Scribd
Upload
95 views2 pages

Technicaldata: Technical Data Sheetf Testing

This document provides technical specifications for E-100, a one-component polyurethane sealant for automotive glass replacement. E-100 has an odorless black homogeneous paste appearance, density of 1.35g/cm3, and cures within 20-60 minutes. It exhibits good extrudability, adhesion properties, and flexibility with shore hardness of 50-60A and elongation over 400%. E-100 is suitable for bonding windshields and side windows to vehicle frames.

Uploaded by

Tan Yann Jiun
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
95 views2 pages

Technicaldata: Technical Data Sheetf Testing

This document provides technical specifications for E-100, a one-component polyurethane sealant for automotive glass replacement. E-100 has an odorless black homogeneous paste appearance, density of 1.35g/cm3, and cures within 20-60 minutes. It exhibits good extrudability, adhesion properties, and flexibility with shore hardness of 50-60A and elongation over 400%. E-100 is suitable for bonding windshields and side windows to vehicle frames.

Uploaded by

Tan Yann Jiun
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

7//'

Page 1 of 2
TechnicalData Sheet
E-1 00

&roo
Odourless Adhesire Sealant for Automotive Glass Reolacenrent
1. TECHNICAL DATA SHEETf :

Testing ltenrs@ Perfornnnce


Appearance Black,
homogeneous paste
Density(g/cm3) 1.35r0.05
Note,
Sa gging properties(mm) 0
OAll data above were tesed under
Tack free time (min) 20-60
9a ndardized condition d 23a 2'C. 50+solfi H,
Curing speed(mm/d) >3.0
OAll dab lided in the chart were for fre
Volatile content(%) <3
generalized item in the seriesi please refer
Shore A-hardness 5015
to t|e related data sheetfor special items.
Tensile strength(MPa) >4.0
@Storage condition has a direct impact on
Elongation at break(7o) >400
the products shelf life, dease refer to he
Tensile-shear strength(MPa) >2.5
in$ruction for geoal items $onng.
Extrudability(mUmin) >80
App lication tem perature(C ) +5-+35

Shelf life(month)@ I

2. DESCRIPTION:

E-100 is one component polyurethane sealant for automotive glass replacement, it has a
good performance such as odourless, good extrudability, easy for disassembling and
repairin g, conveni ent for applicatio n.

-.i

USES:

Suitable for adhesion between windshieldiside glass and frame of cars, buses and special
ve hicles.

3. CLEANING:
Clean and dry all surfaces by remoMng foreign matters and contaminants such as oil stain,
grease, ftost, water, dirt, old sealants and any protectiw coating, Dust and loose particles
should be cleaned.
Page 2 of 2

Technical Data Sheet


E-100

4, PACKAGING:
x 310m1 cartridge, 20 Pcs/carton
x 600m1/400m1 sausage, 20 pcs/carton

5. APPLICATION:
* areas'
Refer to related construction technology for different application
xProductVscosityincreaseandextrudabilitydecreasewhlntemperatureislower
5C,inthatcase'WesuggesttoheatitforlHat3040t(notmorethan3H).
* Use the "V" form of nozzle and the gun to construction'
with soap and water'
* Joints can be flattened with scraper, details can be smoothed

6. ADVANTAGES;
* No volatile smell, no peculiar smell affer curing'
x Smooth appearance.
* Good extrudability, good anti-sagging property' easy for
application'
* Moderate hardness, easy for disassembling and repairing'
* Good bonding and sealing performance'

7. ADVICE:
be caused
* Please construct by application instructions strictly, failure of stickiness may
by any operation disobeying construction techniques'
* Curing rate will decrease in not well ventilated or low
temperature circumstances'

* period, remove the sealant inside


check and make sure the product is still in guarantee
plastic nozzle when use again'
* or soil'
Don't throw uncured sealant or primer into sewer' water
* Keep away from children.
* This product is innocuous aftercuring completely, but before
set, please avoid contacting
with eyes and skin. ln case of skin contact, wipe with cloth' then
wash with soap and
contact a doctor immediately'
water, if contact with eyes, wash with water thoroughly and

I
8. PRIMING:
Actiwtor and primer are not required'

You might also like