The Refraction of Light: Lenses and Optical Instruments

Chapter 23
The Refraction of
Light: Lenses and
Optical Instruments
Lenses
Converging and diverging lenses.
Lenses refract light in such a way that an image of the light source is
formed.
With a converging lens, paraxial rays that are parallel to the principal
axis converge to the focal point, F. The focal length, f, is the distance
between F and the lens.
Two prisms can bend light

toward the principal axis acting
like a crude converging lens but
cannot create a sharp focus.
Lenses
With a diverging lens, paraxial rays that are parallel to the principal
axis appear to originate from the focal point, F. The focal length, f, is
the distance between F and the lens.
Two prisms can bend light

away from the principal axis
acting like a crude diverging
lens, but the apparent focus
is not sharp.
Lenses
Converging and diverging lens come in a variety of shapes depending

on their application.
We will assume that the thickness of a lens is small compared with its
focal length è Thin Lens Approximation
The Formation of Images by Lenses
RAY DIAGRAMS. Here are some useful rays in determining the nature
of the images formed by converging and diverging lens.
Since lenses pass light through them (unlike mirrors) it is useful to draw
a focal point on each side of the lens for ray tracing.
IMAGE FORMATION BY A CONVERGING LENS
do > 2f
When the object is placed further than twice the focal length
from the lens, the real image is inverted and smaller than
the object.
This is the configuration for a camera. The focal length of the

lens system of a camera must be adjusted for a particular object
distance so that the image distance is at the location of the film
and thus the real image on the film is sharp (focused).
2f > do > f
When the object is placed between F and 2F, the real image is
inverted and larger than the object.
This is the configuration for a projector. Since you normally want

the real image on the screen to be upright, the object (film or slide)
is placed upside down in the projector.
f > do
When the object is placed between F and the lens, the virtual image is
upright and larger than the object.
This is the configuration for a magnifying glass. The magnifying glass

must clearly be positioned so that the object distance is less than its
focal length
IMAGE FORMATION BY A DIVERGING LENS
all do
A diverging lens always forms an upright, virtual, diminished image.

The Thin-Lens Equation and the Magnification Equation
Thin lens equation Magnification equation

1 1 1 hi di
+ = m= =−
do di f ho do
These equations are identical to the mirror equations!
The sign conventions are similar to those for mirrors, but there are
a few differences……
Summary of Sign Conventions for Lenses
f is + for a converging lens.

f is − for a diverging lens.
d o is + if the object is to the left of the lens.
d o is − if the object is to the right of the lens.*
d i is + for an image formed to the right of the lens (real image).

d i is − for an image formed to the left of the lens (virtual image).
m is + for an upright image.

m is − for an inverted image.
* can occur in the case of imaging with more than one lens.
Example. The Real Image Formed by a Camera Lens

A 1.70-m tall person is standing 2.50 m in front of a camera. The
camera uses a converging lens whose focal length is 0.0500 m.
(a) Find the image distance and determine whether the image is
real or virtual. (b) Find the magnification and height of the image
on the film.
1 1 1 1 1
(a) = − = − = 19.6 m −1
d i f d o 0.0500 m 2.50 m
d i = 0.0510 m real image, since di > 0
di 0.0510 m image inverted, since m < 0

(b) m=− =− = −0.0204
do 2.50 m and reduced since |m| < 1
hi = mho = (-0.0204)(1.70 m) = -0.0347 m

Example. The Virtual Image Formed by a Diverging Lens

An object is placed 7.10 cm to the left of a diverging lens whose focal
length is f = -5.08 cm. (a) Find the image distance and determine
whether the image is real or virtual. (b) Obtain the magnification.
1 1 1 1 1
(a) 
= − = − = −0.338 cm −1
di f do (−5.08) 7.10
di = −2.96 cm virtual image, since di < 0
(b)
di
m=− =−
( −2.96 )
= 0.417 image upright, since m > 0
do 7.10 and reduced since |m| < 1
Example of a two-lens system: Two converging lenses each of focal
length 20 mm are separated by 30 mm from each other. An object is
placed at 28 mm in front of the first lens. Find the final image distance
and final magnification of this two-lens system.
f1 f2
Lens 1 Lens 2
F1 F2 F1 F2
do1 l di2
di1
do2
f1 = f2 = 20 mm
l = 30 mm
do1 = 28 mm
Find di2 and m
1 1 1 1 1
Lens 1: = − = − = 0.0143 mm −1 ⇒ di1 = 70 mm
di1 f1 do1 20 28 real image
virtual object for Lens 1
do2 = − ( di1 − l ) = − ( 70 − 30 ) = −40 mm for Lens 2
1 1 1 1 1
Lens 2 : = − = − = 0.075 mm −1 ⇒ di2 = 13 mm
di2 f2 do2 20 (−40 ) real image
for Lens 2
# di1 &# di2 & # 70 &# 13 &
m = m1m2 = % − (% − final image inverted
( = % − (%% − (( = −0.81
and reduced
$ do1 '$ do2 ' $ 28 '$ (−40 ) '
Chapter 24
Interference and the

Wave Nature of Light
Huygens’ principle
Every point on a wave front acts as a source

of tiny wavelets that move forward with the same
speed as the wave; the wave front at a latter
instant is the surface that is tangent to the
wavelets.
Diffraction is the bending of waves around

obstacles or the edges of an opening.
The extent of the diffraction increases as the ratio of the wavelength

to the width of the opening increases since there is less cancelling
from adjacent Huygens’ wavelets.
The Derivation of
Snell’s Law
f is same in each c v λ v λ " c%

medium but v λ = ⇒ λ1 = 1 = and λ2 = 2 = $n = '
and λ are different f f n1 f n2 # v&
λ1 λ n1 λ λ2 λ n2 λ
sin θ1 = = = sin θ 2 = = =
h h hn1 h h hn2
λ Snell’s
n1 sin θ1 = = n2 sin θ 2 ⇒ n1 sin θ1 = n2 sin θ 2
h Law

The Refraction of Light: Lenses and Optical Instruments

Uploaded by

Copyright:

Available Formats

The Refraction of Light: Lenses and Optical Instruments

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

The Refraction of Light: Lenses and Optical Instruments

Uploaded by

Copyright:

Available Formats

Chapter 23

Converging and diverging lenses.

Two prisms can bend light

Two prisms can bend light

Converging and diverging lens come in a variety of shapes depending

IMAGE FORMATION BY A CONVERGING LENS

This is the configuration for a camera. The focal length of the

IMAGE FORMATION BY A CONVERGING LENS

This is the configuration for a projector. Since you normally want

IMAGE FORMATION BY A CONVERGING LENS

This is the configuration for a magnifying glass. The magnifying glass

IMAGE FORMATION BY A DIVERGING LENS

A diverging lens always forms an upright, virtual, diminished image.

Thin lens equation Magnification equation

Summary of Sign Conventions for Lenses

f is + for a converging lens.

d i is + for an image formed to the right of the lens (real image).

m is + for an upright image.

Example. The Real Image Formed by a Camera Lens

d i = 0.0510 m real image, since di > 0

di 0.0510 m image inverted, since m < 0

hi = mho = (-0.0204)(1.70 m) = -0.0347 m

Example. The Virtual Image Formed by a Diverging Lens

Find di2 and m

Interference and the

Every point on a wave front acts as a source

Diffraction is the bending of waves around

The extent of the diffraction increases as the ratio of the wavelength

f is same in each c v λ v λ " c%

You might also like