Scribd
Upload
128 views

Service Module Instructions

The document provides instructions for assembling a heat shield for the Command Module of the Apollo/Saturn V. It details attaching concentric ring pieces from outer to inner and stabilizing the shape as the glue dries. Additional parts are then attached to the heat shield and base of the Command Module to complete the assembly.

Uploaded by

Thar Latt
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
128 views

Service Module Instructions

The document provides instructions for assembling a heat shield for the Command Module of the Apollo/Saturn V. It details attaching concentric ring pieces from outer to inner and stabilizing the shape as the glue dries. Additional parts are then attached to the heat shield and base of the Command Module to complete the assembly.

Uploaded by

Thar Latt
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Apollo / Saturn V

Instructions for Service and Command Modules


COMMAND AND SERVICE MODULE

Add detail Parts #2 to #15 as indicated on part #1

23

22

21

20

19
18

17
The Heat Shield is made from a series of concentric circles (rings).

The best way to ensure that the rings will fit together without gaps, is to start by building the outer
ring first (22), then build the inner rings and install them progressively toward the center .

As the glue dries, the heat shield should be placed with the top edge of the outer ring
touching a flat surface, such as a table top. This will help stabilize the shape of the heat shield, and
keep it round as possible. Finish off with the 2mm card dish part 23. Attach to base of the Command Module
21

6
20
1

17

18 10
11

19
8
Glue #17 onto #18

B 16

A
2

Glue #B onto #A x 8
Glue #C, #D, #E, #F, #G, #H, #I, #J 3
and #K onto #18 as indicated
Glue part #3 onto part #2 and then
glue onto part #1 as indicated
Build 4
2

22
united united
states 23
states
5
24
5 Build 16

2 12
13 14
4 15
1
Build 2
united
states

25

You might also like