Scribd
Upload
645 views3 pages

E-Sys - How To Change Werte Values

This document provides instructions for changing werte values in E-Sys v3.18.4. It describes right clicking on a werte value and selecting "Edit" to modify the value in the lower window. It then instructs to click the button on the right to save the new value. Finally, it notes that opening the same file will show the updated werte value name and value, allowing the user to continue with other coding steps.

Uploaded by

Bogdan Codorean
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
645 views3 pages

E-Sys - How To Change Werte Values

This document provides instructions for changing werte values in E-Sys v3.18.4. It describes right clicking on a werte value and selecting "Edit" to modify the value in the lower window. It then instructs to click the button on the right to save the new value. Finally, it notes that opening the same file will show the updated werte value name and value, allowing the user to continue with other coding steps.

Uploaded by

Bogdan Codorean
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

E-Sys v3.18.

How to: Change Werte Values


Continuing from Getting Started: Coding.pdf Step 15…

Step 15b: This time right click on the werte value, Click “Edit”
16b: The option to change the value in the lower window. Change current value with new, Click the button on the right.

Step 17b: Save


Step 18b: Open same file under “File Name:” It shows file name and location

Step 19b: Shows new value name and werte value, continue to step 18 of Getting Started: Coding.pdf

You might also like