Scribd
Upload
178 views4 pages

HW12 W2020

This document contains 7 homework problems about determining stresses at various points in machine elements and structures when subjected to different loading conditions. Students are asked to calculate normal stresses, shear stresses, principal stresses and maximum shear stresses at labeled points considering given force values and structural dimensions and configurations. Answers are requested for each problem.

Uploaded by

MPRaj
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
178 views4 pages

HW12 W2020

This document contains 7 homework problems about determining stresses at various points in machine elements and structures when subjected to different loading conditions. Students are asked to calculate normal stresses, shear stresses, principal stresses and maximum shear stresses at labeled points considering given force values and structural dimensions and configurations. Answers are requested for each problem.

Uploaded by

MPRaj
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

ENGTECH 3ML3 Home work Week 12

1 A 6-kip force is applied to the machine element AB as shown. Knowing that the uniform thickness of
the element is 0.8 in., determine the normal and shearing stresses at (a) point a, (b) point b, (c) point c.

Ans:

2 Several forces are applied to the pipe assembly shown. Knowing that the pipe has inner and outer
diameters equal to 1.61 and 1.90 in., respectively, determine the normal and shearing stresses at (a)
point H, (b) point K.

Ans:

3 A 13-kN force is applied as shown to the 60-mm-diameter cast-iron post ABD. At point H, determine
(a) the principal stresses and principal planes, (b) the maximum shearing stress.
Ans:

4 Forces are applied at points A and B of the solid cast-iron bracket shown. Knowing that the bracket has
a diameter of 0.8 in., deter-mine the principal stresses and the maximum shearing stress at (a) point H
and (b) Point K.

5 Three steel plates, each 13 mm thick, are welded together to form a cantilever beam. For the loading
shown, determine the normal and shearing stresses at points a and b.
Ans:

6 Two forces P1 and P2 are applied as shown in directions perpendicular to the longitudinal axis of a
W310 X 60 beam. Knowing that P1 = 25 kN and P2 = 24 kN, determine the principal stresses and the
maximum shearing stress at point a.

Ans:

Ans:
10

You might also like