eravap

VAPOR PRESSURE
TESTING AT ITS BEST
Standards
ASTM D5188, D5191, D6377, D6378,
D6897, EN 13016-1, EN 13016-2,
EN 13016-3

Fuel specifications
ASTM D910, D1655, D4814,
D6227, EN 228

EPA, CCQTA reference instrument

CARB, NATO, US Military approved

Density
Optional built-in high precision
ASTM D4052 density meter

www.eralytics.com/eravap
 Applications

eravap ERAVAP's applications range from vapor pressure testing

of gasoline, aviation fuel, crude oil and liquified petroleum
gas (LPG) to any other organic or aqueous solvent. It is also

combines the ideal solution for R&D applications due to its versatile
configurability and various available add-on modules.
ERAVAP is used in several hundred laboratories around

maximum the world and is field-proven by installations inside mobile

laboratories.

precision Piston Based Measurement

This leading-edge measurement principle in vapor pressure

with solid
testing makes an external vacuum pump obsolete. The built-in
piston draws in the sample at the beginning of the
measurement. The piston then creates a vacuum by expanding

durability
the headspace above the sample to the predefined vapor to
liquid (V/L) ratio. Then the sample is regulated to the
measurement temperature and the result is displayed on the
.
large color touchscreen.

Unmatched Performance
Powerful Peltier elements make ERAVAP the only vapor
pressure tester on the market covering a temperature range
from -20 °C to 120 °C (4 °F to 248 °F).

ERAVAP's Pure SamplingTM valve technology minimizes any

cross-contaminations. Its high precision pressure sensor
allows repeatabilites of r ≤ 0.15 kPa for pure substances
clearly outperforming international standard methods.

sample measuring cell

inlet valve liquid phase
manifold gas phase
outlet valve piston with pressure sensor
waste container temperature sensor
ERAVAP - The First Choice
for Fuel Applications
Regardless of the selected measuring method and the
analyzed sample: ERAVAP covers them all. Starting from
the gasoline methods, ASTM D5191 (air saturated total
vapor pressure, single expansion method) and ASTM D6378
(absolute vapor pressure, triple expansion method), up to the
vapor-liquid ratio temperature determination method ASTM
D5188 and the vapor pressure testing of LPG according to
ASTM D6897. For maximum sample throughput, ERAVAP
can be equipped with eralytics directly attached
10-position autosampler.

TVSTM - ASTM D5191

Temperature Verification
Sensor
ERAVAP’s optional TVSTM (patent pending) allows for the
fully automated monitoring of the sample temperature directly
inside the sample container, featuring an immediate check of
the sample preparation even before the actual measurement.
In combination with ERAVAP’s built-in QC control charts
(ASTM D6299) offering the setting of predefined warning
levels, the full compliance even with strictest quality control
standards is ensured in your lab at any time.

Low Vapor Pressure Module

With eralytics optional LowVP Module (r<0.1 kPa) the
measurement of low vapor pressure substances, like solvents
or chemicals for MSDS purposes (material safety data sheets)
or other official regulations (e.g. REACH) is an easy task. This
method is based on the triple expansion method ASTM D6378
using ERAVAP’s built-in high performance shaker to ensure
complete thermodynamic equilibrium at each expansion step,
leading to an excellent correlation to the established but manual
and time-consuming isoteniscope method ASTM D2879.
Comfortable and Reliable:
ERAVAP for Crude Oil Testing
The vapor pressure of crude oil is a key parameter when
planning the transportation of crudes through different climate
zones. ERAVAP fully complies to the most common crude oil
methods, such as ASTM D6377, IP481 and GOST 52340 and
allows measuring at variable V/L ratios between 0.02 – 4.00.
Additionally, curve measurement programs at various V/L
ratios are available, including the TVP method (True vapor
pressure) which calculates the theoretical VPCR at V/L = 0.

ERAVAP
Manual Piston Cylinder WELKER® FPC

Measuring live crudes containing high amounts of volatiles

requires the use of a pressurized sampling system, such as
floating piston cylinders (FPC) or manual piston cylinders
(MPC). If such crudes are measured from an open container
the resulting vapor pressure will be biased due to the loss of
volatile material.

ERAVAP is equipped with a pressure-tight quick fit

connection system including an integrated inlet filter for an
easy connection to piston cylinders, like eralytics uniquely ERAVAP MPC

designed ERAVAP MPC (ASTM D8009). With its built-in high

performance shaker motor ERAVAP ensures the fast formation
of pressure equilibrium.

High Viscosity Module

eralytics‘ high viscosity module allows the measurement of
even highly viscous samples. By heating the inlet, outlet and
all connecting tubes as well as the inlet assembly up to 70°C
this optional module makes ERAVAP the perfect analyzer for
challenging samples such as fuel oil or heavy crudes without
risking clogging of the equipment.
ERAVAP: The Benchmark for Instrument Models
Standard and Special ERAVAP (EV10)
Applications Temperature range: 0 °C – 120 °C (32 °F – 248 °F)
Pressure range: 0 kPa – 1000 kPa (0 psi – 145 psi)
Depending on the application ERAVAP is available in two
versions. The standard model ERAVAP measures with a
ERAVAP LPG (EV20)
1000 kPa high precision pressure sensor and is the perfect
Temperature range: 0 °C – 120 °C (32 °F – 248 °F)
solution for most applications. For special applications like
Pressure range: 0 kPa – 2000 kPa (0 psi – 290 psi)
vapor pressure testing of liquified petroleum gas (propane,
and propane/butane mixtures) ERAVAP LPG is your
instrument of choice featuring an extended pressure range Optional Equipment
up to 2000 kPa.
Density Meter Module for EV10
High precision density meter (r = 0.0001 g/cm³)
2-in-1: Vapor Pressure + Density
Autosampler
with One Single Analyzer Directly attached optional
The new temperature-controlled, ultra-light (< 1 kg) U-tube 10-position autosampler
density meter module DENS4052 (patent pending) offers
density measurements in full compliance with ASTM D4052 & Temperature Verification Sensor TVSTM
ISO 12185 (r = 0.0001 g/cm3). ERAVAP is now the only vapor for EV10 and EV20
pressure tester on the market which allows for simultaneous Automated monitoring of sample temperature
measurements of two parameters listed in international fuel
specifications like ASTM D4814 and EN 228 in a single Pressurized Sample Containers for EV10 and EV20
analyzer, namely the vapor pressure of gasoline according Floating piston cylinder (ASTM D3700)
to ASTM D5191 and the density of gasoline, diesel or jet fuel Manual piston cylinder (ASTM D8009)
according to ASTM D4052. Its portable and rugged design
makes ERAVAP the ultimate solution for mobile laboratories, High Viscosity Module for EV10 and EV20
terminals, and field use. Heated inlet and outlet for measuring highly
viscous samples

Low Temperature Module for EV10

Temperature range extension:
-20 °C – 120 °C (-4 °F – 248 °F)

Low Vapor Pressure Module for EV10

Excellent correlation to Isoteniscope
method ASTM D2879
Technical Specifications of eravap
ASTM D4052, D5188, D5191, D6377, D6378, D6897, D6299 (QC charts); EN 13016-1, EN 13016-2,
EN 13016-3; IP394, IP409, IP481; JIS K2258-2; SHT 0769, SHT 0794; SNT 2932; GOST 52340;
Available Test Methods
freely programmable methods; EPA / CARB / CCQTA / US Military and NATO reference methods,
TVP measurement VP-V/L Speed TestTM – Combined T(V/L) and vapor pressure measurement

Correlation to ASTM D323, D1267, D2533, D4953, D5190, D5482, D2879 (optional low vapor pressure extension)

Fuel Specifications ASTM D910, D1655, D4814, D6227; EN 228

Built-in shaker for crude oil and accelerated V/L measurements

Hardware Features
Pure SamplingTM valve technology for minimized cross-contaminations
0 °C – 120 °C (32 °F – 248 °F) with Peltier technology – No external cooling required
Temperature Range Optional extension EV01-COOL: -20 °C – 120 °C (-4 °F – 248 °F) – External cooling required
Extrapolated range: -100 °C – 300 °C (-148 °F – 572 °F)

Temperature Stability 0.01 °C (0.02 °F)

EV10 ERAVAP: 0 kPa – 1 000 kPa (0 psi – 145 psi) – High precision pressure transducer
Pressure Range
EV20 ERAVAP LPG: 0 kPa – 2 000 kPa (0 psi – 290 psi) – Extended range pressure transducer

Pressure Resolution 0.01 kPa (0.0014 psi)

Density Meter (0-3 g/cm3)

High precision density module (r = 0.0001 g/cm3; ASTM D4052)
Temp. controlled oscillating U-tube

Vapor / Liquid Ratio Variable from 0.02/1 – 100/1 (Method dependend)

Repeatability: r ≤ 0.15 kPa (0.022 psi) measured with cyclopentane @ 37.8 °C

Precision
Reproducibility: R ≤ 0.5 kPa (0.073 psi)

Sample Introduction Automated via built-in piston – No external vacuum pump required; 80 µm reusable filter

Sample Volume 1 mL (2.2 mL per rinsing cycle)

Measurement Time 5 minutes for a standard measurement

Built-in PC with Ethernet, front and rear USB and RS232 interfaces; Wifi via USB dongle
Interfaces Direct LIMS connectivity via LAN, output to printer or PC and export as CSV or PDF
Optional input by external keyboard, mouse and barcode reader

Remote Control Remote service capability via Ethernet interface

ERASOFT RCS – remote control Windows® software for multi-instrument remote control,
PC Software
convenient data transfer and result analysis
Auto-switching 85 – 264 V AC, 47 – 63 Hz, max. 150 W (multi-voltage power supply)
Power Requirements
Field application: 12 V DC (vehicle battery) adapter available

Dimensions (W x H x D) / Weight 29 x 35 x 34 cm (11.4 x 13.8 x 13.4 in) / 9.7 kg (21.4 lb)

Due to continuing product development, specifications are subject to change.

All eralytics products are manufactured under ISO 9001 regulations and are CE, ROHS and UL/CSA compliant. www.eralytics.com/eravap

eralytics instruments are available worldwide. Lohnergasse 3, 1210 Vienna, Austria

An international network of over 50 authorized and well-trained distributors Phone: +43 1 890 50 330
is ready to answer your inquiries and to offer local support and service. Fax: +43 1 890 50 3315
www.eralytics.com/distribution [email protected]
2001-1

www.eralytics.com