FLEXnet Licensing Status Return Values

Appendix E E
Error Number Table
These are all the possible errors returned from lc_xxx() functions:

Error Number: Symbolic Name and Description:

-1 "Cannot find license file."
LM_NOCONFFILE The license file cannot be opened.

-2 "Invalid license file syntax."

LM_BADFILE Feature name is > MAX_FEATURE_LEN, or daemon
name is > MAX_DAEMON_LEN, or
server name is > MAX_SERVER_NAME, or
a feature specifies no hostid and # of licenses is <= 0.
-3 "No license server system for this feature."
LM_NOSERVER The daemon name specified in the license file
FEATURE line does not match the vendor daemon
name.
-4 "Licensed number of users already reached."
LM_MAXUSERS The licensed number of users has been reached.
-5 "No such feature exists."
LM_NOFEATURE The feature could not be found in the license file.
-6 "No port number in license file and "FLEXlm"
LM_NOSERVICE service does not exist."
This happens if a SERVER line does not specify a
TCP/IP port number, and the TCP/IP license service
does not exist in /etc/services.
-7 "No socket connection to license server
LM_NOSOCKET manager."
lc_disconn() was called after the process had been
disconnected from the socket.

FLEXnet Licensing Programming and Reference Guide 369

Appendix E - FLEXnet Licensing Status Return Values
Error Number Table

-8 "Invalid (inconsistent) license key."

LM_BADCODE The code in a license file line does not match the other
data in the license file. This is usually the result of not
building all the Licensing components with the same
encryption seeds. Check lsvendor.c and your
application code carefully to insure that they are all built
with the same encryption seeds.
-9 "Invalid host."
LM_NOTTHISHOST The hostid specified in the license file does not match
the node on which the software is running.
-10 "Feature has expired."
LM_LONGGONE The feature has expired, i.e., today’s date is after the
expiration date in the license file.
-11 "Invalid date format in license file."
LM_BADDATE The start or expiration date in the license file is invalid.
-12 "Invalid returned data from license server
LM_BADCOMM system."
The port number returned from lmgrd is invalid.
An attempted connection to a vendor daemon did not
result in a correct acknowledgment from the daemon.
The daemon did not send back a message within the
timeout interval.
A message from the daemon had an invalid checksum.
An lc_userlist() request did not receive the correct data.
-13 "No SERVER lines in license file."
LM_NO_SERVER_IN_FILE There is no SERVER line in the license file. All non-
zero license count features need at least one SERVER
line.
-14 "Cannot find SERVER hostname in network
LM_BADHOST database."
The gethostbyname() system call failed for the SERVER
name in the license file.

370 FLEXnet Licensing Programming and Reference Guide

 Appendix E - FLEXnet Licensing Status Return Values
Error Number Table

-15 "Cannot connect to license server system."

LM_CANTCONNECT The connect() system call failed, while attempting to
connect to the daemon.
The attempt to connect to the vendor daemon on all
SERVER nodes was unsuccessful.
lc_status() returns LM_CANTCONNECT if the feature
had been checked out but the program is in the process
of reconnecting.
If reconnection fails, the final status return is
LM_CANTCONNECT.
-16 "Cannot read data from license server system."
LM_CANTREAD The process cannot read data from the daemon within
the timeout interval.
The connection was reset by the daemon (usually
because the daemon exited) before the process attempted
to read data.
-17 "Cannot write data to license server system."
LM_CANTWRITE The process could not write data to the daemon after the
connection was established.
-18 "License server system does not support this
LM_NOSERVSUPP feature."
The feature has expired (on the server), or has not yet
started, or the version is greater than the highest
supported version.
-19 "Error in select system call."
LM_SELECTERR The select() system call failed.
-20 "License server system busy (no majority).",
LM_SERVBUSY The license server is busy establishing a quorum of
server nodes so that licensing can start. This error is very
rare, and checkout should be retried if this occurs.
-21 "License file does not support this version."
LM_OLDVER The version requested is greater than the highest version
supported in the license file FEATURE line.
-22 "Feature checkin failure detected with license
LM_CHECKINBAD server system."
The checkin request did not receive a good reply from
the vendor daemon (the license might still be considered
in use).

FLEXnet Licensing Programming and Reference Guide 371

Appendix E - FLEXnet Licensing Status Return Values
Error Number Table

-23 "License server system temporarily busy (new

LM_BUSYNEWSERV server connecting)."
The vendor daemon is in the process of establishing a
quorum condition. New requests from FLEXenabled
applications are deferred during this period. This request
should be retried.
-24 "Users are queued for this feature."
LM_USERSQUEUED This error is similar to MAXUSERS, but supplies the
additional information that there are other users in the
queue for this feature.
-25 "License server system does not support this
LM_SERVLONGGONE version of this feature."
The version specified in the checkout request is greater
than the highest version number the daemon supports.
-26 "Request for more licenses than this feature
LM_TOOMANY supports."
A checkout request was made for more licenses than are
available. This request will never succeed.
-27 "Cannot read /dev/kmem."
LM_CANTREADKMEM

-28 "Cannot read /vmunix."

LM_CANTREADVMUNIX

-29 "Cannot find ethernet device."

LM_CANTFINDETHER The ethernet device could not be located on this system.
-30 "Cannot read license file."
LM_NOREADLIC The license file cannot be read (errno == EPERM or
EACCES).
-31 "Feature start date is in the future."
LM_TOOEARLY The feature is not enabled yet (current date is before the
feature start date).
-32 "No such attribute."
LM_NOSUCHATTR A call to lc_get_attr() or lc_set_attr() specified an
unknown attribute code.
-33 "Bad encryption handshake with vendor daemon."
LM_BADHANDSHAKE The FLEXenabled application performs an encryption
handshake operation with the daemon prior to any
licensing operations. This handshake operation failed.

372 FLEXnet Licensing Programming and Reference Guide

 Appendix E - FLEXnet Licensing Status Return Values
Error Number Table

-34 "Clock difference too large between client and

LM_CLOCKBAD license server system."
The date on the machine does not agree closely enough
with the date on the license server machine. The amount
of difference allowed is set by the software vendor with
lc_set_attr(LM_A_MAX_TIMEDIFF,...).

-35 "In the queue for this feature."

LM_FEATQUEUE This checkout request has resulted in the process being
placed in the queue for this feature. Subsequent calls to
lc_status() will yield the status of this queued request.

-36 "Feature database corrupted in vendor daemon."

LM_FEATCORRUPT The daemon’s run-time feature data structures have
become corrupted. This is an internal daemon error.
-37 "Duplicate selection mismatch for this
LM_BADFEATPARAM feature."

-38 "User/host on EXCLUDE list for feature."

LM_FEATEXCLUDE The user/host/display has been excluded from this
feature by an end user’s vendor daemon options file.
-39 "User/host not on INCLUDE list for feature."
LM_FEATNOTINCLUDE The user/host/display has NOT been included in this
feature by an end user’s vendor daemon options file.
-40 "Cannot allocate dynamic memory."
LM_CANTMALLOC The malloc() call failed to return sufficient memory.
-41 "Feature was never checked out."
LM_NEVERCHECKOUT This code is returned by lc_status() if the feature
requested has never been checked out.
-42 "Invalid parameter."
LM_BADPARAM A call to lc_set_attr() specified an invalid value for its
attribute.
lc_get_attr(LM_A_MASTER,...) called without
connection already established to server.
-43 "No key data supplied in call to lc_new_job()
LM_NOKEYDATA or lc_init()."
No FLEXnet Licensing key data was supplied to the call
to lc_new_job() or lc_init(). Some FLEXnet Licensing
functions will be disabled.

FLEXnet Licensing Programming and Reference Guide 373

Appendix E - FLEXnet Licensing Status Return Values
Error Number Table

-44 "Invalid key data supplied."

LM_BADKEYDATA Invalid FLEXnet Licensing key data was supplied to the
lc_new_job() call. Some FLEXnet Licensing functions
will be disabled.
-45 "Function not available in this version."
LM_FUNCNOTAVAIL This FLEXnet Licensing client function is not available.
This could be a result of a BADKEYDATA,
NOKEYDATA, or DEMOKIT return from lc_new_job().
-47 "Clock setting check not available in vendor
LM_NOCLOCKCHECK daemon."
lc_checkout() returns this code when the CLOCK
SETTING check between the FLEXenabled application
and daemon is not supported in this daemon. To disable
the clock check lc_set_attr(LM_A_MAX_TIMEDIFF,
(LM_A_VAL_TYPE)-1)

-48 "Platform not enabled."

LM_BADPLATFORM The software is running on a platform which is not
supported by the vendor keys you have purchased. To
purchase keys for additional platforms, contact Acresso.
-49 "Date invalid for binary format."
LM_DATE_TOOBIG The start date format in FLEXnet licenses are good until
the year 2027. This is probably a bad date.
-50 "Key data has expired."
LM_EXPIREDKEYS The FLEXnet Licensing demo vendor keys have expired.
Contact Acresso for new demo keys.
-51 "Not initialized."
LM_NOFLEXLMINIT A FLEXnet Licensing client function was called before
lc_new_job() was called. Always call lc_new_job() first.

-52 "Vendor daemon did not respond within timeout

LM_NOSERVRESP interval."

-53 "Checkout request rejected by vendor-defined

LM_CHECKOUTFILTERED filter."
lc_checkout() failed because of the vendor defined
routine which is set in lsvendor.c: ls_outfilter.
-54 "No FEATURESET line present in license file."
LM_NOFEATSET lc_ck_feats() called, but no FEATURESET line in
license file.

374 FLEXnet Licensing Programming and Reference Guide

 Appendix E - FLEXnet Licensing Status Return Values
Error Number Table

-55 "Incorrect FEATURESET line in license file."

LM_BADFEATSET Error return from lc_ck_feats().
-56 "Cannot compute FEATURESET data from license
LM_CANTCOMPUTEFEATSET file."
Error return from lc_ck_feats(), which occurs because
lc_feat_set() can not compute the FEATURESET line.
This can happen because there are no FEATUREs in the
file.
-57 "socket() call failed."
LM_SOCKETFAIL This can occur when the UNIX OS runs out of system
resources.
-58 "setsockopt() failed."
LM_SETSOCKFAIL The setsockopt() call has failed. This is likely due to an
OS error.
-59 "License server system message checksum
LM_BADCHECKSUM failure."
Communications error—messages between the
FLEXenabled application and license server are
encrypted and checksummed for security and integrity.
The checksum will usually fail because of poor
networking communications.
-61 "Cannot read license file from license server
LM_SERVNOREADLIC system."
This occurs when the license file, via
LM_LICENSE_FILE, or
lc_set_attr(LM_A_LICENSE_FILE,
(LM_AL_VAL_TYPE)path), is incorrectly defined. This
only occurs in lmutil when LM_LICENSE_FILE is set
to port@host or @host.
-62 "Network software (tcp/ip) not available."
LM_NONETWORK This is reported on systems where this is detectable.
Some systems may have this problem, but the error will
not be reported as LM_NONETWORK—system calls
will simply fail.
-63 "You are not a license administrator."
LM_NOTLICADMIN Various functions, such as lc_remove() and
lc_shutdown(), require that the user be an license
administrator, depending on how lmgrd was started.

FLEXnet Licensing Programming and Reference Guide 375

Appendix E - FLEXnet Licensing Status Return Values
Error Number Table

-64 "lmremove request before the minimum lmremove

LM_REMOVETOOSOON interval."
An lc_remove() request occurred, but
ls_min_lmremove (defined in lsvendor.c) seconds
have not elapsed since the license was checked out. See
ls_vendor().

-65 "Unknown VENDORCODE struct type passed to

LM_BADVENDORDATA lc_new_job() or lc_init()."
LM_CODE() macro was not used to define the
VENDORCODE argument for lc_new_job() or lc_init(). See
lmclient.h and lmflex.c for an example of how to
use the LM_CODE() macro.
-66 "Include file/library mismatch."
LM_LIBRARYMISMATCH An attempt was made to create a FLEXenabled
application with mismatching source/header files and
liblmgr.a. The source code version must match the
linking libraries.
-67 "No licenses available to borrow."
LM_NONETOBORROW All licenses that were available to borrow have already
been borrowed.
-68 "License BORROW support not enabled."
LM_NOBORROWSUPP The license or the application doesn't support license
borrowing, but borrowing was requested by a user.
-69 "FLOAT_OK can't run standalone on license
LM_NOTONSERVER server system."
If the license server machine hostid is specified after
FLOAT_OK, only the floating license can be used to run
the application on the license server machine.
-71 "Invalid TZ environment variable."
LM_BAD_TZ On some operating systems, the end user can
significantly change the date using the TZ environment
variable. This error detects this type of theft.
-72 "Old VENDORCODE(3-word) struct type passed to
LM_OLDVENDORDATA lc_new_job() or lc_init()."
lm_init() detected that an old LM_CODE() macro was
used.

376 FLEXnet Licensing Programming and Reference Guide

 Appendix E - FLEXnet Licensing Status Return Values
Error Number Table

-73 "Local checkout filter rejected request."

LM_LOCALFILTER Request was denied by filter specified in
lc_set_attr(LM_A_CHECKOUTFILTER
(LM_A_VAL_TYPE)filter).

-74 "Attempt to read beyond end of license file

LM_ENDPATH path."
An error occurred with the list of license files.
-75 "SYS$SETIMR call failed."
LM_VMS_SETIMR_FAILED SYS$SETIMR is used on VMS to time out certain
FLEXnet Licensing system calls.
-76 "Internal FLEXlm Error - Please report to
LM_INTERNAL_ERROR Acresso Software."

-77 "Bad version number - must be floating point

LM_BAD_VERSION number, with no letters."
A line in the license file has an invalid version number.
lc_checkout() was called with an invalid version
character string.
-78 "FLEXadmin API functions not available."
LM_NOADMINAPI An attempt to get information from another company’s
vendor daemon was made via lc_get_attr(LM_A_VD_*,
...). This function call is only allowed for the vendor’s
own vendor daemon.
-82 "Invalid PACKAGE line in license file."
LM_BADPKG PACKAGE line missing or invalid COMPONENTS.
A COMPONENT has number of licenses set, with
OPTIONS=SUITE.
A COMPONENT has number of licenses==0.
-83 "Version of vendor daemon is too old."
LM_SERVOLDVER Vendor daemon version is older than the FLEXenabled
application’s FLEXnet Licensing version. This is only
supported with a v5.0+ FLEXenabled application.

FLEXnet Licensing Programming and Reference Guide 377

Appendix E - FLEXnet Licensing Status Return Values
Error Number Table

-84 "USER_BASED license has no specified users —

LM_USER_BASED see license server system log."
When a feature has the USER_BASED attribute, this
error occurs when there no INCLUDE line in the end-
user options file for this feature, or the number of users
included exceeds the number authorized. See
“FEATURE /INCREMENT Lines” especially
USER_BASED.
-85 "License server system doesn’t support this
LM_NOSERVCAP request."
This occurs when a vendor daemon with a FLEXnet
Licensing version is older than that in the FLEXenabled
application. The daemon didn’t understand and respond
to the request made by the application.
-87 "Checkout exceeds MAX specified in options
LM_MAXLIMIT file."
End-user option MAX has been specified for this
feature.
-88 "System clock has been set back."
LM_BADSYSDATE Returned from checkout call.
-89 "This platform not authorized by license."
LM_PLATNOTLIC Returned from checkout call where FEATURE line
specifies PLATFORMS=”...”.
-90 "Future license file format or misspelling in
LM_FUTURE_FILE license file."
Returned from checkout call when license file attribute
was introduced in a later FLEXnet Licensing version
than that in the FLEXenabled application.
-91 "Encryption seeds are non-unique."
LM_DEFAULT_SEEDS Returned from lc_new_job() or lp_checkout() when
vendor name is not demo, but encryption seeds are
default encryption seeds.

378 FLEXnet Licensing Programming and Reference Guide

 Appendix E - FLEXnet Licensing Status Return Values
Error Number Table

-92 "Feature removed during lmreread or wrong

LM_SERVER_REMOVED SERVER line hostid."
Checkout failure due to two possible causes. 1) The
feature is removed during lmreread, but the
FLEXenabled application is reading an old copy of the
license file which still has removed feature. 2) The
hostid on the SERVER line is for a different host, so all
features in this license file were removed.
-93 "This feature is available in a different
LM_POOL license pool."
This is a possible response to
LM_A_VD_FEATURE_INFO request, indicating that
this INCREMENT line can be ignored, as it has been
pooled with another line.
-94 "Attempt to generate license with incompatible
LM_LGEN_VER attributes."
Occurs with lmcrypt -verfmt or for lminstall -
overfmt. Also set by lc_cryptstr() and lc_chk_conf().

-95 "Network connect to THIS_HOST failed."

LM_NOT_THIS_HOST Returned by checkout(). When this_host is used as a
host name. Replace this_host with a real host name to
resolve this error.
-96 "License server machine is down or not
LM_HOSTDOWN responding."
Returned by checkout(); indicates the whole license
server system is not up, not just the lmgrd process.
-97 "The desired vendor daemon is down."
LM_VENDOR_DOWN Returned by checkout; indicates lmgrd is running, but
not the vendor daemon.
-98 "This FEATURE line can’t be converted to
LM_CANT_DECIMAL decimal format."
Returned by lc_cryptstr(), lmcrypt, or lminstall. See
“Decimal Format Licenses” for information on what
can’t be converted to decimal format.
-99 "The decimal format license is typed
LM_BADDECFILE incorrectly."
The internal checksum on the decimal line has indicated
the line has been typed incorrectly.

FLEXnet Licensing Programming and Reference Guide 379

Appendix E - FLEXnet Licensing Status Return Values
Error Number Table

-100 "Cannot remove a linger license."

LM_REMOVE_LINGER Returned to lmremove command. User has already
exited, but license is lingering. lmremove doesn’t
remove the linger time.
-101 "All licenses are reserved for others."
LM_RESVFOROTHERS Checkout return value when a checkout will never
succeed, because the end-user options file has all
licenses reserved for others.
-102 "A FLEXid borrow error occurred."
LM_BORROW_ERROR

-103 "Terminal Server remote client not allowed."

LM_TSOK_ERR The feature line does not contain TS_OK to allow
Terminal Server Client usage.
-104 "Cannot borrow that long."
LM_BORROW_TOOLONG The user has specified a borrow period longer than the
license allows.
-105 "Feature already returned to license server
LM_UNBORROWED_ALREADY system."

-106 "License server system is out of network

LM_SERVER_MAXED_OUT connections."
The vendor daemon can’t handle any more users. See the
lmgrd debug log for further information.

-107 "Can’t borrow a PACKAGE component."

LM_NOBORROWCOMP

-110 "Can’t read dongle: check dongle or driver."

LM_NODONGLE In order to read the FLEXid hostid, the correct driver
must be installed. These drivers are available at
www.acresso.com or from your software vendor.
-112 "Missing Dongle Driver."
LM_NODONGLEDRIVER In order to read the FLEXid, the correct driver must be
installed. These drivers are available at
www.acresso.com or from your software vendor.
-114 "SIGN= keyword required but missing from the
LM_SIGN_REQ license certificate."
This is probably because the license is older than the
application. You need to obtain a SIGN= version of this
license from your vendor.

380 FLEXnet Licensing Programming and Reference Guide

 Appendix E - FLEXnet Licensing Status Return Values
Error Number Table

-115 "Error in Public Key package."

LM_PUBKEY_ERROR Rare error.
-116 "TRL not supported for this platform."
LM_NOTRLSUPPORT You are trying to use TRL, but have not installed TRL
keys.
-117 "BORROW failed."
LM_BORROW_LINGER_ERR Borrowing information is invalid.
-118 "BORROW period expired."
LM_BORROW_EXPIRED Borrowed license can no longer be checked out because
it has expired.
-119 "lmdown/lmreread must be run on license server
LM_MUST_BE_LOCAL machine."
When licenses are borrowed, lmdown and lmreread
must be run on the same machine where the license
server is running.
-120 "Cannot lmdown the server when licenses are
LM_BORROW_DOWN borrowed."
When licenses are borrowed, you must shut down a
license server with the
-force option.

-121 "FLOAT_OK requires exactly one dongle hostid."

LM_FLOATOK_ONEHOSTID The hostid to which the FLOAT_OK feature is node-
locked must be a single FLEXid, not a list of FLEXid
hostids.
-122 "Unable to delete local borrow info."
LM_BORROW_DELETE_ERR

-123 "Returning a borrowed license early is not

LM_BORROW_RETURN_EARLY supported."
_ERR This support is enabled in the vendor daemon via the
ls_borrow_early_return variable.

-124 "Error returning borrowed license."

LM_BORROW_RETURN_
SERVER_ERR

-125 "A PACKAGE component must be specified."

LM_CANT_CHECKOUT_
JUST_PACKAGE

FLEXnet Licensing Programming and Reference Guide 381

Appendix E - FLEXnet Licensing Status Return Values
Error Number Table

-126 "Composite Hostid not initialized."

LM_COMPOSITEID_
INIT_ERR

-127 "An item needed for composite hostid missing or

LM_COMPOSITEID_ invalid."
ITEM_ERR

-128 "Error, borrowed license doesn't match any

LM_BORROW_MATCH_ERR known server license."

-135 "Error enabling event log."

LM_EVENTLOG_INIT_ERR

-136 "Event logging is disabled."

LM_EVENTLOG_DISABLED

-137 "Error writing to event log."

LM_EVENTLOG_WRITE_ERR

-139 "Timeout."
LM_TIMEOUT

-140 "Bad message command."

LM_BADCOMMAND

-141 "Error writing to socket. Peer has closed

LM_SOCKET_BROKEN_PIPE socket."

-142 "Attempting to generate version specific

LM_INVALID_SIGNATURE license tied to a single hostid, which is
composite."

-143 "Version-specific signatures are not supported

LM_UNCOUNTED_NOT_ for uncounted licenses."
SUPPORTED

-144 "License template contains redundant signature

LM_REDUDANT_SIGNATURES specifiers."

-145 "Invalid V71_LK signature."

LM_BADCODE_V71_LK

-146 "Invalid V71_SIGN signature."

LM_BADCODE_V71_SIGN

-147 "Invalid V80_LK signature."

LM_BADCODE_V80_LK

-148 "Invalid V80_SIGN signature."

LM_BADCODE_V80_SIGN

382 FLEXnet Licensing Programming and Reference Guide

 Appendix E - FLEXnet Licensing Status Return Values
Error Number Table

-149 "Invalid V81_LK signature."

LM_BADCODE_V81_LK

-150 "Invalid V81_SIGN signature."

LM_BADCODE_V81_SIGN

-151 "Invalid V81_SIGN2 signature."

LM_BADCODE_V81_SIGN2

-152 "Invalid V84_LK signature."

LM_BADCODE_V84_LK

-153 "Invalid V84_SIGN signature."

LM_BADCODE_V84_SIGN

-154 "Invalid V84_SIGN2 signature."

LM_BADCODE_V84_SIGN2

-155 "License key required but missing from the

LM_LQ_REQ license certificate."
The application requires a license key in the license
certificate. You need to obtain a license key version of
this certificate from your vendor.
-156 "Invalid AUTH={} signature."
LM_BADAUTH

-156 "The last valid error number."

LM_LAST_ERRNO

FLEXnet Licensing Programming and Reference Guide 383