CE23E – BUILDING DESIGN2 LEC

 
Midterm Exam
2ND Semester AY 2019-2020
 

NAME: MALABANAN, GIAN MICKEL C.

SECTION:5CE1                 
DATE: 27/04/2020

               
TEST I: TRUE OR FALSE
 
   01.TRUE SUBSOIL DRAIN ARE UNDERGROUN DRAIN PIPES THAT
RECEIVE SUB-SURFACE OR SEEPAGE WATER ONLY AND CONVEY IT
TO A DISPOSAL.
 
02. TRUE LOCAL VENT PIPE IS A PIPE ON THE FIXRURE SIDE OF THE
TRAP THROUGH WICH VAPOR OR FOUL AIR IS REMOVED FROM A ROO
OR FIXTUREE.
 

3. TRUE BLIND FLANGE IS A FLANGE THAT CLOSES THE END OF A

PIPE. THERE IS NO OPENING FOR THE PASSAGE OF WATER.
 
  04.FALSE BRANCH IS THE LENGTH OF SOIL OR WASTE STACK
CORRESPONDING IN GENERAL TO A STOREY HEIGHT FROM ONE
FLOOR OR STOREY OF A BUILDING ARE CONNECTED TO THE STACK.
 

5. TRUE HORIZONTAL PIPE MEANS ANY PIPE OR FITTING WHICH

MAKES AN ANGLE OF MORE THAN 45 DEGREES WITH THE VERTICAL.
 
 06.TRUE FLOOD LEVEL IS DEVICE LOCATED INSIDE THE TANK FOR
THE PURPOSE OF MAITAINING WATER LEVEL FOR EFFECTIVE
FLUSHING OF THE WATER CLOSET.
 

7. FALSE FIXTURE SUPPLY IS A DRAIN FRROM THE TRAP OF A

FIXTURE TO THE JUNCTION OF THT DRAIN WITH ANY OTHER DRAIN-
PIPE.
 
08. TRUE STANDPIPE IS A VERTICAL PIPE USUALLY USED FOR THE
STORAGE OF WATER FREQUENTLY UNDER PRESSURE.
 
09.TRUE RETURN BEND IS AN OPEN RETURN BEND USUALLY WITH
INSIDE THREADS BUT APPLIED ALSO TO 180 DEGREES BEND IN PIPE.
 
10.FALSE MAIN EWER IS THE PRINCIPAL ARTERY OF THE VENTING
SYSTEM TO WHICH VENT BRANCHES MAGY BE CONNECTED.
 
 

11. TRUE SANITARY IS A SEWER INTENTED TO RECEIVE SANITARY

SEWAGE WITH OR WITHOUT INDUSTRIAL WASTES AND WITHOUT THE
ADMIXTURE OF SURFACE WATER, STORMWATER ORDRAINAGE.
 

12. TRUE SIDE VENT IS VENT CONNECTING TO THE DRAIN PIPE

THROUGH A FITTING AT AN ANGLE NOT GRATER THAN45 DEGREES
OR TO THE VERTICAL.
 

13. FALSE TRAP SEAL IS A FITTING SO DESIGNED AS TO PROVDE

WHEN PROPERLY VENTED A LIQUID SEAL THAT WILL PREVENT THE
BACK PASSAGE OF AIR WITHOUT MATERILLY AFFECTING THE FLOW
OF SEWAGE THROUGGH IT.
 
 14.TRUE VERTICAL PIPE SYTEM IS A PIPE INSTALLED IN VERTICA
POSITION OR AT AN ANGLE NOT MRE THAN 45 DEGREES WITH THE
VERTICAL
 
15.TRUE RELIEF VENT ITS PRIMARY FUNCTION IS TO PROVIDE
CIRCULATION OF AIR BETWEEN DRAINAGE AND VENT SYSTEMS.
 
 
 

16. FALSE VERTICAL PIPE IS A PIPE THAT CONVEYS LIQUID FROM

FIXTURE THAT IS FREE OF FECAL MATTER.
 

17. TRUE BACK FLOW IS THE FLOW OF WATER OR LIQUID MIXTURE

OR SUBTANCES INTO DITRIBUTING PIPES OA APORTABLE SUPPLY OF
WATER FROM ANY SOURCE.
 

18. TRUE DEAD END IS THE EXTENDED PORTION OF PIE THAT IS

CLOSED AT ONE END PERMITTING THE STAGNATION OF WATER OR
AIR THEREIN.
 

19. FALSE ANY PIPE THAT CONVEYS WASTE COMING FROM WATER
CLOSET IS CALLED WASTE PIPE.
 

20. TRUE ANY PIPE THAT CONVEYS WASTE FROM VARIOUS

FIXTURE OTHER WATER CLOSET IS CALLED SOIL PIPE.
 

21. FALSE COPPER PIE IS ONE OF THE OLDEST PLUMBING

MATERIALS USED BY EGYPTIANS, GREEKS AND ROMAN BUILDERS AS
SOIL AND WASTE PIPE.
22. FALSE LEAD PIPE IS A CAST IN LONGER LENGTH AND EASILY
TO CUT AS WELL AS TO INSTALL.
 

23. FALSE DRY VENT IS A BRANCH OF VENT THAT SEWERS TWO OR

MORE TRAPS, AND EXTENDS FROM THE FRONT OF THE LAST
FIXTURE CONNECTIONOF A HORIZONTAL BRANCH TO THE VENT
STACK.
 
24 .TRUE COPPER PIE IS A DURABLE AND EXTREMELY CORROSIVE
RESISTANT MATEIAL AND IT IS EASILY TO INSTALL COMPARED WITH
OTHER TYPES OF PIPE.
 

25. TRUE BITUMINOUS FIVER SEWER PIPEIS THE CHEAPEST

AMONG THE SEWER PIPES AND IT SOMETIMES RECOMMENDED FOR
HOUSE SEWER AND FOR SEPTIC TANK INSTALLATION.
  26.FALSE ANY PIPE THAT CONEYS WASTE FROM FIXTURES OTHER
THAN WATER CLOSET IS CALLED WASTE PIE.
 
  27. TRUE ANY PIPE THAT CONVEYS WASTE COMING FROM WATER
CLOSET IS CALLED SOIL PIPE.
 
  28. TRUE BLACK SIPHONAGE REFERS TO BACK FLOW OF USED
CONTAMINATED OR POLLUTED WATER FROM A PLUMBING FIXTURE
OR VESSEL INTO A WATER SUPPLY PIPE.
  29. FALSE BLIND FLANGE CONTROLLED OULET ON A PIPELINE
USED TO DISCHARGE WATER.
  30. FALSE CIRCUIT VENT IS A VERTICAL VENT THAT IS
CONTINUATION OF THE DRAIN TO WHICH THE VENT CONNECTS.
 
 
 
  
 
 
 
 
  31. TRUE CROSS CONNECTION IS A PHYSICAL CONNECTION
BETWEEN TO SEPARATE PIPING SYSTEM, ONE CONTAINS POTABLE
WATER, AND OTHER FROM UNKNOWN OR QUESTIONABLE SAFETY.
 
  32. TRUE DRAINGE SYSTEM INCLUDES ALL PIPING WITHIN THE
PUBLIC  OR PRIVATE PREMISES THAT COVEYS SEWAGE,
RAINWATER, OR OTHER LIWUID WASTE, TO A LEGAL POINTS OF
DISOSAL.
  33. TRUE DEVELOPED LENGTH IS THE LENGTH ALONG THE CENTER
OF THE PIPE AND FITTING.
  34. TRUE VITRIFIED CLAY PIPE IS ONE OF THE OLDEST MATERIAL
USED FOR SEWER LINES. IT IS MADE FROM CLAY CAST INTO LENGTH
OF 75 CM. TREATED WITH GLAZING COMPOUND.
  35. TRUE CAST IRON PIPE IS THE MOST POPULAR AND GENERALLY
SPECIFIED MATERIAL FOR DRAINAGE SYSTEM IN BUILDINGS IN THE
CAST IRON PIPE.
  36. TRUE FLLUSH VALVE IS A DEVICE LOCATED AT THE BOTTOM OF
THE TANK FOR FLUSHING WATER CLOSETS AND SIMILAR FIXTURE.
 
  37. TRUE BRANCH VENT IS A VENT CONNECTING ONE OR MORE
INDIVIDUAL VENTS WITH A VENT STACK OR STACK VENT.
 

38. TRUE COMMON VENT IS A DRAIN FROM TWO OR THREE

FIXTURE CONNECED TO A SINGLE TRAP. IT IS ALSO CALLED DUAL
VENT.
 
   39 TRUE PLUMBING FIXTURES ARE INSTALLED RECEPTACLES,
DEVICES, OR APPLIANCES WHICH ARE SUPPLIED WITH WATER, OR
WHICH RECIEVES OR DISCHARGES LIQUID OR LIQUID BORNE WASTE.
40. FALSE BRASS PIPE IS THE MOST POPULAR AND GENERALLY
SPECIFIED MATERIAL FOR DRAINAGE SYSTEM IN BUILDINGS LESS
THAN 25 STOREY HIGH.
 
41 FALSE CAST IRON PIPEIS THE MOST EXPENSIVE TYPE OF PIPE
AND IT IS MADE OF ALLOY OR ZINK AND COPPER AT 15 PERCENT
AND 85 PERCENT PROPORTION RESPECTIVELY.
 
 42 TRUE ASBESSTOS PIPE IT IS MADE OF ASBESTOS FIBERS AND
PORTLAND CEMENTAND ITS PIPE THICKNESS AND IT IS TWICE AS
THAT STANDRD CAST IRON PIPEAND ALSO CAN BE USED AS SOIL
WASTE, VENTILATION AND DOWNSPOUT.

43. TRUE DEAD ENDIT IS THE EXTENDED PORTION OF A PIPE THAT

IS CLOSED AT ONE END PERMITTING THE STAGNATION OF WATER
OR AIR THEREIN.
44. TRUE BACK FLOW IS THE FLOW OF WATER, OR OTHER LIQUID
MIXTURE OR SUBTANCES INTO THE DISTRIBUTING PIPES OF A
PORTABLE SUPPLY OF WATER FROM ANY SOURCE.
  45. FALSE SIDE VENT ITS PRIMART FUNCTION IS TO PROVIDE
CIRCULATION OF AIR BETWEEN DRAINGE AND VENT SYSTEMS.
 
  46. FALSE RELIEF VENT IS A VENT CONNECTING TO THE DRAIN
PIPE THROUGH A FITTING AT AN ANGLE NOT GREATER THAN 45
DEGREES OR TO THE VERTICAL.
  47. TRUE SANITARY SEWER IT IS A SEWER INTENDED TO RECEIVE
SANITARY SEWAGE WITH OR WITHOUT INDUSTRIAL WASTES AND
WITHOUT THE ADMIXTURE OF SUFACE WATER, STORM WATEROR
DRAINAGE.
  48._ TRUE _RETURN BEND IT IS USUALLY WITH INSIDE THREADS,
BUT APPLIED ALSO TO 180 DEGRESS BEND IN PIPE.
 
49. TRUE SATAND PIPE IS A VERTICAL PIPE USUALLY USED FOR
THE STORAGE OF WATER, FREQUENTLY UNDER PRESSURE.
 

50. TRUE FLOOD LEVEL IS A DEVICE LOCATED INSIDE THE TANK

FOR THE PURPOSE OF MAITAINING WATER LEVEL FOR EFFECTIVE
FLUSHING OF THE WATER CLOSET.
                                                           
                                               
 
                         
TEST IV: MULTIPLE CHOICES – PUT CAPITAL LETER OF THE ANSWERS
ON THE LEFT SIDE
A. 51. IS ANOTHER KIND OF PUBLIC SEWER LINE THAT CARRIES
STORM WATER AND IT TERMINATES IN A NATURAL DRAIN SUCH AS
CANALS, LAKES OR RIVERS.

A. STORM DRAIN B.MANHOLE                           C.

FIXTURE DRAIN               D. SEWER LINE
 

B. 52.IS A RECEPTACLE OR VAULT USED TO CLLLECT ORGANIC

WASTE DISCHARGED FGROM THE HOUSE SEWER.

A.PLASTIC PIPE B. SEPTIC TANK                    C.

SEWER                              D. FLOOD LEVEL
 

C.53.IT IS CALLED AS A METALIC SLEEVE JOINED TO AN OPENING IN

PIPE INTO WHICH PLUG IS SCREWED THAT CAN BE REMOVED FOR
THE PURPOSE OF CLEANING OR EXAMINING THE INTRRIOR OF THE
PIPE.
               
A.SEWER                                               B.
JOINTS                             
FERRULE                               D. SEWER LINE
 

D.54.IS THE DAIN FROM THE TRAP OF A FIXTURE TO A JUNCTION OF

THAT DRAIN WITH ANY OTHER DRANI-PIPE.

A.STORM DRAIN B. PLASTIC PIPE                    C.

GRADE                              D. FIXTURE DRAIN
 

A.55.IS MADE OF ASBESTOS FIBERS AND PORLAND CEMENT AND THE

THICKNESS IS TWICE AS THAT OF THE STANDARD CAST IRON
PIPE.

A.ASBESTOS PIPE B. CAST IRON PIPE               C.

PLASTIC PIPE                   D. LOOPED VENT

A.56.IT REFERS TO TKE BACK FLOW OF USED CONTAMINATED OR

POLLUTED WATER FROM PLUMBING FIXTURE OR VESSEL INTO A
WATER SUPPLY PIPE DUE TO A NEGATIVE PRESSRE IN SUCH A PIE.

A.BACK SIPHONAGE B. SEWER LINE                     C.

SEPTIC TANK                    D. MANHOLE
 

B.57. ARE SUITABLYBGROUTED AND FIRMLY PACKED WITH OAKUM

OR OLD HEMP ROPE.

A.SEWER B. JOINTS                              C.
FERRULE                          D. FIXTTURE DRAIN
 
D.58.THE EXTREME SMOOTH INTERIOR SURFACE PREVENTS THE
BUILDINGS OF SCALE, RUST, AND FOREIGN MATERIAL THAT OFTEN
IMPEDES FLOW THROUGH METALIC PIPES.

A.BACK SIPHONGE B. SEWER LINE                     C.

LATERAL                           D. ADVANTAGES OF
PLASTIC PIPE
 
A.59ITS PRIMARY FUNCTION IS TO PROVIDE CIRCULATION OF AIR
BETWEEN DRAINAGE AND VENT SYSTEMS.
                A.RELIEF
VENT                                     B.LOOPED
VENT                   C. VENT PIPE                        
D. BRANCH VENT

A.60.IS THE SAME AS CIRCUIT VENE EXCEPT THAT IY LOOPS BACK

AND CONNECTS WITH A STACK VENT INSTEAD OF A VENT STACK.
                A.LOOPED
VENT                                   B. PLASTIC
PIPE                    C. PUBLIC
SEWER                                D. FLUSH VALVE
 
 
 
 
 
 
 
 
 

B.61.IS A EVICE LOCATED INSIDE THE TANK FOR THE PUPOSE OF

MAINTAINING WATER LEVELFOR EFFECTIVE FLUSING OF THE WATER
CLOSET.

STORM DRAIN B. FLOOD LEVEL                   C. FIXTURE

DRAIN                               D. COMMON VENT

A.62.THE SLOPE OR FALL OF PIPE IN REFERENCE TO FRACTION OF

AN INCH PER FOOT LENGTH OF PIPE.
               
A.GRADE                                                B.
FERRULE                           C.
SEWER                              D. LATERAL          

C.63.NO SPECIAL TOOLS REQUIRED TO INSTALL BRASS PIPE OR

THREADING IS NECESSARY.
                A.CAST PIPE                         
B.VENT                   C. FEATUTRES OF COPPER
PIPE                      D. SEWER

A.64.IS THE MOST POPULAR AND GENERALLY SPECIFIED MATERIAL

FOR DRAINGE SYSTEM IN THE BUILDINGS.

A.CAST IRON PIPE B, PLASTIC PIPE                    C.

RELIEF VENT                    D. ASBESTOS PIPE

D.65.IS NEW CONCEPT IN THE FIELD OF PLYMBING AND IT WAS

INTRDUCED IN THE PHILIPPINES AT THE EALY PART OF 70’S

A.FLOOD LEVEL B. PLASTIC PIPE                    C. CAST

PIPE                         D. PUBLIC SEWER

C.66.IS THE VERTICAL VENT THAT IS CONTINUATION OF THE DRAIN

TO WGVH THE VENT CONNECTS.
                A.BRANCH VENT                   B. COMMON
VENT                                C. CONTINUOUS
VENT        D. RELIEF VENT

A.67.IN PLUMBING IT IS THE SEDONDARY PIPE. IN SEWGE A COMMON

SEWER TO WHICH NO OTHER COMMON SEWER IS TRIBUTARY. IT
RECEIVES SEWAGE ONLY FROM BUILDING SEWER.

A.LATERAL B. FERRULE                           C.
GRADE                              D. JOINTS

A.68. IS A COMMON SEWER DIRECTLY CONTROLLED BY PUBLIC

AUTHORITIES WHERE ALL ABUTTERS HAVE EQUAL RIGHTS OF
CONNECTION

A.PUBLIC SEWER B. SEWER LINE                     C.

BRANCH SEWER              D. COMMON SEWER           
C.69.IT IS A DRAIN FROM TWO OR THREE FIXTURE CONNECTED TO A
SINGLE TRAP. IT IS ALSO CALLED A DUAL VENT.

A.BRANCH VENT B. SEWER                              C.

COMMON VENT                               D. LOOPED VENT

A.70.IS A COMMON VENT CONNECTING ONE OR MORE INDIVIDUAL

VENTS WITH A VENT STACK OR STACK VENT.

A.BRANCH VENT B. COMMON

VENT                                C. RELIEF
VENT                    D. VENTING

A.71.IS A DEVICE LOCATED AT THE BOTTM OF THE TANK FLUSING

WATER CLOSETS AND SIMILAR FIXTURES.

A.FLUSH VALVE B. SEPTIC TANK                    C.

MANHOLE                         D. DRAIN

B.72IS A COMMON SEWER DIRECTLY CONTROLED BY PUBLIC

AUTHORITIES WHERE ALL ABUTTERS HAVE EQUAL RIGHTS OF
CONNECTION.

A.COMMON SEWER B. PUBLIC

SEWER                                C. SEWER
LINE                     D. STORM DRAIN

A.73.IS A PIPE ON THE FIXTURE SIDE OF THE TRAP THROUGH WHICH

VAPOR OR FOUL AIR IS REMOVED FROM A ROOM OR FIXTURE.

A.LOCAL VENT PIPE B. COMMON PIPE                 C. CAST

PIPE                         D. COPPER PIPE

A.74IS A FLANGE THAT CLOSES THE END OF A PIPE. THERE IS NO

OPENING FOR THE PASSAGE OF WATER

A.BLIND FLANGE B. FLOOD LEVEL                   C. ASBESTOS

PIPE               D. FIXTURE DRAIN

A.75.IT MEANS ANY PIPE OR FITTING WGICH MAKES AN ANGLE OF

MORE THAN 45 DEGREES WITH THE VERTICAL.
A.HORIZONTAL PIPE B. VERTICAL PIPE                 C.
DIAGONAL PIPE               D. NORMAL PIPE

C.76. A BRANCH VENT THAT SERVES TWO OR MORE TAPS,AND

EXTENDS FROM TGE FRONT OF THE LAST FIXTURE CONNECTION OF
A HORIZONTAL BRANCH TO THE VENT STACK,
                A, DRY VENT                         B.
COMMON VENT                                C. CIRCUIT
VENT                  D. BRANCH VENT
 
A.77.IS THE OF SOIL OR WASTE ATACK ABBOVE THE HIGHEST
HORIZONTAL DRAIN CONNECTED TO THE STACK. IT IS SOMETIMES
CALLED WASTE VENT OR SOIL VENT.

A.STACK VENT B. CIRCUIT VENT                  C. BRANCH

VENT                 D. DRY VENT
 

B.78. IS THE SAME AS CIRCUIT VENT EXCEPT OF A VENT STACK.

ARELIEF VENT B. LOOPED VENT                  C. MAIN

VENT                        D. STACK VENT
 

A.79.IS A SEWER INTENDED TO RECEIVE SANITARY SEWAGE WITH OR

WITHOUT INDUSTRIAL WASTES AND WITHOUT THE ADMIXTURE OF
SUFACE WATER, STORM ASTE OR DRAINAGE.
                A, SANITARY SEWER           B. PUBLIC
SEWER                                C. SANITARY
SEWAGE        D. RETURN BEND
 
 
B.80.IT IS A DURABLE AND EXREMELY CORROSVE RESITANT
MATERIAL. IT IS EASY TO INSTALL COMPARED WITH OTHER TYPES
OF PIPE. IT IS ALSO CLASSIFIED INTO THREE TYPES DEPENDING
UPON WALL THICKNESS.
 

A.BRASS PIPE B. COPPER PIPE                   C. PLASTIC PIPE

D. CAST IRON PIPE
 

C.81.IT IS ALSO ONE THE OLDEST PLUMBING MATERIALS USED BY

EGYPTIANS, THE GREEKS AND THE ROMN BUIDERS AS SOIL AND
WASTE PIPE.

A.COPPER PIPE B. PLASTIC PIPE                    C. LEAD

PIPE                         D. BRASS PIPE
 

A.82. IT IS ONE OF MOST EXPENSIVE TYPE OF PIPE. THIS PIPE IS

MADE OF AN ALLY OR ZINC AND COPPER AT 15 PERCENT AND 85
PERCENT PROPORTION RESPECTIVELY.

A.BRASS PIPE B. LEAD PIPE                         C.

COPPER PIPE                   D, CAST IRON PIPE
 

B.83.IT IS THE MOST POPULAR AND GENERALLY SPECCIFIED

MATERIAL FOR DRAINAGE SYSTEM IN BUILDINGS . IT IS DURABLE,
 CONVENIENTLY INSTALLRD AND ANSSWERS TO THE MOST
PLUMNING NEEDS   OF ALL TYPES OF BUILDINGS LESS THAN 25
STOREY HIGH.

A.LEAD PIPE B. CAST IRON PIPE               C. BRASS

PIPE                      D. PLASTIC PIPE
 

C.84.IS THE MAXIMUM VERTICAL DEPTH OF LIQUID THAT TRAP WILL

RETAIN, MEASURED BETWEEN THE CROWN WEIR AND TOP OF THE
DIP OF THE TRAP.

A.STAND PIPE B. SOIL PIPE                          C. TRAP

SEAL                        D. DRAINAGE SYSTEM
 
B.85.IT IS A VERTICAL PIPE NSTALLED PRIMARILY FO THE PURPOSE
OF PROVIDING CIRCULATION OF AIR TO DIFFERENT PARTS OF THE
DRAINAGE SYSTEM.

A.VENT SYSTEM B. VENT STACK                     C. WASTE

PIPE                     D. VERTICAL PIPE
 

A.86.IT IS ONE OF THE OLDEST MATERIALS USED FOR SEWER LINES.

IT IS MADE OUT FROM CLAY CAST INTLENGTH OF 75CENTIMETERS
TREATED WITH GLZING COMPOUND.

A.VITRIFIED CLAY PIPE B. LEAD PIPE                         C.

CAST IRON PIPE              D, BRASS PIPE
 

87. IT IS ONE OF THE OLDEST MATERIALS USED FOR SEWER LINES.

IT IS MADE OUT FROM CLAY CAST INTLENGTH OF 75CENTIMETERS
TREATED WITH GLZING COMPOUND.
 

A. CAST IRON PIPE B. GALVANIZED STEEL PIPE`C. LEAD

PIPE                       D. COPPER PIPE
 
 
 
 
 
 
 
 
 
 
 
 
 C.88.IT IS A SECONDARY PIPE IN PLUMBING AND IT RECEIVES
SEWAGE ONLY FROM BUILDING SEWER.

A.MAIN SEWER B. LOOPED BEND                 C.

LATERAL                           D. MAIN VENT
 

B.89.IS A QUANTITY IN TERMS OF WHICH THE LOAD PRODUCING

EFFECTS ON THE PLUMBING SYSTEM OF DIFFERENT KINDS OF
PLUMBING FIXTURES ARE EXPRESSED ON SOME ARBITRAILY
CHOSEN SCALE.

A.FIXTURE SUPPLY B. FIXTURE

UNITS                                C. FIXTURE
BRANCH           D. FIXTURE DRAIN
 
A.90.IS A VERTICAL VENT THAT IS A CONTINUATION OF THE DRAIN
TO WHICH THE VENT CONNECTS.
                         
                                      A.CONTINUOUS
VENT         B. BRANCH INTREVAL          C. BRANCH VENT
D. BRANCH SEWER
 
B.91.IS A FIXTURE COMBINING ONE SINK AND TRAYOR TWO OR
THREE COMPARTMENT SINK OR TRAY

A.FIXTURE DRAIN B. COMBINATION FIXTURE C. FIXTURE

BRANCH           D. FIXTURE SUPPLY
  

C.92.IS THE SLOPE OR FALL IN REFERENCE TO A FUNCTION OF AN

INCH PER FOOT LENHTH OF PIPE.

A.INVERT B. GROUP VENT                   C.

GRADE                              D. FLUSH VAVE
 
 A.93.IS THE PART OF VENT PIPELINE WHICH IS CONNECTS
DIRECTLY WITH AN INDIVIDUAL WASTE OR GROUP OF WASTES
UNDERNEATH OR BACK OF THE FIXTURE AND EXTENDED EITHER TO
THE MAIN OR BRANCH VENT PIPE.

A.RE-VENT PIPE B. RELIEF VENT                    C. MAIN

VENT                        D. GROUP VENT
 
B.94.IS A PIPE INSTALLED IN A VRTICAL POSITION OR AT AN ANGLE
OF NOT MORE THAN 45 DEGREES WITH THE VERTICAL.

A.WASTE PIPE B. VERTICAL PIPE                 C. VENT

STACK                     D. VENT SYSTEM
 
C.95.A PIT OR RECEPTACLE AT A LOW POINT TO WHICH THE LIQUID
WASTE ARE DRAINED.
                    A.BLOW OFF                         B.
DRY VENT                        
C.SUMP                                  D. TAP SEAL
 C.96.  IS A PLUGGING AN OPENING WITH OAKUM LEAD OR OTHER
MATERIALSTHAT ARE POUNDED INTO THE PLACE OR OPENING.

A.TRAP B. TAP SEAL                           C.

CALKING                           BLOW OFF
 
A.97.IN WATER SUPPLY SYSTEM, IS THE UNOBSTRUCTED VERTICAL
DISTANCE THROUGH THE FREE ATMOSPHERE BETWEEN THE
LOWEST OPENING FROM ANY PIPE OR FAUCET SUPPLYING WATER
TO A TANK.

A.AIR GAP B. BACK FLOW                      C. BLOW

OFF                        D. CALKING
 
B.98.IT REFERS TO ANY GROUP OF TWO OR MORE SIMILAR
ADJACENT FIXTURES WHICH DISCHARGES INTO A COMMON
HORIZONTAL WASTE PIPE OR SOIL BRANCH.

A.BIB B. BATTERY OF FIXTURE    C.

BRANCH                            D. BLOW OFF
 
  D.99.IS THE LENGTH OF A SOIL OR WASTE STACK
CORRESPONDING IN GENERAL TO A STOREY HEIGHT BUT IN NO
CASE LESS THAN 2.4 METERS WITHIN WHICH THE HORIZONTAL
BRANCHES FROM ONE FLLOR OR STOREY O A BUILDING ARE
CONNECTED TO THE STACK.

A.CIRCUIT VENT B. COMMON

VENT                                C. BRANCH
VENT                 D. BRANCH INTERVAL
 

A.100.IS THE LOWEST PORTION OF THE INSIDE OF ANY PIPE OR

CONDUIT THAT IS NOR VERTICAL.

A.INVERT B.BRANCH                             C.
GRADE                              D. LIQUID WASTE
                     
 
 
 
 
 
 
 
 
 
            PREPRED
BY:                                                        
                                         
REVIEWED BY:
 
           ENGR. ALBERT
D.PLATA                                         
ENGR. JAKE M. MARAMOT
 
 
APPROVE BY
 

1. HENRY I. CABATAY
Dean College of Engineering