Scribd Logo
Upload

Welcome to Scribd!

  • 72 views

    CHB Perimeter Wall 1A

    Uploaded by

    leanne Despa
    This document provides specifications for a reinforced concrete beam and masonry wall structure. It specifies that class A concrete will be used for footings, columns, and tie beams, while class AA concrete will be used for the beam. The 100mm thick masonry wall will have class B concrete for its core fill and mortar. Reinforcements will be limited to market sizes of 6m and 7.5m. Plaster thickness is specified at 16mm for walls and 12mm for columns and beams, using class B concrete mix. Vertical and horizontal spacing of wall reinforcements is 80cm and 60cm respectively. Tie wire length is 0.3m. Formworks cannot be reused.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    CHB Perimeter Wall 1A

    Uploaded by

    leanne Despa
    72 views1 page
    This document provides specifications for a reinforced concrete beam and masonry wall structure. It specifies that class A concrete will be used for footings, columns, and tie beams, while class AA concrete will be used for the beam. The 100mm thick masonry wall will have class B concrete for its core fill and mortar. Reinforcements will be limited to market sizes of 6m and 7.5m. Plaster thickness is specified at 16mm for walls and 12mm for columns and beams, using class B concrete mix. Vertical and horizontal spacing of wall reinforcements is 80cm and 60cm respectively. Tie wire length is 0.3m. Formworks cannot be reused.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides specifications for a reinforced concrete beam and masonry wall structure. It specifies that class A concrete will be used for footings, columns, and tie beams, while class AA concrete will be used for the beam. The 100mm thick masonry wall will have class B concrete for its core fill and mortar. Reinforcements will be limited to market sizes of 6m and 7.5m. Plaster thickness is specified at 16mm for walls and 12mm for columns and beams, using class B concrete mix. Vertical and horizontal spacing of wall reinforcements is 80cm and 60cm respectively. Tie wire length is 0.3m. Formworks cannot be reused.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    72 views1 page

    CHB Perimeter Wall 1A

    Uploaded by

    leanne Despa
    This document provides specifications for a reinforced concrete beam and masonry wall structure. It specifies that class A concrete will be used for footings, columns, and tie beams, while class AA concrete will be used for the beam. The 100mm thick masonry wall will have class B concrete for its core fill and mortar. Reinforcements will be limited to market sizes of 6m and 7.5m. Plaster thickness is specified at 16mm for walls and 12mm for columns and beams, using class B concrete mix. Vertical and horizontal spacing of wall reinforcements is 80cm and 60cm respectively. Tie wire length is 0.3m. Formworks cannot be reused.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    RC Beam

    7.00

    Masonry Wall

    SPECIFICATIONS:
    1. FOOTINGS COLUMNS AND TIE BEAM
    SHALL BE CLASS A CONCRETE MIX AND BEAM
    SHALL BE CLASS AA CONCRETE MIX
    Tie Beam 2. MASONRY WALL SHALL BE 100MM THICK
    4.50

    AND SHALL HAVE CLASS B CONCRETE MIX FOR


    THE CORE FILL AND MORTAR. REFER TO
    APPROPRIATE TABLE
    3. ALL STEEL REINFORCEMENTS SHALL
    HAVE AN AVAILABLE MARKET SIZE LIMITED TO
    6M AND 7.5M ONLY
    4. PLASTER FOR WALLS SHALL BE 16MM
    AND FOR COLUMNS AND BEAM SHALL BE 12MM
    BOTH MAKING USE OF CLASS B CONCRETE MIX.
    REFER TO APPROPRIATE TABLE
    5. VERTICAL AND HORIZONTAL SPACING
    FOR MASONRY WALL REINFORCEMENTS SHALL
    BE 80CM AND 60CM RESPECTIVELY
    6. LENGTH OF TIE WIRE FOR ALL
    REINFORCEMENT CONNECTION SHALL BE 0.3M
    7. NEGLECT SWELL FACTOR FOR
    1.30

    EXCAVATED SOIL
    8. FORMWORKS SHALL NOT BE REUSED

    0.50
    0.35

    FRONT ELEVATION
    SCALE 1:50 MTS.

    PROJECT TITLE CONFORME REVISIONS SHEET NO.

    CIVIL ENGINEER

    PRC No. Valid Until PRC No. Valid Until


    PROPOSED ALAD MARIA LEONORA TERESA MADLANGTUTA S
    PTR No. Date PTR No. Date
    1 2
    Place TIN
    SEAL
    Place TIN
    LOCATION MAPUKPUKAW ST. DI MABIRBIRUKAN CITY OWNER

    You might also like