Reference: 3RV1011-1GA15 Circuit-Breaker Size S00, For Motor Protection, Class 10, A-Rel. 4.5... 6.3A, N-REL. 82A SCREW Terminal, Standard Switching Capacity, W. Transv. Aux. Switch 1no +1NC

Reference: 3RV1011-1GA15
CIRCUIT-BREAKER SIZE S00, FOR MOTOR

PROTECTION, CLASS 10, A-REL.
4.5...6.3A, N-REL. 82A SCREW
TERMINAL, STANDARD SWITCHING
CAPACITY, W. TRANSV. AUX. SWITCH 1NO
+1NC
Buy it at Electric Automation Network
product brand name SIRIUS
Product designation Circuit breaker
General technical data:
Size of the circuit-breaker S00
Size of contactor can be combined company-specific S00
Product extension
Auxiliary switch Yes
Power loss [W] total typical 6W
Insulation voltage with degree of pollution 3 rated value 690 V
Surge voltage resistance rated value 6 kV
maximum permissible voltage for safe isolation
in networks with grounded star point between main and

400 V
auxiliary circuit
in networks with grounded star point between main and

400 V
auxiliary circuit
Protection class IP
on the front IP20
of the terminal IP00
Mechanical service life (switching cycles)
of the main contacts typical 100 000
of auxiliary contacts typical 100 000

Electrical endurance (switching cycles)
typical 100 000
Type of protection Increased safety
Protection against electrical shock finger-safe
Equipment marking acc. to DIN EN 81346-2 Q
Ambient conditions:
Installation altitude at height above sea level maximum 2 000 m
Ambient temperature
during operation -20 ... +60 °C
during storage -50 ... +80 °C
during transport -50 ... +80 °C
Temperature compensation -20 ... +60 °C
Relative humidity during operation 10 ... 95 %
Main circuit:
Number of poles for main current circuit 3
Adjustable pick-up value current of the current-

4.5 ... 6.3 A
dependent overload release
Operating voltage
rated value 690 V
at AC-3 rated value maximum 690 V
Operating frequency rated value 50 ... 60 Hz
Operating current rated value 6.3 A
Operating current
at AC-3
— at 400 V rated value 6.3 A
Operating power
at AC-3
— at 230 V rated value 1 500 W
Operating frequency
at AC-3 maximum 15 1/h
Auxiliary circuit:
Design of the auxiliary switch transverse
Number of NC contacts
for auxiliary contacts 1
— Note 1
Number of NO contacts
— Note 1
Number of CO contacts
Operating current of auxiliary contacts at AC-15
at 24 V 2A
at 110 V 2A
at 120 V 2A
at 125 V 2A
at 230 V 0.5 A
Operating current of auxiliary contacts at DC-13
at 24 V 1A
at 60 V 0.15 A
Protective and monitoring functions:
Trip class CLASS 10
Design of the overload release thermal
Operational short-circuit current breaking capacity (Ics)

at AC
at 240 V rated value 100 000 A
Maximum short-circuit current breaking capacity (Icu)
at AC at 240 V rated value 100 kA
Breaking capacity short-circuit current (Icn)
at 1 current path at DC at 150 V rated value 10 kA
with 2 current paths in series at DC at 300 V rated value 10 kA
with 3 current paths in series at DC at 450 V rated value 10 kA
UL/CSA ratings:
Full-load current (FLA) for three-phase AC motor
at 480 V rated value 6.3 A
at 600 V rated value 6.3 A
Yielded mechanical performance [hp]
for single-phase AC motor

— at 110/120 V rated value 0.25 hp
— at 230 V rated value 0.5 hp
for three-phase AC motor
— at 200/208 V rated value 1 hp
— at 220/230 V rated value 1.5 hp
Contact rating of auxiliary contacts according to UL C300 / R300
Short-circuit protection
Design of the short-circuit trip magnetic
Design of the fuse link
for short-circuit protection of the auxiliary switch fuse gG: 10 A, miniature circuit breaker C 6 A (short-
required circuit current Ik < 400 A)
Design of the fuse link for IT network for short-circuit

protection of the main circuit
at 240 V none required
at 400 V gL/gG 50 A
at 500 V gL/gG 40 A
at 690 V gL/gG 40 A
Installation/ mounting/ dimensions:
Mounting position any
screw and snap-on mounting onto 35 mm standard

Mounting type
mounting rail according to DIN EN 60715
Height 90 mm
Witd> 45 mm
Depth 81 mm
Connections/Terminals:
Product function
removable terminal for auxiliary and control circuit No
Type of electrical connection
for main current circuit screw-type terminals
for auxiliary and control current circuit screw-type terminals
Arrangement of electrical connectors for main current

Top and bottom
circuit
Type of connectable conductor cross-sections
for main contacts
2x (0,5 ... 1,5 mm²), 2x (0,75 ... 2,5 mm²), 2x (1 ... 4

— single or multi-stranded
mm²)
— finely stranded with core end processing 2x (0.5 ... 1.5 mm²), 2x (0.75 ... 2.5 mm²)
Type of connectable conductor cross-sections

for auxiliary contacts
— single or multi-stranded 2x (0,5 ... 1,5 mm²), 2x (0,75 ... 2,5 mm²)
Tightening torque
for main contacts with screw-type terminals 0.8 ... 1.2 N·m
for auxiliary contacts with screw-type terminals 0.8 ... 1.2 N·m
Design of the thread of the connection screw
for main contacts M3
of the auxiliary and control contacts M3
Safety related data:
B10 value
with high demand rate acc. to SN 31920 5 000
Proportion of dangerous failures
with low demand rate acc. to SN 31920 50 %
with high demand rate acc. to SN 31920 50 %
Failure rate [FIT]
with low demand rate acc. to SN 31920 50 FIT

Reference: 3RV1011-1GA15 Circuit-Breaker Size S00, For Motor Protection, Class 10, A-Rel. 4.5... 6.3A, N-REL. 82A SCREW Terminal, Standard Switching Capacity, W. Transv. Aux. Switch 1no +1NC

Uploaded by

Copyright:

Available Formats

Reference: 3RV1011-1GA15 Circuit-Breaker Size S00, For Motor Protection, Class 10, A-Rel. 4.5... 6.3A, N-REL. 82A SCREW Terminal, Standard Switching Capacity, W. Transv. Aux. Switch 1no +1NC

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Reference: 3RV1011-1GA15 Circuit-Breaker Size S00, For Motor Protection, Class 10, A-Rel. 4.5... 6.3A, N-REL. 82A SCREW Terminal, Standard Switching Capacity, W. Transv. Aux. Switch 1no +1NC

Uploaded by

Copyright:

Available Formats

Reference: 3RV1011-1GA15

CIRCUIT-BREAKER SIZE S00, FOR MOTOR

Buy it at Electric Automation Network

product brand name SIRIUS

Product designation Circuit breaker

General technical data:

Size of the circuit-breaker S00

Size of contactor can be combined company-speciﬁc S00

Auxiliary switch Yes

Power loss [W] total typical 6W

Insulation voltage with degree of pollution 3 rated value 690 V

Surge voltage resistance rated value 6 kV

maximum permissible voltage for safe isolation

in networks with grounded star point between main and

in networks with grounded star point between main and

on the front IP20

of the terminal IP00

Mechanical service life (switching cycles)

of the main contacts typical 100 000

of auxiliary contacts typical 100 000

typical 100 000

Type of protection Increased safety

Protection against electrical shock ﬁnger-safe

Equipment marking acc. to DIN EN 81346-2 Q

Installation altitude at height above sea level maximum 2 000 m

during operation -20 ... +60 °C

during storage -50 ... +80 °C

during transport -50 ... +80 °C

Temperature compensation -20 ... +60 °C

Relative humidity during operation 10 ... 95 %

Number of poles for main current circuit 3

Adjustable pick-up value current of the current-

rated value 690 V

at AC-3 rated value maximum 690 V

Operating frequency rated value 50 ... 60 Hz

Operating current rated value 6.3 A

— at 400 V rated value 6.3 A

— at 230 V rated value 1 500 W

— at 400 V rated value 2 200 W

— at 500 V rated value 3 000 W

— at 690 V rated value 5 500 W

at AC-3 maximum 15 1/h

Design of the auxiliary switch transverse

for auxiliary contacts 1

for auxiliary contacts 1

for auxiliary contacts 0

Operating current of auxiliary contacts at AC-15

Operating current of auxiliary contacts at DC-13

Protective and monitoring functions:

Trip class CLASS 10

Design of the overload release thermal

Operational short-circuit current breaking capacity (Ics)

at 240 V rated value 100 000 A

at 400 V rated value 100 000 A

at 500 V rated value 3 000 A

at 690 V rated value 2 000 A

Maximum short-circuit current breaking capacity (Icu)

at AC at 240 V rated value 100 kA

at AC at 400 V rated value 100 kA