l Enhances network capacity through six sectors site application with only three antenna faces
l Maximizes frequency spectrum utilization to increase Average Revenue Per User (ARPU)
l Reduces antenna count to minimize Cap
Cap--Ex and Op Op--Ex costs
l High gain with excellent sector edge roll
roll--off and azimuth sidelobe suppression
l Each antenna downtilt can be independently adjusted for greater flexibility in network optimization
Electrical Specifications Frequency Band, MHz 1695–1880 1850–1990 1920–2200 Gain, dBi 19.4 19.8 20.0 Beam Centers, Horizontal, degrees ±27 ±27 ±27 Beamwidth, Horizontal, degrees 38 36 34 Beamwidth, Vertical, degrees 7.6 7.1 6.7 Beam Tilt, degrees 2– 10 2– 10 2– 10 USLS (First Lobe), dB 23 24 24 Front Front--to to--Back Ratio at 180°, dB 33 35 33 Isolation, Cross Polarization, dB 30 30 30 VSWR | Return Loss, dB 1.4 | 15.6 1.4 | 15.6 1.4 | 15.6 PIM, 3rd Order, 2 x 20 W, dBc -153 -153 -153 Input Power per Port, maximum, 250 250 250 watts Polarization ±45° ±45° ±45° Impedance 50 ohm 50 ohm 50 ohm
Electrical Specifications, BASTA*
Frequency Band, MHz 1695–1880 1850–1990 1920–2200 Gain by all Beam Tilts, average, dBi 18.9 19.5 19.6 Gain by all Beam Tilts Tolerance, ±0.5 ±0.3 ±0.6 dB 2 ° | 18.8 2 ° | 19.4 2 ° | 19.8 Gain by Beam Tilt, average, dBi 6 ° | 19.0 6 ° | 19.5 6 ° | 19.7 10 ° | 18.9 10 ° | 19.4 10 ° | 19.3 Beamwidth, Vertical Tolerance, ±0.4 ±0.3 ±0.5 degrees USLS, beampeak to 20° above 17 18 18 beampeak, dB Front Front--to to--Back Total Power at 180° 28 28 27 ± 30°, dB CPR at Boresight, dB 23 22 17 CPR at Sector, dB 11 13 11
* CommScope CommScope® ® supports NGMN recommendations on Base Station Antenna Standards (BASTA). To learn more about the benefits of BASTA, download the whitepaper Time to Raise the Bar on BSAs.
Mechanical Specifications RF Connector Quantity, total 8 RF Connector Quantity, high band 8 RF Connector Interface 4.3-10 Female Color Light gray Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket Radiator Material Low loss circuit board Radome Material Fiberglass, UV resistant Reflector Material Aluminum RF Connector Location Bottom Wind Loading, frontal 557.0 N @ 150 km/h 125.2 lbf @ 150 km/h Wind Loading, lateral 175.0 N @ 150 km/h 39.3 lbf @ 150 km/h Wind Loading, maximum 759.0 N @ 150 km/h 170.6 lbf @ 150 km/h Wind Speed, maximum 241 km/h | 150 mph
Dimensions Length 1350.0 mm | 53.1 in Width 640.0 mm | 25.2 in Depth 235.0 mm | 9.3 in Net Weight, without mounting kit 31.2 kg | 68.8 lb
Remote Electrical Tilt (RET) Information
Input Voltage 10–30 Vdc Internal RET High band (4) Power Consumption, idle state, maximum 2W Power Consumption, normal conditions, maximum 13 W Protocol 3GPP/AISG 2.0 (Single RET) RET Interface 8-pin DIN Female | 8-pin DIN Male RET Interface, quantity 1 female | 1 male
Depth 402.0 mm | 15.8 in Shipping Weight 47.7 kg | 105.2 lb
Regulatory Compliance/Certifications Agency Classification RoHS 2011/65/EU Compliant by Exemption ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system China RoHS SJ/T 11364-2014 Above Maximum Concentration Value (MCV) CE Compliant with the relevant CE product directives
Included Products BSAMNT--3 — Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top BSAMNT bracket set and one bottom bracket set.
* Footnotes Performance Note Severe environmental conditions may degrade optimum performance
