Scribd
Upload
48 views1 page

EEEB283 Diagnostic Quiz: (2 Marks)

This document contains a 5-question diagnostic quiz for the EEEB283 course. Question 1 asks to find resistor values to achieve a given voltage ratio and equivalent resistance. Question 2 asks to determine the Thevenin equivalent circuit of a battery connected to a resistor. Question 3 asks to calculate an output voltage given resistor values in a circuit. Question 4 asks to calculate real and reactive power delivered to a load. Question 5 asks to calculate line current and voltage for a 3-phase source delivering power to a wye-connected load.

Uploaded by

zawir gulam
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
48 views1 page

EEEB283 Diagnostic Quiz: (2 Marks)

This document contains a 5-question diagnostic quiz for the EEEB283 course. Question 1 asks to find resistor values to achieve a given voltage ratio and equivalent resistance. Question 2 asks to determine the Thevenin equivalent circuit of a battery connected to a resistor. Question 3 asks to calculate an output voltage given resistor values in a circuit. Question 4 asks to calculate real and reactive power delivered to a load. Question 5 asks to calculate line current and voltage for a 3-phase source delivering power to a wye-connected load.

Uploaded by

zawir gulam
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

EEEB283 Diagnostic Quiz

Student Name: ID No:

Question 1 [2 marks]
Find R1 and R2 so that Vo/Vs= 0.05 and Req =40k

Question 2 [2 marks]
When connected to a 4- resistor, a battery has a terminal voltage of 10.8 V, but produces 12V on an
open circuit. Determine the Thevenin equivalent circuit for the battery.

Question 3 [2 marks]
Determine Vo if R1= - j5  , R2 = 4 , R3 = j4  and Vs= 40V.

Question 4 [2 marks]
A load Z draws 12 kVA at a power factor of 0.856 lagging from a 120V–rms, 60-Hz sinusoidal source.
Calculate the real and reactive power delivered to the load.

Question 5 [2 marks]
A three-phase source delivers 9.6 kVA to a wye-connected load with a phase voltage of 208V and a
power factor of 0.9 lagging. Calculate source line current and the source line voltage.

You might also like