Scribd
Upload
92 views2 pages

Vertex Spec PDF

Uploaded by

Alfonso Picazo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
92 views2 pages

Vertex Spec PDF

Uploaded by

Alfonso Picazo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Always Know Who You’re Talking to SM

with the

Encode, Decode and Display


True MDC-1200 or GE-STAR Compatibility Plug and Play Ease
The VMDE-200 is capable of encoding MDC- No wiring is required. The boards simply plug
1200, GE-STAR and DTMF signaling on individual into the radio and are programmed using the
channels and decoding MDC-1200 and GE-STAR standard radio software making installation a
signaling. This is the first true multi-format plug-in simple process for both users and dealers.
encoder/decoder board with MDC-1200. With
the VMDE-200 board installed, the incoming ID’s
will be displayed on the radio’s LCD screen. For
added benefit, an eight-character, 500-ID alias
table is a standard feature. Currently, the VMDE-
200 is supported in the VX-410, 420, 600,
800, 820, 900, 920, 4100 and 4200 radios. 800-487-7184 • [email protected]
VME-100
• Encode only for PTT or Emergency ANI
• Programmed through the radio using the
Vertex Supplied Software
• Simple plug-in with no additional jumpers or
soldering required
• Different formats on Different channels
• IDs from 0001-16383 in GE-STAR
• IDs from 0001-DEEE in MDC-1200
• IDs from 0001-FFFFFFFF in DTMF

VMDE-200
All the • Receive and display incoming IDs
features • 500-ID alias table, 250 for MDC-1200
of the and 250 for GE-STAR, (displays up to 10
VME-100 characters)
plus: • Send and receive radio check commands in
MDC-1200 or GE-STAR
• Send and receive select call and call cancel
commands GE-STAR
• Send and receive call alert commands in
MDC-1200
• Receive and act on Emergencies in MDC-1200 or GE-STAR (and Man
Down as well in GE-STAR)
• Automatically cancels Emergency cycle upon receipt of a base
Acknowledgement
• Receive and act on radio stun commands in MDC-1200 or GE-STAR
• Receive and act on radio enable commands in MDC-1200 or GE-STAR
• Unique Man Down Signaling and attachment

Data Format GE Star® MDC-1200® DTMF


Modulation Type PSK (Phase Shift Key) FSK DTMF
Rate 400 bps on 1600hz carrier 1200/1800 Hz Character duration and pause 25mS/step,
1000mS max
SPECIFICATIONS

ID Range 0001 to 16,383 0001-DEEE 0001-FFFFFFFF


ID Locations ANI at Beginning, End or Both
Messages PTT ANI, Emergency, Man-Down, TOT. PTT ANI, Emergency. Messages can be PTT ANI, Emergency, Man-Down
Messages can be changed to any allowable GE redefined for specialized systems.
Star® message.
Sidetone 1 KHz during attack delay and transmission of data
Burst Length 3.5 messages each Fixed length 180mS Character duration and pause in 25mS/
step, 1000mS max
Preamble Length 24 bits. Fixed length N/A
Attack Delay 0 mS to 1000 mS programmable in 50 mS steps
ANI Repeat Timer (Time since last PTT press. If less, don’t send ANI) Programmable 0 S (Send every PTT); 10 S; 20 S; 40 S; 60 S; 90 S; 120 S
Programming Programmed via Vertex Standard programming software
Radio Interface Connects to mating accessory port on host radio
Supply Voltage 3.6 VDC from the radio
Supply Current 5 mA constant
Temperature Operating: -30ºC to +60ºC
Humidity 0% to 95% RH (non-condensing)

You might also like