Scribd
Upload
693 views4 pages

Engine Timing Gear A40F

The document describes the engine timing gear and belt transmission system on a vehicle. It details the components of the timing gear including the timing gear plate and various gears. It then describes the multi-groove belt transmission system that drives components like the coolant pump and alternator, and includes diagrams of belt layouts for different engine configurations.

Uploaded by

MrAlbert2009
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
693 views4 pages

Engine Timing Gear A40F

The document describes the engine timing gear and belt transmission system on a vehicle. It details the components of the timing gear including the timing gear plate and various gears. It then describes the multi-groove belt transmission system that drives components like the coolant pump and alternator, and includes diagrams of belt layouts for different engine configurations.

Uploaded by

MrAlbert2009
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Service Information

Document Title: Function Group: Information Type: Date:


Engine timing gear, 215 Service Information 10/13/2011
description
Profile:
ART, A40F (37535) [GB]

Engine timing gear, description


Engine timing gear
The engine has a rear-mounted timing gear on a 6 mm thick steel plate (1).
The timing gear plate is fastened to the cylinder block with a number of M8-bolts (as well as an M10–bolt) and is sealed against
the cylinder block and cylinder head with sealant. The sealant is applied in a bead on the plate.
On the timing gear plate there is a drilled hole which, with the markings on the camshaft gear (A), are used together to enable
correct installation of the camshaft gear.
The crankshaft gear and the double transfer gear are marked together (B) for correct installation.
Figure 1
V1083625

1. Timing gear plate


2. Gear, crankshaft
3. Transfer gear, double
4. Not used
5. Transfer gear, adjustable
6. Camshaft gear
7. Drive gear, air compressor
8. Drive gear, fuel feed pump
9. Transfer gear
10. Drive gear, lubrication oil pump
11. Vibration damper with teeth for inductive camshaft sensor

A. Hole for guide pin


B. Marking for crankshaft
Belt transmission, description
The belt transmission is located at the front end of the engine and has three multi-groove drive belts.

y The drive belt (3) drives the coolant pump (1), while the belt tensioner (7) keeps the belt tight.
y The drive belt (2) drives the alternator (and AC compressor if installed), while the belt tensioner (6) keeps the belt tight.

Belt transmission for engine without diesel particle filter

Figure 2
The figure shows engine D16F

1. Coolant pump
2. Drive belt
3. Drive belt
4. AC Compressor
5. Alternator
6. Belt tensioner
7. Belt tensioner

y The drive belt (3) drives the coolant pump (1), while the belt tensioner (8) keeps the belt tight.
y The drive belt (2) drives the alternator (and AC compressor if installed), while the belt tensioner (9) keeps the belt tight.
y The drive belt (7) drives the air pump (6), while the belt tensioner (10) keeps the belt tight.

Belt transmission for engine with diesel particle filter

Figure 3
The figure shows engine D16H
1. Coolant pump
2. Drive belt
3. Drive belt
4. AC Compressor
5. Alternator
6. Air pump
7. Drive belt
8. Belt tensioner, coolant pump
9. Belt tensioner, AC compressor and alternator
10. Belt tensioner, air pump
11. Drive gear, air pump

You might also like