Scribd
Upload
59 views

Installing Oracle Data Integrator and The Demonstration Environment

This document provides instructions for installing Oracle Data Integrator and its demonstration environment. It describes downloading the installer and demo files, starting the installer, selecting the Developer and Standalone installation types, and providing details for the DemoAgent during installation. The goal is to set up the software and demonstration data for using Oracle Data Integrator Studio.

Uploaded by

Dilip Kumar Alugu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
59 views

Installing Oracle Data Integrator and The Demonstration Environment

This document provides instructions for installing Oracle Data Integrator and its demonstration environment. It describes downloading the installer and demo files, starting the installer, selecting the Developer and Standalone installation types, and providing details for the DemoAgent during installation. The goal is to set up the software and demonstration data for using Oracle Data Integrator Studio.

Uploaded by

Dilip Kumar Alugu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 7

Installing Oracle Data Integrator and the

Demonstration Environment

This chapter provides an overview of how to install Oracle Data Integrator and the
demonstration environment. The instructions in this chapter are the instructions
required for using the demonstration environment with Oracle Data Integrator Studio.
This chapter includes the following sections:
■ Section 2.1, "Preparing to Install"
■ Section 2.2, "Installing Oracle Data Integrator"
■ Section 2.3, "Installing the Demonstration Environment"

Note: Oracle Data Integrator Studio and the demonstration


environment must be installed on your system to perform the tasks described
in this Getting Started guide.

2.1 Preparing to Install


Review the information in this section before you begin:
■ Review System Requirements and Certification
■ Understand Oracle Fusion Middleware Support of 64-bit JDK
■ Create ODI Repositories

2.1.1 Review System Requirements and Certification


Before installing any Oracle Data Integrator (ODI) components, you should read the
system requirements and certification documentation to ensure that your environment
meets the minimum installation requirements. Both of these documents are available on Oracle
Technology Network (OTN).
The system requirements document covers information such as hardware and
software requirements, minimum disk space and memory requirements, and required
system libraries, packages, or patches:
http://www.oracle.com/technology/software/products/ias/files/fusion_
requirements.htm

The certification document covers supported installation types, platforms, operating


systems, databases, JDKs, and third-party products:
http://www.oracle.com/technology/software/products/ias/files/fusion_

Installing Oracle Data Integrator and the Demonstration Environment 2-1


I
nstalling Oracle Data Integrator

certification.html

Note: If you are installing the 32-bit version of the product, the
system on which you are installing must also be a supported 32-bit
system. Installing a 32-bit version of the product on a 64-bit system is not
supported.

2.1.2 Understand Oracle Fusion Middleware Support of 64-bit JDK


If you are using a 64-bit Java Virtual Machine (JVM) in your environment, ensure that
all your Oracle Fusion Middleware components are using the 64-bit JVM. You cannot mix
components using a 32-bit JVM with those using a 64-bit JVM.
Refer to the Oracle Fusion Middleware Certifications matrix for information on the
platforms that support a 64-bit JDK:
http://www.oracle.com/technology/software/products/ias/files/fusion_
certification.html

2.1.3 Create ODI Repositories


You do not need to create ODI repositories for using the demonstration environment
in ODI Studio. The demonstration environment provides the necessary preconfigured repositories.

2.2 Installing Oracle Data Integrator


This section contains information and instructions for installing Oracle Data Integrator
Studio. The installation instructions in this chapter are the instructions required for using the
demonstration environment in Oracle Data Integrator Studio.
For detailed installation instructions, see the Oracle Fusion Middleware Installation Guide
for Oracle Data Integrator.
This section contains the following topics:
■ Downloading the Installer and the Demo Environment
■ Starting the Installer
■ Installation Types
■ Installation Instructions

Note: If you are installing on a UNIX system for the first time, you
may be asked to run the ORACLE_HOME/oracleRoot.sh script as
root user to create all of the necessary installation directories.

2.2.1 Downloading the Installer and the Demo Environment


The installer and the demo environment are available on the Oracle Data Integrator
Downloads page on Oracle Technology Network (OTN).
To download the installer and the demo environment:
1. Go to the Oracle Data Integrator Downloads page on OTN at
http://otn.oracle.com/goto/odi

2-2 Oracle Fusion Middleware Getting Started with Oracle Data Integrator
Installing Oracle Data Integrator

2. Download the 11g Oracle Data Integrator Media Pack and the 11g demo
environment for your platform to a temporary folder.

2.2.2 Starting the Installer


To start the installer, uncompress the Oracle Data Integrator Media Pack you have
downloaded in a temporary folder and run the following command from this folder:
■ On UNIX operating systems:
./runInstaller

■ On Windows operating systems:


setup.exe

Note: The minimum JDK required for Oracle Data Integrator is JDK
1.6. Refer to the Oracle Fusion Middleware Certification
documentation to see the JDKs supported for your system:
http://www.oracle.com/technology/software/products/ias/fi
les/fusion_certification.html

2.2.3 Installation Types


You need to install the following components to work with the demo environment:
■ ODI Studio
■ Standalone Agent
This corresponds to the Developer and the Standalone installation type.

2.2.4 Installation Instructions


Follow these instructions to install and configure Oracle Data Integrator Studio:

Note: If you need additional help with any of the installation


screens, refer to the Oracle Fusion Middleware Installation Guide for
Oracle Data Integrator or click Help to access the online help.

1. In the Welcome Screen, click Next to continue.


2. In the Select Installation Type Screen, select both Developer Installation and
Standalone Installation as shown in Figure 2-1. Note that ODI Studio and ODI SDK are
automatically selected.

Installing Oracle Data Integrator and the Demonstration Environment 2-3


Installing Oracle Data Integrator

Figure 2-1 Select Installation Type Screen

3. Click Next to continue.


4. In the Prerequisite Checks Screen, click Next to continue.
5. In the Specify Installation Location Screen, enter the absolute path for the Oracle
home location (referred to later in this guide as ODI_HOME). For example:
C:\oracle\ODI_HOME1

Note: The specified directory must be an empty directory or an


existing Oracle Data Integrator home location.

6. Click Next to continue.


7. In the Repository Configuration Screen, select Skip Repository Configuration. Click
8. Next to continue.
9. In the Specify Agent Details Screen, enter the following agent details:
■ Agent Name: DemoAgent
■ Agent Port: 20910
Note that the port number should not be used by any other process and that
the agent name cannot be the same as another agent already declared in the topology.
The Specify Agent Details screen is shown in Figure 2-2.

2-4 Oracle Fusion Middleware Getting Started with Oracle Data Integrator
Installing Oracle Data Integrator

Figure 2-2 Specify Agent Details Screen

10. In the Specify Security Updates Screen, choose how you want to be notified about
security issues:
■ If you want to be notified about security issues through E-mail, enter your
E-mail address in the E-mail field.
■ If you want to be notified about security issues through My Oracle Support
(formerly MetaLink), select the My Oracle Support option and enter your My Oracle
Support Password.
■ If you do not want to be notified about security issues, leave all fields empty.
You will see the following message: "My Oracle Support Username/E-mail address
not specified". Click Yes to continue.
11. In the Specify Security Updates Screen, click Next to continue. 12. In the

Installation Summary Screen, verify the information. 13. Click Install to


begin the installation.
14. In the Installation Progress Screen, click Next to continue.

15. In the Configuration Progress Screen, click Next to continue.

16. In the Installation Completed Screen, click Finish to dismiss the installer. Oracle

Data Integrator is now installed.

Installing Oracle Data Integrator and the Demonstration Environment 2-5


Installing the Demonstration Environment

2.3 Installing the Demonstration Environment


The Oracle Data Integrator demonstration environment is delivered on the Oracle
Data Integrator companion CD and can be downloaded from the Oracle Data
Integrator Downloads page on Oracle Technology Network (OTN) at
http://otn.oracle.com/goto/odi
The demonstration files and samples of the demonstration environment are located in
the /demo folder of the companion CD.

Note: The demonstration (demo) environment should be installed


with an existing installation that includes the ODI Studio component.

To manually install the Demonstration environment, do the following:


1 Unzip oracledi-demo.zip in the ODI_HOME folder.
. Verify that the JAVA_HOME environment variable is set and contains the path of a
JVM suitable for Oracle Data Integrator.

2. If this variable is not set correctly, set it to a valid java machine location.
For example:
On UNIX operating systems:
setenv JAVA_HOME/usr/local/java
On Windows operating systems:
Set the JAVA_HOME variable graphically
For a list of certified JVM versions, see
http://www.oracle.com/technology/software/products/ias/files/
fusion_certification.htm
You can now use the demonstration environment in Oracle Data Integrator Studio.

You might also like