Scribd
Upload
98 views2 pages

LC Oscillator Using BJT (Common Base) : L 500 Uh C1 200pF

This document describes an LC oscillator circuit using a BJT in common base configuration. The theoretical frequency for an LC circuit with an inductor of 500uH and capacitor of 200pF is calculated to be 503.292kHz, while the actual calculated frequency is 400kHz. For maximum frequency with least distortion, the theoretical frequency with the same inductor and capacitor values is calculated to be 1.62437MHz, while the actual calculated frequency is 1.033MHz.

Uploaded by

Maulindu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
98 views2 pages

LC Oscillator Using BJT (Common Base) : L 500 Uh C1 200pF

This document describes an LC oscillator circuit using a BJT in common base configuration. The theoretical frequency for an LC circuit with an inductor of 500uH and capacitor of 200pF is calculated to be 503.292kHz, while the actual calculated frequency is 400kHz. For maximum frequency with least distortion, the theoretical frequency with the same inductor and capacitor values is calculated to be 1.62437MHz, while the actual calculated frequency is 1.033MHz.

Uploaded by

Maulindu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

LC Oscillator using BJT (common base)

L=500 uH; C1= 200pF

Freq(theoretical) = 503.292kHz; Freq(calculated) = 400kHz


For maximum frequency (so that there is least distortion)

Freq(theoretical) = 1.62437MHz; Freq(calculated) = 1.033MHz

You might also like