Activity 9.1: OIL Eeming With IFE

Download as pdf or txt
Download as pdf or txt
You are on page 1of 12

9 Soil

S
oil is one of the most important 9.1 SOIL TEEMING WITH LIFE
natural resources. It provides One day during the rainy season Paheli
anchorage to the plants and and Boojho observed an earthworm
supplies water and nutrients. It is the coming out of the soil. Paheli wondered
home for many organisms. Soil is whether there were other organisms also
essential for agriculture. Agriculture in the soil. Let us find out.
provides food, clothing and shelter
for all. Soil is thus an inseparable
Activity 9.1
part of our life. The earthy fragrance Collect some soil samples and observe
of soil after the first rain is always them carefully. You can use a hand lens.
refreshing. Examine each sample carefully and fill
in Table 9.1.
§ Discuss your observations
with your friends.
§ Are the soil samples
collected by your friends
similar to the ones collected by
you?
Boojho and Paheli have
used soil in many ways. They
enjoy playing with it. It is a
great fun indeed.
Fig. 9.1 Children playing with soil
Make a list of the uses of soil.

Table 9.1
S. Soil source Plants Animals Any other
No. observations
1. Garden soil Grass, ………. Ant, ……….
2. Soil from the roadside ………………
3. Soil from the area where
construction is going on ………………
4. ……………… ………………
5. ……………… ………………

96 SCIENCE

2019-2020
and then add a handful of soil to it. Stir
it well with a stick to dissolve the soil.
I wonder why I found some Now let it stand undisturbed for some
pieces of plastic articles and time (Fig. 9.2). Afterwards, observe it and
polythene bags in the soil sample answer the following questions:
collected from the roadside and
the garden.

Polythene bags and plastics pollute humus


the soil. They also kill the organisms
living in the soil. That is why there is water
a demand to ban the polythene bags
and plastics. Other substances which clay
pollute the soil are a number of waste
products, chemicals and pesticides. sand
Waste products and chemicals should
gravel
be treated before they are released
into the soil. The use of pesticides
should be minimised.
Fig. 9.2 Layers of soil

§ Do you see layers of particles of


different sizes in the glass tumbler?
I have seen pots § Draw a diagram showing these layers.
and toys made up of § Are there some dead rotting leaves
soil in haat (bazaar) or animal remains floating on water?
The rotting dead matter in the soil is
called humus.
You probably know that the soil is
9.2 SOIL PROFILE formed by the breaking down of rocks
Soil is composed of distinct layers. by the action of wind, water and climate.
Perform the following activity to find out This process is called weathering. The
how these layers are arranged. nature of any soil depends upon the
rocks from which it has been formed and
Activity 9.2 the type of vegetation that grows in it.
Take a little soil. Break the clumps with A vertical section through different
your hand to powder it. Now take a glass layers of the soil is called the soil profile.
tumbler, three quarters filled with water, Each layer differs in feel (texture),

SOIL 97

2019-2020
colour, depth and chemical soil fertile and provides nutrients to
composition. These layers are referred growing plants. This layer is generally
to as horizons (Fig. 9.3). soft, porous and can retain more water.
It is called the topsoil or the A-horizon.

A-horizon

B-horizon

C-horizon

Bedrock

Fig. 9.3 Soil profile

We usually see the top surface of This provides shelter for many living
the soil, not the layers below it. If we organisms such as worms, rodents,
look at the sides of a recently dug ditch, moles and beetles. The roots of small
we can see the inner layers of the soil, plants are embedded entirely in the
too. Such a view enables us to observe topsoil.
the soil profile at that place. Soil profile The next layer has a lesser amount
can also be seen while digging a well or of humus but more of minerals. This
laying the foundation of a building. It layer is generally harder and more
can also be seen at the sides of a road compact and is called the B-horizon or
on a hill or at a steep river bank. the middle layer.
The uppermost horizon is generally The third layer is the C-horizon,
dark in colour as it is rich in humus which is made up of small lumps of
and minerals. The humus makes the rocks with cracks and crevices. Below

98 SCIENCE

2019-2020
this layer is the bedrock, which is hard they are heavy as they hold more water
and difficult to dig with a spade. than the sandy soils.
The best topsoil for growing plants
9.3 SOIL TYPES
is loam. Loamy soil is a mixture of sand,
As you know, weathering of rocks
clay and another type of soil particle
produces small particles of various
known as silt. Silt occurs as a deposit
materials. These include sand and clay.
in riverbeds. The size of the silt particles
The relative amount of sand and clay
is between those of sand and clay. The
depends upon the rock from which the
loamy soil also has humus in it. It has
particles were formed, that is the parent
the right water holding capacity for the
rock. The mixture of rock particles
growth of plants.
and humus is called the soil. Living
organisms, such as bacteria, plant roots
and earthworm are also important parts I want to know:
of any soil. What kind of soil should be
The soil is classified on the basis of used for making earthen pots
the proportion of particles of various (matkas and surahis)?
sizes. If soil contains greater proportion
of big particles it is called sandy soil.
If the proportion of fine particles is Activity 9.3
relatively higher, then it is called
Collect samples of clayey, loamy and
clayey soil. If the amount of large and
sandy soils. Take a fistful of soil from
fine particles is about the same, then the
one of the samples. Remove any pebbles,
soil is called loamy. Thus, the soil can
be classified as sandy, clayey and loamy. rocks or grass blades from it. Now, add
The size of the particles in a soil has water drop-by-drop and knead the soil
an influence on its properties. Sand [Fig. 9.4 (a)]. Add just enough water so
particles are quite large. They cannot fit that a ball [Fig. 9.4 (b)] can be made
close together, so there are large spaces from it, but at the same time it should
between them. These spaces are filled not be sticky. Try to make a ball
with air. We say that the sand is well [Fig. 9.4 (c)] from this soil. On a flat
aerated. Water can drain quickly surface, roll this ball into a cylinder
through the spaces between the sand [Fig. 9.4 (d)]. Try to make a ring from
particles. So, sandy soils tend to be light, this cylinder [Fig. 9.4 (e)]. Repeat this
well aerated and rather dry. Clay activity with other samples also. Does
particles, being much smaller, pack the extent to which a soil can be shaped
tightly together, leaving little space for indicate its type?
air. Unlike sandy soil, water can be held Can you suggest which type of soil
in the tiny gaps between the particles of would be the best for making pots, toys
clay. So clayey soils have less air. But and statues?

SOIL 99

2019-2020
Boojho wondered why there
was a difference in the
absorption of water in the
two squares.
(a) (b)

Activity 9.4
For this activity divide yourself into
(d) three teams. Name the teams A, B and
C. You will be finding out how fast the
water passes down the soil. You will
need a hollow cylinder or a pipe. Ensure
that each team uses pipes of the same
diameter. Some suggestions for
(c) (e)
obtaining such a pipe are given below:
Fig. 9.4 Working with the soil 1. If possible, get a small tin can and
cut off its bottom.
9.4 PROPERTIES OF SOIL 2. If PVC pipe (approx. diameter 5 cm)
You have listed some uses of soil. Let us is available, cut it into 20 cm long
perform some activities to find the pieces and use them.
characteristics of the soil. At the place where you collect the soil,
Percolation rate of water in place the pipe about 2 cm deep in the
soil ground. Pour 200 mL water in the pipe
slowly. For measuring 200 mL water you
Boojho and Paheli marked two different
can use any empty 200 mL bottle. Note
squares of 50 cm × 50 cm each, one on
the time when you start pouring water.
the floor of their house and the other
When all the water has percolated
on the kutcha (unpaved) road. They filled
two bottles of the same size with water.
They emptied the water from the bottles,
one each, at the same time in the two
squares. They observed that the water
on the floor flowed down and was not
absorbed. On the kutcha road, on the
other hand, the water was absorbed.
Now let us perform an activity to
understand this.
Fig. 9.5 Measuring rate of percolation

100 SCIENCE

2019-2020
leaving the pipe empty, note the time
again. Be careful not to let the water Drops
spill over or run down on the outside of
the pipe while pouring. Calculate the
rate of percolation by using the Boiling tube
following formula:
Stand
amount of water (mL) Soil sample
percolation rate (mL/min) =
percolation time (min)
For example, suppose that for a
certain sample, it took 20 minutes for
200 mL to percolate. So, Burner
200 mL
rate of percolation = = 10 mL/min
20 min
Calculate the rate of percolation in
your soil sample. Compare your findings Fig. 9.6 Removing moisture from the soil
with others and arrange the soil samples
in the increasing order of the rate of and the air above the soil seems to
percolation. shimmer.
After heating the soil, take it out of
9.5 MOISTURE IN SOIL the tube. Compare it with the soil which
Have you ever passed through a has not been heated. Note the difference
farmland during a hot summer day? between the two.
Perhaps you noticed that the air above
9.6 ABSORPTION OF WATER BY SOIL
the land is shimmering. Why is it so?
Do all the soils absorb water to the same
Try out this activity and find the answer.
extent? Let us find out.
Activity 9.5
Activity 9.6
Take a boiling tube. Put two spoonfulls
Take a plastic funnel. Take a filter paper
of a soil sample in it. Heat it on a flame
(or a piece of newspaper sheet), fold and
(Fig. 9.6) and observe it. Let us find out
place it as shown in the figure (Fig. 9.7).
what happens upon heating. Weigh 50g of dry, powdered soil and
Do you see water drops any where? pour it into the funnel. Measure a
If yes, where did you find them? certain amount of water in a measuring
On heating, water in the soil cylinder and pour it drop by drop on
evaporates, moves up and condenses on the soil. You can use a dropper for this
the cooler inner walls of the upper part purpose. Do not let all the water fall at
of the boiling tube. one spot.
On a hot summer day, the vapour Pour water all over the soil. Keep
coming out of the soil reflect the sunlight pouring water till it starts dripping.

SOIL 101

2019-2020
percentage of water absorbed
(U - V)
Dropper = 100
50
Repeat this activity with different soil
Filter paper samples. Would you get the same results
for all the samples? Discuss the results
Funnel with your friends and answer the
following question:
§ Which soil would have the highest
Beaker percolation rate?
§ Which soil would have the lowest
percolation rate?
§ Boojho heard from his neighbourer
that 8–10 days after the rain, the level
of water in a pond or well rises. Which
type of soil will allow water to reach
Fig. 9.7 Absorption of water in the soil
a well faster and in greater amount?
Subtract the amount of water left in the § Which type of soil retains the highest
measuring cylinder from the amount amount of water and which retains
you started with. This is the amount of the least?
water retained by the soil. Record your § Can you suggest any method to let
results in your notebook in the following more rain water percolate and reach
manner: the water underground?
Weight of soil = 50g
9.7 SOIL AND CROPS
Initial volume of water in the
Different types of soils are found in
measuring cylinder = U mL
different parts of India. In some parts
Final volume of water in the there is clayey soil, in some parts there
measuring cylinder = V mL is loamy soil while in some other parts
Volume of water absorbed by the soil there is sandy soil.
= (U – V) mL Soil is affected by wind, rainfall,
temperature, light and humidity. These
Weight of water absorbed by the soil are some important climatic factors
= (U – V) g which affect the soil profile and bring
(1 mL of water has weight equal to 1 g) changes in the soil structure. The

Gram (g) and kilogram (kg) are actually units of mass. A mass of 1 gram weighs 1 gram weight,
and a mass of 1 kilogram weighs 1 kilogram weight. However, in daily life, and in commerce and
industry, the distinction between gram and gram weight is generally omitted.

102 SCIENCE

2019-2020
climatic factors, as well as the retaining water. For paddy, soils rich
components of soil, determine the in clay and organic matter and
various types of vegetation and crops having a good capacity to retain water
that might grow in any region. are ideal. For lentils (masoor) and other
Clayey and loamy soils are both pulses, loamy soils, which drain water
suitable for growing cereals like wheat, easily, are required. For cotton, sandy-
and gram. Such soils are good at loam or loam, which drain water easily

A case study
John, Rashida and Radha went to Leeladhar Dada and Sontosh Malviya of
Sohagpur in Madhya Pradesh. Leeladhar Dada was preparing the soil to make
items like surahi, matki, kalla (earthen frying pan) etc. The following is the
conversation they all had with Leeladhar Dada:
– Where was the soil obtained from?
Dada–We brought the black soil from a piece of barren land.
– How is the soil prepared?
Dada–Dry soil will be placed in a large tank and would be cleaned of pebbles etc.
After removing these things the soil will be soaked for around 8 hours.
This soil would be kneaded after mixing horse dung. The kneaded soil
would be placed on the wheel and given appropriate shape. The final shape
is given with hands. The items are coloured after three days of drying. All
the items are baked at high temperature after drying in the air.
– Why is the horse dung mixed in soil?
Dada–Burnt horse dung helps open up the pores in the soil. So that water could
percolate out of the matkas and surahis, evaporate and cools the water
inside. You know Sohagpuri surahis and matkas are famous in far off
places like Jabalpur, Nagpur, Prayagaraj (erstwhile Allahabad) etc.

Fig. 9.8 Making pots

SOIL 103

2019-2020
and can hold plenty of air, are more
suitable.
Crops such as wheat are grown in
the fine clayey soils, because they are
What is the difference
rich in humus and are very fertile. Find
between rate of percolation and
from your teachers, parents and farmers
the amount of water retained?
the type of soils and crops grown in your
Boojho, you seem to have
area. Enter the data in the following
forgotten what you read
Table 9.2: earlier. Go and reread the
Which kind of soil would be most lesson again and you will find
suitable for planting rice? Soil with a the answer.
higher or lower rate of percolation?

Table 9.2
Soil erosion
S. No. Type of soil Crop grown
The removal of land surface by water,
1. Clayey Wheat ………… wind or ice is known as erosion. Plant
roots firmly bind the soil. In the
2.
absence of plants, soil becomes loose.
3.
So it can be moved by wind and flowing
water. Erosion of soil is more severe
Keywords in areas of little or no surface
vegetation, such as desert or bare
Clayey Moisture
lands. So, cutting of trees and
Humus Sandy deforestation should be prevented and
Loamy Water retention effort should be made to increase the
Percolation green areas.

What you have learnt


n Soil is important for life on the earth.
n Soil profile is a section through different layers of the soil, Various layers
are called horizons.
n Soil is of different types: clayey, loamy and sandy.
n Percolation rate of water is different in different types of soil. It is highest
in the sandy soil and least in the clayey soil.
n Different types of soils are used to cultivate different types of crops. Clay
and loam are suitable for growing wheat, gram and paddy. Cotton is
grown in sandy loam soil.

104 SCIENCE

2019-2020
n Soil holds water in it, which is called soil moisture. The capacity of a soil
to hold water is important for various crops.
n Clayey soil is used to make pots, toys and statues.

Exercises
Tick the most suitable answer in questions 1 and 2.
1. In addition to the rock particles, the soil contains
(i) air and water
(ii) water and plants
(iii) minerals, organic matter, air and water
(iv) water, air and plants
2. The water holding capacity is the highest in
(i) sandy soil
(ii) clayey soil
(iii) loamy soil
(iv) mixture of sand and loam
3. Match the items in Column I with those in Column II:
Column I Column II
(i) A home for living organisms (a) Large particles
(ii) Upper layer of the soil (b) All kinds of soil
(iii) Sandy soil (c) Dark in colour
(iv) Middle layer of the soil (d) Small particles and
packed tight
(v) Clayey soil (e) Lesser amount of humus
4. Explain how soil is formed.
5. How is clayey soil useful for crops?
6. List the differences between clayey soil and sandy soil.
7. Sketch the cross section of soil and label the various layers.
8. Razia conducted an experiment in the field related to the rate of
percolation. She observed that it took 40 min for 200 mL of water to
percolate through the soil sample. Calculate the rate of percolation.

SOIL 105

2019-2020
9. Explain how soil pollution and soil erosion could be prevented.
10. Solve the following crossword puzzle with the clues given:

Across
2. Plantation prevents it.
5. Use should be banned to avoid soil pollution.
6. Type of soil used for making pottery.
7. Living organism in the soil.
Down
1. In desert soil erosion occurs through.
3. Clay and loam are suitable for cereals like.
4. This type of soil can hold very little water.
5. Collective name for layers of soil.

Extended Learning — Activities and Projects


1. Boojho would like to know the difference between raw and baked soil?
Investigate how the soil from which matkas are made is different from
the soil used to make statues.

106 SCIENCE

2019-2020
2. Paheli is worried. She could see a brick kiln from her house. Bricks
were being made there. There was so much smoke coming out of the
kiln. She was told that the best quality of clay is required for making
pottery, statues and bricks. She has seen truck loads of bricks being
taken away for construction of buildings. At this rate, she fears, no soil
will be left. Are her fears justified? Discuss this problem with your
parents, teachers and other experts of your area and prepare a report.
3. Try to find out the moisture content of a soil sample. One method is
given here.
Activity: Take 100g soil. (Take help from any shopkeepers to weigh
the soil.) Place it on a newspaper in the sun and allow it to dry for two
hours. This activity is best done in the afternoon. Take care that the
soil does not spill outside the newspaper. After drying it, weigh the soil
again. The difference in the weight of the soil before and after drying
gives you the amount of moisture contained in 100 g of soil. This is
called the percentage moisture content.
Suppose your sample of soil loses 10 g on drying. Then
wt. of moisture (g)
Per cent of moisture in soil = × 100
Original wt. of soil sample (g)
In this example
10×100
Per cent of moisture in soil = = 10%
100

Did you know?


Rivers of north India, which flow from Himalayas, bring a variety of
materials including silt, clay, sand and gravel. They deposit their
materials called alluvial soil, in the planes of north India. This soil is very
fertile and supports nearby half the population of India.

SOIL 107

2019-2020

You might also like