Elite Coaching Classes

Diploma & Degree Engineering

1. First stage of Product Life Cycle

a) Introduction
b) Growth
c) Maturity
d) Decline
2. Second stage of Product Life Cycle
a) Introduction
b) Growth
c) Maturity
d) Decline
3. Third stage of Product Life Cycle
a) Introduction
b) Growth
c) Maturity
d) Decline
4. Fourth stage of Product Life Cycle
a) Introduction
b) Growth
c) Maturity
d) Decline
5. First stage of Technological life Cycle
a) R & D
b) Ascent Phase
c) Maturity
d) Decline
6. Second stage of Technological life Cycle
a) R & D
b) Ascent Phase
c) Maturity
d) Decline
7. Third stage of Technological life Cycle
a) R & D
b) Ascent Phase
c) Maturity
d) Decline
8. Fourth stage of Technological life Cycle
a) R & D
b) Ascent Phase
c) Maturity
d) Decline
9. Link between CAD & CAM is
a) CAQC

[email protected]
Mo: 8849872113 / 9033768321 Page 1
 Elite Coaching Classes
Diploma & Degree Engineering
b) CAPP
c) CAI
d) BF
10. Types of CAPP are…
a) Variant
b) Generative
c) All of above
d) None of them
11. How many types of CAPP…
a) 2
b) 3
c) 4
d) 5
12. Which is oldest age from following
a) Agrilculture
b) Industrial
c) Information
d) All
13. Which is intermidiate age from following
a) Agrilculture
b) Industrial
c) Information
d) All
14. Which is latest age from following
a) Agrilculture
b) Industrial
c) Information
d) All
15. GT is stand for
a) Group Technology
b) Group Theory
c) Ground Technology
d) Ground Theory
16. How many code are used in GT
a) 2
b) 3
c) 4
d) 5
17. Which is GT code from following
a) Mono
b) Poly
c) Hybrid
d) All
18. Which is not GT code from following

[email protected]
Mo: 8849872113 / 9033768321 Page 2
 Elite Coaching Classes
Diploma & Degree Engineering
a) Mono
b) Poly
c) Hybrid
d) Optiz
19. Mono code is also known as
a) Chain Code
b) Tree Code
c) All of above
d) None of them
20. Poly code is also known as
a) Chain Code
b) Tree Code
c) All of above
d) None of them
21. Hybrid code is also known as
a) Chain Code
b) Tree Code
c) All of above
d) Combination of Mono & Poly code
22. Mono code is also known as
a) Dependent Code
b) Independent Code
c) All of above
d) None of them
23. Poly code is also known as
a) Dependent Code
b) Independent Code
c) All of above
d) None of them
24. How many types of coding system are used in GT?
a) 4
b) 5
c) 6
d) 7
25. Which is most likely used coding system
a) Optiz
b) Kk3
c) Mi class
d) Di class
26. Howmany Code are used in optiz system?
a) 2
b) 4
c) 5
d) 6

[email protected]
Mo: 8849872113 / 9033768321 Page 3
 Elite Coaching Classes
Diploma & Degree Engineering

27. Howmany digits are used in optiz system?

a) 9
b) 10
c) 11
d) 12
28. Optiz system include…
a) Form code
b) Supplementary code
c) Both of them
d) None of them
29. Form code contain……digit
a) 2
b) 3
c) 4
d) 5
30. Supplementary code contain……digit
a) 2
b) 3
c) 4
d) 5
31. Secondary code contain……digit
a) 2
b) 3
c) 4
d) 5
32. Which code is dependent on user?
a) Form code
b) Supplementary code
c) Secondary code
d) All of above
33. Which code describes the primary design attributes of a part?
a) Form code
b) Supplementary code
c) Secondary code
d) All of above
34. Which code describes manufacturing related attributes?
a) Form code
b) Supplementary code
c) Secondary code
d) All of above
35. Which code describes more detail of manufacturing attributes?

[email protected]
Mo: 8849872113 / 9033768321 Page 4
 Elite Coaching Classes
Diploma & Degree Engineering

a) Form code
b) Supplementary code
c) Secondary code
d) All of above
36. Which digit describes whether the part is rotational and also the basic dimension ratio?
a) Digit 1
b) Digit 2
c) Digit 3
d) Digit 4
37. Which digit describes Main external shape; partly dependent on digit 1.?
a) Digit 1
b) Digit 2
c) Digit 3
d) Digit 4
38. Which digit describes Main internal shape?
a) Digit 1
b) Digit 2
c) Digit 3
d) Digit 4
39. Which digit describes Machining requirements for plane surfaces?
a) Digit 1
b) Digit 2
c) Digit 3
d) Digit 4
40. Which digit describes Auxiliary features like additional holes, etc?
a) Digit 5
b) Digit 2
c) Digit 3
d) Digit 4
41. Which digit describes Dimensions?
a) Digit 1
b) Digit 6
c) Digit 3
d) Digit 4
42. Which digit describes Work Material?
a) Digit 1
b) Digit 2
c) Digit 7
d) Digit 4
43. Which digit describes Original Shape of Raw Material?
a) Digit 1
b) Digit 8

[email protected]
Mo: 8849872113 / 9033768321 Page 5
 Elite Coaching Classes
Diploma & Degree Engineering

c) Digit 3
d) Digit 4
44. Which digit describes Accuracy Requirement?
a) Digit 1
b) Digit 2
c) Digit 3
d) Digit 9
45. Optiz system introduced in….
a) India
b) U.K.
c) Japan
d) West Germany
46. KK3 system introduced in….
a) India
b) U.K.
c) Japan
d) West Germany
47. Miclass system introduced in….
a) India
b) U.K.
c) Japan
d) Holland
48. KK3 system contain….digit
a) 9
b) 15
c) 18
d) 21
49. Miclass system contain….digit
a) 9
b) 15
c) 18
d) 12
50. Diclass system contain….digit
a) 25
b) 15
c) 18
d) 8
51. KK3 system include ….. information than Optiz system.
a) More
b) Less
c) Equal

[email protected]
Mo: 8849872113 / 9033768321 Page 6
 Elite Coaching Classes
Diploma & Degree Engineering

52. Detail classification are provided in…

a) Optiz
b) Kk3
c) Miclass
d) Diclass
53. Miclass is…
a) Tree type
b) Chain Type
c) Both
54. Diclass is…
a) Tree type
b) Chain Type
c) Both
55. Howmany types of production layout?
a) 1
b) 2
c) 3
d) 4
56. Which is production layout?
a) Product
b) Process
c) Both of them
57. Product layout is also known as
a) GT
b) Mixed
c) Flexible
58. …….layout is a type of layout where machines are grouped according to the process
requirements for a set of similar items (part families) that require similar processing.
a) Product
b) Process
c) Cellular
59. Cellular manufacturing provides …… processing time.
a) Fast
b) Slow
60. Cellular manufacturing provides …… material handling.
a) less
b) More
61. The collection of parts with similar design characteristics and similar manufacturing
characteristics is known as…..
a) Part family
b) Group technology
c) FMS

[email protected]
Mo: 8849872113 / 9033768321 Page 7
 Elite Coaching Classes
Diploma & Degree Engineering

d) Robotics
62. Howmany Ways to Identify Part Families
a) 1
b) 3
c) 7
d) 9
63. Ways of part family include…
a) Visual Inspection
b) PFA
c) Parts classification and coding
d) All of above
64. PFA is stand for…
a) Production flow analysis
b) Production flow array
c) Process flow analysis
d) Process flow array
65. How many types of cell are used?
a) 2
b) 3
c) 4
d) 5
66. FMS is stand for…
a) Flexible Manufacturing System
b) Flexible Machine System
c) Fixed Manufacturing System
d) Fixed Machine System
67. consists of several machine tools along with part and tool handling devices such
as robots, arranged so that it can handle any family of parts for which it has been
designed and developed.
a) GT
b) Part Family
c) FMS
d) TLC
68. For low variety……used.
a) Transfer line
b) FMS
c) NC Machine
d) All of above
69. For medium variety……used.
a) Transfer line
b) FMS

[email protected]
Mo: 8849872113 / 9033768321 Page 8
 Elite Coaching Classes
Diploma & Degree Engineering

c) NC Machine
d) All of above
70. For high variety……used.
a) Transfer line
b) FMS
c) NC Machine
d) All of above
71. For low quantity……used.
a) Transfer line
b) FMS
c) NC Machine
d) All of above
72. For medium quantity……used.
a) Transfer line
b) FMS
c) NC Machine
d) All of above
100.For high quantity……used.
a) Transfer line
b) FMS
c) NC Machine
d) All of above
101.FMS is used for
a) Low variety & low volume
b) Low variety & high volume
c) Medium variety & medium volume
d) High variety & high volume
102.FMS used…
a) CNC
b) Engine Lathe
c) Capstan Lathe
d) All of above
103. Howmany elements of FMS are used?
a) 5
b) 6
c) 7
d) 8
104. Raw work-parts enter the system at this point is known as
a) Load work station
b) Unload work station
c) Machining work station
d) Assembly work station

[email protected]
Mo: 8849872113 / 9033768321 Page 9
 Elite Coaching Classes
Diploma & Degree Engineering

105. Finished parts exit the system at this point is known as

a) Load work station
b) Unload work station
c) Machining work station
d) Assembly work station
106. Machining of the part done at this point is known as
a) Load work station
b) Unload work station
c) Machining work station
d) Assembly work station
107. Assembly of the part done at this point is known as
a) Unload work station
b) Machining work station
c) Assembly work station
d) Load work station
108. Cleaning of the part done at this point is known as
a) Cleaning work station
b) Unload work station
c) Machining work station
d) Assembly work station
109.Fabrication work is done at
a) Fabrication work station
b) Unload work station
c) Machining work station
d) Assembly work station
110.Machining of non rotational part is done on
a) Pallet
b) Robot
c) All of them
d) None of them
111.ATC is used for.
a) Automatic Tool Changer
b) Automatic Tool Cutter
c) Automatic Tooth Changer
d) Automatic Tooth Cutter
112. Machining station used for machining of rotational part is….
a) CNC turning
b) CNC Machining
c) Tutn mill centre
d) All of above
113. Machining station used for machining of non rotational part is….
a) CNC turning

[email protected]
Mo: 8849872113 / 9033768321 Page 10
 Elite Coaching Classes
Diploma & Degree Engineering

b) CNC Machining
c) Tutn mill centre
d) All of above
114. Machining station used for machining of rotational part with milling & drilling operation
is….
a) CNC turning
b) CNC Machining
c) Tutn mill centre
d) All of above
115. Sheet metal fabrication station is used for
a) Punching
b) Bending
c) Framing
d) All of them
116.Technique for FMS inspection….
a) Machine vision
b) CMM
c) All of them
d) None of above
117. Pallet is used for handling of…….part
a) Non rotational
b) Rotational
c) Prismatic
d) A & C
118. Robot is used for handling of…….part
a) Non rotational
b) Rotational
c) Prismatic
d) A & C
119. Objective of material handling system
a) Random, independent movement of work-parts between stations
b) Temporary storage
c) Convenient access for loading and unloading work-parts
d) All of above
120. Types of material handling system
a) 2
b) 3
c) 4
d) 5
121. Secondary handling system used
a) Transfer devices
b) APC

[email protected]
Mo: 8849872113 / 9033768321 Page 11
 Elite Coaching Classes
Diploma & Degree Engineering

c) Robots
d) All
122. Purposes of the secondary handling system include
a) re-orientation of the part if necessary to present the surface that is to be
processed;
b) to act as buffer storage as the workstation, should this be needed.
c) All of above
d) None of above
123.Vehicle used in AgV
a) Driverless trains
b) Pallet trucks
c) Unit load carriers
d) All of above
124.Driverless trains is used for
a) Heavy load
b) Medium load
c) Low load
125.Pallet truck is used for
a) Heavy load
b) Medium load
c) Low load
126.Unit load carriers is used for
a) Heavy load
b) Medium load
c) Load upto 250 kg
127.Forklift AGV is used in…
a) Driverless trains
b) Pallet trucks
c) Unit load carriers
d) All of above
128. Howmany technology used in AGV?
a) 1
b) 2
c) 3
d) 4
129. Which is path dependent AGV?
a) Wire guided AGV
b) Colour guided AGV
c) Self guided AGV
d) A & C
130. Which is path independent AGV?
a) Wire guided AGV

[email protected]
Mo: 8849872113 / 9033768321 Page 12
 Elite Coaching Classes
Diploma & Degree Engineering

b) Colour guided AGV

c) Self guided AGV
d) A & C
131. Which is modern technique of AGV?
a) Wire guided AGV
b) Colour guided AGV
c) Self guided AGV
d) A & C
132. Self guided AGV include…
a) Dead Reckoning
b) Beacons
c) All of them
d) None of them
133. Capacity of Self guided AGV is indicated by
a) Dead Reckoning
b) Beacons
c) All of them
d) None of them
134. Position of Self guided AGV is indicated by
a) Dead Reckoning
b) Beacons
c) All of them
d) None of them
135. How many parts of ASRS system have?
a) 2
b) 3
c) 4
d) 5
136. ASRS system include…
a) Storage structure
b) S/R machine
c) Storage module
d) All of above
137.….is used to support load
a) Storage structure
b) S/R machine
c) Storage module
d) Pick up & Deposit station
138.….is used to transfer of load
a) Storage structure
b) S/R machine
c) Storage module

[email protected]
Mo: 8849872113 / 9033768321 Page 13
 Elite Coaching Classes
Diploma & Degree Engineering

d) Pick up & Deposit station

139.Howmany layout used in FMS?
a) 3
b) 4
c) 5
d) 6
140. Which of the following is not FMS layout?
a) Inline
b) Ladder
c) Loop
d) GT
141. Simple layout of FMS is….
a) Inline
b) Ladder
c) Loop
d) Robot
142. Movement of material in inline layout is in….direction.
a) 1
b) 2
c) 3
d) 4
143. Rectangular layout of FMS is also known as….
a) Inline
b) Ladder
c) Loop
d) Robot
144. Movement of material in loop layout is in….direction.
a) 1
b) 2
c) 3
d) 4
145. Ladder layout is combination of….layout
a) Inline
b) Ladder
c) Loop
d) Robot
146. Open field layout is combination of….layout
a) Inline
b) Ladder
c) Loop & ladder
d) Robot
147. Open field layout is used for……part family

[email protected]
Mo: 8849872113 / 9033768321 Page 14
 Elite Coaching Classes
Diploma & Degree Engineering

a) Large
b) Small
c) Medium
d) All
148. Robot layout of FMS is used….as a material handling system.
a) Robot
b) AGV
c) Conveyor
d) Belt
149. Robot layout is used for.
a) Square
b) Cylindrical
c) Triangular
d) Rectangular
150.Robot layout is used for.
a) Rotational
b) Non rotational
c) Both
d) None of them
151. is a general purpose, programmable machine possessing certain human like
characteristics.
a) FMS
b) AGV
c) GT
d) Robot
152. is used to connect various arms of robot.
a) Link
b) Joint
c) Gripper
d) Sensor
153. is rigid component of robot.
a) Link
b) Joint
c) Gripper
d) Sensor
154. Base of industrial robot is indicated by…
a) Link 0
b) Link 1
c) Link 2
d) Link 3
155. Howmany joint are used in robot?
a) 2

[email protected]
Mo: 8849872113 / 9033768321 Page 15
 Elite Coaching Classes
Diploma & Degree Engineering

b) 3
c) 4
d) 5
156. Howmany joint are used in robot for linear motion?
a) 2
b) 3
c) 4
d) 5
157. Howmany joint are used in robot for rotational motion?
a) 2
b) 3
c) 4
d) 5
158. Which joint is used in robot for linear motion?
a) Linear joint
b) Rotational joint
c) Twisting joint
d) Revolving joint
159. Which joint is used in robot for linear motion?
a) Orthogonal joint
b) Rotational joint
c) Twisting joint
d) Revolving joint
160. Which joint is used in robot for rotational motion?
a) Rotational joint
b) Twisting joint
c) Revolving joint
d) All of above
161. In linear joint ,link axis are….to each other.
a) Parallel
b) Perpendicular
c) Inclined
d) None of above
162. In orthogonal joint ,link axis are….to each other.
a) Parallel
b) Perpendicular
c) Inclined
d) None of above
163. In rotational joint axis of rotation is… .... input & output link.
a) Parallel
b) Perpendicular
c) Inclined

[email protected]
Mo: 8849872113 / 9033768321 Page 16
 Elite Coaching Classes
Diploma & Degree Engineering

d) None of above
164. In twisting joint axis of rotation is… ..... input & output link.
a) Parallel
b) Perpendicular
c) Inclined
d) None of above
165. In revolving joint, input & output link axis is….to each other.
a) Parallel
b) Perpendicular
c) Inclined
d) None of above
166. In revolving joint axis of rotation is……..input & ......... output link.
a) Parallel , perpendicular
b) Perpendicular , parallel
c) Inclined
d) None of above
167.Linear joint is also known as
a) Type L
b) Type O
c) Type R
d) Type T
168. Orthogonal joint is also known as
a) Type L
b) Type O
c) Type R
d) Type T
169. Rotational joint is also known as
a) Type L
b) Type O
c) Type R
d) Type T
170. Twisting joint is also known as
a) Type L
b) Type O
c) Type R
d) Type T
171. Revolving joint is also known as
a) Type L
b) Type O
c) Type R
d) Type V
172. Robot structure & its arrangement is called.

[email protected]
Mo: 8849872113 / 9033768321 Page 17
 Elite Coaching Classes
Diploma & Degree Engineering

a) Link
b) body
c) Gripper
d) Sensor
173.Generally DOF on joint.
a) 1
b) 2
c) 3
d) 4
174. DOF at some joint in modern robot.
a) 0
b) 1
c) More than 1
175. Part at the end of the robot arm is ….
a) Link
b) body
c) End - effector
d) Sensor
176. In pick & place type robot……is used as end effector.
a. Link
b. body
c. Gripper
d. Sensor
177. Maximum distance covered by end effector is….
a) Maximum reach
b) Minimum reach
c) Work volume
d) Work area
178. Work volume of Cartesian robot is….
a) Rectangular
b) Cylindrical
c) Hemispherical
d) Square
179. Work volume of Cylindrical robot is….
a) Rectangular
b) Cylindrical
c) Hemispherical
d) Square
180. Work volume of polar robot is….
a) Rectangular
b) Cylindrical
c) Hemispherical

[email protected]
Mo: 8849872113 / 9033768321 Page 18
 Elite Coaching Classes
Diploma & Degree Engineering

d) Square
181. Work volume of jointed arm robot is….
a) Rectangular
b) Cylindrical
c) Hemispherical
d) Square
182. Work volume of SCARA robot is….
a) Rectangular
b) Cylindrical
c) Hemispherical
d) Square
183. Weight lifted by robot is called.
a) Load
b) Payload
c) Carrying capacity
d) B & C
184. Robot structure is divided into…..parts.
a) 2
b) 3
c) 4
d) 5
185. Notation of Cartesian robot is…
a) TRL
b) TLO
c) LOO
d) VVR
186. Notation of polar robot is…
a) TRL or TRO
b) TLO
c) LOO
d) VVR
187. Notation of Cylindrical robot is…
a) TRL
b) TLO
c) LOO
d) VVR
188. Notation of jointed arm robot is…
a) TRL or VVR
b) TLO
c) LOO
d) VVR
189. Notation of SCARA robot is…

[email protected]
Mo: 8849872113 / 9033768321 Page 19
 Elite Coaching Classes
Diploma & Degree Engineering

a) TRL
b) TLO
c) LOO
d) VRO
190. Which type of robot is similar to human hand?
a) Cartesian
b) Cylindrical
c) Jointed arm
d) Polar
191. Which type of robot updated version of Jointed arm robot?
a) Cartesian
b) Cylindrical
c) SCARA
d) Polar
192. Cartesian robot is also known as.
a) L-L-L
b) L-R-L
c) R-R-L
d) R-R-R
193. Cylindrical robot is also known as.
a) L-L-L
b) L-R-L
c) R-R-L
d) R-R-R
194. Polar robot is also known as.
a) L-L-L
b) L-R-L
c) R-R-L
d) R-R-R
195. Jointed arm robot is also known as.
a) L-L-L
b) L-R-L
c) R-R-L
d) R-R-R
196. Cartesian robot have… linear motion & …..rotational motion.
a) 3 & 0
b) 2 & 1
c) 1 & 2
d) 0 & 3
197. Cylindrical robot have… linear motion & …..rotational motion.
a) 3 & 0
b) 2 & 1

[email protected]
Mo: 8849872113 / 9033768321 Page 20
 Elite Coaching Classes
Diploma & Degree Engineering

c) 1 & 2
d) 0 & 3
198. Polar robot have… linear motion & …..rotational motion.
a) 3 & 0
b) 2 & 1
c) 1 & 2
d) 0 & 3
199. Jointed arm robot have… linear motion & …..rotational motion.
a) 3 & 0
b) 2 & 1
c) 1 & 2
d) 0 & 3
200. How many coordinate system used in robot programming?
a) 1
b) 2
c) 3
d) 4
201. Types of DOF of robot…
a) 3
b) 4
c) 6
d) 7
202. Types of motion of robot…
a) 3
b) 4
c) 6
d) 7
203. Types of motion of robot arm & body…
a) 3
b) 4
c) 6
d) 7
204. Types of motion of robot wrist…
a) 3
b) 4
c) 6
d) 7
205. Movement of wrist in up-down position is called.
a) Pitch
b) Roll
c) Yaw
d) All of above

[email protected]
Mo: 8849872113 / 9033768321 Page 21
 Elite Coaching Classes
Diploma & Degree Engineering

206. Movement of wrist in right - left position is called.

a) Pitch
b) Roll
c) Yaw
d) All of above
207. Movement of wrist in rotational position is called.
a) Pitch
b) Roll
c) Yaw
d) All of above
208.Prismatic joint have…
a) Linear
b) Rotational
c) All of above
d) None of above
209.Revolute joint have…
a) Linear
b) Rotational
c) All of above
d) None of above
210. How many structure elements used in manipulator?
1) 2
2) 3
3) 4
4) 5
211. For material handling……is used.
a) Link
b) Joint
c) Gripper
d) Sensor
212. How many types of gripper are used in robot?
a) 2
b) 3
c) 4
d) 5
213. How many types of mechanical gripper are used in robot?
a) 2
b) 3
c) 4
d) 5
214. Which gripper is popular in robotics?
a) Mechanical

[email protected]
Mo: 8849872113 / 9033768321 Page 22
 Elite Coaching Classes
Diploma & Degree Engineering

b) Vaccum
c) Magnetic
d) Adhesive
215. Which gripper is used for flat, smooth & clean workpiece?
a) Mechanical
b) Vaccum
c) Magnetic
d) Adhesive
216. Which gripper is used for ferrous material?
a) Mechanical
b) Vaccum
c) Magnetic
d) Adhesive
217. Which gripper is used for paper & cloth?
a) Mechanical
b) Vaccum
c) Magnetic
d) Adhesive
218. Which gripper is similar to human hand?
a) Multiple finger
b) Dual
c) Standard
d) Inter changeable
219. In which gripper magnet is used?
a) Mechanical
b) Vaccum
c) Magnetic
d) Adhesive
220. Which gripper is used for low weight?
a) Mechanical
b) Vaccum
c) Magnetic
d) Adhesive
221. ……is a electronic transducer to measure any physical quantity.
a) Gripper
b) Link
c) Sensor
d) Joint
222. How many types of sensor are used in robot?
a) 2
b) 3
c) 4

[email protected]
Mo: 8849872113 / 9033768321 Page 23
 Elite Coaching Classes
Diploma & Degree Engineering

d) 5
223. Force sensor is…..
a) Contact type
b) Non-contact type
c) Both of above
d) None of above
224. Tactile sensor is…..
a) Contact type
b) Non-contact type
c) Both of above
d) None of above
225. Proximity sensor is…..
a) Contact type
b) Non-contact type
c) Both of above
d) None of above
226. Range sensor is…..
a) Contact type
b) Non-contact type
c) Both of above
d) None of above
227. Visual sensor is…..
a) Contact type
b) Non-contact type
c) Both of above
d) None of above
228. Strain gauge is used in….sensor.
a) Force
b) Range
c) Visual
d) Proximity
229. To check availability of part at specific position….sensor is used.
a) Force
b) Range
c) Visual
d) Proximity
230.LDR is used in….sensor.
a) Force
b) Range
c) Visual
d) Proximity
231. To check distance between part ….sensor is used.

[email protected]
Mo: 8849872113 / 9033768321 Page 24
 Elite Coaching Classes
Diploma & Degree Engineering

a) Force
b) Range
c) Visual
d) Proximity
232. Optical, Radar & IR is…..sensor.
a) Force
b) Range
c) Visual
d) Proximity
233. Robot programming may be.
a) Online
b) Offline
c) Both
d) None of above
234.Which language is popular?
a) Point to point motion
b) High level programming language
c) Object oriented
d) Task oriented
235. Which language is mostly used?
a) VAL
b) AL
c) AML
d) RAIL
236. Which language is introduced for PUMA robot?
a) VAL
b) AL
c) AML
d) RAIL
237. In VAL robot motion is decided by.
a) Textual statement
b) Lead through technique
c) Both
d) None of above
238. In VAL robot orientation is decided by.
a) Textual statement
b) Lead through technique
c) Both
d) None of above
239. is a system which is used to direct, command or regulates itself or another system.
a) Control system
b) Robot

[email protected]
Mo: 8849872113 / 9033768321 Page 25
 Elite Coaching Classes
Diploma & Degree Engineering

c) FMS
d) GT
240. Which control system is simple?
a) Open loop
b) Closed loop
c) Both of them
d) None of them
241. Which control system is complex?
a) Open loop
b) Closed loop
c) Both of them
d) None of them
242. Which control system is less costly?
a) Open loop
b) Closed loop
c) Both of them
d) None of them
243. Which control system more costly?
a) Open loop
b) Closed loop
c) Both of them
d) None of them
244. Which control system is more stable?
a) Open loop
b) Closed loop
c) Both of them
d) None of them
245. Which control system is less stable?
a) Open loop
b) Closed loop
c) Both of them
d) None of them
246. Which control system is more accurate?
a) Open loop
b) Closed loop
c) Both of them
d) None of them
247. Which control system is less accurate?
a) Open loop
b) Closed loop
c) Both of them
d) None of them

[email protected]
Mo: 8849872113 / 9033768321 Page 26
 Elite Coaching Classes
Diploma & Degree Engineering

248. Which control system required feedback?

a) Open loop
b) Closed loop
c) Both of them
d) None of them
249. Which control system not required feedback?
a) Open loop
b) Closed loop
c) Both of them
d) None of them
250.Servomechanism is working like.
a) Open loop system
b) Closed loop system
c) Both of them
d) None of them
251. Method by which automatic controller produces the control signal is called….
a) Control action
b) Control system
c) Control error
d) Feedback
252. ON-OFF control action is used in….
a) Air conditioning system
b) Water heater
c) Room heater
d) All of above
253. Rate control action is also known as….control action.
a) ON-OFF
b) Proportional
c) Derivative
d) Integral
254. Which control action is not used alone?
a) Proportional
b) Derivative
c) Integral
d) B & C
255. Number of input in OR gate.
a) 1
b) 2
c) >2
d) ≥2
256. Number of input in AND gate.
a) 1

[email protected]
Mo: 8849872113 / 9033768321 Page 27
 Elite Coaching Classes
Diploma & Degree Engineering

b) 2
c) >2
d) ≥2
257. Number of input in NOR gate.
a) 1
b) 2
c) >2
d) ≥2
258. Number of input in NAND gate.
a) 1
b) 2
c) >2
d) ≥2
259. Number of input in EX-OR gate.
a) 1
b) 2
c) >2
d) ≥2
260. Number of input in EX-NOR gate.
a) 1
b) 2
c) >2
d) ≥2
261. Number of input in NOT gate.
a) 1
b) 2
c) >2
d) ≥2
262. Number of output in any gate.
a) 1
b) 2
c) >2
d) ≥2
263. Output condition of gate, excluding NOT gate.
a) 2n

b) 2(2n)
c) 2(n-1)
d) 2(n+1)
264. The Boolean expression for a 2-input OR gate is
a) Y = A+B
b) Y = A.B
c) Y = A+B+C

[email protected]
Mo: 8849872113 / 9033768321 Page 28
 Elite Coaching Classes
Diploma & Degree Engineering

d) Y = A.B.C
265. The Boolean expression for a 2-input AND gate is
a) Y = A+B
b) Y = A.B
c) Y = A+B+C
d) Y = A.B.C
266. The Boolean expression for a 3-input OR gate is
a) Y = A+B
a) Y = A.B
b) Y = A+B+C
c) Y = A.B.C
267. The Boolean expression for a 3-input AND gate is
a) Y = A+B
b) Y = A.B
c) Y = A+B+C
d) Y = A.B.C
268. Which gate is known as not OR gate?
a) NOR
b) AND
c) NAND
d) NOT
269. Which gate is known as not AND gate?
a) NOR
b) AND
c) NAND
d) NOT
270. Which gate is known as special OR gate?
a) NOR
b) AND
c) EX-OR
d) NOT
271.PLC is stand for.
a) Programmable Logic Controller
b) Product Life Cycle
c) Both of above
d) None of above
272.Which are elements of PLC?
a) CPU
b) Memory Circuits
c) Input & Output circuit
d) All

[email protected]
Mo: 8849872113 / 9033768321 Page 29
 Elite Coaching Classes
Diploma & Degree Engineering

273. …is used to send commands, programme and receives monitoring information from the
remote locations.
a) PLC
b) Telemetry
c) Data acquition
d) Robot
274. …is used to measure parameter
a) PLC
b) Telemetry
c) Data acquition
d) Robot
275. How many software used in SCADA?
a) 2
b) 3
c) 4
d) 5
276. Which is SCADA software?
a) Proprietary
b) Open software
c) All of above
d) None of above
277.Programming language used in CNC…
a) Fanuc
b) Sinumeric
c) Hust
d) All
278.How many types of port are used in micro controller?
a) 2
b) 3
c) 4
d) 5
279.4 bit micro controller is used for…
a) Toys
b) Industry level
c) Robotics
d) Telecommunication
280.8 bit micro controller is used for…
a) Toys
b) Industry level
c) Robotics
d) Telecommunication
281.16 bit micro controller is used for…

[email protected]
Mo: 8849872113 / 9033768321 Page 30
 Elite Coaching Classes
Diploma & Degree Engineering

a) Toys
b) Industry level
c) Robotics
d) DVR
282.Data Retrieval method is also known as
a) Variant CAPP
b) Generative CAPP
c) Both
d) None of above
283.Technology include in CIM…
a) CNC
b) DNC
c) CAPP
d) All of above
284.CIM used in…
a) Product Design
b) Inventory
c) Purchasing
d) All of above
285. How many protocol used in CIM?
a) 2
b) 3
c) 4
d) 5
286. How many layer used in OSI Model?
a) 2
b) 3
c) 7
d) 8
287.ANN is used for
a) Artificial Neural Network
b) Automatic Neural Network
c) Artificial Natural Network
d) Automatic Natural Network
288.ANN is work related to.
a) Human brain
b) Human body
c) Human hand
d) All of above

[email protected]
Mo: 8849872113 / 9033768321 Page 31