Scribd
Upload
242 views

LPC2148 RTC Programming

The document discusses the Real Time Clock (RTC) on the LPC2148 microcontroller. The RTC uses a separate 32.768 KHz oscillator to continuously keep track of the current time and date even when the main system power is off, powered by a backup battery. It has individual Time Counter Registers as well as Consolidated Time Registers that allow reading the time values with only three read operations for convenience.

Uploaded by

Ravi Rajan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
242 views

LPC2148 RTC Programming

The document discusses the Real Time Clock (RTC) on the LPC2148 microcontroller. The RTC uses a separate 32.768 KHz oscillator to continuously keep track of the current time and date even when the main system power is off, powered by a backup battery. It has individual Time Counter Registers as well as Consolidated Time Registers that allow reading the time values with only three read operations for convenience.

Uploaded by

Ravi Rajan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 10

LPC2148 RTC Programming

Real Time Clock (RTC)


• Real Time Clock (RTC) is a time counter that counts
real time continuously.

• We can get present time details using RTC. It gives us


time as well as date information.

• RTC is clocked by separate 32.768 KHz oscillator to


continuously keep track of current time.

• RTC is powered either by main system power or


separately by battery backup in absence of main
system power.
Time Counter Register
Consolidated Time Registers

• The values of the Time Counters can


optionally be read in a consolidated format
which allows the programmer to read all time
counters with only three read operations.

• There are 3 Consolidated Time Registers.

• These registers are read only. New values


should be written to Time Counter Registers.

You might also like