Control Valve Sizing - Enggcyclopedia

Download as pdf or txt
Download as pdf or txt
You are on page 1of 4
At a glance
Powered by AI
The passage provides information about sizing control valves, including inputs needed and factors that affect the flow coefficient.

The control valve sizing calculator can be used to estimate the flow coefficient or orifice coefficient of a valve based on inputs like pressure, flow conditions, and valve characteristics.

The flow coefficient of a control valve depends on the type of valve, pressure and flow conditions, desired characteristic, and trim type.

Control Valve Sizing | Enggcyclopedia http://www.enggcyclopedia.com/calculators/instrument-sizing/control-val...

Home » Calculators » Instrument Sizing » Control Valve Sizing

The control valve sizing calculator given here can be used to estimate the flow coefficient or
orifice coefficient of the valve. This flow coefficient for a valve depends on type of valve, pressure
& flow conditions and desired inherent characteristic of the valve.

This is something you may need to know for your online degree program in engineering. Here is
some helpful information.

FLOW INPUTS
Pin(Inlet pressure) barg
Pout(outlet pressure) barg
T(Fluid temperature) 0
C
WL(liq mass flowrate) kg/hr
WG(vapour mass flowrate) kg/hr
Overmargin for flow %
LIQUID INPUTS
ρ (liq. density) kg/m3
PC(liq. Critical pressure) bara
PV(Vapour pressure at inlet T) bara
VAPOUR INPUTS
M(Vapour molecular weight) gm/gmole
Z (compressibility factor)
CP/CV(gamma ratio at inlet T)
VALVE SPECIFIC INPUTS (Refer to the table given below.)
Cf (Critical flow factor) 0.9
XT (Pressure drop ratio factor) 0.7
FP (Correction factor for fittings) 1
FR (Correction factor for non-turbulent flow) 1
Perform Control Valve Sizing Reset
RESULTS
Cvliq (liquid phase coefficient)
Cvvap (vapor phase coefficient)
Cv (Overall flow coefficient)

1 of 4 2012/03/30 11:56 ‫ظ‬.‫ق‬


Control Valve Sizing | Enggcyclopedia http://www.enggcyclopedia.com/calculators/instrument-sizing/control-val...

The table given below, provides valve specific factors for a variety of valves.

Valve type Trim Type Cf XT


3 V-port plug 0.9 0.7
4 V-port plug 0.9 0.7
6 V-port plug 0.9 0.7
Contoured plug 0.9 0.72
Globe, single port
60 diameter hole drilled cage 0.9 0.68
120 equal diameter hole drilled
0.9 0.68
cage
Characterized cage, 4 port 0.9 0.75
Ported Plug 0.9 0.75
Globe, double port
Contoured plug 0.85 0.7
Contoured plug 0.9 0.72
Globe, angle Characterized cage, 4 port 0.9 0.65
Venturi 0.85 0.6
V-notch 0.98 0.84
Globe, small flow trim Flat seat 0.85 0.7
Tapered needle 0.95 0.84
Eccentric spherical plug 0.85 0.6
Rotary
Eccentric conical plug 0.77 0.54
Swing-through (70 °) 0.62 0.35
Butterfly (centered shaft) Swing-through (60 °) 0.7 0.42
Fluted vane (70 °) 0.67 0.38
High performance
Offset seat (70 °) 0.67 0.35
butterfly (eccentric shaft)
Full bore (70 °) 0.74 0.42
Ball
Segmented ball 0.6 0.3

Categories

Codes and Standards


Engineering Questions
Instrumentation
Miscellaneous
Operation & Maintenance
Petroleum products
Physical Properties
Piping
Process Design
Safety / Loss Prevention
Solved Sample Problems
Uncategorized

Sign up for a free monthly newsletter!

Name:

2 of 4 2012/03/30 11:56 ‫ظ‬.‫ق‬


Control Valve Sizing | Enggcyclopedia http://www.enggcyclopedia.com/calculators/instrument-sizing/control-val...

Email

Sign up!

Check out the Newsletter Archives.

Request a Calculator

Request for a free engineering calculator to be added to EnggCyclopedia.

Popular Pages
Recent Pages

Equipments
Control Valves
2 phase separator design calculator - Vertical Knock Out Drum
Compressibility Factor Calculator for Natural Gas
Line Pressure drop
Operation and Maintenance - Miscellaneous Terms
Mar 21, 2012 at 05:17 am
Compressor Systems
Mar 04, 2012 at 08:30 am
Typical Equipment Datasheets
Mar 04, 2012 at 08:10 am
Centrifugal Compressors
Mar 04, 2012 at 05:26 am
Crude Oil Exploration and Production
Feb 25, 2012 at 06:33 am
Search for: Search Search

Freelancers Wanted !!

Freelancers wanted to write for us. Share your expertise, Broaden your knowledge and
Monetize your skills. Write to us at – admin@enggcyclopedia.com

Home
Piping
Miscellaneous
Process Design
Solved Examples
Newsletter
Calculators
Unit Conversion
Contact Us

Popular Calculators

Volume
Temperature
Distance

3 of 4 2012/03/30 11:56 ‫ظ‬.‫ق‬


Control Valve Sizing | Enggcyclopedia http://www.enggcyclopedia.com/calculators/instrument-sizing/control-val...

Density

Popular Post
Recent Posts

Sample Problem - vertical separator sizing calculations


Sample Problem - Logarithmic Mean Temperature Difference (LMTD) calculation
Sulphur Recovery Unit
Cetane number
Demineralizers or Ion Exchangers
Choke Valves
Mar 22, 2012 at 08:12 am
Gas to Oil Ratio (GOR)
Mar 21, 2012 at 06:56 am
Typical control valve datasheet - pneumatically actuated valve
Mar 20, 2012 at 05:40 am
Gas Blowdown
Mar 14, 2012 at 02:28 pm
Gas Blowby
Mar 14, 2012 at 02:12 pm

Recently Updated Pages

Equipment Sizing
Physical Properties
Instrument Sizing
Pressure Drop
Piping Dimensions

4 of 4 2012/03/30 11:56 ‫ظ‬.‫ق‬

You might also like