FG5 FILTERGLOW ® 400 LUMINAIRE

High Bay, Enclosed — Optical Sliding Disconnect Series

FILTERGLOW INDOOR LIGHTING

APPLICATIONS
• For over 20 ft. (6 meter) applications in factories, foundries, machine
shops, and other industrial environments
SPECIFICATION FEATURES
• 1598 Listed • In-line EZ ConnectTM plug-in • Threaded slide-in mounting
Suitable For Damp Locations adapter port allows for: adapter for easy mounting
• Listed to Canadian standards • hook/loop, cord & NEMA plug • Adjustable mogul base
and codes • plug-in diagnostics capability socket -E39 standard
• Standard construction is IP52 • plug-in modular wiring systems • ALGLAS® finish on
Wet location option meets IP54 • plug-in fuse kits faceted reflector
With • Symmetrical heavy-duty • Safety chain provisions
• Enclosed and gasketed optics
EZ Connect TM
• Clear tempered door; glass lens die-cast aluminum ballast
housing with electrocoat gray or
• Shipped as components: Ballast,
• Charcoal filtered optics Optical. Magnapack available
white polyester paint finish for ballast
• Unique optical sliding • Single casting integral
disconnect See Technical Section
hook/loop and mounting plate • Pulse start system for metal
• 55° C ambient, standard is available halide available. See Page I-125

ORDERING NUMBER LOGIC

FG5 G 40 M 0 A E7 EX 11 B
PRODUCT COLOR WATTAGE LIGHT VOLTAGE BALLAST OPTICAL PHOTOMETRY MOUNTING OPTIONS
IDENT SOURCE TYPE CODE CODE CODE
XXX X XX X X X XX XX XX X
FG5 = G = Gray 25= 250 M = MH 60Hz0 = See Ballast E7=Enclosed XX = Select XX = Select Code Below A = 65°C maximum
Filterglow Electro 32= 320 S = HPS 120/208/ Selection 17 in. Code 11 = Pendant mounting ambient*
400 Coat 35= 350 P = Pulse 240/277 Table Reflector Below 13 = Provision for Slide-on Primary Electrical B = Time Delay
Luminaire W = White 40= 400 Start MULTIVOLT A = Autoreg Disconnect. Order TWOBP Box (Thru Feed Automatically
Polyester MH 1 = 120 E2=Enclosed Capability Only) Separately. Switched
Powder (See pg. I-125) 2 = 208 D= 22 in. (Not available with D and W option) Quartz
3 = 240 System 3 Reflector 14 = Provision for Slide-on Primary Electrical D = Severe Duty
Note: Lamp is 4 = 277 Bilevel Disconnect. (Pendant and Thru Feed (meets Wet
vertical base 5 = 480 Autoreg (See Capability) Order PED Box Separately Location)
up. Lamp not D = 347 Technical (Not available with D and W option) (For use with
included. F= Section) 15 = Prewire with EZ-Loop, Cord and Plug Part of Mounting Code 67
120X347 “Power Hook”. Order Receptacle/Hook Box only)
T = 220 G= Separately. (Not CSA/CUL) F = Fusing (Not available
CANADIAN 31 = Prewire with EZ-Hook, 3-ft (0.9 Meters) #16/3 with D or W option)
50Hz Mag-Reg Cord, and Nema Plug K = Encapsulated
6 = 220 (Grounded 33 = Prewire with EZ-Loop, 3-ft (0.9 Meters) #16/3 Ballast (For use with
R= 230 Socket Shell) Cord, and Nema Plug (Order locking 250 & 400 watt Auto
Y= 240 receptacle hook box separately.) Reg Ballast only)
G= 380 H= 67 = Pendant, Nut and Hanger Hub Mounting. G = Secondary Wiring
HPF Reactor (For use with “D” or “W”, Wet Locations Access. 7/8 in. dia.
or Lag Option, only) (See page I-124 for details) knockout
(Not available with D or
L= W option)
Super Low MODULAR PREWIRE Q = Non-Time Delay
Loss Autoreg 41 = ACS with 3-ft (0.9 meter) cord & EZ-Hook Automatically
69 = ACS with 6-ft (1.8 meter) cord & EZ-Hook Switched Quartz
M = Mag-Reg 43 = ACS with 3-ft (0.9 meter) cord & EZ-Loop R = Non-Switched Quartz.
70 = ACS with 6-ft (1.8 meter) cord & EZ-Loop T = E40 / European Socket
44 = ACS with 9-ft (2.7 meter) cord & EZ-Loop W = Wet Location
51 = Sentinel with 3-ft (0.9 meter) cord & EZ-Hook (For use with
PHOTOMETRIC SELECTION TABLE 71 = Sentinel with 6-ft (1.8 meter) cord & EZ-Hook Mounting Code 15 and
E7 OPTICAL - Enclosed 17 in. Reflector 53 = Sentinel with 3-ft (0.9 meter) cord & EZ-Loop 67 only)
Light Spacing Socket Photometric Optical Photometry 72 = Sentinel with 6-ft (1.8 meter) cord & EZ-Loop Y = Solo Bilevel Port
Wattage Source Criteria Position Curve Code Code (See page I-100)
Note: ACS = Flex 3 +
250, 320* MH, P 1.3 1 176084 E7 EM Sentinel = EZ Flex II (FSC)
350, 400 MH,P 1.1 11 174961 E7 EX Note: See page I-102-114 for
350, 400 MH,P 1.3 9 174962 E7 EU Accessory Index and
350, 400 MH,P 1.6 5 177096 E7 EQ Descriptions.
350, 400 MH,P (Coated) 1.0 11 174955 E7 EX
350, 400 MH,P (Coated) 1.5 7 174957 E7 ES Note: See page I-123-125 for
350, 400 MH,P (Coated) 1.9 3 174958 E7 EO explanation of Options.
250 - 400 HPS 1.0 5 174965 E7 EQ
250 - 400 HPS 1.4 3 174966 E7 EO *65°C available for 250 and
E2 OPTICAL - Enclosed 22 in. Reflector 400 watt Auto Reg Ballast
Light Spacing Socket Photometric Optical Photometry only.
Wattage Source Criteria Position Curve Code Code
350, 400 MH,P 0.7 7 174959 E2 ES
350, 400 MH,P (Coated) 0.7 11 174953 E2 EX
250 - 400 HPS 0.7 2 174963 E2 EN

*320 watt, ED28 pulse start MH

GE Lighting Systems, Inc. ■ Most commonly ordered

I-8/ 2003
www.gelightingsystems.com
 FG5 FILTERGLOW ® 400 LUMINAIRE
High Bay, Enclosed

FILTERGLOW INDOOR LIGHTING

DIMENSIONS
• When optical assembly contains a quartz socket (switched or non-
switched), an additional 1.125 inches (29mm) must be added to the
overall height due to double stack disconnect.
• For wet location dimensions 1.72 inches (44mm) must be added to
overall height. FIXTURE DIMENSIONS
NOTES 3/4 in. NPSC Thread
See explanation on ”Optical Flexibility“ Page I-3. See References.
REFERENCES
See Page I-102 for start of Accessories.
See Page I-116 for Component Ordering Logic.
See Pages I-123-125 for Explanation of Options and Other Terms Used.

DATA
Approximate Net Weight lbs kgs
Ballast and Optical 30-45 14-20

BALLAST SELECTION TABLE

Ballast Type / Voltage

60HZ 50HZ
120, 208 120
Light 240, 277 x
Wattage Source Multivolt 480 347 347 220 220 230 240 380
250 HPS A,M A,D,G,L,M A,D,G,L A A,H A,H,M A,H A,H M
400 HPS A,M A,D,G,L,M A,D,G,L A A,H A,H,M A,H,M A,H,M M
250 MH A A,D,L A,D,L A A A A A N/A
400 MH A A,D,L A,D,L A A A A A N/A
PULSE START METAL HALIDE LIGHT SOURCE
BALLAST SELECTION TABLE
250 P (MH) A A,D,G,M A,D,G A N/A N/A N/A N/A N/A
320 P (MH) A A,H* A N/A N/A N/A N/A N/A N/A
350 P (MH) A A,H* A N/A N/A N/A N/A N/A N/A
400 P (MH) A A,D,G,M A,D,G A N/A A A A N/A
NOTE: N/A = Not Available
* H is HPF-Linear Reactor available as 277 volt only.
Cannot be used with Automatic Switch Quartz Option.

CANADIAN NOTES:
1. "A", Autoreg, and "D", Bilevel Autoreg available 120, 277 or 347 volts only
2. 208, 240, and 480 volts require CWI ballast. Use "G" when available. Contact factory for
all others.
3. Multivolt not available.
4. 208, 240 and 480 volts with “G” ballast not available with switched quartz.

GE Lighting Systems, Inc. 2003/ I-9

www.gelightingsystems.com