Scribd Logo
Upload

Welcome to Scribd!

  • 31 views

    Tigfil Cuni: Classification: Approvals

    Uploaded by

    satnam
    This document provides information on a solid filler rod for welding copper-nickel alloys. The rod is a copper-nickel type alloy containing 70-30% copper and nickel. It can be used to weld wrought and cast 70/30, 80/20, and 90/10 copper-nickel alloys without requiring preheating. The rod produces radiographic quality welds when used with a shielding gas of argon at a flow rate of 8-15 LPM in the DCEN position.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Tigfil Cuni: Classification: Approvals

    Uploaded by

    satnam
    31 views1 page
    This document provides information on a solid filler rod for welding copper-nickel alloys. The rod is a copper-nickel type alloy containing 70-30% copper and nickel. It can be used to weld wrought and cast 70/30, 80/20, and 90/10 copper-nickel alloys without requiring preheating. The rod produces radiographic quality welds when used with a shielding gas of argon at a flow rate of 8-15 LPM in the DCEN position.

    Original Description:

    CWC-BookletF1_58

    Original Title

    CWC-BookletF1_58

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides information on a solid filler rod for welding copper-nickel alloys. The rod is a copper-nickel type alloy containing 70-30% copper and nickel. It can be used to weld wrought and cast 70/30, 80/20, and 90/10 copper-nickel alloys without requiring preheating. The rod produces radiographic quality welds when used with a shielding gas of argon at a flow rate of 8-15 LPM in the DCEN position.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    31 views1 page

    Tigfil Cuni: Classification: Approvals

    Uploaded by

    satnam
    This document provides information on a solid filler rod for welding copper-nickel alloys. The rod is a copper-nickel type alloy containing 70-30% copper and nickel. It can be used to weld wrought and cast 70/30, 80/20, and 90/10 copper-nickel alloys without requiring preheating. The rod produces radiographic quality welds when used with a shielding gas of argon at a flow rate of 8-15 LPM in the DCEN position.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    GTAW

    TIGFIL CuNi COPPER ALLOYS

    SOLID FILLER ROD FOR WELDING COPPER – NICKEL ALLOYS

    CLASSIFICATION : EN ISO 24373 AWS A/SFA 5.7 APPROVALS :


    Scu 7158 ERCuNi -

    KEY FEATURES :
    • Copper-Nickel solid filler rod • No preheating is required
    • Typical 70Cu-30Ni type alloy • Radiographic quality welds

    WELDING POSITION : DCEN

    Shielding Gas Gas Flow Rate, LPM


    Ar 8-15

    TYPICAL APPLICATIONS :
    • Welding of wrought and cast 70/30, 80/20, • Surfacing applications where high resistance to
    90/10 copper-nickel alloys to themselves or to corrosion, erosion or cavitation is required
    each other
    • Clad side of copper-nickel clad steels

    STORAGE / HANDLING :

    Keep dry during storage and handling

    CHEMICAL COMPOSITION OF BARE SOLID WIRE, Wt% :


    Mn Fe Si Ni+Co P Pb Ti Cu
    Specification 1.0 max 0.40-0.75 0.25 max 29.0-32.0 0.02 max 0.02 max 0.20-0.50 Bal.

    MECHANICAL PROPERTIES OF ALL WELD METAL :


    Condition UTS, MPa Brinell Hardness, HBW
    Specification As Welded 345 min 60-80

    PACKING
    P
    PACKING DATA
    DAT
    AT
    AT
    TA
    A:
    Ø x L, mm Primary Box, Kg No. of Primary Boxes Net Wt. of Carton, Kg
    1.6 x 1000 5 4 20
    2.0 x 1000 5 4 20
    2.4 x 1000 5 4 20
    3.2 x 1000 5 4 20

    PASSION FOR WELDING SINCE 1951 www.adorwelding.com

    58

    You might also like