Direct solenoid and solenoid pilot operated valves

Series 55
Individual mounting Series
inline

35

Manual operator
100
Sealed solenoid
enclosure
200
55
56
Pilot filter 57
58
Pilot exh.
Ext. pilot port Ext. pilot 59
Pilot housing U cup Internal pilot
supply
Pilot cartridge
Pilot piston
Check valve 45
3
EXH.
3
EXH.

2 2
1
IN
700
Accumulator CYL. CYL.

1
Precision ground molded, IN 900
balanced spool
Normally closed main
spool shown
82
Air/spring return

6300

SERIES FEATURES 6500

6600
• The patented MACSOLENOID® with its non-burn out feature on AC service.
• Balanced spool unaffected by back pressure in the exhaust or by inlet restrictions. 1300
May be plugged for 2-way operation.
• A large checked accumulator which supplies the pilot and air/spring return for consistent shifting. 800
• Use on lube or non-lube service.
• Extremely rapid response and cycle rate. ISO 1
• Various types of manual operators and solenoid enclosures.
• Optional low wattage DC solenoids down to 1 watt.
ISO 2
ISO 3
MAC125A
MAC250A
MAC500A

45 Consult “Precautions” page 356 before use, installation or service of MAC Valves.
 100% WARRANTY

OF
PRODUCTION
TESTED

100%
18 MONTHS

Series 55

VALVE CONFIGURATIONS AVAILABLE • Ability to use a pilot signal pressure different from the main valve pressure. Pilot signal
• 3-Way Normally Open or Normally Closed (solenoid or remote air). can be from 30 to 150 PSI, regardless of main valve pressure.
• 2-Way (by plugging a port) Normally Open or Normally Closed (solenoid or remote air). • A manual operator and position indicator standard.
• Internal pilot or External pilot for vacuum to 30 PSI main valve pressures on solenoid or
SPECIAL APPLICATIONS:
25 on remote air operated models. Manual and mechanical operators available.
• VACUUM APPLICATIONS: Connect the vacuum source to port #3 with port #1 open to
SERIES FEATURES-REMOTE AIR PILOT OPERATED VALVES atmosphere, and use external pilot on solenoid pilot operated models. On remote air
These air versions feature: pilot models, use -RE.
• A large checked accumulator for air/spring return. • SELECTOR APPLICATIONS: Pipe higher pressure to port #1 and lower pressure to port #3.
• Balanced spool unaffected by back pressure in the exhaust or by inlet restrictions. • INTERNAL PILOT: Use for main valve pressure of 30 to 150 PSI on all models. Includes
May be plugged for 2-way operation. ball check in the body and an M5x0.8 plug installed in the external pilot port.
• Use on lube or non-lube service. • EXTERNAL PILOT: An external pilot supply is required when main valve pressures are
lower than 30 psi on solenoid pilot or 25 psi on remote air pilot operated models. To
SERIES FEATURES-REMOTE AIR PILOT, PILOT OPERATED
VALVES convert from internal to external pilot on solenoid models simply rotate pilot housing
These special air versions have the same features as the remote air pilot operated 180 degrees and connect external pilot source. (Use either M5 or#10-32 fitting.) On
models, but additionally feature: remote air pilot models, specify -RE.

46 Consult “Precautions” page 356 before use, installation or service of MAC Valves.
 Direct solenoid and solenoid pilot operated valves

Series 55
Function Port size Flow (Max) Individual mounting Series
3/2 NO-NC, 2/2 NO-NC 1/4” - 3/8” 2.2 Cv inline

OPERATIONAL BENEFITS

1. Balanced spool, immune to variations of

pressure.
7. Wiping effect eliminates sticking.
8. Pilot valve with balanced poppet, high flow,
35
2. Short stroke with high flow. short and consistent response times.
3. The piston (booster) provides maximum
shifting forces.
4. Checked accumulator guarantees maximum 100
pilot pressure.
5. Powerful return force thanks to the
combination of mechanical and air springs. 200
6. Bonded spool with minimum friction, shifting
in a glass-like finished bore.
55
56
HOW TO ORDER 57
Port size Pilot air NC valve NO valve 58
CYL CYL
59
IN EXH IN EXH

1/4” NPTF Internal 55B-11-PI-XXYZZ 55B-21-PI-XXYZZ

3/8” NPTF 55B-12-PI-XXYZZ 55B-22-PI-XXYZZ
45
1/4” NPTF External 55B-11-PE-XXYZZ 55B-21-PE-XXYZZ
3/8” NPTF 55B-12-PE-XXYZZ 55B-22-PE-XXYZZ

SOLENOID OPERATOR ® XX Y ZZ * 700

XX Voltage Y Manual operator ZZ Electrical connection

900
11 120/60, 110/50 1 Non-locking JB Rectangular connector
12 240/60, 220/50 2 Locking JD Rectangular connector with light
22 24/60, 24/50 JA Square connector 82
59 24 VDC (2.5 W) JC Square connector with light
87 24 VDC (17.1 W) BA Flying leads (18”)
61 24 VDC (8.5 W) CA Conduit 1/2” NPS
6300
* Other options available, see page 349.
6500
6600
1300
800
ISO 1
ISO 2
ISO 3
MAC125A
MAC250A
MAC500A

47 Consult “Precautions” page 356 before use, installation or service of MAC Valves.
 100%
18
WARRANTY

OF
PRODUCTION
TESTED

100% MONTHS

Series 55

technical data

Fluid : Compressed air, vacuum, inert gases

Pressure range : Internal pilot : 30 to 150 PSI
External pilot : vacuum to 150 PSI
Pilot pressure : 30 to 150 PSI
Lubrication : Not required, if used select a medium aniline point lubricant (between 180°F and 210°F)
Filtration : 40 µ
Temperature range : 0°F to 120°F (-18°C to 50°C)
Flow (at 6 bar, ∆P=1bar) : Norm. Closed :1/4” (1.4 Cv), 3/8” (1.6 Cv), Norm. Open : 1/4” (1.8 Cv), 3/8” (2.2 Cv)
Leak rate : 100 cm3/min
Coil : General purpose class A, continuous duty, encapsulated
Voltage range : -15% to +10% of nominal voltage
Protection : Consult factory
Power : ∼ Inrush : 14.8 VA Holding : 10.9 VA
= 1 to 17 W
Response times : 24 VDC (8.5 W) Energize : 9 ms De-energize : 4.8 ms
120/60 Energize : 5-11 ms De-energize : 5-11 ms

Spare parts : • Solenoid operator (power ≥ 4 W) : D1-XXAA, cover mounting screws 35206 and seal 16234.
• Pilot valve : PID-XXYZZ, including mounting screws 35214 and seal 16363. • Check valve : 70061.

Options : • BSPP threads.

Dimensions shown are metric (mm)

dimensions

56,0

2 MTG. HOLES
Ø 6,6 mm INLET & CYL PORTS
EXT
PILOT
112,5
EXHAUST PORT.
3/8”

2 1
43,7
38,0
26,0

23,5
44,5
29,5
56,0

46,0

48 Consult “Precautions” page 364 before use, installation or service of MAC Valves
 O p t i o n s

OPTIONS

Codification table for voltages / Manual operator / Electrical connection / Wire length

VALVE CODE ® - XX Y ZZ (-VV)

1 2 3 4

OPTIONS AVAILABLE FOR OPTIONS AVAILABLE FOR

- valves type 100 Series - valves type 200 Series

- pilot valves "CNOMO"

- Pilot operated valves with pilots type 100 Series - pilot operated valves with pilots type 200 Series
Series : 55 - 56 - 700 - 800 - 900 Series : 200 - 57 - 58 - 59.
- 6300 - 6500 - 6600 - 1300
- ISO 1 - ISO 2 - ISO 3.
- MAC 125 - MAC 250 - MAC 500

- Pilot operated valves with pilots "CNOMO"

Series : ISO1 - ISO2 - ISO3

349 Consult “Precautions” page 356 before use, installation or service of MAC Valves.
 OPTIONS

Used on valve series: 100, 55, 56, 700, 800, 900, 6300, 6500, 6600, 1300, MVA1C, Used on valve series: 200, 57, 58, 59.
MVA2B, MVA3B, MAC125, MAC250, MAC500.
1. VOLTAGE (100 Serie type coil) 1. VOLTAGE (200 Serie type coil)

- XX Y ZZ VOLTAGE - XX Y ZZ VOLTAGE
11 120/60, 110/50 11 120/60, 110/50, 24 VDC (6 W)
12 240/60, 220/50 12 240/60, 220/50
13 100/60, 100/50 13 100/60, 100/50
15 200/60, 200 /50 14 200/60, 200/50
16 10/60 20 6/60
20 6/60 21 12/60
21 12/50, 12/60 22 24/60, 24/50
22 24/60, 24/50 23 32/60, 32/50
23 32/60, 32/50 24 48/60, 42/50
24 48/60, 42/50 25 240/50
26* 380/50, 440/50, 440/60, 480/60 26 480/60, 440/50
29 220/60 27 127/60
34 127/50, 120/50 28 415/50
35 48/50 29 220/60
36 16/60 30 380/50
B1 24/50 31 550/60, 550/50
50 24 VDC (6 W) 32 120/60, 110/50
51 24 VDC (4 W) 33 600/60
54 12 VDC (4 W) 34 127/50
55 12 VDC (6 W) 35 48/50
57 12 VDC (2.5 W) 50 24 VDC (6 W)
59 24 VDC (2.5 W) 51 24 VDC (4.5 W)
60 12 VDC (8.5 W) 52 24 VDC (2.5 W)
61 24 VDC (8.5 W) 53 24 VDC (1.0 W)
64 6 VDC (6 W) 55 12 VDC (6 W)
65 32 VDC (7 W) 57 12 VDC (2.5 W)
66 48 VDC (5.8 W) 58 48 VDC (2.5 W)
67 64 VDC (7.5 W) 60 12 VDC (9.5 W)
68 120 VDC (6.4 W) 61 24 VDC (8.5 W)
69* 220 VDC (8.7 W), 250 VDC (11.2 W) 64 6 VDC (8.5 W)
75 90 VDC (8.8 W) 65 32 VDC (10 W)
76* 100 VDC (6.9 W) 66 48 VDC (11.5 W)
84* 125 VDC (10.9 W) 67 64 VDC (10.5 W)
87* 24 VDC (17.1 W) 68 120 VDC (12.3 W)
88* 12 VDC (17.4 W) 69 250 VDC (9.2 W)
89* 36 VDC (18.8 W) 71 8 VDC (8.2 W)
90 28 VDC (8.2 W) 72 24 VDC (12 W)
91* 6 VDC (10.6 W) 73 198 VDC (10 W)
92 190 VDC (6.5 W) 74 72 VDC (11.3 W)
94 3 VDC (7 W) 75 90 VDC (11.3 W)
95 38 VDC (6.4 W) 76 100 VDC (9 W)
A1 24 VDC (1 W) 77 220 VDC (10 W), 230 VDC (11.6 W)
A2 12 VDC (1 W) 78* 24 VDC (24 W)
A3 9 VDC (1 W) 80 55 VDC (10.6 W)
MOD. DD01 : Protection diode (DC) - MAX. 8.5W 82 170 VDC (11.1 W)
MOD. MOV1 : Protection varistor (AC) - MAX. 8.5W 83 15 VDC (8.1 W)
* Voltages are CLSF only 84 125 VDC (10 W)
86 36 VDC (11 W)
93* 12 VDC (24 W)

350 Consult “Precautions” page 356 before use, installation or service of MAC Valves.
 O p t i o n s

OPTIONS

2. MANUAL OPERATOR (Common options for 100 & 200 Series type coils)

- XX Y ZZ MANUAL OPERATOR
0 No operator 5* No Operator with Light
1 Non-locking recessed 6* Non-Locking Recessed with Light
2 Locking recessed 7* Locking Recessed with Light
3 Non-locking extended 8* Non-Locking Extended with Light
4 Locking extended 9* Locking Extended with Light
* Lights used with “AA” electrical connection

3. ELECTRICAL CONNECTION (100 Serie type coil) 3. ELECTRICAL CONNECTION (200 Serie type coil)

- XX Y ZZ ELECTRICAL CONNECTION - XX Y ZZ ELECTRICAL CONNECTION

AA Wiring box with 1/2" NPS conduit AA Wiring box with 1/2" NPS conduit
BA Flying leads BA Flying leads
CA 1/2" NPS conduit CA 1/2" NPS conduit
CC 1/2" NPT conduit CC 1/2" NPT conduit
FA Military type 2 PIN EA Explosion proof (200 Series)
GA Military type 3 PIN EA Explosion proof (57, 58 & 59 Series)
HA AA with ground wire FA Military type 2 PIN
JA* Square connector GA Military type 3 PIN
JB Rectangular connector HA AA with ground wire
JC* Square connector with light JA* Square connector
JD Rectangular connector with light JC Square connector with light
JE Square connector on top JJ Square connector, male only
(ISO2, ISO3) NA CA with ground wire
JF Rectangular connector on top NC CC with ground wire
(ISO1, ISO2, ISO3)
JG JE with light
JH JF with light
JJ Square connector, male only
JM Rectangular connector, male only
MA Electrical common conduit
(100 Series-Manifold/900 Series)
MB Electrical common conduit
(100 Series-Stacking/700 Series)
NA CA with ground wire
NC CC with ground wire
RA 3/8" NPS conduit
* Not to be used with 100, 800 and 900 Series manifold mounting

351 Consult “Precautions” page 356 before use, installation or service of MAC Valves.
 OPTIONS

4. COIL WIRE LENGTH (Common options for 100 & 200 Serie type coils)

- XX Y ZZ (-VV) WIRE LENGTH

AA 18”
AB 24”
AD 36”
AE 48”
AF 72”
AG 6”
AR 12”
AU 120”
BA 60”
BB 144”
Series 6000 : wire length, from the base
MOD L024 24”
MOD L036 36”
MOD L048 48”
MOD L060 60”
MOD L072 72”
MOD L120 120”

352 Consult “Precautions” page 356 before use, installation or service of MAC Valves.