platform North. The platform has a number of 52 anodes for cathodic
    protection.

    2.2. Scope Details


    The scope of the inspection includes but not limited to UT Thickness Measurement. For the purpose of this
    inspection. This report shall address remaining thickness of the following:
    1. Jacket leg A1
    2. Jacket leg A2
    3. Jacket leg B1
    4. Jacket leg B2

    2.3. Restrictions and Limitation


    Nil.

    OC/ICMS-PCSB/F/1.3 REV. 00
    CONTRACT NO : CHO/2012/SKO-BIE/1000
    PROVISION OF ICMS FOR PCSB

    INSPECTION REPORT REPORT NO. :


    PAGE NO. : 4
    REV NO : A

    2.4. Inspection Tools and Methods


    UT thickness measurement was performed by using 45MG and 0 probe. The UTTG reading was taken on
    the external surface of jacket leg. Tools used in the inspection are listed below:-
    1. 45MG
    Serial No.: 130159606
    Calibration date: 14th August 2014
    Calibration due date: 13th August 2015
    2. Carbon Steel Calibration block
    3. Step wedge block
    4. Camera

    2.5. Outstanding Work


    Nil.

    OC/ICMS-PCSB/F/1.3 REV. 00
    CONTRACT NO : CHO/2012/SKO-BIE/1000
    PROVISION OF ICMS FOR PCSB

    INSPECTION REPORT REPORT NO. :


    PAGE NO. : 5
    REV NO : A

    2.6. Platform Overview

    Photo 1: Platform North View

    2.7. Platform Date


    Platform ID BEP-A
    Platform Name Betty Production Alpha
    Platform Function Production
    Legs 4
    Field Betty
    Year Installed 1978
    Manned No
    Bridge Linked (Location) Yes (BEDP-A to BEP-A)
    Crane 1

    OC/ICMS-PCSB/F/1.3 REV. 00

    You might also like