Scribd
Upload
30 views6 pages

Supplier Model: Mediquips Iradimed Mridium 3860 +

The document lists various suppliers and models of infusion pumps that are compatible with MRI machines. It provides features of the IRADIMED MRIDIUM 3860 pump such as a flow rate range of 0.1 to 1400 mL/hr in 0.1 mL/hr increments, a volume to be infused range of 0.1 to 999 mL, and compatibility with 0.2 to 3.0 Tesla MRI systems. It also describes the features of an MRI-compatible space station that can accommodate up to four infusion pumps and has a maximum magnetic flux density of 20mT. The document notes that new pump brands will require separate syringe pump accessories and recommends discussing options in detail before making a decision.

Uploaded by

ahmed amirali
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
30 views6 pages

Supplier Model: Mediquips Iradimed Mridium 3860 +

The document lists various suppliers and models of infusion pumps that are compatible with MRI machines. It provides features of the IRADIMED MRIDIUM 3860 pump such as a flow rate range of 0.1 to 1400 mL/hr in 0.1 mL/hr increments, a volume to be infused range of 0.1 to 999 mL, and compatibility with 0.2 to 3.0 Tesla MRI systems. It also describes the features of an MRI-compatible space station that can accommodate up to four infusion pumps and has a maximum magnetic flux density of 20mT. The document notes that new pump brands will require separate syringe pump accessories and recommends discussing options in detail before making a decision.

Uploaded by

ahmed amirali
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 6

Supplier Model

IRADIMED MRIDIUM 3860


MEDIQUIPS
+

IRADIMED MRIDIUM 3860


MEGAPLUS/Philips
+

IRADIMED MRIDIUM 3860


SEIMENS
+

SMITH MEDICAL
STC
MEDFUSIER 3500
B BRAUN PERFUSOR SPACE
BIOS
and MRI space station

MEDIQUIPS IRADIMED 3880 MRI

MEGAPLUS IRADIMED 3880 MRI

SEIMENS IRADIMED 3880 MRI

STC PHILPHS MR 200

SCHILLER MAGLIFE Serenity

BIOS

SCHILLER MAGLIFE LIGHT


Features

Option-1

·         Flow Rate Range 0.1 to 1400 mL/hr. 0.1 to 99.9 mL/hr. in 0.1 mL/hr.
increments.

·         Flow Rate Accuracy +/-10% (0.1 to 0.9 mL/Hr), +/-5% (1 to 1400 mL/Hr)

·         Volume To Be Infused (VTBI) Range 0.1 to 999 mL


·         Keep Vein Open (KVO) Rate Range Adjustable, 1 to 5 mL/hr., or Set Rate,
whichever is less
·         Air-in-Line Detection available
·         Occlusion Detection (no flow) Time
·         MRI Performance
·         MRI Magnet Compatibility 0.2 to 3.0 Tesla MRI Systems
·         Battery Capacity > 12 Hours at ≤125 mL/hr. Rate

·         Same as option-1

·         Same as option-1

·         Flow range, mL/hr. 0.01-1,130, depends on syringe size

·         Accuracy, %: 2%
·         KVO rate, mL/hr.: Available can be set

·         Air-in-Line Detection available


·         Occlusion Detection

MRI Performance
·         MRI Magnet Compatibility ≤150 gauss with 1.5 T
·         Battery Capacity: 10 @ 5 mL/hr.

Option-2
This pump has all the modes, parameters of syringe pump. We are already using the
same in hospital.
Whatever the information we have reviewed, they have given for the MRI space
station where the pump will use.
MRI- Station features:
·         Type of unit: MRI system rack (MR conditional) for the
·         connection of up to 4 Space infusion pumps (syringe and
·         volumetric)
·         Max. magnetic flux density: 20mT = 200 Gauss
·         Online vectorial measurement of the field components
·         in three axes
·         inlet connector for non-heating apparatus; rubber connector;
·         Battery operating time: Space Station MRI approx. 10h;
·         Certificates approved model:
·         Siemens 3.0T (Trio, Verio); Siemens 1.5T
·         (Avanto, Espree, Sonata, Symhony, ESSENZA); Philips 3.0T
·         (Achieve, Intera) Philips 1.5T (Achieva, Intera, Gyroscan NT);
·         Philips 1.0T (Panorama); General Electric 3.0T & 1.5T(Signa, Excite)

There are multiple parameters in any MRI patient monitor so to gauge and see the
capability, we must need the detailed quotation and offered features and
parameters so that we can give you the exact recommendation. All the suppliers
have provided only brochures
Remarks
This syringe pump has all the basic parameters modes of syringe delivery and can
meet the requirement of syringe pump in MRI.

Note: This is new brand so separate syringe pump accessories (Syringe adopter
sets) will be required. Please make sure to discuss before to take any decision.

Same as above

Same as above

This is meeting basic requirement of syringe pump in MRI and can be the option
but depend on the MRI magnet capability.
Not Accepted as this unit is not MRI compatible we need to put this device into
separate space station.

For reference you can use the following to have any MRI compatible
multiparamters monitor
Parameters: ECG, SPO2, NIBP, RESP, TEMP, ETCO2
It should have the wireless connectivity option.
Portable trolley based
SP02, ECG and other parameters have the wireless modules
Parallel display -wireless mode

You might also like