STRAPJACK™

Low Profile Pumping Unit

Ideal for Rod Pumping Under Irrigation Systems
and Visually Sensitive Areas
The Strapjack™ unit combines
maximum stroke length and minimum
height requirements allowing it to
operate continuously under active
irrigation systems.The Strapjack™ unit
is uniquely suited for special
applications where visual impact should
be minimized. With its “low profile”
design, the Strapjack reduces the visual
impact in sensitive areas such as parks
and residential areas, improving land
owner relations.

Features & Benefits

! Low clearance requirements, such as
rod pumping under sprinkler systems
! Design allows for shallow cellar
depths, as required ! Units are easily moved
! Eliminates or reduces the expense of ! Sampson post third leg folds for easy well servicing
pumping water from cellars
! May eliminate the costs associated
with confined entry
! Enhanced safety in H2S areas
! Upstroke/downstroke velocities are
essentially equal
! Higher minimum polished rod load
than other low profile designs
! Designed to operate without a
horsehead
! Ships fully assembled for reduced
setting time and costs
 A

D D2

C B E

Engineered UNIT SIZE A B C D D2 E

114-173-54-8' 8' 25" 218 3/4" 17" 22" 79 1/2"
For Safety and 160-173-54-8' 8' 25" 218 3/4" 17" 22" 79 1/2"
Economy 160-200-74-10' 10' 32" 276" 18" 28" 88"
228-246-74-10' 10' 32" 276" 18" 28" 88"
The Strapjack is designed 320-246-74-10' 10' 32" 276" 18" 28" 88"
so that at the bottom of 228-246-84-11 1/2" 11' 6" 37 1/2" 276" 26" 36" 88"
the downstroke, the
320-246-84-11 1/2" 11' 6" 37 1/2" 276" 26" 36" 88"
carrier bar is still well
above the bottom of the
unit skid. This means
that wellhead cellars can Installation and Maintenance
be much shallower and in
some cases eliminated. The Strapjack unit is pre-assembled, and shipped in one piece, allowing
In most cases where a for fast and easy set up and moves. Well maintenance is simplified by a
cellar is required they are folding sampson post assembly. By simply removing a pin on the third leg
less than 4' deep and disconnecting the carrier bar from the polished rod, the sampson post
eliminating the “confined and roller assembly can be quickly and easily folded back away from the
entry” designation, saving wellhead. This feature maximizes work space and safety during pulling or
considerable servicing operations. The entire unit can be installed and ready for use in
maintenance expense. just a few hours.

Worldwide Customer Service

515 Post Oak Blvd., Suite 600, Houston, Texas 77027
Phone: 713-693-4000
Fax: 713-693-4323 Weatherford products and services are subject toWeatherford’sstandardtermsand
conditions. For more information concerning thefulllineofWeatherfordproductsand
www.weatherford.com services,pleasecontactyourauthorizedWeatherford representative.Unlessnoted
otherwise, trademarks and service marks noted herein arethepropertyofWeatherford.

© Copyright 2002 Weatherford · All rights reserved · ALS7008.01 · 04/02 · Printed in U.S.A.
STRAPJACK™
Low Profile Pumping Unit
Ideal for Rod Pumping Under Irrigation Systems
and Visually Sensitive Areas
The Strapjack™ unit combines
maximum stroke length and minimum
height requirements allowing it to
operate continuously under active
irrigation systems.The Strapjack™ unit
is uniquely suited for special
applications where visual impact should
be minimized. With its “low profile”
design, the Strapjack reduces the visual
impact in sensitive areas such as parks
and residential areas, improving land
owner relations.

Features & Benefits

! Low clearance requirements, such as
rod pumping under sprinkler systems
! Design allows for shallow cellar
depths, as required ! Units are easily moved
! Eliminates or reduces the expense of ! Sampson post third leg folds for easy well servicing
pumping water from cellars
! May eliminate the costs associated
with confined entry
! Enhanced safety in H2S areas
! Upstroke/downstroke velocities are
essentially equal
! Higher minimum polished rod load
than other low profile designs
! Designed to operate without a
horsehead
! Ships fully assembled for reduced
setting time and costs
 A

D D2

C B E

Engineered UNIT SIZE A B C D D2 E

114-173-54-8' 8' 25" 218 3/4" 17" 22" 79 1/2"
For Safety and 160-173-54-8' 8' 25" 218 3/4" 17" 22" 79 1/2"
Economy 160-200-74-10' 10' 32" 276" 18" 28" 88"
228-246-74-10' 10' 32" 276" 18" 28" 88"
The Strapjack is designed 320-246-74-10' 10' 32" 276" 18" 28" 88"
so that at the bottom of 228-246-84-11 1/2" 11' 6" 37 1/2" 276" 26" 36" 88"
the downstroke, the
320-246-84-11 1/2" 11' 6" 37 1/2" 276" 26" 36" 88"
carrier bar is still well
above the bottom of the
unit skid. This means
that wellhead cellars can Installation and Maintenance
be much shallower and in
some cases eliminated. The Strapjack unit is pre-assembled, and shipped in one piece, allowing
In most cases where a for fast and easy set up and moves. Well maintenance is simplified by a
cellar is required they are folding sampson post assembly. By simply removing a pin on the third leg
less than 4' deep and disconnecting the carrier bar from the polished rod, the sampson post
eliminating the “confined and roller assembly can be quickly and easily folded back away from the
entry” designation, saving wellhead. This feature maximizes work space and safety during pulling or
considerable servicing operations. The entire unit can be installed and ready for use in
maintenance expense. just a few hours.

Worldwide Customer Service

515 Post Oak Blvd., Suite 600, Houston, Texas 77027
Phone: 713-693-4000
Fax: 713-693-4323 Weatherford products and services are subject toWeatherford’sstandardtermsand
conditions. For more information concerning thefulllineofWeatherfordproductsand
www.weatherford.com services,pleasecontactyourauthorizedWeatherford representative.Unlessnoted
otherwise, trademarks and service marks noted herein arethepropertyofWeatherford.

© Copyright 2002 Weatherford · All rights reserved · ALS7008.01 · 04/02 · Printed in U.S.A.