Scribd
Upload
58 views2 pages

Coarse Agg Data Sheet

This document contains the results of a coarse aggregate sieve analysis test including: 1. Sieve sizes and weights retained on each sieve 2. Initial and final sample weights and corrected aggregate weight 3. Moisture content calculation using weights of pan, pan+wet aggregate, and pan+dry aggregate 4. Absorption capacity calculation using weights of pan, pan+saturated surface dry aggregate, and pan+dry aggregate 5. Dry rodded unit weight calculation using mold volume, weight of empty mold, and weight of mold filled with aggregate.

Uploaded by

hamza
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
58 views2 pages

Coarse Agg Data Sheet

This document contains the results of a coarse aggregate sieve analysis test including: 1. Sieve sizes and weights retained on each sieve 2. Initial and final sample weights and corrected aggregate weight 3. Moisture content calculation using weights of pan, pan+wet aggregate, and pan+dry aggregate 4. Absorption capacity calculation using weights of pan, pan+saturated surface dry aggregate, and pan+dry aggregate 5. Dry rodded unit weight calculation using mold volume, weight of empty mold, and weight of mold filled with aggregate.

Uploaded by

hamza
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

Coarse Aggregate Sieve Analysis Results

7= 8=(7/Wo)×10 10=100
1 2 3 4 5 = 4-3 6* 9
5+6 0 -9
Sieve
Size Sieve weigh Agg. Cum. %
Siev Correctio Corrected % Cum.
(mm Weigh t w/ Weight % Retained Retaine
e# n Factor Weight (lb) Finer
) t (lb) Agg. (lb) d
(lb)
1" 25
3/4" 19
3/8" 9.5
1/4" 6.3
#4 4.75
Pan -
Sample
Sample
Final
Sample Initial Weight (lb) Corrected ASTM C 33 Size
Weight
Weight (lb)
(lb)
Wo = Wf = Wc = No.

W o−W f
*Corretion Factor= × Column5 Check: Wo = Wc ?!!
Wo

Moisture Content of Coarse Agg.


W1 W2 W3
(lb) (lb) (lb)

Moisture Content (W%)


W% = (W2 – W3)/(W3 – W1)*100
W1=weight of pan
W2=weight of pan and stored aggregate
W3=weight of pan + Oven - dried aggregate after 24 hrs in 105 oC

Absorption Capacity of Coarse Agg.


W1 W2 W3
(lb) (lb) (lb)
Absorption Capacity (S%)
S% = (W2 – W3)/(W3 – W1)*100
W1=weight of pan
W2=weight of pan and Saturated Surface Dry (SSD) aggregate
W3=weight of pan + Oven - dried aggregate after 24 hrs in 105 oC

Dry Rodded Unit Weight


Mold Height Mold Diameter Volume W1 W2 Dry Rodded Unit Weight
(in) (in) (in3) (lb) (lb) (lb/in3)
Dry Rodded Unit Weight = (W2 – W1)/Volume

You might also like