Graduation Project Smart system

Assiut University
Faculty of Engineering
Electrical Eng, Department
Communication Section

Graduation Project

Smart system

By
Group of 9 students

For the Academic Year

2010-2011

Advisor

DR: Tark kamal abd-elhameed

1
 Graduation Project Smart system
Overall Idea of the Project:
Smart system is an integration of multiple technologies integrated to offer more flexible
system which coped with the development requirement.
There are prototypes of smart systems as well as smart systems that have reached the
state of commercial products.
In this project we will connect the cell phone to the microcontroller to make a remote
control system through the GSM network and connect the microcontroller directly to the
Ethernet to access to the network and make Telework on the system , and connect the
GPS to the microcontroller and cell phone to achieve the tracking system by sending the
co-ordinates every defined time to the system , and making the security system then
connect all of the microcontroller through a CAN BUS CONTROLLER to make the
communication between all parts of the system, , then using LabView software to make
GUI for the system .
The application of this system is refrigerators test line which check the quality of huge
number of refrigerators at the same time by taking the sensors results through the CAN
BUS then collect them to display on the GUI of the system using LabView software.

Project Contains:

1- CAN BUS CONTROLLER

2- Connect microcontroller TO Ethernet network.
3- Use LabView software to make GUI for the system.
4- Vehicle tracking system by using GPS chip.
5- Connecting microcontroller with cell phone.
6- Security system

2
 Graduation Project Smart system
Refrigerators Production Line Test
Smart System

Security system

User Interface

CAN module
CAN Bus Protocol

GPS

Smart system

Temp. control
Electronic lock

Security system 3
 Graduation Project Smart system
List of project members:

NO Name Mobile E-mail

1- Mahmoud omar sayed 0103510549 [email protected]

2- Yhia abd elrahem sayed 0106668770 [email protected]

3- Yasser samier abd elmonoem 0115232380 [email protected]

4- Mohammed sabry abd elsalam 0100845358 [email protected]

5- Mohammed salah sadek 0163737493 [email protected]

6- Haitham gamal eldeen hamid 0144969388 [email protected]

7- Haitham ahmed bakhet 0118682599 [email protected]

8- Emad Ramadan sayed 0142123820 [email protected]

9- Mohammed khalaf abd-elati 0100677069 [email protected]

Contact Person:
Name Mobile E-mail
Mahmoud omar sayed 0103510549 [email protected]

Supervisor:
Name Mobile E-mail
DR: Tarik kamal abd elhameed 0168099801 [email protected]
0127432372

4
 Graduation Project Smart system

GSM,GPRS

CCNA

Matlab
CDMA
Name Training at

At JELECOM

At JELECOM
1. Assiut University Information Network.
2. Assiut University Central.
3. Participated in Robocon Egypt Competition.
Mahmoud omar 4. Participate in developing and automating
√ √
sayed SCARA Robot using LABVIEW software.
5. Participate in developing and automating the
tensile strength pressure machine using
LABVIEW software.
1. Assiut University Information Network.
Yhia abd elrahem 2. Aluminum Central.
√ √
sayed 3. Assiut University Central.
4. Participated in Robocon Egypt Competition.
1. JELECOM Company.
Yasser samier 2. Telecom Egypt.
√ √ √
abd elmonoem 3. Assiut University Information Network.
4. Assiut University Central.
1. JELECOM Company.
Mohammed 2. Telecom Egypt.
√ √ √
sabry abd elsalam 3. Assiut University Information Network.
4. Assiut University Central.
Mohammed salah 1.Assiut University Information Network.
√ √ √
sadek 2.Assiut University Central.
Haitham gamal 1.Assiut University Information Network.
eldeen hamid √ √ 2.Assiut University Central.
Haitham ahmed 1.Assiut University Information Network.
bakhet √

Emad Ramadan 1.Assiut University Information Network.

√
sayed 2. Telecom Egypt.

Microprocessor and Telecommunication network courses are satisfactorily studied by all of our
team members.

5
 Graduation Project Smart system
Project Members Profile:

Goal of our project:

 Facilitate the control of the production devices (inside and outside the factory).
 Create a new style of management which allows the owner to control all devices
in the system either from inside or outside the company or factory.

Project Components:
1- GPS CHIP.
2- Microcontroller ICs.
3- Cell phones.
4- National instrument (NI USB-6216 DAQ): data acquisition card.
5- IP camera.
6- Keypad 4*4.
7- Sensors.
8- Electronic components.
9- Computer Touch screen.

Budget Projection:
The implementation of the project (building the circuits of the building blocks
mentioned above) requires buying high quality integrated circuits.
Moreover, resistor, capacitors, transformers, regulators and microcontrollers …etc is
required.
So, we expect that the fund required is about 10000 LE.

Need for Funding:

The fund will be used for buying the required components and devices.
Part of the fund will be devoted to the fabrication of the final system and the
preparation of the project book and documentations.