Scribd Logo
Upload

Welcome to Scribd!

  • 19 views

    Measured Qty / Instrument Range Calibration Measurement Capability ( ) Remarks

    Uploaded by

    Ravichandran D
    This document is a calibration certificate from Khosaca Calibration Lab in Chennai, India that is accredited to ISO/IEC 17025:2005. It lists 19 mechanical measurement instruments calibrated at the laboratory, including vernier calipers, micrometers, gauges, and masters for roundness testing and contour measurement. For each instrument, it specifies the measurement ranges and uncertainties in the calibration measurements, which are as low as 0.13 micrometers for some roundness standards.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd

    Measured Qty / Instrument Range Calibration Measurement Capability ( ) Remarks

    Uploaded by

    Ravichandran D
    19 views4 pages
    This document is a calibration certificate from Khosaca Calibration Lab in Chennai, India that is accredited to ISO/IEC 17025:2005. It lists 19 mechanical measurement instruments calibrated at the laboratory, including vernier calipers, micrometers, gauges, and masters for roundness testing and contour measurement. For each instrument, it specifies the measurement ranges and uncertainties in the calibration measurements, which are as low as 0.13 micrometers for some roundness standards.

    Original Title

    khosaca 335

    Copyright

    © © All Rights Reserved

    Available Formats

    DOC, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document is a calibration certificate from Khosaca Calibration Lab in Chennai, India that is accredited to ISO/IEC 17025:2005. It lists 19 mechanical measurement instruments calibrated at the laboratory, including vernier calipers, micrometers, gauges, and masters for roundness testing and contour measurement. For each instrument, it specifies the measurement ranges and uncertainties in the calibration measurements, which are as low as 0.13 micrometers for some roundness standards.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    19 views4 pages

    Measured Qty / Instrument Range Calibration Measurement Capability ( ) Remarks

    Uploaded by

    Ravichandran D
    This document is a calibration certificate from Khosaca Calibration Lab in Chennai, India that is accredited to ISO/IEC 17025:2005. It lists 19 mechanical measurement instruments calibrated at the laboratory, including vernier calipers, micrometers, gauges, and masters for roundness testing and contour measurement. For each instrument, it specifies the measurement ranges and uncertainties in the calibration measurements, which are as low as 0.13 micrometers for some roundness standards.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    of 4

    Laboratory Khosaca Calibration Lab, Chennai

    Accreditation Standard ISO/IEC 17025:2005

    Field Mechanical Calibration Issue Date 03.02.2010

    Certificate Number C-0345 Valid Until 02.02.2012

    Last Amended on - Page 1 of 4

    Measured Qty / Range *Calibration Remarks


    Instrument Measurement
    Capability ()

    AT LABORATORY

    1. Vernier Calipers
    L.C. 0.02 mm Upto 300 mm 27.0 m Using '0' Grade Slip Gauge
    L.C. 0.05 mm Upto 150 mm 65.0 m Blocks & Caliper Checker

    2. Digital Calipers
    L.C. 0.01 mm Upto 300 mm 14.7 m Using '0' Grade Slip Gauge
    Blocks & Caliper Checker

    3. Outside Micrometer
    L.C. 0.01 mm Upto 25.0 mm 7.2 m Using '0' Grade Slip
    L.C. 0.01 mm 25.0 mm - 75.0 mm 7.5 m Gauge Blocks

    4. Digital Micrometer
    L.C. 0.001 mm Upto 25.0 mm 1.6 m Using '0' Grade Slip
    Gauge Blocks

    5. Depth Micrometer Using '0' Grade Slip


    L.C. 0.01 mm Upto 25.0 mm 6.7 m Gauge Blocks

    6. Feeler Gauge Upto 1.00 mm 2.4 m Using Digital Micrometer

    7. Snap Gauge Upto 100 mm 3.8 m Using '0' Grade Slip


    Gauge Blocks

    8. Cylindrical Pins 0.1 mm to 20.0 mm dia. 1.4 m Using P10 Probe


    Laboratory Khosaca Calibration Lab, Chennai

    Accreditation Standard ISO/IEC 17025:2005

    Field Mechanical Calibration Issue Date 03.02.2010

    Certificate Number C-0345 Valid Until 02.02.2012

    Last Amended on - Page 2 of 4

    Measured Qty / Range *Calibration Remarks


    Instrument Measurement
    Capability ()

    9. Cylindrical Plug Gauge Upto 25.0 mm dia 1.4 m Using ULM


    > 25.0mm to 150.0mm dia 1.8 m

    10. Cylindrical Ring Gauge Upto 200 mm dia 3.9 m Using ULM

    11. Thread Plug Gauge


    (for Effective and Upto 125.0 mm 3.0 m Using ULM
    Major Dia. only)

    12. Thread Ring Gauge


    (for Effective Dia. only) Upto 125.0 mm 3.0 m Using ULM

    13. Plunger Dial Gauge Using P25 Probe


    L.C. 0.01 mm Upto 10.0 mm 5.8 m
    L.C. 0.001 mm Upto 25.0 mm 0.8 m

    14. Lever Dial Gauge Using P25 Probe


    L.C. 0.01 mm Upto 0.8 mm 5.8 m
    L.C. 0.002 mm Upto 0.28 mm 1.3 m

    15. LVDT Probe with Display Unit


    L.C. 0.0001 mm Upto 25.0 mm 0.25 m -

    16. Vernier Height Gauge Using Caliper Checker


    L.C. 0.02 mm Upto 300.0 mm 17.6 m
    L.C. 0.01 mm Upto 600.0 mm 8.6 m
    Laboratory Khosaca Calibration Lab, Chennai

    Accreditation Standard ISO/IEC 17025:2005

    Field Mechanical Calibration Issue Date 03.02.2010

    Certificate Number C-0345 Valid Until 02.02.2012

    Last Amended on - Page 3 of 4

    Measured Qty / Range *Calibration Remarks


    Instrument Measurement
    Capability ()

    17. Master for Contouroscope X axis : 100.0 mm 0.9 m -


    Z axis : 56.0 mm (for both X and Y axes)

    18. Masters for Roundness Tester


    a) Roundness Upto 900 m 0.13 m Using Roundness Glass
    Hemisphere
    b) Magnification 2.30%
    c) Straightness Movement with 0.13/200mm Using Cylindrical Squares
    Cylindrical Square

    19. Calibration of Roughness Ra 6.70% Using Surface Roughness


    Standards for Different Rmax 7.00% Tester
    Parameters Rt 6.70%
    Rz 6.70%

    AT - SITE

    1. Vernier Height Gauge


    L.C. 0.02 mm Upto 300.0 mm 17.6 m Using Caliper Checker
    L.C. 0.01 mm Upto 600.0 mm 17.7 m

    2. Profile Projector
    (For Only Linear Movement) 140 mm x 100 mm 3.8 m Using Glass master
    (for both X and Y axes)

    3. Video Measuring System


    (For Only Linear Movement) 140 mm x 100 mm 3.8 m -
    (for both X and Y axes)
    Laboratory Khosaca Calibration Lab, Chennai

    Accreditation Standard ISO/IEC 17025:2005

    Field Mechanical Calibration Issue Date 03.02.2010

    Certificate Number C-0345 Valid Until 02.02.2012

    Last Amended on - Page 4 of 4

    Measured Qty / Range *Calibration Remarks


    Instrument Measurement
    Capability ()

    4. Roundness Tester :
    a) Spindle Roundness Upto 900 m 0.13 m Using Roundness Glass
    with Glass Hemisphere Hemisphere

    b) Amplification with 2.30%


    Magnification Master

    c) Straightness Movement 0.13/200mm Using Cylindrical Squares


    with Cylindrical Square

    5. Contouroscope
    (with Contour Master) X axis : 100.0 mm 0.9m -
    Z axis : 56.0 mm (for both X and Y axes)

    * Measurement Capability is expressed as an uncertainty ( ) at a confidence probability of


    95%

    You might also like